Petroleum sludge polluted soil remediation: Integrated approach involving novel bacterial consortium and nutrient application

Microalgal and activated sludge processing for biodegradation of textile dyes

The textile industry contributes substantially to water pollution. To investigate bioremediation of dye-containing wastewater, the decolorization and biotransformation of three textile azo dyes, Red HE8B, Reactive Green 27, and Acid Blue 29, were considered using an integrated remediation approach involving the microalga Chlamydomonas mexicana and activated sludge (ACS). At a 5 mg L-1 dye concentration, using C. mexicana and ACS alone, decolorization percentages of 39%-64% and 52%-54%, respectively, were obtained. In comparison, decolorization percentages of 75%-79% were obtained using a consortium of C. mexicana and ACS. The same trend was observed for the decolorization of dyes at higher concentrations, but the potential for decolorization was low. The toxic azo dyes adversely affect the growth of microalgae and at high concentration 50 mg L-1 the growth rate inhibited to 50-60% as compared to the control. The natural textile wastewater was also treated with the same pattern and got promising results of decolorization (90%). Moreover, the removal of BOD (82%), COD (72%), TN (64%), and TP (63%) was observed with the consortium. The HPLC and GC-MS confirm dye biotransformation, revealing the emergence of new peaks and the generation of multiple metabolites with more superficial structures, such as N-hydroxy-aniline, naphthalene-1-ol, and sodium hydroxy naphthalene. This analysis demonstrates the potential of the C. mexicana and ACS consortium for efficient, eco-friendly bioremediation of textile azo dyes.

A comparative analysis of soil physicochemical properties and microbial community structure among four shelterbelt species in the northeast China plain

Conducting studies that focus on the alterations occurring in the soil microbiome within protection forests in the northeast plain is of utmost importance in evaluating the ecological rehabilitation of agricultural lands in the Mollisols region. Nevertheless, the presence of geographic factors contributes to substantial disparities in the microbiomes, and thus, addressing this aspect of influence becomes pivotal in ensuring the credibility of the collected data. Consequently, the objective is to compare the variations in soil physicochemical properties and microbial community structure within the understory of diverse shelterbelt species. In this study, we analyzed the understory soils of Juglans mandshurica (Jm), Fraxinus mandschurica (Fm), Acer mono (Am), and Betula platyphylla (Bp) from the same locality. We employed high-throughput sequencing technology and soil physicochemical data to investigate the impact of these different tree species on soil microbial communities, chemical properties, and enzyme activities in Mollisols areas. Significant variations in soil nutrients and enzyme activities were observed among tree species, with soil organic matter content ranging from 49.1 to 67.7 g/kg and cellulase content ranging from 5.3 to 524.0 μg/d/g. The impact of tree species on microbial diversities was found to be more pronounced in the bacterial community (Adnoism: R = 0.605) compared to the fungal community (Adnoism: R = 0.433). The linear discriminant analysis effect size (LEfSe) analysis revealed a total of 5 (Jm), 3 (Bp), and 6 (Am) bacterial biomarkers, as well as 2 (Jm), 6 (Fm), 4 (Bp), and 1 (Am) fungal biomarker at the genus level (LDA3). The presence of various tree species was observed to significantly alter the relative abundance of specific microbial community structures, specifically in Gammaproteobacteria, Ascomycota, and Basidiomycota. Furthermore, environmental factors, such as pH, total potassium, and available phosphorus were important factors influencing changes in bacterial communities. We propose that Fm be utilized as the primary tree species for establishing farmland protection forests in the northeastern region, owing to its superior impact on enhancing soil quality.

IMPORTANCE

The focal point of this study lies in the implementation of a controlled experiment conducted under field conditions. In this experiment, we deliberately selected four shelterbelts within the same field, characterized by identical planting density, and planting year. This deliberate selection effectively mitigated the potential impact of extraneous factors on the three microbiomes, thereby enhancing the reliability and validity of our findings.

