1
|
Ouyang J, Zhang M, Xiong W, Zhou L, Zhao L, Li Z, Zhou C, Chen H, Luo Y, Fang S, Baughman RH. High performance supercapacitors deploying cube-templated tracheid cavities of wood-derived carbon. J Colloid Interface Sci 2024; 671:145-153. [PMID: 38795535 DOI: 10.1016/j.jcis.2024.05.172] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Revised: 05/21/2024] [Accepted: 05/22/2024] [Indexed: 05/28/2024]
Abstract
Wood-derived carbon, with its strong tracheid array structure, is an ideal material for use as a self-supporting electrode in supercapacitors. By leveraging the inherent through pore structure and surface affinity found in wood tracheids, we successfully engineered a highly spatially efficient cube-templated porous carbon framework inside carbonized wood tracheid cavities through precise control over precursor crystallization temperatures. This innovative cubic channel architecture effectively maximizes up to (79 ± 1)% of the cavity volume in wood-derived carbon while demonstrating exceptional hydrophilicity and high conductivity properties, facilitating the development of supercapacitors with enhanced areal/volumetric capacitances (2.65F cm-2/53.0F cm-3 at 5.0 mA cm-2) as well as superior areal/volumetric energy densities (0.37 mWh cm-2/7.36 mWh cm-3 at 2.5 mW cm-2). The fabrication of these cube-templated channels with high cube filling content is not only simple and precisely controllable, but also environmentally friendly. The proposed method eliminates the conventional acid-base treatment process for pore formation, facilitating the rapid development and practical implementation of thick electrodes with superior performance in supercapacitors. Moreover, it offers a universal research approach for the commercialization of wood-derived thick electrodes.
Collapse
Affiliation(s)
- Jie Ouyang
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Mengmeng Zhang
- The Alan G. MacDiarmid NanoTech Institute, The University of Texas at Dallas, Richardson, TX 75080, USA
| | - Wanning Xiong
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Liangliang Zhou
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Linlin Zhao
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Zejun Li
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Cui Zhou
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Hong Chen
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Yongfeng Luo
- Hunan Province Key Laboratory of Materials Surface & Interface Science and Technology, College of Science, Material Science and Engineering School, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China.
| | - Shaoli Fang
- The Alan G. MacDiarmid NanoTech Institute, The University of Texas at Dallas, Richardson, TX 75080, USA.
| | - Ray H Baughman
- The Alan G. MacDiarmid NanoTech Institute, The University of Texas at Dallas, Richardson, TX 75080, USA.
| |
Collapse
|
2
|
Technologies for removing pharmaceuticals and personal care products (PPCPs) from aqueous solutions: Recent advances, performances, challenges and recommendations for improvements. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.121144] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
|
3
|
Wood Preservation Practices and Future Outlook: Perspectives of Experts from Finland. FORESTS 2022. [DOI: 10.3390/f13071044] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
This paper examined wood preservation practices and outlook considering climate change from the perspective of Finnish experts through interviews. Key findings highlighted that: (1) pressure impregnated wood will continually evolve and secure its market, and it seems worthy of developing modified wood products, especially with the increasing attention to recyclability and lifecycle concepts; (2) demand for highly processed surface treatment products is high; (3) opportunities for more sustainable and environmentally friendly wood preservation methods, and thus production volume will increase in the future; (4) increasing mold problems in Finland due to climate change make surface treatment more important than ever; (5) demands for fire protection treatments are increasing, but fire testing fees and processes have slowed product development; (6) although the possibility of the spread of termites triggered by global warming to Finland seems to be a future scenario, this issue needs to be considered in products exported to hot countries; and (7) preservatives have become more critical to protect untreated wood from the adverse effects of climate change. It is believed that this study will help accelerate the transition of innovative and environmentally friendly wood treatments on the Finnish market, thereby promoting the use of wood in the building construction industry.
Collapse
|
4
|
Abstract
Vegetable tannin is widely applied in various industries, in agriculture, and in water treatment as a natural polyphenolic compound; however, little data has been collected concerning the relationship between structure and eco-toxicity. Here, the toxicity of six commercial tannin and three model chemicals was assessed using Photobacterium phosphoreum. Two kinds of hydrolyzed tannin displayed higher bioluminescence inhibition than four kinds of condensed tannin, and the model chemical of hydrolyzed tannin also showed greater toxicity than those of condensed tannin, indicating the structure dependent eco-toxicity of vegetable tannin. The reactive toxicity mechanism was proposed, which was illustrated by molecular simulations based on the model chemicals and luciferase.
