Cadmium sulfide nanoparticles-assisted intimate coupling of microbial and photoelectrochemical processes: Mechanisms and environmental applications

Revisiting Solar Energy Flow in Nanomaterial-Microorganism Hybrid Systems

Nanomaterial-microorganism hybrid systems (NMHSs), integrating semiconductor nanomaterials with microorganisms, present a promising platform for broadband solar energy harvesting, high-efficiency carbon reduction, and sustainable chemical production. While studies underscore its potential in diverse solar-to-chemical energy conversions, prevailing NMHSs grapple with suboptimal energy conversion efficiency. Such limitations stem predominantly from an insufficient systematic exploration of the mechanisms dictating solar energy flow. This review provides a systematic overview of the notable advancements in this nascent field, with a particular focus on the discussion of three pivotal steps of energy flow: solar energy capture, cross-membrane energy transport, and energy conversion into chemicals. While key challenges faced in each stage are independently identified and discussed, viable solutions are correspondingly postulated. In view of the interplay of the three steps in affecting the overall efficiency of solar-to-chemical energy conversion, subsequent discussions thus take an integrative and systematic viewpoint to comprehend, analyze and improve the solar energy flow in the current NMHSs of different configurations, and highlighting the contemporary techniques that can be employed to investigate various aspects of energy flow within NMHSs. Finally, a concluding section summarizes opportunities for future research, providing a roadmap for the continued development and optimization of NMHSs.

Illuminated fulvic acid stimulates denitrification and As(III) immobilization in flooded paddy soils via an enhanced biophotoelectrochemical pathway

Fulvic acid (FA) is a representative photosensitive dissolved organic matter (DOM) compound that occurs naturally in paddy soils. In this study, the effect of a FA + nitrate treatment (0, 4 and 8 mg/L FA + 20 mmol/L nitrate) on denitrification and As(III) immobilization in flooded paddy soils was assessed under dark and intermittently illuminated conditions (12 h light+12 h dark). The FA input stimulated denitrification in illuminated soils (~100 % of nitrate removal within 6 days) compared to dark conditions (~92 % nitrate removal after 6 days). Meanwhile, As(III) (initial concentration of 0.1 mmol/L) was nearly completely immobilized (~100 %) under illuminated conditions after 4 days for the FA + nitrate treatment compared to 90- 93 % retention in the dark. Denitrification and As immobilization were positively related to the FA dosage in the illuminated assays. The stronger denitrification in illuminated soils was ascribed to denitrifiers harvesting photoelectrons from photosensitive substrates/semiconducting minerals. FA addition also increased the activities of denitrifying enzymes (e.g., NAR, NIR and NOR) and the denitrification electron transport system by nearly 0.6-0.7 and 1.5-1.8 times that of the nitrate-alone treatment under illuminated and dark conditions, thereby fostering stronger denitrification. Upon irradiation, As(III) immobilization was not only stimulated by the interactions with the denitrification pathway whereby As(III) acts as an electron donor for denitrifiers, but was also modulated by Fe(III)/oxidative reactive species-derived photooxidation of As(III). Moreover, the FA + nitrate treatment promoted the enrichment of metal-oxidizing bacteria (e.g., Stenotrophomonas and Acidovorax) that are responsible for nitrate-dependent As(III)/Fe(II) oxidation. The results of this study enhance our understanding of interactions among the biogeochemical cycles of As, Fe, N and C, which are intricately linked by a biophotoelectrochemical pathway in flooded paddy soils.

Extracellular self-photosensitizer combined with metal oxide-based nano bio-hybrid system encapsulated by alginate improves hydrogen production in the presence of oxygen

The photocatalytic nano-biohybrid systems have great potential for the conversion of solar energy to fermentative hydrogen production. Herein, a whole-cell nano-biohybrid system consisting of biosynthesized cadmium sulfide, Enterobacter aerogenes cells, and metal oxide nanoparticles was constructed. The system was encapsulated with sodium alginate and used for light-driven biohydrogen production under anaerobic and in the presence of oxygen conditions. After 48 h incubation in the presence of oxygen, the E. aerogenes cells with the encapsulated hybrid system yielded 2.7 mmol H2/mmol glucose, a 13.5-fold higher than that of the E. aerogenes cells without encapsulation. The encapsulated hybrid system could produce hydrogen for up to 96 h and could produce hydrogen even under natural sunlight conditions. These results revealed that efficient hydrogen production is possible in the presence of oxygen. Overall, the present study demonstrated the potential of using proper nano-biohybrid system with encapsulation for the production of hydrogen under ambient air condition.

