Enhanced adsorption activity for phosphate removal by functional lignin-derived carbon-based adsorbent: Optimization, performance and evaluation

Improving the adsorption properties of low surface area hardwood biochar for the removal of Fe+ and PO₄3- from aqueous solution

Biochar produced from wood residues may provide a new method and material for managing the environment, particularly in terms of carbon sequestration and contaminant remediation. Additionally, biochar produced from wood residues is free of chemical fertilizers, likewise in rice straw, wheat straw, corn straw, etc. This study investigated the removal of iron from aqueous solutions by a novel low-cost and eco-friendly biochar made from hardwood trees and modified by adding MgCl2 for effective phosphate removal. Optimal adsorption conditions were determined through studies of adsorption time, pH, and adsorbent dosage. Batch equilibrium isotherm and kinetic experiments and pre/post-adsorption characterizations using FESEM-EDS, XRD, and FTIR suggested that the presence of carboxyl group elements and colloidal and nano-sized MgO (periclase) particles on the biochar surface were the main adsorption sites for aqueous iron and phosphate respectively. In this study, the HW and MgO-HW biochar showed excellent Dubinin-Radushkevich isotherm (D-R) maximum adsorption capacities of 289.45 and 828.82 mg/g for iron and phosphate. The kinetic study for iron and phosphate adsorption was described well by pseudo second-order model and pseudo second-order model respectively. The HW biochar and the prepared MgO-HW biochar exhibited commendable iron adsorption (98.25%) performance at 10 pH units and phosphate (96.22%) at pH 6 respectively. Thus, this research reveals a waste-to-wealth strategy by converting hardwood waste into mineral-biomass biochar with excellent Fe and P adsorption capabilities and environmental adaptability.

Conversion of acidified lignin containing sulfur discharged from a biorefinery process into neutralized biochar: Characterization and metal adsorption

The objectives of this study were to produce biochars using sulfur-rich acidified lignin discharged from a biorefinery process and to evaluate their physicochemical properties and Pb adsorption capacity. As the pyrolysis temperature increased, the lignin acidified by the desulfurization process was converted to neutralized biochar (LBC), which exhibited high carbon content and stability. The carbon content of biochar manufactured at a pyrolysis temperature of 600 °C or higher was over 90 % and showed no significant difference, and their surface structures were found to be different, as revealed through XRD and FTIR analyses. The adsorption capacity of Pb by LBC increased with increasing pyrolysis temperature, and their adsorption capacity was well described by the pseudo-second-order model and the Langmuir isotherm adsorption model. In particular, the internal diffusion effect on the adsorption capacity of Pb was greater for LBC900 than for LBC600. In complex heavy metal solutions, LBC selectively exhibited high affinity for Pb, while the adsorption capacity of other metals was significantly reduced. The adsorption mechanism of Pb by LBC was verified through various analytical methods, and these results demonstrated that the adsorption of Pb by LBC was influenced by functional groups existing on the surface and inside of LBC and by some cation exchange.

Machine learning-driven prediction of phosphorus removal performance of metal-modified biochar and optimization of preparation processes considering water quality management objectives

Developing an optimized and targeted design approach for metal-modified biochar based on water quality conditions and management is achievable through machine learning. This study leveraged machine learning to analyze experimental data on phosphate adsorption by metal-modified biochar from literature published in Web of Science. Using six machine learning models, the phosphate adsorption capacity of biochar and residual phosphate concentration were predicted. After hyperparameter optimization, the gradient boosting model exhibited superior training performance (R2 > 0.96). Metal load quantity, solid-liquid ratio, and pH were key factors influencing adsorption performance. Optimal preparation parameters indicated that Mg-modified biochar achieved the highest adsorption capacity (387-396 mg/g), while La-modified biochar displayed the lowest residual phosphate concentration (0 mg/L). The results of verification experiments based on optimized process parameters closely aligned with model predictions. This study introduces a new machine learning-based approach for tailoring biochar preparation processes considering different water quality management objectives.

Utilization and value-adding of waste: Fabrication of porous material from chitosan for phosphate capture and energy storage

Efficient removal and recycling of phosphorus from complex water matrices using environmentally friendly and sustainable materials is essential yet challenging. To this end, a novel bio-based adsorbent (DX-FcA-CS) was developed by coupling oxidized dextran-crosslinked chitosan with ferrocene carboxylic acid (FcA). Detailed characterization revealed that the incorporation of FcA reduced the total pore area of DX-FcA-CS to 7.21 m2·g-1, one-third of ferrocene-free DX-CS (21.71 m2·g-1), while enhancing thermal stability and PO43- adsorption performance. Adsorption kinetics and isotherm studies demonstrated that the interaction between DX-FcA-CS and PO43- followed a pseudo-second-order kinetic model and Langmuir model, indicating chemical and monolayered adsorption mechanisms, respectively. Moreover, DX-FcA-CS exhibited excellent anti-interference properties against concentrated co-existing inorganic ions and humic acid, along with high recyclability. The maximum adsorption capacity reached 1285.35 mg·g-1 (∼428.45 mg P g-1), three times that of DX-CS and surpassing many other adsorbents. PO43--loaded DX-FcA-CS could be further carbonized into electrode material due to its rich content of phosphorus and nitrogen, transforming waste into a valuable resource. These outstanding characteristics position DX-FcA-CS as a promising alternative for phosphate capture and recycling. Overall, this study presents a viable approach to designing environmentally friendly, recyclable, and cost-effective biomaterial for wastewater phosphate removal and value-added applications.