Collapse
|
5
|
Quebracho-Based Wood Preservatives: Effect of Concentration and Hardener on Timber Properties. COATINGS 2022. [DOI: 10.3390/coatings12050568] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/10/2022]
Abstract
Tannin polyphenols are produced by plants to protect themselves against natural decay. It is expected that impregnating low-durable timber with tannin extracts of more durable species such as quebracho (Schinopsis balansae) will enhance the durability of the specimens. This biomimetic approach combined with the in situ polymerization of quebracho–hexamine formulations can be a valid alternative to synthetic wood preservatives. In this work, we aim to evaluate the impregnation mechanism as well as the impact of tannin and hardener concentration on the mechanical and leaching resistance properties of treated wood. Compression resistance, surface hardness and leaching resistance of four different common non-durable wood species: spruce (Picea abies), pine (Pinus spp.), poplar (Populus alba) and beech (Fagus sylvatica) impregnated with different concentrations of extract and hexamine are presented. The results show that the mechanical properties of tannin-impregnated timber are enhanced, especially for timber with lower densities. Tannin and hardener concentrations tendentially do not contribute significantly to further increase MOE (modulus of elasticity), MOR (modulus of rupture) and Brinell hardness. Similar results are also obtained when the specimens are tested against leaching: tannin is significantly more water-resistant when cured with hexamine, but higher amounts of hardener do not further improve its water resistance. These findings suggest that quebracho tannin–hexamine formulations are already effective at low concentrations (5 to 10% extract with 2.5 to 5% hexamine).
Collapse
|
6
|
Pánek M, Borůvka V, Nábělková J, Šimůnková K, Zeidler A, Novák D, Černý R, Kobetičová K. Efficacy of Caffeine Treatment for Wood Protection-Influence of Wood and Fungi Species. Polymers (Basel) 2021; 13:3758. [PMID: 34771315 PMCID: PMC8588167 DOI: 10.3390/polym13213758] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2021] [Revised: 10/26/2021] [Accepted: 10/26/2021] [Indexed: 01/14/2023] Open
Abstract
In the future, we can expect increased requirements to the health and ecological integrity of biocides used for the protection of wood against bio-attacks, and it is therefore necessary to search for and thoroughly test new active substances. Caffeine has been shown to have biocidal efficacy against wood-destroying fungi, moulds and insects. The aim of the research was to determine whether the effectiveness of caffeine, as a fungicide of natural origin, is affected by a different type of treated wood. Norway spruce mature wood (Picea abies), Scots pine sapwood (Pinus sylvestris), and European beech wood (Fagus sylvatica) were tested in this work. The samples were treated using long-term dipping technology or coating (according to EN 152:2012) and then tested against selected wood-destroying brown rot fungi according to the standard EN 839:2015, wood-staining fungi according to EN 152:2012, and against mould growth according to EN 15457:2015. The penetration of caffeine solution into wood depth was also evaluated using liquid extraction chromatography, as well as the effect of the treatment used on selected physical and mechanical properties of wood. The test results showed that the type of wood used and the specific type of wood-degrading agent had a significant effect on the effectiveness of caffeine protection. The most resistant wood was the treated spruce, whereas the most susceptible to deterioration was the treated white pine and beech wood. The results of the work showed that caffeine treatment is effective against wood-destroying fungi at a concentration of 2%, and at 1% in some of the tested cases. It can be used as an ecologically acceptable short-term protection alternative against wood-staining fungi in lumber warehouses and is also partially effective against moulds. It also does not have negative effects on changes in the physical and mechanical properties of the tested wood species.
Collapse
Affiliation(s)
- Miloš Pánek
- Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences, Kamýcká 129, 165 00 Prague, Czech Republic; (V.B.); (K.Š.); (A.Z.); (D.N.)
| | - Vlastimil Borůvka
- Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences, Kamýcká 129, 165 00 Prague, Czech Republic; (V.B.); (K.Š.); (A.Z.); (D.N.)
| | - Jana Nábělková
- Department of Sanitary and Ecological Engineering, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 160 00 Prague, Czech Republic;
| | - Kristýna Šimůnková
- Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences, Kamýcká 129, 165 00 Prague, Czech Republic; (V.B.); (K.Š.); (A.Z.); (D.N.)
| | - Aleš Zeidler
- Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences, Kamýcká 129, 165 00 Prague, Czech Republic; (V.B.); (K.Š.); (A.Z.); (D.N.)
| | - David Novák
- Department of Wood Processing and Biomaterials, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences, Kamýcká 129, 165 00 Prague, Czech Republic; (V.B.); (K.Š.); (A.Z.); (D.N.)
| | - Robert Černý
- Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 160 00 Prague, Czech Republic; (R.Č.); (K.K.)
| | - Klára Kobetičová
- Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 160 00 Prague, Czech Republic; (R.Č.); (K.K.)
| |
Collapse
|