Iturin: A Promising Cyclic Lipopeptide with Diverse Applications

This comprehensive review examines iturin, a cyclic lipopeptide originating from Bacillus subtilis and related bacteria. These compounds are structurally diverse and possess potent inhibitory effects against plant disease-causing bacteria and fungi. Notably, Iturin A exhibits strong antifungal properties and low toxicity, making it valuable for bio-pesticides and mycosis treatment. Emerging research reveals additional capabilities, including anticancer and hemolytic features. Iturin finds applications across industries. In food, iturin as a biosurfactant serves beyond surface tension reduction, enhancing emulsions and texture. Biosurfactants are significant in soil remediation, agriculture, wound healing, and sustainability. They also show promise in Microbial Enhanced Oil Recovery (MEOR) in the petroleum industry. The pharmaceutical and cosmetic industries recognize iturin's diverse properties, such as antibacterial, antifungal, antiviral, anticancer, and anti-obesity effects. Cosmetic applications span emulsification, anti-wrinkle, and antibacterial use. Understanding iturin's structure, synthesis, and applications gains importance as biosurfactant and lipopeptide research advances. This review focuses on emphasizing iturin's structural characteristics, production methods, biological effects, and applications across industries. It probes iturin's antibacterial, antifungal potential, antiviral efficacy, and cancer treatment capabilities. It explores diverse applications in food, petroleum, pharmaceuticals, and cosmetics, considering recent developments, challenges, and prospects.

Enhanced phytoremediation of petroleum-contaminated soil by biochar and urea

Application of bioremediation in petroleum-contaminated soils is limited by its low efficiency. Although biochar and urea are commonly used soil additives, their potential beneficial effect on the bioremediation of petroleum contamination have rarely been discussed. In this study, biochar and urea were combined to test their effects on the phytoremediation of petroleum-contaminated soil in pot experiments. Our results showed that the degradation rate of total petroleum hydrocarbons reached 49.6%, 38.3%, 42.5%, and 77.9% when the soil was treated with biochar, urea, ryegrass, and their integrated application treatment (PBCN), respectively. A number of soil physicochemical properties (e.g., pH, elements, aggregate distribution, and organic matter composition) altered by the treatments were found to be linked to the accelerated degradation of petroleum hydrocarbons. The activities of soil dehydrogenase, lipase, and urease, and the abundances of 16 s rRNA gene and alkane degradation-related genes could be increased simultaneously when biochar, urea, and ryegrass were co-applied. Furthermore, urea significantly reduced soil bacterial α-diversity, while soil bacterial community dissimilation was mainly driven by urea and ryegrass. Lysobacter, xanthomonadaceae, and longimicrobia could be biomarker species in the PBCN group. Soil bacterial network analysis showed that biochar and urea application decreased the network complexity and robustness, while ryegrass behaved inversely. Lastly, soil metabolomic analysis revealed that root soil metabolites were greatly affected by urea-addition during phytoremediation, and co-application of biochar and urea could activate the putative metabolism pathway of petroleum hydrocarbons in root soil (e.g., naphthalene and anthracene degradation, and pyruvate metabolism). In summary, this study confirmed the enhancement of biochar and urea application in the phytoremediation of petroleum-contaminated soil and explored the internal mechanism of the interactive effect, which can potentially improve the development of eco-friendly and cost-effective in-situ bioremediation technology for petroleum-contaminated soils.

Enzymatic Assessment of the State of Oil-Contaminated Soils in the South of Russia after Bioremediation