Tree transpiration-inspired cellulose aerogel with engineered cold-evaporated surface for promoting structural stability and minimizing energy loss

Solar-driven evaporation technology could significantly relieve the fresh-water crisis in the world. However, several problems, such as poor structural stability, low photothermal conversion capacity, and single heat source of traditional evaporators limited the promotion of fresh-water production efficiency. Herein, inspired by tree transpiration, we report a hydrophilic three-dimensional (3D) cellulose-based evaporator similar to the root of a tree, which can pump the bottom water to the evaporation surface for vapor generation. The aldehyde-based cellulose nanocrystals/ethylene imine polymer (ACP) aerogel was developed through Schiff base reaction to enhance the chain entangle capacity of the cellulose nanocrystals (CNCs) aerogel in water. Coating the ACP aerogel with lignin-derived photothermal material created the double-layered solar-driven evaporator (ACP-7LM), achieving a remarkable surface temperature of 35.9 °C in water under 1 sun irradiation for 1 h. The ACP-7LM exhibited an impressive evaporation rate of 1.60 kg m-2 h-1, leveraging its structural stability and excellent photothermal conversion. Increasing the cold evaporation surface (adjusting exposure height from 0 cm to 4 cm) of ACP-7LM aerogel maintained a lower temperature compared to ambient temperature on the side surface during evaporation, which harvest heat energy from environment and minimize energy loss. This enhanced environmental heat absorption boosted the ACP-7LM's evaporation rate to 3.76 kg m-2 h-1, a 2.35-fold increase over the ACP-7LM (0 cm). This solar-driven evaporator offers an efficient, innovative approach to elevate evaporation rates and address the global water crisis by simultaneously enhancing heat absorption capacity and photothermal conversion efficiency.

Polymer-based nanocomposite adsorbents for resource recovery from wastewater

Developing mitigation mechanisms for eutrophication caused by the uncontrolled release of nutrients is in the interest of the scientific community. Adsorption, being operationally simple and economical with no significant secondary pollution, has proven to be a feasible technology for resource recovery. However, the utility of adsorption often lies in the availability of effective adsorbents. In this regard, polymer-based nanocomposite (PNC) adsorbents have been highly acclaimed by researchers because of their high surface area, multiple functional groups, biodegradability, and ease of large-scale production. This review paper elaborates on the functionality, adsorption mechanisms, and factors that affect the adsorption and adsorption-desorption cycles of PNC adsorbents toward nutrient resources. Moreover, this review gives insight into the application of recovered nutrient resources in soil amendment.

Efficient removal of phosphate from aqueous media using magnetic bimetallic lanthanum‑iron-modified sulfonylmethylated lignin biochar

The use of lignin carbon as an adsorbent for the adsorption of phosphates from wastewater is a promising technology. However, most lignin carbon-based adsorbents still suffer from low adsorption efficiency and poor selectivity. Herein, a novel FeLaO3-modified sulfomethylated lignin (SL) biochar adsorbent (FLO@CSL) was prepared for phosphate removal. The development of this adsorbent took into consideration the strong affinity of lanthanum (La) and iron (Fe) (hydro) oxides for phosphate and the excellent carrier properties of lignin-based biochar. As the core of FLO@CSL, FeLaO3 active sites are highly dispersed on the surface of SL biochar. Besides, doping of Fe(III) not only imparts magnetic properties to FLO@CSL, thereby effectively improving the separation efficiency of the adsorbent, but also enhances the phosphate adsorption performance. Performance studies revealed that FLO@CSL exhibits remarkable adsorption selectivity and substantial phosphate-adsorption capacity. Notably, the maximum adsorption capacity was found to be 137.14 mg P g-1. Phosphate adsorption on the FLO@CSL surfaces proceeds via chemisorption in a single layer, and ligand exchange plays an important role in determining the adsorption behaviour. Because of its exceptional selectivity, remarkable adsorption capacity and outstanding magnetic separation efficiency, FLO@CSL is a highly promising adsorbent material for effectively treating phosphates in wastewater.

Synthesis of magnetic sodium lignosulfonate hydrogel(Fe3O4@LS) and its adsorption behavior for Cd2+ in wastewater

Heavy metal pollution is becoming increasingly serious. Heavy metal pollutants are nonbiodegradable and can be bioenriched through the food chain, and thus, they greatly threaten the environment and human health. Hydrogels, as an ideal adsorbent, have been widely used to treat heavy metal industrial wastewater. Sodium lignosulfonate hydrogel (LS) was prepared by free-radical grafting copolymerization, and nano-Fe3O4 particles were loaded in LS by an in-situ precipitation method (Fe3O4@LS). The magnetic properties and adsorption capacity of Fe3O4@LS are closely related to the load capacity of Fe3O4. XRD, FTIR, XPS, SEM, TEM, BET, and TGA analyses of the materials were performed. Subsequently, the removal effect of the typical pollutant Cd2+ in heavy metal-polluted water was studied with Fe3O4@LS as the adsorbent. The influences of the Fe3O4@LS dosage and initial pH were investigated, and the adsorption kinetics and thermodynamics were further explored and discussed. Finally, the adsorption mechanism of Fe3O4@LS on Cd2+ was obtained. Results show that Fe3O4@LS has a more stable spatial network structure than LS, and the pore size, specific surface area and active sites increase. The maximum adsorption capacity can reach 88.00 mg/g when pH = 6 and the dosage of Fe3O4@LS is 1000 mg/L. The adsorption of Cd2+ by Fe3O4@LS conforms to pseudosecond-order kinetics and the Temkin isothermal adsorption model. Further mechanistic investigations show that the sorption of Cd2+ on Fe3O4@LS is mainly attributed to surface complexation, electrostatic attraction and coprecipitation. The coexistence of cations in water will inhibit the adsorption of Fe3O4@LS. Fe3O4@LS has superparamagnetism and a good response to an external magnetic field. The adsorption rate can still reach >60 % after four elutions with NaCl as the eluent. This material can be reused and has good application potential.