Novel approaches to energize microbial biocatalysts

An efficient and cheap energization of microbial biocatalysts is essential in current biotechnological processes. A promising alternative to the use of common organic or inorganic electron donors is the semiconductor nanoparticles (SNs) that absorb light and transfer electrons (photoelectrons) behaving as artificial photosynthetic systems (biohybrid systems). Excited photoelectrons generated by illuminated SNs are highly reductive and readily accepted by membrane-bound proteins and electron shuttles to drive specific cell reduction processes and energy generation in microbes. However, the operational mechanisms of these hybrid systems are still poorly understood, especially at the material-microbe interface, and therefore the design and production of efficient biohybrids are challenging. Some major limitations/challenges and future prospects of SNs as microbial energization systems are discussed.

Biofilm response and removal via the coupling of visible-light-driven photocatalysis and biodegradation in an environment of sulfamethoxazole and Cr(VI)

The widespread contamination of water systems with antibiotics and heavy metals has gained much attention. Intimately coupled visible -light-responsive photocatalysis and biodegradation (ICPB) provides a novel approach for removing such mixed pollutants. In ICPB, the photocatalysis products are biodegraded by a protected biofilm, leading to the mineralization of refractory organics. In the present study, the ICPB approach exhibited excellent photocatalytic activity and biodegradation, providing up to ∼1.27 times the degradation rate of sulfamethoxazole (SMX) and 1.16 times the Cr(VI) reduction rate of visible-light-induced photocatalysis . Three-dimensional fluorescence analysis demonstrated the synergistic ICPB effects of photocatalysis and biodegradation for removing SMX and reducing Cr(VI). In addition, the toxicity of the SMX intermediates and Cr(VI) in the ICPB process significantly decreased. The use of MoS₂/CoS₂ photocatalyst accelerated the separation of electrons and holes, with•O₂^- and h⁺ attacking SMX and e^- reducing Cr(VI), providing an effective means for enhancing the removal and mineralization of these mixed pollutants via the ICPB technique. The microbial community results demonstrate that bacteria that are conducive to pollutant removal are were enriched by the acclimation and ICPB operation processes, thus significantly improving the performance of the ICPB system.

Inward-to-outward assembly of amine-functionalized carbon dots and polydopamine to Shewanella oneidensis MR-1 for high-efficiency, microbial-photoreduction of Cr(VI)

A novel photosensitized living biohybrid was fabricated by inward-to-outward assembly of amine-functionalized carbon dots (NCDs) and polydopamine (PDA) to Shewanella oneidensis MR-1 and applied for high-efficiency, microbial-photoreduction of Cr(VI). Within a 72 h test period, biohybrids achieved a pronounced catalytic reduction capacity (100%) for 100 mg/L Cr(VI) under visible illumination, greatly surpassing the poor capacity (only 2.5%) displayed by the wild strain under dark conditions. Modular configurations of NCDs and PDA afforded biohybrids with a large electron flux by harvesting extracellular photoelectrons generated from illuminated NCDs and increasing reducing equivalents released from an enlarged intracellular NADH/NAD⁺ pool. Further, increased production of intracellular c-type cytochromes and extracellular flavins resulting from the modular configuration enhanced the biohybrid electron transport ability. The enhancement of electron transport was also attributed to more conductive conduits at NCDs-PDA junction interfaces. Moreover, because NCDs are highly reductive, the enhanced Cr(VI) reduction was also attributed to direct reduction by the NCDs and the direct Cr(VI) reduction by sterile NCDs-assembled biohybrid was up to 20% in the dark. Overall, a highly efficient strategy for removal/transformation of Cr(VI) by using NCD-assembled photosensitized biohybrids was proposed in this work, which greatly exceeded the performance of Cr(VI)-remediation strategies based on conventional microbial technologies.