Soil pollution with oil as a result of accidents at oil pipelines and oil refineries is a frequent occurrence in the south of Russia. To restore such polluted lands, it is necessary to carry out soil remediation measures. This work aimed to evaluate the use of ameliorants of various natures (biochar, sodium humate, and microbial preparation Baikal EM-1) to restore the ecological state of oil-contaminated soils with different properties (Haplic Chernozem, Haplic Arenosols, Haplic Cambisols). To assess the ecological state of soils, the following physicochemical and biological indicators were studied: residual oil content, redox potential, and medium reaction (pH). Changes in enzymatic activity were also studied, including catalase, dehydrogenases, invertase, urease, and phosphatase. The greatest decomposition of oil in Haplic Chernozem and Haplic Cambisols was provided by Baikal EM-1 (56 and 26%), and in Haplic Arenosols, this was provided by biochar (94%) and sodium humate (93%). In oil-contaminated Haplic Cambisols, the content of easily soluble salts with the addition of biochar and Baikal EM-1 increased by 83 and 58%, respectively. The introduction of biochar caused an increase in pH from 5.3 (Haplic Cambisols) to 8.2 (Haplic Arenosols). The introduction of oil-contaminated Haplic Arenosols of biochar, humate, and Baikal stimulated the activity of catalase and dehydrogenases by 52-245%. The activity of invertase was stimulated in the Haplic Chernozem after the introduction of ameliorants by 15-50%. The activity of urease was stimulated after the introduction of ameliorants into borax and Arenosol by 15-250%. The most effective ameliorant for restoring the ecological state of Haplic Cambisols after oil pollution was biochar. For Haplic Arenosols, this was sodium humate, and for Haplic Chernozem, the effectiveness of biochar and sodium humate did not differ. The most informative indicator for the remediation of Haplic Chernozem and Haplic Cambisols was the activity of dehydrogenases, and for Haplic Arenosols, this was the activity of phosphatase. The results of the study should be used to biomonitor the ecological state of oil-contaminated soils after bioremediation.

Rapid effective treatment of waxy oily sludge using a method of dispersion combined with biodegradation in a semi-fluid state

Waxy oily sludge (WOS) from petrochemical enterprises has complex components and difficult treatment. Long-term large-scale stacking has seriously threatened human health and the ecological environment. In this paper, a new rapid and effective treatment method combining dispersion and biodegradation in a semi-fluid state was developed for the WOS. The degradation mechanism of the WOS in the bioreactor was preliminarily discussed. The component analysis results showed that the compounds with large molecular weight (M ≥ 282) in the WOS accounted for more than 50%. Among all microbial consortiums, the treatment effect of the consortium FF: NY3 = 9: 1 was the best for treating the crude oil in WOS, which was significantly different from that of a single strain (p < 0.05). Under the optimal nitrogen source NH₄NO₃ and the concentration of rhamnolipid, the developed high-efficiency microbial consortium (FF: NY3 = 9:1) could remove 85% of the total hydrocarbon pollutants in the 20 L semi-fluid bioreactor within 9 days. The degradation characteristics of WOS components in the bioreactor showed that the developed consortium has good degradation ability for n-alkanes (about 90%), middle- (77.35%)/long-chain (72.66%) isomeric alkanes, alkenes (79.12%), alicyclic hydrocarbons (78.9%) and aromatic hydrocarbons (62.78%). The kinetic analysis results indicated that, in comparison, the middle-chain n-alkanes, middle-chain isomeric saturated alkanes, alkenes, and alicyclic hydrocarbons were most easily removed. The removal rates of long-chain n-alkanes, long-chain isomeric saturated alkanes, and aromatic hydrocarbons were relatively low. The biological toxicity test showed that the germination rate of wheat seeds in treated waxy sludge was Significantly higher than that in untreated waxy sludge (p < 0.01). These results suggest that the new method developed in this paper can treat refractory WOS quickly and effectively. This method lays the foundation for the pilot-scale treatment of the semi-fluid bioreactor.

Prospective review on bioelectrochemical systems for wastewater treatment: Achievements, hindrances and role in sustainable environment

Bioelectrochemical systems (BESs) are a relatively new arena for producing bioelectricity, desalinating sea water, and treating industrial effluents by removing organic matter. Microbial electrochemical technologies (METs) are promising for obtaining value-added products during simultaneous remediation of pollutants from wastewater. The search for more affordable desalination technology has led to the development of microbial desalination cells (MDCs). MDC combines the operation of microbial fuel cells (MFC) with electrodialysis for water desalination and energy generation. It has received notable interest of researchers in desalination and wastewater treatment because of low energy requirement and eco-friendly nature. Firstly, this article provides a brief overview of MDC technology. Secondly, factors affecting functioning of MDC and its applications have been accentuated. Additionally, challenges and future outlook on the development of this technology have been delineated. State-of-the-art information provided in this review would expand the scope of interdisciplinary and translational research.