Hierarchical build-up of vertically oriented lignin-based aerogel for photothermally assisted uranium uptake and recovery from acidic wastewater

Developing the lignin-based functional materials for uranium uptake is extremely attractive, but challenging due to the complex structure, poor solubility and reactivity of lignin. Herein, a novel phosphorylated lignin (LP)/sodium alginate/ carboxylated carbon nanotube (CCNT) composite aerogel (LP@AC) with vertically oriented lamellar configuration was created for efficient uranium uptake from acidic wastewater. The successful phosphorylation of lignin by a facile solvent-free mechanochemical method achieved more than six-times enhancement in U(VI) uptake capacity of lignin. While, the incorporation of CCNT not only increased the specific surface area of LP@AC, but also improved its mechanical strength as a reinforcing phase. More importantly, the synergies between LP and CCNT components endowed LP@AC with an excellent photothermal performance, resulting in a local heat environment on LP@AC and further boosting the U(VI) uptake. Consequently, the light irradiated LP@AC exhibited an ultrahigh U(VI) uptake capacity (1308.87 mg g^-1), 61.26% higher than that under dark condition, excellent adsorptive selectivity and reusability. After exposure to 10 L of simulated wastewater, above 98.21% of U(VI) ions could be rapidly captured by LP@AC under light irradiation, revealing the tremendous feasibility in industrial application. The electrostatic attraction and coordination interaction were considered as the main mechanism for U(VI) uptake.

Enhanced phosphate adsorption studies on several metal-modified aluminum sludge: preparation optimization, adsorption behavior, and mechanistic insight

To solve the problems such as water eutrophication caused by excess phosphorus, the potential residual value of aluminum sludge was fully exploited and its phosphate adsorption capacity was further improved. In this study, twelve metal-modified aluminum sludge materials were prepared by co-precipitation method. Among them, Ce-WTR, La-WTR, Y-WTR, Zr-WTR, and Zn-WTR showed excellent adsorption capacity for phosphate. The adsorption performance of Ce-WTR on phosphate was twice that of the native sludge. The enhanced adsorption mechanism of metal modification on phosphate was investigated. The characterization results showed that the increase in specific surface area after metal modification was 9.64, 7.5, 7.29, 3, and 1.5 times, respectively. The adsorption of phosphate by WTR and Zn-WTR was in the accordance with Langmuir model, while the others were more following the Freundlich model (R² > 0.991). The effects of dosage, pH, and anion on phosphate adsorption were investigated. The surface hydroxyl groups and metal (hydrogen) oxides played an important role in the adsorption process. The adsorption mechanism involves physical adsorption, electrostatic attraction, ligand exchange, and hydrogen bonding. This study provides new ideas for the resource utilization of aluminum sludge and theoretical support for preparing novel adsorbents for efficient phosphate removal.

Adsorption performance of phosphate in water by mixed precursor base geopolymers

Design of low-cost and high-removal efficiency phosphate adsorbents is of great significance for the control of eutrophication. In this study, fly ash and metakaolin were used as raw materials to evaluate the capability of phosphate adsorption and to investigate the mechanism of phosphate adsorption. The results of comparing the adsorption effect of geopolymers prepared with different modulus of alkali activator showed that the removal efficiency of phosphate in water at 0.8 M was on average 30.33% higher than 1.2 M. Therefore, FA + MK-0.8 had the maximum removal efficiency of 94.21% for phosphate in water with the maximum adsorption capacity of 36.02 mg/kg. In addition, the adsorption of phosphate could be well fitted by pseudo-second-order model and the process was mainly controlled by film diffusion. The alkali activation process can destroy the octahedral structure of the raw material, so the geopolymer are mainly tetrahedral in structure. Interestingly, new zeolite structures were formed in the mineral crystal phase of FA + MK-0.8, which may facilitate the adsorption of phosphate by geopolymers. Furthermore, the combined FTIR and XRD analysis results indicated that the underlying mechanisms of phosphate adsorption were electrostatic gravitation, ligand exchange, and surface complexation. This research not only synthesizes low-cost and high removal efficiency wastewater purification materials, but also provides a promising application for the elimination and resource utilization of industrial solid waste.

