Simultaneously removal of Cr(VI) and Cd(II) from water using a flower-like primary battery nanosystem

Simultaneous removal of tetracycline hydrochloride and hexavalent chromium by heterogeneous Fenton in a photocatalytic fuel cell system

In this work, a novel double-chamber system (PFC-Fenton), combined photocatalytic fuel cell (PFC) with Fenton, was constructed for tetracycline hydrochloride (TCH) and hexavalent chromium (Cr(VI)) removal and electricity production. Therein, Zn5(OH)6(CO3)2/Fe2O3/BiVO4/fluorine-doped SnO2 (ZIO/BiVO4/FTO) and carboxylated carbon nanotubes/polypyrrole/graphite felt (CCNTs/Ppy/GF) were served as photoanode and cathode, respectively. Under light irradiation, the removal efficiencies of TCH and Cr(VI) with the addition of H2O2 (2 mL) could reach 93.1% and 80.4%, respectively. Moreover, the first-order kinetic constants (7.37 × 10-3 min-1 of TCH and 3.94 × 10-3 min-1 of Cr(VI)) were 5.26 and 5.57 times as much as the absence of H2O2. Simultaneously, the maximum power density could be obtained 0.022 mW/cm2 at a current density of 0.353 mA/cm2. Therein, the main contribution of TCH degradation was ·OH and holes in anode chamber. The synergistic effect of photoelectrons, generated ·O2-, and H2O2 played a crucial role in the reduction of Cr(VI) in cathode chamber. The high-performance liquid chromatography-mass spectrometry indicated that TCH could be partially mineralized into CO2 and H2O. X-ray photoelectron spectroscope and X-ray absorption near-edge structure spectra showed that Cr(VI) could be reduced to Cr(III). After 5 times of cycling, the removal efficiencies of TCH and Cr(VI) were still greater than 70%, indicating the remarkable stability of the PFC-Fenton system. Overall, this system could remove TCH/Cr(VI) and generate power simultaneously without iron sludge formation, demonstrating a promising method to further develop PFC-Fenton technology.

A green synthesized medicine residue carbon-based iron composite for the removal of chromium (VI) and cadmium (II): Performance, kinetics and mechanism

Nowadays, clean-up of heavy metals from wastewaters using waste residue carbon-based material has received increasing attention. In this work, a novel Chinese medicine residue carbon-based nano zero-valent iron composite (CM-nZVI) had been successfully prepared using the combined Chinese medicine residue, FeCl3 and green tea extract. Cr(VI) and/ or Cd(II) removal in water by the CM-nZVI were systematacially investigated with a series of batch experiments. The most relevant findings indicated the adsorption efficiecy and capacity of Cr(VI) by CM-nZVI were respecitvely nearly 98% and 26 mg/g under optimized reaction conditions. The negative influences of the cations on the Cr(VI) removal followed the order of Al3+ > Ca2+ > Mg2+ Na+ > K+, but the anions followed the order of HCO3- > PO43- > NO3- > Cl- > SO42-. Humic acid (HA) and ionic strength with high concentrations severely inhibited Cr(VI) removal. The Cr(VI) adsorption on CM-nZVI fitted well by the pseudo-second-order kinetic and Langmuir models. A monolayer endothermic chemisorption occurred on Cr(VI) adsorption over CM-nZVI, and Cr(VI) removal by CM-nZVI primarily involved in the absorption, reduction, precipitation and complexation processes. Both Cr(VI) and Cd(II) removals had been achieved by CM-nZVI at their low concentrations. This CM-nZVI showed a better reusability proprity for Cr(VI) and Cd(II) removal with the regeneration of CM-nZVI through simple pickling. The outcomes of this work show that CM-nZVI could be used an effective material for heavy metals removal from water.

Co-Removal Effect and Mechanism of Cr(VI) and Cd(II) by Biochar-Supported Sulfide-Modified Nanoscale Zero-Valent Iron in a Binary System

This study aimed to explore the co-removal effect and mechanism of Cr(VI) and Cd(II) with an optimized synthetic material. The toxicity and accumulation characteristics of Cr(VI) and Cd(II) encountered in wastewater treatment areas present significant challenges. In this work, a rational assembly of sulfide-modified nanoscale zero-valent iron (SnZVI) was introduced into a biochar (BC), and a Cr(VI)–Cd(II) binary system adsorbent with high efficiency was synthesized. When the preparation temperature of the BC was 600 °C, the molar ratio of S/Fe was 0.3, the mass ratio of BC/SnZVI was 1, and the best adsorption capacities of BC-SnZVI for Cr(VI) and Cd(II) in the binary system were 58.87 mg/g and 32.55 mg/g, respectively. In addition, the adsorption mechanism of BC-SnZVI on the Cr(VI)-Cd(II) binary system was revealed in depth by co-removal experiments, indicating that the coexistence of Cd(II) could promote the removal of Cr(VI) by 9.20%, while the coexistence of Cr(VI) could inhibit the removal of Cd(II) by 43.47%. This work provides a new pathway for the adsorption of Cr(VI) and Cd(II) in binary systems, suggesting that BC-SnZVI shows great potential for the co-removal of Cr(VI) and Cd(II) in wastewater.