Evolution in mitigation approaches for petroleum oil-polluted environment: recent advances and future directions

Increasing petroleum consumption and a rise in incidental oil spillages have become global concerns owing to their aquatic and terrestrial toxicity. Various physicochemical and biological treatment strategies have been studied to tackle them and their impact on environment. One of such approaches in this regard is the use of microbial processes due to their being "green" and also apparent low cost and high effectiveness. This review presents the advancement in the physical and biological remediation methods and their progressive efficacy if employed in combination of hybrid modes. The use of biosurfactants and/or biochar along with microbes seems to be a more effective bioremediation approach as compared to their individual effects. The lacuna in research at community or molecular level has been overcome by the recent introduction of "-omics" technology in hydrocarbon degradation. Thus, the review further focuses on presenting the state-of-art information on the advancement of petroleum bioremediation strategies and identifies the research gaps for achieving total mitigation of petroleum oil.

Efficient removal of tar employing dolomite catalyst in gasification: Challenges and opportunities

Fossil fuels are currently the dominant source of electricity and energy production around the world. Biomass is one of the most referred renewable carbonaceous resource(s) that can be employed for the waste-to-energy concept. Syngas obtained from biomass gasification can be utilized for a variety of key industrial purposes, including internal gasification engine operation, power generation, and hydrocarbon compound production using the Fisher-Tropsch technique. However, the existence of impurities such as hydrogen sulfide, tar, and particulate matter along with other undesirable chemicals present in syngas are major disadvantages of biomass gasification. Tar is the most difficult among all the pollutants to be removed from syngas; it also causes serious problems in downstream syngas applications. For decades, studies have been performed with various catalysts to remove the tar. Dolomite has shown positive response for tar elimination and hydrogen-enriched gas production. Several studies have been carried out on dolomite for eliminating the tar from syngas. This review encompasses sources of solid waste, the mechanism of catalysis, and in-situ and ex-situ usage of dolomite in the gasification process. It addresses the key issues such as fragmentation and attrition, elutriation, and coke formation along with dolomite's usefulness in amalgamation with other catalysts, environmental consequences, and economic viability of dolomite applications. It also discusses the challenges and opportunities for tar removal using catalysts, with a specific focus on dolomite along with economic and environmental sustainability considerations.

Sustainable strategies for combating hydrocarbon pollution: Special emphasis on mobil oil bioremediation

The global rise in industrialization and vehicularization has led to the increasing trend in the use of different crude oil types. Among these mobil oil has major application in automobiles and different machines. The combustion of mobil oil renders a non-usable form that ultimately enters the environment thereby causing problems to environmental health. The aliphatic and aromatic hydrocarbon fraction of mobil oil has serious human and environmental health hazards. These components upon interaction with soil affect its fertility and microbial diversity. The recent advancement in the omics approach viz. metagenomics, metatranscriptomics and metaproteomics has led to increased efficiency for the use of microbial based remediation strategy. Additionally, the use of biosurfactants further aids in increasing the bioavailability and thus biodegradation of crude oil constituents. The combination of more than one approach could serve as an effective tool for efficient reduction of oil contamination from diverse ecosystems. To the best of our knowledge only a few publications on mobil oil have been published in the last decade. This systematic review could be extremely useful in designing a micro-bioremediation strategy for aquatic and terrestrial ecosystems contaminated with mobil oil or petroleum hydrocarbons that is both efficient and feasible. The state-of-art information and future research directions have been discussed to address the issue efficiently.

Biodegradation kinetics of binary mixture of hexadecane and phenanthrene by the bacterial microconsortium

Crude oil bioremediation requires a correct selection of potential biodegraders to address the hazard. The present study investigates biodegradation kinetics of single aliphatic (Hexadecane, HEX), aromatic (Phenanthrene, PHE), and binary mixture (HEX + PHE) as co-contaminants by axenic cultures of A. fabrum SLAJ 731, B. subtilis RSL2 and P. aeruginosa P7815 and their consortium. A proposed integrated kinetic model combining first-order exponential decay and the Monod equation is well-fitted to degradation data. Maximum degradations of both the substrates were observed for microcosm, indicating synergistic effects of selected strains. The degradation rate indicated parallel utilization of HEX while serial utilization of PHE by selected strains. Maximum HEX and PHE degradations of 92.4 and 88.7 % were achieved by microconsortium, which increased to 97.2 and 91.9 % for the binary mixture. The biodegradation efficiencies of HEX and PHE were linearly correlated with Alkane hydroxylase and Catechol-2,3-dioxygenase activities, respectively.