Microbe-mediated transformation of metal sulfides: Mechanisms and environmental significance

Microorganisms play a key role in the natural circulation of various constituent elements of metal sulfides. Some microorganisms (such as Thiobacillus ferrooxidans) can promote the oxidation of metal sulfides to increase the release of heavy metals. However, other microorganisms (such as Desulfovibrio vulgaris) can transform heavy metals into metal sulfides crystals. Therefore, insight into the metal sulfides transformation mediated by microorganisms is of great significance to environmental protection. In this review, first, we discuss the mechanism and influencing factors of microorganisms transforming heavy metals into metal sulfides crystals in different environments. Then, we explore three microbe-mediated transformation forms of heavy metals to metal sulfides and their environmental applications: (1) transformation to metal sulfides precipitation for metal resource recovery; (2) transformation to metal sulfides nanoparticles (NPs) for pollutant treatment; (3) transformation to "metal sulfides-microbe" biohybrid system for clean energy production and pollutant remediation. Finally, we further provide critical views on the application of microbe-mediated metal sulfides transformation in the environmental field and discuss the need for future research.

Modular configurations of living biomaterials incorporating nano-based artificial mediators and synthetic biology to improve bioelectrocatalytic performance: A review

Currently, the industrial application of bioelectrochemical systems (BESs) that are incubated with natural electrochemically active microbes (EABs) is limited due to inefficient extracellular electron transfer (EET) by natural EABs. Notably, recent studies have identified several novel living biomaterials comprising highly efficient electron transfer systems allowing unparalleled proficiency of energy conversion. Introduction of these biomaterials into BESs could fundamentally increase their utilization for a wide range of applications. This review provides a comprehensive assessment of recent advancements in the design of living biomaterials that can be exploited to enhance bioelectrocatalytic performance. Further, modular configurations of abiotic and biotic components promise a powerful enhancement through integration of nano-based artificial mediators and synthetic biology. Herein, recent advancements in BESs are synthesized and assessed, including heterojunctions between conductive nanomaterials and EABs, in-situ hybrid self-assembly of EABs and nano-sized semiconductors, cytoprotection in biohybrids, synthetic biological modifications of EABs and electroactive biofilms. Since living biomaterials comprise a broad range of disciplines, such as molecular biology, electrochemistry and material sciences, full integration of technological advances applied in an interdisciplinary framework will greatly enhance/advance the utility and novelty of BESs. Overall, emerging fundamental knowledge concerning living biomaterials provides a powerful opportunity to markedly boost EET efficiency and facilitate the industrial application of BESs to meet global sustainability challenges/goals.

Light-driven bio-decolorization of triphenylmethane dyes by a Clostridium thermocellum-CdS biohybrid

Widespread application of synthetic dyes could generate colored wastewaters causing a range of serious environmental problems. Due to the complex nature of effluents from textile industries, it is difficult to obtain satisfactory treatment of dyes-contaminated wastewater using one single method. Biohybrids coupling of photocatalysts and biocatalysts have great potential in environmental purification. However, how to select suitable organisms and enhance the hybrid's catalytic activities remain challenging. Here, a novel biohybrid system (Clostridium thermocellum-CdS), created for light-driven biodecolorization under thermophilic treatment by using non-photosynthetic microorganism C. thermocellum self-photosensitized with CdS nanoparticles was established. The biohybrids exhibited remarkable decolorization effects on triphenylmethane dyes. The highest decolorization rate was 0.206 min^-1. More importantly, enhanced catalytic activities of cadmium sulfide (CdS)-based biohybrids by controlling the particle sizes of semiconductors were demonstrated. Biohybrids systems (Clostridium thermocellum-CdS) through the self-precipitation of CdS with different particle sizes not only showed dramatic changes in the optical properties but also exhibited a very different decolorization rate. This work can not only further broaden targeted applications of CdS-based biohybrids but also demonstrate a promising route for improving biohybrids corresponding photocatalytic capabilities through in situ precipitation CdS with different particle sizes.

Ag-TiO2/biofilm/nitrate interface enhanced visible light-assisted biodegradation of tetracycline: The key role of nitrate as the electron accepter