Recent advancements in lignocellulose biomass-based carbon fiber: Synthesis, properties, and applications

A growing need to reduce the global carbon footprint has prompted all sectors to make significant efforts in this direction. For example, there has been much focus on green carbon fiber sustainability. For example, it was found that the polyaromatic heteropolymer lignin might act as an intermediary in synthesising carbon fiber. Biomass is seen as a potential carbon accommodated solid natural sources that protects the nature and has a big overall supply and widespread distribution. With growing environmental concern in recent years, biomass has gained appeal as a raw material for production of carbon fibers. Especially, the positives of lignin material include its reasonable budget, sustainability, and higher carbon content, which makes it a dominating precursor. This review has examined a variety of bio precursors that help produce lignin and have higher lignin concentrations. In addition, there has been much research on plant sources, lignin types, factors affecting carbon fiber synthesis, spinning methods, stabilization, carbonization, and activation the characterisation techniques used for the lignin carbon fiber to comprehend the structure and features. In addition, an overview of the applications that use lignin carbon fiber has been provided.

Pilot-scale phosphate recovery from wastewater to create a fertiliser product: An integrated assessment of adsorbent performance and quality

Eutrophication and the predicted limited future availability of rock phosphate has triggered the increased development of phosphorus (P) recovery technologies, however, for remote regions, recovery solutions are still limited. Here, we report on a novel pilot-scale technology (FILTRAFLO^TM-P reactor) to recover phosphate (PO₄^3-) from wastewater effluent through a filtration/adsorption process in a rural setting. This unit employs enhanced gravitational filtration through adsorption media (here, a novel KOH deacetylated crab carapace based chitosan-calcite material (CCM)) with continuous self-backwashing. Trials were designed to assess how the FILTRAFLO^TM-P unit would operate under 'real' conditions (both at low and high PO₄^3- levels), and to ascertain the effectiveness of the adsorbent to recover phosphate from final effluent. High removal was achieved at low phosphate concentrations, bringing the residual effluent PO₄^3- level below 1 mg/L (EU limit for sensitive water bodies), while phosphate was efficiently harvested (at more than 50%) at higher PO₄^3- levels. Surface microprecipitation and inner-sphere complexation were postulated as the main PO₄^3- adsorption mechanisms through XRD, XPS and EDX elemental mapping. Further, a quality assessment of the P-enriched CCM (which could be used as a potential soil amendment) was undertaken to consider elemental composition, microbiological assessment and quantification of organic micropollutants. Quality analysis indicated ∼2.5% P₂O₅ present, trace levels (well below legislative limits) of heavy metals and extremely low levels of organic pollutants (e.g., PCBs, pharmaceuticals). No detectable levels of target bacterial pathogens were observed. Pot trials showed that ryegrass cultivated with the addition of the CCM adsorbent achieved higher plant dry matter and P concentration when compared to unfertilised controls, with a slow-release kinetic pattern. This study showed that CCM used with the FILTRAFLO^TM-P pilot reactor has high potential to recover phosphate from effluents and encourage resource recovery via bio-based management of waste.

Polymer-based nanocomposite adsorbents for resource recovery from wastewater

Adsorption is alternative technique for recovery of nutrient resources with no/less secondary pollution. PNC adsorbents are effective for removal and recovery of nutrient resources, and reusing nutrients as fertilizer could prevent eutrophication.

Characteristics and Mechanisms of Phosphorous Adsorption by Peanut Shell-Derived Biochar Modified with Magnesium Chloride by Ultrasonic-Assisted Impregnation

Recovery of phosphate (P) from sludge, domestic wastewater, and industrial wastewater is beneficial for overcoming the problem of shortage of P rock resources. In this study, Mg-functionalized peanut shell-derived biochar was prepared by ultrasound-assisted impregnation. The obtained Mg-laden biochar had a higher content of Mg, a larger specific surface area, and more porosity. The prepared Mg-modified biochar exhibited excellent adsorption properties of phosphorus. Modified biochar has a higher amount of adsorbed P than raw biochar. The capacity of P adsorption by modified biochar was 30.48-114.24% higher than that by raw biochar. Moreover, the Mg-laden biochar can be applied in a wide working environment (pH: 2-10; temperature range: 15-40 °C). This study not only develops a new strategy for the preparation of high-capacity P adsorbents but also provides a new green use for agricultural peanut shells.

Lanthanum doped magnetic polyaniline for removal of phosphate ions from water

Herein, magnetic polyaniline was modified with lanthanum nanoparticles (MPANI@La) as adsorbent, aiming to the treatment of high phosphate-containing aquatic solutions. High valent lanthanum doped with polyaniline was a promising adsorbent to uptake phosphate ions with possible electrostatic interaction and cation exchange process. The functional groups, composition, surface morphology, and magnetic property of the adsorbent were investigated using Fourier Transform-Infrared Spectroscopy (FTIR), Energy Dispersive X-ray (EDX), Scanning Electron Microscopic (SEM), and Vibrating Sample Magnetometer (VSM), respectively. During the experimental process, MPANI@La has removed phosphate ions from water >90%, with 80 mg adsorbent, and shaking for 150 min at room temperature. In this regard, the process was fitted with the Pseudo-second-order kinetic model (R2 > 0.999) and the Langmuir isotherm (R2 > 0.99). The proposed nanoparticles provided an appropriate adsorption capacity (qm) of 45.24 mg.g-1 at pH 4 for phosphate ions. Besides, the adsorbent can be used with an efficiency of 92.49% up to three times that reduced to 52.89% after ten times. In addition, the adsorption process was justified by thermodynamics which confirmed the proposed adsorption mechanism. Hence, the models were provided surface adsorption, monolayer pattern, and the physical mechanism of the phosphate removal process using MPANI@La. Hence the proposed adsorbent can be used as an alternative adsorbent in environmental water remediation.