Optimization of conditions for a surfactant-producing strain and application to petroleum hydrocarbon-contaminated soil bioremediation

Petroleum hydrocarbon-contaminated sites have been mainly remediated through the surfactant-enhanced soil leaching method. However, the commonly used chemical surfactants have poor biocompatibility and are prone to form residues in fields. Therefore, the purpose of this research is to establish an effective system of biosurfactant remediation in the field and provide instructions for common bioremediation challenges. First, wild-type Bacillus amyloliquefaciens A3, which produced lipopeptide biosurfactant, was used to improve the production of biosurfactant by atmosphere and room temperature plasma (ARTP) mutagenesis. Second, the mutant 1-24 was selected from a total of 174 mutants due to the outstanding yield. Subsequently, 1-24 was applied in the soil column leaching experiments and removed 45.44% of petroleum hydrocarbons by changing the relevant enzyme activities. Biosurfactant addition and 1-24 inoculation effectively activated a portion of the petroleum hydrocarbons in the soil columns, and 1-24 presented potential as a desired candidate for bioremediation. This is the first report of using ARTP mutagenesis to improve the production of biosurfactants. Simultaneously, we first propose a theoretical system in which the yield of biosurfactant was increased using ARTP mutagenesis for strains and applied the mutants in situ soil bioremediation. This research indicated that the theoretical system was useful in soil columns to simulate field remediation conditions, providing practical references for the bioremediation of contaminated soil.

Cost reduction strategies in the remediation of petroleum hydrocarbon contaminated soil

Petroleum hydrocarbon spill on land pollutes soil and reduces its ecosystem. Hydrocarbon transport in the soil is aided by several biological, physical, and chemical processes. However, pore characteristics play a major role in the distribution within the soil matrix. Restoring land use after spills necessitates remediation using cost-effective technologies. Several remediation technologies have been demonstrated at different scales, and research is ongoing to improve their performances towards the reduction of treatment costs. The process of removing the contaminants in the soil is through one or a combination of containment, separation, and degradation methods under the influence of biological, physical, chemical, and electrically-dominated processes. Generally, performance improvement is achieved through the introduction of products/materials and/or energy. Nevertheless, the technologies can be categorized based on effectiveness period as short, medium, and long term. The treatment cost of short, medium, and long-term technologies are usually in the range of $39 - 331/t (/tonne), $22 - 131/t, and $8 - 131/t, respectively. However, the total cost depends on other factors such as site location, capital cost, and permitting. This review compiles cost-saving strategies reported for different techniques used in remediating petroleum hydrocarbon polluted soil. We discuss the principles of contaminant removal, performance enhancing methods, and the cost-effectiveness analysis of selected technologies.

Microbial Biocontainment Systems for Clinical, Agricultural, and Industrial Applications

Many applications of synthetic biology require biological systems in engineered microbes to be delivered into diverse environments, such as for in situ bioremediation, biosensing, and applications in medicine and agriculture. To avoid harming the target system (whether that is a farm field or the human gut), such applications require microbial biocontainment systems (MBSs) that inhibit the proliferation of engineered microbes. In the past decade, diverse molecular strategies have been implemented to develop MBSs that tightly control the proliferation of engineered microbes; this has enabled medical, industrial, and agricultural applications in which biological processes can be executed in situ. The customization of MBSs also facilitate the integration of sensing modules for which different compounds can be produced and delivered upon changes in environmental conditions. These achievements have accelerated the generation of novel microbial systems capable of responding to external stimuli with limited interference from the environment. In this review, we provide an overview of the current approaches used for MBSs, with a specific focus on applications that have an immediate impact on multiple fields.