Transport of ZIF-8 in porous media under the influence of surfactant type and nanoparticle concentration

Knowledge of the fate and transport of metal-organic frameworks (MOFs) in porous media is essential to understanding their environmental impacts. However, to date, the transport mechanisms of MOFs are not fully revealed. Meanwhile, surfactants can promote MOFs dispersion by forming a stable suspension. They also allow MOFs to migrate in the aqueous environment, which would increase the risks of MOFs being exposed to human health and the ecological environment. In this study, the effect of surfactants type and nanoparticle (NP) concentrations (50, 100, and 200 mg/L) were investigated using a sand column to study the transportability of ZIF-8 NPs in saturated porous media. Surfactants used were categorized into three groups, including cationic surfactants (CTAB, DTAB), anionic surfactants (SDBS, SDS), and nonionic surfactants (Tween 80, Tween 20). Experimental results showed that the ionic surfactants significantly increased the transportability of ZIF-8 NPs. Furthermore, a low concentration of NPs tended to break through the column under ionic surfactant conditions, and the maximum effluent recovery of ZIF-8 NPs (50 mg/L) was 87.4% in the presence of SDS. Nevertheless, ZIF-8 NPs tended to deposit in the inlet of the sand column in the presence of nonionic surfactants due to hydrodynamic bridging and straining. This research provides a comprehensive understanding of the deposition mechanism of ZIF-8 NPs as affected by surfactant types and NP concentrations. Most importantly, the study highlights those ionic surfactants had a significant impact on the mobility of ZIF-8 NPs, which arouses attention to the ecological and human health risk assessment related to the manufacturing of MOFs with the aid of various dispersing agents.

Synthesis of Iron-Based Carbon Microspheres with Tobacco Waste Liquid and Waste Iron Residue for Cd(II) Removal from Water and Soil

Herein, a novel magnetic iron-based carbon microsphere was prepared by cohydrothermal treatment of tobacco waste liquid (TWL) and waste iron residue (WIR) to form WIR@TWL. After that, WIR@TWL was coated with sodium polyacrylate (S.P.) to fabricate WIR@TWL@SP, whose removal efficiency for bivalent cadmium (Cd(II)) was studied in water and soil. As a result, WIR@TWL@SP possessed a high Cd(II) removal efficiency, which could reach 98.5% within 2 h. The adsorption process was consistent with the pseudo-second-order kinetic model because of the higher value of adjusted R2 (0.99). The thermodynamic data showed that the adsorption process was spontaneous (ΔG° < 0) and exothermic (ΔH° = 32.42 KJ·mol-1 > 0). Cd(II) removal mechanisms also include cation exchange, electrostatic attraction, hydrogen-bond interaction, and cation-π interaction. Notably, pot experiments demonstrated that WIR@TWL@SP could effectively reduce Cd absorption by plants in water and soil. Thus, this study offers an effective method for remediating Cd(II)-contaminated water and soil and may have a practical application value.

A sodium hyposulfite fuel cell for efficient Cr(VI) removal

This work shows a strategy of reducing hexavalent chromium (Cr(VI)) by sodium hyposulfite (Na₂S₂O₃) with self-generated electricity via a dual-chamber non-biological fuel cell (D-nBFC). Therein, Na₂S₂O₃ was electro-oxidized on graphite felt (GF) at anode and Cr(VI) in strong acidic solution was electro-reduced at GF/CCP cathode (GF decorated with conductive carbon paint (CCP)). Additionally, an agar salt bridge, consisting of saturated KCl solution, was introduced to form complete circuit by offering ions. The results showed that Cr(VI) was reduced to trivalent chromium (Cr(III)) and the D-nBFC system could produce electricity in this process. This system could obtain a high Cr(VI) removal efficiency (97.0%), 110 μA maximum current, and 13.4 mW m^-2 maximum power density in 4 h. In addition, the proposed system had high reusability after five cycles and the relative standard deviation was only 3.4% (n = 5). Thus, this D-nBFC system provides a promising and eco-friendly method for treatment of Cr(VI) pollution and generating electricity simultaneously, and also has potential application value for other heavy metals remediation.

Mechanistic insight into the removal of aqueous Cd using an immobilized ZIF-8 and microflora cooperative composite

Biotechnology and metal-organic-frameworks (MOFs) materials have been investigated intensively for the removal of heavy metal from wastewater. However, the cooperative effect of bacteria and MOFs on heavy metal adsorption was less reported. Considering this, this study has screened out microflora with cadmium (Cd) adsorption ability. Furthermore, it was combined with zeolitic imidazolate framework-8 (ZIF-8) to form a ZIF-8 and microflora complex (ZMC). Moreover, ZMC was further immobilized to improve its Cd adsorption effect and reusability. Results revealed that the immobilized ZMC exhibited 99.91% and 78.83% Cd adsorption rate for 20 mg L^-1 and 300 mg L^-1 Cd, respectively. Meanwhile, the immobilized ZMC maintained a relatively stable adsorption effect under varied external pH. The reaction mechanism was summarized as covalent binding accompanied with a small amount of electrostatic attraction. Microflora could enhance the surface electronegativity of ZIF-8. ZIF-8 could strengthen the response of antioxidant activity of microflora and augmented the affinity of microflora secretions for Cd. This proposed method may provide a new insight for the removal of heavy metal contaminants in water.