Fast pyrolysis of guaiacyl-syringyl (GS) type milled wood lignin: Product characteristics and CH4 formation mechanism study

It is anticipated that the insight into the demethylation and mechanism of CH₄ formation from natural lignin using in-situ diffuse reflectance infrared Fourier transform spectroscopy (in-situ FTIR) combined with two-dimensional perturbation correlation infrared spectroscopy (2D-PCIS) and density functional theory (DFT) calculation analysis would contribute to a deeper insight of bond cleavage mechanism of lignin pyrolysis. Herein, GS-type lignin (poplar MWL) was characterized by Fourier transform infrared spectroscopy (FTIR) and heteronuclear Single-Quantum Correlation Nuclear Magnetic Resonance (HSQC), and its pyrolysis at different temperatures was performed in a lab-scale fixed-bed reactor. The biochar, gaseous and liquid products were qualitative, and quantitative analysis of gases and bio-oil is demonstrated using gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). The key of CH₄ formation is the homolytic cleavage of the methoxyl functional group generating methyl radical and further verified via in-situ FTIR combined with 2D-PCIS and DFT calculation. The study established a new methodology based on multiple factor analysis to evaluate the CH₄ formation mechanism in GS-type milled wood lignin at the molecular level, which is of positive significance for increasing lignin valorization and improving the environment.

Preparation, adsorption performance and mechanism of MgO-loaded biochar in wastewater treatment: A review

Biochar is a low cost, porous and solid material with an extremely high carbon content, various types of functional groups, a large specific surface area and many other desirable characteristics. Thus, it is often used as an adsorbent or a loading matrix. Nano-magnesium oxide is a crystalline material with small particles and strong ion exchangeability. However, due to the high surface chemical energy, it easily forms agglomerates of particles. Therefore, to combine the advantages of biochar and magnesium, metal magnesium nanoparticles can be loaded onto the surface of biochar with different modification techniques, resulting in biochars with low cost and high adsorption performance to be used as an adsorption matrix (collectively referred to as Mg@BC). This review presents the effects of different Mg@BC preparation methods and synthesis conditions and summarizes the removal capabilities and adsorption mechanisms of Mg@BC for different types of pollutants in water. In addition, the review proposes the prospects for the development of Mg@BC to solve various problems in the future.

Variation behavior of organic compounds in melamine-urea-formaldehyde impregnated bond paper in different pyrolysis stages

Melamine-urea-formaldehyde impregnated bond paper (MUF) is widely used as panel coating and decorative raw paper. Inappropriate treatment of MUF may lead to environmental pollution. In this study, routine MUF and MUF treated with additional titanium (MUF-T) were subjected to fast pyrolysis, and the product properties at different temperatures were investigated. The pyrolysis temperature was selected considering the reaction stages determined by Gaussian curve-fitting on thermogravimetric analysis curves. It was found that the presence of additional titanium changed the decomposition order of the organic components at 220 °C. Urea-formaldehyde in MUF could be decomposed at 220 °C, which had little effect on other components (melamine and cellulose). However, in terms of MUF-T, the decomposition temperature of urea-formaldehyde was postponed to 244 °C, which means that the pyrolysis strategy needs to choose a temperature higher than 244 °C. The volatiles in MUF-T are more easily converted to bio-gas or bio-oil than those in MUF. However, only CH₄ was observed in the bio-gas generated of MUF-T at 220 °C, indicating that titanium did not catalyze the fracture of oxygen-containing functional groups at low temperatures. Titanium condensed at 550 °C, and the utilization of bio-char may face a problem of titanium particle shedding.

Increasing the hydrophyte removal rate of dissolved inorganic phosphorus using a novel Fe-Mg-loaded activated carbon hydroponic substrate with adsorption-release dual functions

At present, the plant floating bed is mostly used to remediate aquaculture tail water since its obvious advantage of eco-friendly. However, there is still the problem of low phosphorus removal efficiency due to the balance between the floating bed coverage area and the aquaculture area, as well as the phosphorus content fluctuation in water. To solve this problem, a phosphorus-controlling hydroponic substrate prepared from granular activated carbon loaded with nanoiron-magnesium hydroxide (AC-Fe-Mg) was prepared, and the phosphorus adsorption and slow-release performance of AC-Fe-Mg were evaluated. Moreover, the effect of the combination of AC-Fe-Mg and I. pseudacorus L. on phosphorus purification was studied. AC-Fe-Mg exhibited superior adsorption and release ability for phosphorus without substantial interference from coexisting substances such as Cl^-, NO₃^-, HCO₃^- and humic acid (HA) within the pH range of 5-9. Finally, the phosphorus removal rate reached 98.66% under the combined effect of I. pseudacorus L. and AC-Fe-Mg at the initial P concentration of 20 mg L^-1. At a high P-level, phosphorus was sequestered by AC-Fe-Mg and consumed as a growth nutrient by I. pseudacorus L. At a low P-level, phosphorus was released from AC-Fe-Mg and provided to I. pseudacorus L. The regulatory ability of AC-Fe-Mg can provide plants with continuous and stable phosphorus, and maintain the nitrogen-phosphorus ratio for plant demand. Thus, the dissolved inorganic phosphorus was controlled and efficiently removed. Accordingly, the novel AC-Fe-Mg with adsorption and slow-release dual functions can be used as a hydroponic substrate of emergent plants to improve water purification.