Due to the pivotal role of Ag-TiO₂/biofilm/nitrate interface, enhanced visible light-assisted biodegradation of tetracycline (TC) in anoxic system was realized through both batch experiment and long-term operation in this study. The results of the batch experiment elucidated that 50 mg L^-1 TC could be completely removed within 10 h in Ag-TiO₂/biofilm/nitrate system. The continuous flow experiment was operated for 75 d to evaluate the performance and stability of Ag-TiO₂/biofilm/nitrate system. TC removal efficiency in Ag-TiO₂/biofilm/nitrate system was as high as 92.4 ± 1.6% at influent TC concentration of 50 mg L^-1 TC and hydraulic retention time (HRT) of 10 h, which would be attributed to the promoted separation of photoholes and photoelectrons at the presence of nitrate as electron acceptor. Facilitated electron transfer between semiconductor and biofilm was beneficial for enhancing TC biodegradation, thus lowering toxicity of intermediate products and promoting microbial activity. Moreover, the species related to TC biodegradation (Rhodopseudomonas, Phreatobacter and Stenotrophomonas), denitrification (Thauera) and electron transfer (Delftia) were enriched at Ag-TiO₂/biofilm/nitrate interface. Besides, a possible mechanism involved in enhanced TC degradation and nitrogen removal at Ag-TiO₂/biofilm/nitrate interface was proposed. This study provided a novel and promising strategy to enhance recalcitrant TC removal from industrial wastewater.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Effects of cadmium sulfide nanoparticles on sulfate bioreduction and oxidative stress in Desulfovibrio desulfuricans

Sulfate-containing wastewater has a serious threat to the environment and human health. Microbial technology has great potential for the treatment of sulfate-containing wastewater. It was found that nano-photocatalysts could be used as extracellular electron donors to promote the growth and metabolic activity of non-photosynthetic microorganisms. However, nano-photocatalysts could also induce oxidative stress and damage cells. Therefore, the interaction mechanism between photosynthetic nanocatalysts and non-photosynthetic microorganisms is crucial to determine the regulatory strategies for microbial wastewater treatment technologies. In this paper, the mechanism and regulation strategy of cadmium sulfide nanoparticles (CdS NPs) on the growth of sulfate-reducing bacteria and the sulfate reduction process were investigated. The results showed that the sulfate reduction efficiency could be increased by 6.4% through CdS NPs under light conditions. However, the growth of Desulfovibrio desulfuricans C09 was seriously inhibited by 55% due to the oxidative stress induced by CdS NPs on cells. The biomass and sulfate reduction efficiency could be enhanced by 6.8% and 5.9%, respectively, through external addition of humic acid (HA). At the same time, the mechanism of the CdS NPs strengthening the sulfate reduction process by sulfate bacteria was also studied which can provide important theoretical guidance and technical support for the development of microbial technology combined with extracellular electron transfer (EET) for the treatment of sulfate-containing wastewater.

Enhanced bio-photodegradation of p-chlorophenol by CdS/g-C3N4 3D semiconductor-microbe interfaces

p-chlorophenol (p-CP), one of the highly toxic chlorinated organic compounds, is recalcitrant in conventional biodegradation process. This study reported a synergistic degradation protocol of 3D semiconductor-microbe interfaces, in which graphite felts (GF) and CdS/g-C₃N₄ nanocomposites were chosen as the carrier and semiconductor for enhanced p-CP degradation. Based on microstructure, photoelectrochemical and degradation performance analysis, the optimal CdS content in CdS/g-C₃N₄ nanocomposites was 10 wt%. The efficiencies of p-CP and TOC removal in bio-photodegradation system were as high as 95% and 77% without extra electron acceptors/donors, which were far better than those in traditional photodegradation and biodegradation system. High-throughput sequencing analysis suggested that p-CP degradation related species (Chryseobacterium, Stenotrophomonas and Rhodopseudomonas), electroactive species (Chryseobacterium, Stenotrophomonas, Hydrogenophaga and Cupriavidus) and hydrogen-utilizing species (Hydrogenophaga and Cupriavidus) were enriched at 3D semiconductor-microbe interfaces. The enrichment of functional species played a crucial role for p-CP removal and mineralization at 3D semiconductor-microbe interfaces. Moreover, the mechanism of enhanced p-CP bio-photodegradation at 3D semiconductor-microbe interfaces was investigated by utilizing Phylogenetic Investigation of Communities by Reconstruction of Unobserved States 2 (PICRUSt2). The results showed that the genes involved in p-CP biodegradation, hydrogen metabolism and extracellular electron transfer were remarkably enriched. Possible mechanism for enhancement of p-CP degradation in bio-photodegradation system was proposed, in which photocatalytic H₂ and photoelectron transfer played an important role for enhancing p-CP mineralization by microbes. 3D semiconductor-microbe interfaces could maintain excellent performance for p-CP degradation after long-term operation, which provide a potential alternative for the enhanced treatment of wastewater containing p-CP.

