Why can hydrothermally pretreating lignocellulose in low severities improve anaerobic digestion performances?

Comparison of acid and hydrothermal pretreatments of date waste for value creation

The production of date syrup yields a substantial amount of date press cake (DPC), fibrous and moisturising material with great potential for generating value through bioprocessing. However, the recalcitrant structure of DPC affects the yield of products in bioprocesses. To boost the accessibility of the structure as well as increase the soluble fraction of carbohydrates and facilitate further enzymatic hydrolysis, hydrothermal and dilute acid (0.5% (v/v) sulfuric acid) pretreatments as cost-effective and feasible methods were applied on DPC at relatively low temperatures (80, 100, 120 and 140 °C) and reaction times (60 and 90 min). The success in pretreatment was then evaluated by a post-enzymatic treatment using an enzyme cocktail of cellulases and hemicelluloses. Based on total accessible sugar with minimum produced inhibitors, an optimal operating condition was considered acid pretreatment at 120 °C for 90 min with a 55.02% increase in total sugar yield. To explore the potential use of pretreated DPC, an anaerobic digestion was conducted on untreated and acid-pretreated DPC at 120 °C for 90 min. The results showed that pretreatment increased the total bioproduct yield, including hydrogen, ethanol, and volatile fatty acid yields, by 59.75%. This demonstrates the significant impact of pretreatment on product yields in a bioprocess.

Anaerobic digestion of process water from hydrothermal treatment processes: a review of inhibitors and detoxification approaches

Integrating hydrothermal treatment processes and anaerobic digestion (AD) is promising for maximizing resource recovery from biomass and organic waste. The process water generated during hydrothermal treatment contains high concentrations of organic matter, which can be converted into biogas using AD. However, process water also contains various compounds that inhibit the AD process. Fingerprinting these inhibitors and identifying suitable mitigation strategies and detoxification methods is necessary to optimize the integration of these two technologies. By examining the existing literature, we were able to: (1) compare the methane yields and organics removal efficiency during AD of various hydrothermal treatment process water; (2) catalog the main AD inhibitors found in hydrothermal treatment process water; (3) identify recalcitrant components limiting AD performance; and (4) evaluate approaches to detoxify specific inhibitors and degrade recalcitrant components. Common inhibitors in process water are organic acids (at high concentrations), total ammonia nitrogen (TAN), oxygenated organics, and N-heterocyclic compounds. Feedstock composition is the primary determinant of organic acid and TAN formation (carbohydrates-rich and protein-rich feedstocks, respectively). In contrast, processing conditions (e.g., temperature, pressure, reaction duration) influence the formation extent of oxygenated organics and N-heterocyclic compounds. Struvite precipitation and zeolite adsorption are the most widely used approaches to eliminate TAN inhibition. In contrast, powdered and granular activated carbon and ozonation are the preferred methods to remove toxic substances before AD treatment. Currently, ozonation is the most effective approach to reduce the toxicity and recalcitrance of N and O-heterocyclic compounds during AD. Microaeration methods, which disrupt the AD microbiome less than ozone, might be more practical for nitrifying TAN and degrading recalcitrant compounds, but further research in this area is necessary.

Substance bioconversion, hydrolases activity, and metagenomic analysis to unravel the enhanced biomethanation of corn stover with urea-hydrothermal pretreatment

Corn stover (CS) is a promising feedstock for producing biomethane, that can replace diminishing fossil fuels. However, the recalcitrant structure of CS resulted in low degradability in anaerobic digestion (AD). Numerous studies investigated the pretreatment of CS before AD, but the insight mechanism of biomethanation enhancement is not fully revealed. Therefore, this study advanced low-temperature urea-hydrothermal pretreatment of CS, and the biomethane production, substance bioconversion, hydrolase activity, and metagenomic analysis were conducted to unravel the intrinsic mechanisms of pretreatment for the enhanced biomethanation. The results showed that the pretreatment improved 11.5% of the specific surface area of CS, providing 111.5% higher total volatile fatty acids and 19.9% higher reducing sugars than the control, potentially enriching more anaerobic microorganisms. As a result, the pretreated CS achieved 19.1% higher biomethane yield, 9.1% higher volatile solid removal rate, and 3 days shorter digestion time. The mass balance and microbial community succession analysis indicated that the pretreatment reinforced the biomethane conversion from carbohydrate, which was attributed to the rapid enrichment of hydrolytic acidification bacteria (g__unclassified_o__Bacteroidales) (33.2%) and mixotrophic archaea (Methanosarcina) (72.3%). Meanwhile, the activity of cellulase and xylanase was enhanced up to 23.7% and 66.7%. Metagenomic analysis revealed that the combined pretreatment of CS promoted methanogenesis by enhancing various CAZymes secretion (such as oligosaccharide-degrading enzymes), and functional genes expression of hydrolytic, acidification and acetate-methane pathways at days 1-5. The study indicated that the combined pretreatment could influence microbial composition and function by changing the physicochemical properties of the CS, thereby improving methanogenic performance.