High-efficiency capture and removal of phosphate from wastewater by 3D hierarchical functional biomass-derived carbon aerogel

The development of functional biomass-based carbon aerogels (CAs) with excellent mechanical flexibility and ultra-high phosphate capture capacity is crucial for capture and recovery of phosphate from waste water. Herein, a functional biomass-derived CA (MgO@SL/CMC CA) with an ordered wave-shaped layered structure and excellent compressibility was fabricated with the aim of creating a material with efficient phosphate capture performance. The incorporation of sulfonomethylated lignin (SL) significantly improves the mechanical flexibility of MgO@SL/CMC CA. Numerous MgO nano-particles (NPs), which act as principal adsorption sites, were uniformly anchored on the MgO@SL/CMC CA. The prepared MgO@SL/CMC CA with high Mg content (20.34 wt%) exhibited an ultra-high phosphate capture capacity (218.51 mg P g^-1 for adsorbent or 644.58 mg P g^-1 for MgO), excellent adsorptive selectivity for phosphate and a wide pH range of application (2-8). Notably, more than 81.95% of the phosphate capture capacity was retained after six cyclic adsorption-desorption tests. A considerable effective treatment volume (468 BV) of actual wastewater (1.7 mg P L^-1) could be achieved by the MgO@SL/CMC CA in the fixed-bed adsorption column. Research into the adsorption mechanism reveals that monolayer chemisorption of phosphate occurs on the MgO@SL/CMC CA through a ligand exchange process. The combination of favorable flexibility, green raw materials and superior phosphate capture performance endows MgO@SL/CMC CA with great application potential in the practical treatment of wastewater.

Three-dimensional graphene/La(OH)3-nanorod aerogel adsorbent by self-assembly process for enhanced removal and recovery of phosphate in wastewater

Removal and recovery of phosphorus (P) from wastewater is beneficial to both environmental protection and resource sustainability. Enriching the low concentration of P in wastewater will greatly facilitate the effective recovery of P. To enhance the adsorption performance and recyclability of adsorbents for low concentration P-containing wastewater, a novel three-dimensional (3D) graphene/La(OH)₃-nanorod aerogel (GLA) was prepared by a unique self-assembly process in this study. Benefiting from the large specific surface area of graphene aerogel, which provides sufficient loading sites for the favorable dispersion of La(OH)₃ nanorods, the GLA achieves an excellent P adsorption capacity of 76.85 mg/g. It is also highly selective for P, with adsorption capacity reduced by only 14% and 11% under the interference of high concentration of dissolved organic matter or multiple competing anions respectively. Further mechanistic investigation revealed that the whole adsorption process consists of three stages: (1) ion-exchange process; (2) LaP inter-sphere coordination process; and (3) crystal evolution process. In the continuous flow adsorption-desorption cycles, the P concentration was concentrated ~25 times that of the feeding water (2 mg P/L). To our knowledge, this is the first time that La-modified graphene aerogel has been studied for P recovery. This provides a new method for the P removal and recovery of low concentration P-containing wastewater.

Cerium-doped MIL-101-NH2(Fe) as superior adsorbent for simultaneous capture of phosphate and As(V) from Yangzonghai coastal spring water

A series of novel cerium-doped MIL-101-NH₂ materials were synthesized using the solvothermal method for the simultaneous efficient removal of phosphate and As(V). According to the characterization results, cerium was successfully loaded onto MIL-101-NH₂ and that Ce-MOFs might be generated during the loading process, which modified the crystal structure of MIL-101-NH₂ and resulted in MOFs with different microstructures. In single-uptake systems containing only phosphate or As(V), isothermal adsorption experiments showed that 1Ce-MIL-101-NH₂ exhibited better adsorption properties of phosphate and As(V) than MIL-101-NH₂. Furthermore, the uptake amounts of phosphate and As(V) reached 341.5 mg/g and 249 mg/g, respectively. Superior uptake amounts for binary phosphate (167.36 mg/g) and As(V) (87.55 mg/g) were achieved with 1Ce-MIL-101-NH₂. Kinetic experiments revealed a higher uptake rate of phosphate than of As(V). FT-IR and XPS analyses showed that the main mechanism for the removal of phosphate and As(V) from water by 1Ce-MIL-101-NH₂ was the formation of an Fe/CeOP inner complex through ligand complexation and electrostatic attraction. Furthermore, 1Ce-MIL-101-NH₂ exhibited high selectivity and excellent efficiency in removing phosphate and As(V) in contaminated spring water in the presence of competing anions; this further confirms the application potential of the novel adsorbent.

Removed heavy metal ions from wastewater reuse for chemiluminescence: Successive application of lignin-based composite hydrogels

The novel sulfomethylated lignin-grafted-polyacrylic acid (SL-g-PAA) hydrogel was fabricated in this work via a facile and green synthetic strategy for the efficient removal of heavy metal ions from wastewater, and then successively reused for chemiluminescence (CL). The sulfomethylation of lignin was first performed to improve its water solubility and introduce numerous active sites for adsorption of heavy metal ions. The as-synthesized SL-g-PAA hydrogel with high content of lignin exhibited the highly efficient and rapid removal of various metal ions from simulated wastewater. More importantly, the spent hydrogel (M²⁺@SL-g-PAA) after adsorption was reused for the first time to develop a new CL system by an ingenious strategy, in which these metal ions adsorbed on M²⁺@SL-g-PAA act as heterogeneous catalytic sites to catalyze the CL reaction between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and H₂O₂. The resultant CL system displayed high CL intensity and long duration time, which could be observed by naked eye in the dark and lasted for > 24 h. The combination of facile fabrication process, renewable raw materials, and ingenious strategy for successive application in adsorption and CL endows this lignin-based composite hydrogel with a great potential for application in wastewater treatment, biological imaging and cold light sources.

