Study of a stream in Argentina with a high concentration of microplastics: Preliminary analysis of the methodology

Practical guidelines and challenges in the isolation and characterization of microplastics/microfibers by Raman microscopy

We address some challenges usually encountered in the analysis of microplastics (MPs) and microfibers (MFs) using Raman microscopy. Those issues are examined considering that the researchers that carry out the collection and analysis of MP contamination may not have necessarily specialized expertise in Raman microscopy or polymer chemistry. Topics such as effective particle isolation or the use of adequate substrates are approached on the base of the impact they have on the spectroscopic characterization. Issues as the control of background signal, the influence of sample digestion, and the presence of internal interferences such as pigments, dyes, and fillers, are discussed. Spectral features of the polymer families found as MP/MF contaminants are presented based upon polymer structure, properties, and applications. The use of open-source libraries to complement chemical identification is also discussed. Overall, this work aims to enhance the practice and understanding of Raman microscopy for researchers engaged in characterizing MP/MF contaminants.

Effects of food quantity on the ingestion and egestion of MPs with different colors by Daphnia magna

Aquatic organism uptake and accumulate microplastics (MPs) through various pathways, with ingestion alongside food being one of the primary routes. However, the impact of food concentration on the accumulation of different types of MPs, particularly across various colors, remains largely unexplored. To address this gap, we selected Daphnia magna as a model organism to study the ingestion/egestion kinetics and the preference for different MP colors under varying concentrations of Chlorella vulgaris. Our findings revealed that as the concentration of Chlorella increased, the ingestion of MPs by D. magna initially increased and then showed a decline. During the egestion phase within clean medium without further food supply, an increase in food concentration during the ingestion phase led to a slower rate of MP discharge; while when food was present during the egestion phase, the discharge rate accelerated for all treatments, indicating the importance of food ingestion/digestion process on the MPs bioaccumulation. Furthermore, in the presence of phytoplankton, D. magna demonstrated a preference for ingesting green-colored MPs, especially at low and medium level Chlorella supply, possibly due to the enhanced food searching activities. Beyond gut passage, we also examined the attachment of MPs to the organism's body surface, finding that the number of adhered MPs increased with increasing food concentration, likely due to the intensified filtering current during food ingestion. In summary, this study demonstrated that under aquatic environment with increasing phytoplankton concentrations, the ingestion and egestion rates, color preferences, as well as surface adherence of MPs to filter feeding zooplanktons will be significantly influenced, which may further pose ecological risks. Our results offer novel insights into the unintentional accumulation of MPs by zooplankton, highlighting the complex interactions between food availability and MPs accumulation dynamics.

Temporal variation of the microplastic concentration in a stream that receives discharge from wastewater treatment plants

The temporal variation of the microplastic concentration was studied in the Langueyú stream, which is located in the department of Tandil, in the southeast of the Buenos Aires province in Argentina. This stream receives discharge from the wastewater treatment plants from a medium-sized city. A quantitative analysis of the microplastic concentration was carried out in different samplings, corresponding to different seasons. The study focused on the most contaminated point, located after the discharge of effluents from plants. Higher concentrations of MPs were found in winter (dry season), having approximately 6 times the concentrations found in summer and autumn (wet seasons). However, these differences would not be a direct consequence of the amount precipitation, but rather would be associated with a seasonal variation of human activities, mainly with respect to the type of clothing used in the cold season. The microfibers correspond to around 60-90% of microplastics found. The discharge from the plants causes changes in the parameters of the stream water, such as high electrical conductivity values, and also provide metallic contaminants such as Ca, Zn, and in smaller amounts Pb, Fe, Ni and Cu, which were found adhered to the microplastics and remain in the stream water in high quantities 3 km after the study point. The microplastic concentration presents a linear empirical correlation with the conductivity, and it was found that conductivity measurements would serve as an indicator of the microplastic concentration in the system under study.

Abundance, characterization, and removal of microplastics in different technology-based sewage treatment plants discharging into the middle stretch of the Ganga River, India

Sewage treatment plants (STPs) are considered as a prominent source for releasing microplastics (MPs) into the riverine systems. Though MPs abundance and removal efficacy in different secondary treatment technique-based STPs have been extensively studied worldwide, such studies are scarce in Indian conditions. Herein, this study comprehensively assesses MPs abundance, characterization, and their removal in the selected secondary treatment technique-based STPs discharging into the middle stretch of the Ganga River in India. MPs concentration (n/L) in influent and effluent of the STPs varied between 42 ± 10 to 150 ± 19 and 3 ± 1 to 22 ± 5, respectively. Overall, the primary treatment stage was observed to remove MPs by 23-42 %, while the secondary treatment stage removed MPs by 67-90 %. Selected technique-based STPs exhibited varying MPs removal efficacies as follows: SBR (94 %), TF (90 %), AL (88 %), UASB (87 %), ASP (85 %), FAB (84 %), and Bio-tower (77 %). MPs ranging from 50 to 250 μm were the dominant sizes, with PP, PE, and PS being the prevalent polymers. The Ganga River receives about 3 × 108 MPs/day from STP effluents, and an estimated 4.5 × 107 MPs/day are released via the sludge. This comprehensive assessment of MPs abundance and removal from different technology-based Indian STPs will allow the comparison of the generated dataset with similar studies worldwide.