Subcritical Water Pretreatment for Anaerobic Digestion Enhancement: A Review

This work reviews hydrothermal subcritical water pretreatment to enhance biogas production through anaerobic digestion. The complexity of the lignocellulosic structure has been the main limitation contributing to unsatisfactory biogas production throughout the anaerobic digestion. The high resistance of the structure to biological hydrolysis has increased the interest in applying pretreatment prior to anaerobic digestion to facilitate hydrolysis. Hydrothermal subcritical water technology, an environmentally friendly pretreatment that uses water as the main medium, is gaining prominence in biogas enhancement. However, the subcritical water pretreatment influence on structural properties, biogas production, and the production of anaerobic process inhibitors signifies a knowledge gap and needs an evaluation. This review presents the need for pretreatment reaction and properties in the subcritical water region, biogas production from subcritical water pre-treated waste, production of inhibitors, and its challenges are discussed. This pretreatment could be a promising option and further enhance biogas production throughout the anaerobic digestion process.

Enhanced electrochemical performance of porous carbon from wheat straw as remolded by hydrothermal processing

To improve the electrochemical properties of lignocellulose-derived carbon, wheat straw was hydrothermally processed at different temperatures followed by KOH activation for the preparation of porous carbons. Their physical, chemical, and electrochemical properties were analyzed to clarify the effects of hydrothermal processing. The results indicated that high-temperature hydrothermal processing fragmented the wheat straw and increased the heteroatoms content to make the hydrochars more conducive to activation, thereby improving the specific surface area, N-heteroatoms and phenolic hydroxyl groups of activated carbons. A maximum specific surface area of 2034.4 m² g^-1 was achieved by HAC-300 (the activated carbon derived from hydrothermally processed wheat straw at 300 °C) with more N-heteroatoms and phenolic hydroxyl groups. Correspondingly, the excellent electrochemical performance of the three-electrode supercapacitor device assembled by HAC-300 showed a specific capacitance of 286.95 F g^-1 at 0.5 A g^-1, representing an improvement of 89.5 % over than that of the original wheat straw without hydrothermally processing. Its symmetric supercapacitor also realized a good capacitance retention of 95.8 % after 10,000 cycles at 5 A g^-1, suggesting the excellent cycling stability of the porous carbon from the hydrothermally processed wheat straw.

Impact of a Pretreatment Step on the Acidogenic Fermentation of Spent Coffee Grounds

Acidogenic fermentation (AF) is often applied to wastes to produce short-chain organic acids (SCOAs)-molecules with applications in many industries. Spent coffee grounds (SCGs) are a residue from the coffee industry that is rich in carbohydrates, having the potential to be valorized by this process. However, given the recalcitrant nature of this waste, the addition of a pretreatment step can significantly improve AF. In this work, several pretreatment strategies were applied to SCGs (acidic hydrolysis, basic hydrolysis, hydrothermal, microwave, ultrasounds, and supercritical CO2 extraction), evaluated in terms of sugar and inhibitors release, and used in AF. Despite the low yields of sugar extracted, almost all pretreatments increased SCOAs production. Milder extraction conditions also resulted in lower concentrations of inhibitory compounds and, consequently, in a higher concentration of SCOAs. The best results were obtained with acidic hydrolysis of 5%, leading to a production of 1.33 gSCOAs/L, an increase of 185% compared with untreated SCGs.