Carbonaceous materials for removal and recovery of phosphate species: Limitations, successes and future improvement

The carbonaceous materials have gained significant interest for the phosphorus species remediation and recovery in the last decade. Carbonaceous materials present many unique features, such as cost effective, availability, environmentally friendly, and high removal efficiency that make them a promising adsorbent. In this review, the recent application of carbonaceous materials including activated carbon (AC), graphene and graphene oxide (GO), lignin, carbon nanotubes (CNTs), and gC₃N₄ for phosphate removal and recovery were comprehensively summarized. The kinetics and isotherm models, removal mechanisms, and effects of operating parameters are reported. The reusability, lifetime of carbonaceous materials, and impact of modification were also considered. The modified carbonaceous materials have significantly high phosphate adsorption capacity compared to unmodified adsorbents. Namely, MgO-functionalized lignin-based bio-charcoal exhibited a 906.8 mg g^-1 of capacity as the highest one among other reviewed materials. The modification of carbonaceous materials with various elements has been presented to improve the surface functional groups, surface area and charge, and pore volume and size. Among these loaded elements, iron has been effectively used to provide a prospect for magnetic recovery of the adsorbent as well as increase phosphate adsorption. Furthermore, the phosphate recovery methods, phosphate removal efficiency of carbonaceous materials, the limitations, important gaps in the literature, and future studies to enhance applicability of carbonaceous materials in real scale are also discussed.

Computational study of the interaction of heavy metal ions, Cd(II), Hg(II), and Pb(II) on lignin matrices

Contamination by heavy metal ions, particularly in water resources, is a severe environmental problem. In this study, the interaction of metal ions, namely, Cadmium Cd(II), Mercury Hg(II), and Lead Pb(II), on lignin matrices was investigated based on theoretical calculations. Binding energy (ΔE_Bind) values proved that the Pb(II) interacted better with lignin matrices than Cd(II) or Hg(II), having energy values between -8.4 kcal mol^-1 to -20.2 kcal mol^-1. The Gibbs energy (ΔG) and enthalpy (ΔH) values for Pb(II) were <0, indicating that the process was spontaneous and released heat. However, the lignin matrices studied in this work did not interact efficiently with Cd(II) and Hg(II) ions because almost all ΔE_Bind, ΔG, and ΔH values were positive. The bond length of the interaction proved that the Pb ions yielded the smallest values, ratifying the values for the interaction energy. Analyses based on the quantum theory of atoms in molecules showed that the interactions between Pb(II) and the matrices were partially covalent, whereas the interactions of Cd(II) and Hg(II) were predominantly electrostatic, justifying the positive values of ΔE_Bind, ΔG, and ΔH. The natural bond orbital results showed that the ligand orbitals of the matrix interacted with the lone pair antibonding orbital (LP*) of the metal ions. The theoretical results of the study show the possibility of applying lignin to remove heavy metal ions, especially Pb, and providing information for research related to wastewater treatment.

Regenerable magnetic aminated lignin/Fe3O4/La(OH)3 adsorbents for the effective removal of phosphate and glyphosate

Phosphates and organophosphorus cause environmental pollution, and excessive phosphate leads to water eutrophication. Glyphosate, an organophosphorus herbicide, harms the environment and human health. In this study, regenerable magnetic AL/Fe₃O₄/La(OH)₃ adsorbents were developed by modifying Fe₃O₄ and La(OH)₃ on aminated lignin (AL) for phosphate and glyphosate removal. The adsorption capacity for phosphate and glyphosate reached 60.36 mg g^-1 and 83.87 mg g^-1 when the initial concentrations were 150 mg L^-1 and 250 mg L^-1, respectively. The thermodynamic data showed that adsorption is a spontaneous and endothermic process. Adsorption can be applied at pH values ranging from 3 to 11 and is more suitable under acidic conditions. Fe₃O₄ and La(OH)₃ both enhanced the adsorption capacities of phosphate and glyphosate. Phosphate and glyphosate compete slightly when coexisting in the adsorption process at low concentrations. Due to the magnetic properties of Fe₃O₄, the adsorbents can be separated rapidly and effectively with an external magnetic field. 89% adsorption capacity remained after four adsorption-desorption recycles. Thus, AL/Fe₃O₄/La(OH)₃ shows potential for phosphate and glyphosate removal as an effective and reusable adsorbent.

Recent advances and challenges on removal and recycling of phosphate from wastewater using biomass-derived adsorbents

As the severe damage of phosphate enrichment in the water ecosystem and the supply shortage of phosphate rock, developing an efficient method for the removal and recycling of phosphate from wastewater is of great significance. To achieve this goal, adsorption technology has been widely investigated, and various adsorbents were developed. Among them, the biomass-derived adsorbents including biomass-derived carbon-based materials, biomass-based anion exchangers and metal-biomass composites have attracted increasing attention over the past years due to the low cost, abundant renewable raw materials and environmental friendliness. However, different adsorbents usually exhibit variable adsorption performances for phosphate, which highly depends on their design strategies, preparation methods and potential adsorption mechanisms. Thus, this review comprehensively summarizes the recent researches on the removal and recycling of phosphate from wastewater using the biomass-derived adsorbents. Especially, the design strategies, preparation methods, adsorption performances and mechanisms of these reported biomass-derived adsorbents are discussed in detail. Moreover, as the significant strategies to recover and recycling phosphate, the elution and direct use of phosphate-loaded adsorbents as fertilizers are also presented. Although the excellent adsorption performance has been obtained, some challenges are still existing, which should be given more attention in the following researches to facilitate the development and industrial application of biomass-derived adsorbents.