Facile synthesis of a luminescent carbon material from yogurt for the efficient photocatalytic degradation of methylene blue

The present study is focused on yogurt as a simple, inexpensive, abundant, and green source for the preparation of luminescent carbon material for enhancing the photodegradation of methylene blue (MB). It introduces an ecological and sustainable approach for the large-scale production of carbon material using the direct thermal annealing of yogurt in a muffle furnace. The size of the as-prepared carbon material is about 200–300 nm, with average particle size distribution of 355 nm. The material exhibits clear luminescence under illumination with ultraviolet light. The synthesized carbon material shows an outstanding degradation functionality of MB under the irradiation of ultraviolet (UV) light in aqueous media. Various dye degradation parameters such as initial dye concentration, catalyst dose, pH of dye solution, and scavenger effects have been investigated. The optimum MB concentration was found to be 2.3 × 10⁻⁵ M with a degradation efficiency of 94.8%. The degradation was highly enhanced at pH 11 with a degradation efficiency of 98.11%. The degradation of MB under highly alkaline conditions was mainly governed by the high amount of hydroxyl radicals. Furthermore, the scavenger study confirmed that the hydroxyl radicals were mainly involved in the degradation process. The degradation kinetics of MB followed first order kinetics with large values of rate constant. The reusability was also studied to ensure the stability of the as-prepared carbon material during the degradation of MB. The preparation of carbon materials with efficient photosensitivity for the degradation of organic dyes from yogurt shows a green and innovative methodology. Therefore, it can be of great interest for future studies related to energy and environmental applications.

Left hand side: structural and optical aspects of the as-prepared carbon material from yogurt. Right hand side: the absorbance spectra of methylene blue degradation using the as-prepared carbon material from yogurt.

Abiotic-biotic hybrid for CO2 biomethanation: From electrochemical to photochemical process

Converting CO₂ into sustainable fuels (e.g., CH₄) has great significance to solve carbon emission and energy crisis. Generally, CO₂ methanation needs abundant of energy input to overcome the eight-electron-transfer barrier. Abiotic-biotic hybrid system represents one of the cutting-edge technologies that use renewable electric/solar energy to realize eight-electron-transfer CO₂ biomethanation. However, the incompatible abiotic-biotic hybrid can result in low efficiency of electron transfer and CO₂ biomethanation. Herein, we present the comprehensive review to highlight how to design abiotic-biotic hybrid for electric/solar-driven CO₂ biomethanation. We primarily introduce the CO₂ biomethanation mechanism, and further summarize state-of-the-art electrochemical and photochemical CO₂ biomethanation in hybrid systems. We also propose excellent synthetic biology strategies, which are useful to design tunable methanogenic microorganisms or enzymes when cooperating with electrode/semiconductor in hybrid systems. This review provides theoretical guidance of abiotic-biotic hybrid and also shows the bright future of sustainable fuel production in the form of CO₂ biomethanation.

Acetogenic bacteria utilize light-driven electrons as an energy source for autotrophic growth

To develop an efficient artificial photosynthesis system using acetogen-nanoparticle hybrids, the efficiency of the electron–hole pair generation of nanoparticles must be enhanced to demonstrate extracellular electron utilization by the acetogen. Here we verified that Clostridium autoethanogenum, an industrially relevant acetogen, could use electrons generated from size- and structure-controlled chemically synthesized cadmium sulfide nanoparticles displayed on the cell surface under light-exposure conditions. In addition, transcriptomic analysis showed that the electrons generated from nanoparticles were largely transported to the intracellular matrix via the metal ion or flavin-binding proteins. These results illustrate the potential to increase the CO₂-fixing efficiency of nanoparticle-based artificial photosynthesis by engineering cellular processes related to electron transfer generated from the cathode.