Microbial Consortia Are Needed to Degrade Soil Pollutants

Soil pollution is one of the most serious environmental problems globally due to the weak self-purification ability, long degradation time, and high cost of cleaning soil pollution. The pollutants in the soil can be transported into the human body through water or dust, causing adverse effects on human health. The latest research has shown that the clean-up of soil pollutants through microbial consortium is a very promising method. This review provides an in-depth discussion on the efficient removal, bio-adsorption, or carbonated precipitation of organic and inorganic pollutants by the microbial consortium, including PAHs, BPS, BPF, crude oil, pyrene, DBP, DOP, TPHP, PHs, butane, DON, TC, Mn, and Cd. In view of the good degradation ability of the consortium compared to single strains, six different synergistic mechanisms and corresponding microorganisms are summarized. The microbial consortium obtains such activities through enhancing synergistic degradation, reducing the accumulation of intermediate products, generating the crude enzyme, and self-regulating, etc. Furthermore, the degradation efficiency of pollutants can be greatly improved by adding chemical materials such as the surfactants Tween 20, Tween 80, and SDS. This review provides insightful information regarding the application of microbial consortia for soil pollutant removal.

Co-culture of microalgae-activated sludge in sequencing batch photobioreactor systems: Effects of natural and artificial lighting on wastewater treatment

Co-culture using microalgae-activated sludge in Sequencing Batch Photobioreactors (PBRs) was investigated for wastewater treatment performance. This study evaluated the effect of natural and artificial lighting conditons on treatment performance under consideration of energy consumption. The results found that the removal of nutrients and COD of natural lighting condition was only 10% and 13% lower than those of artificial lighting respectively. Generally, artificial lighting mode took an advantage in pollutants removal. However, standing at 0.294 kWh L^-1, the total energy consumption of natural lighting was over two times less than that of artificial lighting. It reveals the natural lighting system played a dominant role for cutting energy costs significantly compared to artificial lighting one (∼57%). As a practical viewpoint on energy aspect and treatment performance, a natural lighting PBR system would be a sustainable option for microalgae-activated sludge co-culture system treating wastewater.

Recovery of resources from industrial wastewater employing electrochemical technologies: status, advancements and perspectives

In the last two decades, water use has increased at twice the rate of population growth. The freshwater resources are getting polluted by contaminants like heavy metals, pesticides, hydrocarbons, organic waste, pathogens, fertilizers, and emerging pollutants. Globally more than 80% of the wastewater is released into the environment without proper treatment. Rapid industrialization has a dramatic effect on developing countries leading to significant losses to economic and health well-being in terms of toxicological impacts on humans and the environment through air, water, and soil pollution. This article provides an overview of physical, chemical, and biological processes to remove wastewater contaminants. A physical and/or chemical technique alone appears ineffective for recovering useful resources from wastewater containing complex components. There is a requirement for more processes or processes combined with membrane and biological processes to enhance operational efficiency and quality. More processes or those that are combined with biological and membrane-based processes are required to enhance operational efficiencies and quality. This paper intends to provide an exhaustive review of electrochemical technologies including microbial electrochemical technologies. It provides comprehensive information for the recovery of metals, nutrients, sulfur, hydrogen, and heat from industrial effluents. This article aims to give detailed information into the advancements in electrochemical processes to energy use, improve restoration performance, and achieve commercialization. It also covers bottlenecks and perspectives of this research area.

Enhanced biodegradation and valorization of drilling wastewater via simultaneous production of biosurfactants and polyhydroxyalkanoates by Pseudomonas citronellolis SJTE-3

Pseudomonas citronellolis SJTE-3 was isolated as a highly efficient microorganism for biodegradation and valorization of drilling fluids (DF) wastewater. The strain metabolised DF and oily mud exhibiting up to 93%, 86%, 85% and 88% of chemical oxygen demand (COD), n-dodecane, n-tetradecane and naphthalene removal efficiency respectively. Enhanced bioconversion was enabled through production of biosurfactants that reduced the surface tension of water by 53% and resulted in 43.3% emulsification index (E24), while synthesizing 24% of dry cell weight (DCW) as medium-chain-length polyhydroxyalkanoates (PHA). Expression from the main pathways for alkanes and naphthalene biodegradation as well as biosurfactants and PHA biosynthesis revealed that although the alkanes and naphthalene biodegradation routes were actively expressed even at stationary phase, PHA production was stimulated at late stationary phase and putisolvin could comprise the biosurfactant synthesized. The bioconversion of toxic petrochemical residues to added-value thermoelastomers and biosurfactants indicate the high industrial significance of P. citronellolis SJTE-3.