Efficient recovery of phosphate from simulated urine by Mg/Fe bimetallic oxide modified biochar as a potential resource

The massive use of phosphate fertilizers in agriculture is costly and induces water pollution, calling for more sustainable phosphate sources in the context of the circular economy. Here we prepared a new adsorbent based on waste straw biochar modified with the Mg/Fe bimetallic oxide, namely the Mg/Fe biochar, to recover phosphate from the simulated urine as an possible phosphate fertilizer. About 90% phosphate was recovered from the simulated urine with a wide pH range of 3.0-9.0 and a maximum adsorption capacity of 206.2 mg/g, using 1 g/L of Mg/Fe modified biochar. A pseudo second-order kinetics and Sips model were proposed to fit the experimental data well, suggesting that the adsorption was controlled by physical and chemical processes, which is driven by electrostatic attraction, intra-particle diffusion, ion exchange and surface ligand exchange. Overall, the Mg/Fe biochar is renewable and can recover more than 70% of phosphate in the simulated urine after 5 cycles of reuse, which appears as a safe and efficient adsorbent to recycle phosphate from urine.

Phosphate Adsorption from Aqueous Solution Using Electrospun Cellulose Acetate Nanofiber Membrane Modified with Graphene Oxide/Sodium Dodecyl Sulphate

Eutrophication and water pollution caused by a high concentration of phosphate are two concerning issues that affect water quality worldwide. A novel cellulose-based adsorbent, cellulose acetate/graphene oxide/sodium dodecyl sulphate (CA/GO/SDS), was developed for water treatment. A 13% CA solution in a mixture of acetone:dimethylacetamide (2:1) has been electrospun and complexed with a GO/SDS solution. The field emission scanning electron microscope (FESEM) showed that the CA membrane was pure white, while the CA/GO/SDS membrane was not as white as CA and its colour became darker as the GO content increased. The process of phosphate removal from the solutions was found to be aided by the hydroxyl groups on the surface of the CA modified with GO/SDS, as shown by infrared spectroscopy. An optimization condition for the adsorption process was studied by varying pH, immersion time, and the mass of the membrane. The experimental results from phosphate adsorption showed that CA/GO/SDS had an excellent pH adaptability, with an optimum pH of 7, and maximum removal (>87.0%) was observed with a membrane mass of 0.05 g at an initial concentration of 25 mg L^-1. A kinetic study revealed that 180 min of contact time could adsorb about 87.2% of phosphate onto the CA/GO/SDS membrane. A typical pseudo-second-order kinetic model successfully portrayed the kinetic sorption of phosphate, and the adsorption equilibrium data were well-correlated with the Langmuir adsorption model, suggesting the monolayer coverage of adsorbed molecules.

Multifunctional Lignin-Based Composite Materials for Emerging Applications

Lignin exhibited numerous advantages such as plentiful functional groups, good biocompatibility, low toxicity, and high carbon content, which can be transformed into composites and carbon materials. Lignin-based materials are usually environmentally friendly and low cost, and are widely used in energy storage, environment, electronic devices, and other fields. In this review article, the pretreatment separation methods like hydrothermal process are illustrated briefly, and the properties and categories of technical lignin are introduced. Then, the latest progress of lignin-based composites and lignin-derived carbon materials is summarized. Finally, the current challenges and future developments were suggested based on our knowledge. It is expected that this review paper favored the applications of composites and lignin-derived carbon materials in the future.

Nitrogen-doped lignin-derived biochar with enriched loading of CeO2 nanoparticles for highly efficient and rapid phosphate capture

Development of lignin-derived carbon adsorbents with ultrahigh phosphate adsorption activity and rapid adsorption kinetics is of great importance, yet limited success has been achieved. Herein, we develop a CeO₂ functionalized N-doped lignin-derived biochar (Ce@NLC) via a cooperative modification strategy for effective and fast phosphate capture. The novel modification strategy not only contributes greatly to the loading of well-dispersed CeO₂ nanoparticles with a smaller size, but also significantly increases the relative concentration of Ce(III) species on Ce@NLC. Consequently, an enhanced capture capacity for phosphate (196.85 mg g^-1) as well as extremely rapid adsorption kinetics were achieved in a wide operating pH range (2-10). Interestingly, Ce@NLC exhibited a strong phosphate adsorption activity at even low-concentration phosphorus-containing water. The removal efficiency and final P concentration reached 99.87% and 2.59 μg P L^-1 within 1 min at the phosphate concentration of 2 mg P L^-1. Experiments and characterization indicated that Ce(III) species plays a predominant role for the phosphate capture, and ligand exchange, together with electrostatic attraction, are the main adsorption mechanism. This work develops not only an efficient carbon-based adsorbent for phosphate capture, but also promotes the high-value application of industrial lignin.