Acetogenic bacteria use cellular redox energy to convert CO₂ to acetate using the Wood–Ljungdahl (WL) pathway. Such redox energy can be derived from electrons generated from H₂ as well as from inorganic materials, such as photoresponsive semiconductors. We have developed a nanoparticle-microbe hybrid system in which chemically synthesized cadmium sulfide nanoparticles (CdS-NPs) are displayed on the cell surface of the industrial acetogen Clostridium autoethanogenum. The hybrid system converts CO₂ into acetate without the need for additional energy sources, such as H₂, and uses only light-induced electrons from CdS-NPs. To elucidate the underlying mechanism by which C. autoethanogenum uses electrons generated from external energy sources to reduce CO₂, we performed transcriptional analysis. Our results indicate that genes encoding the metal ion or flavin-binding proteins were highly up-regulated under CdS-driven autotrophic conditions along with the activation of genes associated with the WL pathway and energy conservation system. Furthermore, the addition of these cofactors increased the CO₂ fixation rate under light-exposure conditions. Our results demonstrate the potential to improve the efficiency of artificial photosynthesis systems based on acetogenic bacteria integrated with photoresponsive nanoparticles.

Enhanced Light-Driven Hydrogen Production by Self-Photosensitized Biohybrid Systems

Storage of solar energy as hydrogen provides a platform towards decarbonizing our economy. One emerging strategy for the production of solar fuels is to use photocatalytic biohybrid systems that combine the high catalytic activity of non-photosynthetic microorganisms with the high light-harvesting efficiency of metal semiconductor nanoparticles. However, few such systems have been tested for H₂ production. We investigated light-driven H₂ production by three novel organisms, Desulfovibrio desulfuricans, Citrobacter freundii, and Shewanella oneidensis, self-photosensitized with cadmium sulfide nanoparticles, and compared their performance to Escherichia coli. All biohybrid systems produced H₂ from light, with D. desulfuricans-CdS demonstrating the best activity overall and outperforming the other microbial systems even in the absence of a mediator. With this system, H₂ was continuously produced for more than 10 days with a specific rate of 36 μmol g_dcw ^-1  h^-1 . High apparent quantum yields of 23 % and 4 % were obtained, with and without methyl viologen, respectively, exceeding values previously reported.

Comparative Study of the Photocatalytic Hydrogen Evolution over Cd1-xMnxS and CdS-β-Mn3O4-MnOOH Photocatalysts under Visible Light

A series of solid solutions of cadmium and manganese sulfides, Cd_1−xMn_xS (x = 0–0.35), and composite photocatalysts, CdS-β-Mn₃O₄-MnOOH, were synthesized by precipitation with sodium sulfide from soluble cadmium and manganese salts with further hydrothermal treatment at 120 °C. The obtained photocatalysts were studied by the X-ray diffraction method (XRD), UV-vis diffuse reflectance spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and N₂ low temperature adsorption. The photocatalysts were tested in hydrogen production using a Na₂S/Na₂SO₃ aqueous solution under visible light (λ = 450 nm). It was shown for the first time that both kinds of photocatalysts possess high activity in hydrogen evolution under visible light. The solid solution Cd_0.65Mn_0.35S has an enhanced photocatalytic activity due to its valence and conduction band position tuning, whereas the CdS-β-Mn₃O₄-MnOOH (40–60 at% Mn) samples were active due to ternary heterojunction formation. Further, the composite CdS-β-Mn₃O₄-MnOOH photocatalyst had much higher stability in comparison to the Cd_0.65Mn_0.35S solid solution. The highest activity was 600 mmol g⁻¹ h⁻¹, and apparent quantum efficiency of 2.9% (λ = 450 nm) was possessed by the sample of CdS-β-Mn₃O₄-MnOOH (40 at% Mn).

BiVO4/FeOOH semiconductor-microbe interface for enhanced visible-light-driven biodegradation of pyridine

Pyridine, a highly toxic nitrogen-containing heterocyclic compound, is recalcitrant in the conventional biodegradation process. In this study, BiVO₄/FeOOH semiconductor-microbe interface was developed for enhanced visible-light-driven biodegradation of pyridine, where the efficiencies of pyridine removal (100%), total organic carbon (TOC) removal (88.06±3.76%) and NH₄⁺-N formation (84.51±8.95%) were remarkably improved, compared to the biodegradation system and photodegradation system. The electron transport system activity and photoelectrochemical analysis implied the significant improvement of photogenerated carriers transfer between microbes and semiconductors. High-throughput sequencing analysis suggested functional species related to pyridine biodegradation (Shewanella, Bacillus and Lysinibacillus) and electron transfer (Shewanella and Tissierella) were enriched at the semiconductor-microbe interface. The light-excited holes played a crucial role in promoting pyridine mineralization. This study demonstrated that this bio-photodegradation system would be a potential alternative for the efficient treatment of wastewater containing recalcitrant pollutant such as pyridine.