Current development and perspectives of anaerobic bioconversion of crop stalks to Biogas: A review

As one of the most abundant biomass resources, crop stalks are great potential feedstock available for anaerobic digestion (AD) to produce biogas. However, the specific physical properties and complex chemical structures of crop stalks form strong barriers to efficient AD bioconversion. To overcome these problems, many efforts have been made over the past few years. This paper reviewed recent research in the evolving field of anaerobic bioconversion of crop stalks and was focused on three critical aspects affecting AD performance: various pretreatment methods and their effects on the improvement of crop stalk biodegradability, determination of specific AD operation parameters for crop stalks, and development of AD technologies. Finally, recommendations on the future development of crop stalk AD were proposed.

New insight into the impact of moisture content and pH on dissolved organic matter and microbial dynamics during cattle manure composting

Composting is an effective way to treat agricultural waste, whereas inappropriate initial conditions could cause lower maturity and system instability. In this study, the dissolved organic matter dynamics and microbial community succession of cattle-manure composting were investigated under different initial moisture content (MC) and pH of raw material. The results indicated that the extended duration of thermophilic phase and the highest GI (germination index) value of final product were observed at matrix 60% MC and pH 8.5 (AT2 treatment). Microbial analysis showed that the succession of bacterial and fungal community was significantly influenced by total carbon (TN), pH and MC (P < 0.05). The relationship between microbial community and fluorescence regional integration (FRI) parameters demonstrated that Thermobifida (bacterial genus), Mycothermus and Thermomyces (fungal genera) were positively correlated with P_{V, n} (the integral aera of Region V). This study could provide a potential strategy for large-scale industrial application of compost.

Review and perspectives of enhanced volatile fatty acids production from acidogenic fermentation of lignocellulosic biomass wastes

Lignocellulosic biomass wastes are abundant resources that are usually valorized for methane-rich biogas via anaerobic digestion. Conversion of lignocellulose into volatile fatty acids (VFA) rather than biogas is attracting attention due to the higher value-added products that come with VFA utilization. This review consolidated the latest studies associated with characteristics of lignocellulosic biomass, the effects of process parameters during acidogenic fermentation, and the intensification strategies to accumulate more VFA. The differences between anaerobic digestion technology and acidogenic fermentation technology were discussed. Performance-enhancing strategies surveyed included (1) alkaline fermentation; (2) co-digestion and high solid-state fermentation; (3) pretreatments; (4) use of high loading rate and short retention time; (5) integration with electrochemical technology, and (6) adoption of membrane bioreactors. The recommended operations include: mesophilic temperature (thermophilic for high loading rate fermentation), C/N ratio (20-40), OLR (< 12 g volatile solids (VS)/(L·d)), and the maximum HRT (8-12 days), alkaline fermentation, membrane technology or electrodialysis recovery. Lastly, perspectives were put into place based on critical analysis on status of acidogenic fermentation of lignocellulosic biomass wastes for VFA production.

Biomethane Yield, Physicochemical Structures, and Microbial Community Characteristics of Corn Stover Pretreated by Urea Combined with Mild Temperature Hydrotherm

The corn stover (CS)’s compact structure makes it challenging for microorganisms to use in anaerobic digestion (AD). Therefore, improving CS biodegradability has become a key focus in AD studies. Methods are being targeted at the pretreatment of CS, combining advanced urea with mild temperature hydrotherm pretreatment to study its effect on promoting the AD process of CS. The biomethane yield, physicochemical structure, and microbial community characteristics were investigated. CS samples were assigned into groups differed by a range of pretreatment times (from 24 to 96 h) and set at a temperature of 50 °C with a 2% urea addition. Results revealed that the 72-h group obtained the highest biomethane yield of 205 mL/g VS⁻¹, volatile solid (VS) and total solid (TS) removal rates of 69.3% and 47.7%, which were 36.7%, 25.3% and 27.5% higher than those of untreated one, respectively. After conducting several analyses, results confirmed the pretreatment as a method for altering CS microstructures benefits biomethane production. The most resounding differences between pretreated and untreated groups were observed within a microbial community, an integral factor for improved AD performance. This study serves to confirm that this specific pretreatment is an effective method for enhancing biomethane production in CS.