Microplastics and co-pollutant with ciprofloxacin affect interactions between free-floating macrophytes

Microplastic and antibiotic contamination are considered an increasing environmental problem in aquatic systems, while little is known about the impact of microplastics and co-pollutant with antibiotics on freshwater vascular plants, particularly the effects of interactions between macrophytes. Here, we performed a mesocosm experiment to evaluate the impact of polyethylene-microplastics and their co-pollutants with ciprofloxacin on the growth and physiological characteristics of Spirodela polyrhiza and Lemna minor and the interactions between these two macrophytes. Our results showed that microplastics alone cannot significantly influence fresh weight and specific leaf area of the two test free-floating macrophytes, but the effects on photosynthetic pigments, malondialdehyde, catalase and soluble sugar contents were species-specific. Ciprofloxacin can significant adverse effects on the growth and physiological traits of the two test macrophytes and microplastic mitigated the toxicity of ciprofloxacin on the two free-floating plants to a certain extent. In addition, our studies showed that microplastics and co-pollutants can influence relative yield and competitiveness of S. polyrhiza and L. minor by directly or indirectly influencing their physiology and growth. Therefore our findings suggest that species-specific sensibility to microplastic and its co-pollutant among free-floating macrophytes may influence macrophyte population dynamics and thereby community structure and ecosystem functioning. And microplastics altered other contaminant behaviours and toxicity, and may directly or indirectly influence macrophytes interactions and community structure. The present study is the first experimental study exploring the effects of microplastics alone and with their co-pollutants on interactions between free-floating macrophytes, which can provide basic theoretical guidance for improving the stability of freshwater ecosystems.

Distribution of microplastics present in a stream that receives discharge from wastewater treatment plants

The presence of microplastics (MPs) in freshwater systems that receive discharge of urban effluent implies a great environmental impact. In order to be able to generate proposals that solve this problem, it is necessary to know in detail the contributions of different MPs sources. The aim of this work was to study the contribution of urban sewage discharge to MPs pollution in a stream that runs through a medium-sized city. The spatial distribution of MPs with sizes between 100 μm and 1.5 mm present in surface water was measured and their characteristics, dimensions, shapes and identification were determined. Physical-chemical parameters of the stream water were measured, and a decrease in water quality was found due to wastewater treatment plants. The main source of MPs was effluent from the plants (97% of the total MPs), while the rest came from storm drains and discharge of tributaries. The maximum concentration of MPs found was around 72,000 MP/L (equivalent to 53 million MPs/s), at a point after discharge from both plants. Around 70% of MPs correspond to microfibers with a mean length of around 300 μm and a mean width of around 15 μm, and they are mainly polyethylene fibers. The remaining 30% of MPs are particles with lengths of around 140 μm. The transport of MPs between a point located after discharge of the plants and another point located about 3 km further on was studied, and no significant variation was found in the concentration of MPs. Electrical conductivity was used as a conservative tracer of MPs concentration. This work presents for the first time a detailed analysis of different contributions of MPs to a freshwater system in South America, which receives discharge of wastewater treatment plants, evidencing its important role in pollution.

Laser induced breakdown spectroscopy (LIBS) as a technique to detect copper in plastic and microplastic waste

Plastic waste is an environmental problematic, not only because of its own contamination, but also because it can act as a vector for other pollutants, particularly metals. In this work, taking advantage of the sensitivity of the LIBS technique, the presence of copper in plastics and microplastics present in a stream that receives effluents from a medium-sized city was determined. The influence of the digestion process on the collected samples was analyzed. On the other hand, copper retention in commonly used plastics submerged in stream water and in a solution prepared in the laboratory was analyzed. This study confirms that both macroplastics and microplastics collected from a stream that receives effluents from a city, can retain copper.

Microplastics in soil and freshwater: Understanding sources, distribution, potential impacts, and regulations for management

Plastic debris is a complex and persistent environmental contaminant that has received a high amount of attention in the last few years. Understanding the sources, transport, fate, occurrence, and health risks of microplastics (MPs) in the environment is essential as millions of tons of plastic are manufactured and released into the environment. There is a high possibility that MPs will accumulate and retain within continental environments and have effects on the environment and human health. This review elucidates the outcomes of studies related to the prevalence, transport, fate, and health risks of MPs in soil and freshwater environments. The review shows that the sources of MPs are diverse and extensive and their occurrence, transport, fate, and health risks in the environment are affected by their physico-chemical characteristics and by natural factors. Implemented legislation or regulatory plans to reduce MPs contamination of the environment have been reviewed in this study. Moreover, management options are presented.

Microplastics in Latin America and the Caribbean: A review on current status and perspectives

A literature review was carried out to analyze the current status of microplastic research in Latin America and the Caribbean (LAC). Specifically, this work focused on publications pertaining to (1) occurrence and distribution of microplastics in the environment, including water, sediments, and soil and (2) the environmental impact of MPs, particularly their presence and effects on aquatic and terrestrial organisms. The review included peer-reviewed articles from Scopus, Science Direct, Web of Science, Google Scholar and two iberoamerican open access databases (Redalyc and SciELO). It was found that LAC has only contributed to 5% of the global scientific output on microplastics, and overall the highest contributor within the region was Brazil (52%), followed by Chile (16%) and Mexico (13%). An additional section analyzing the barriers to conducting microplastic research in LAC and their exacerbation by the current COVID-19 pandemic was included to provide additional context behind the relatively low scientific production and improve recommendations encouraging research in this region.

Binational survey of personal protective equipment (PPE) pollution driven by the COVID-19 pandemic in coastal environments: Abundance, distribution, and analytical characterization

In the present contribution, two nationwide surveys of personal protective equipment (PPE) pollution were conducted in Peru and Argentina aiming to provide valuable information regarding the abundance and distribution of PPE in coastal sites. Additionally, PPE items were recovered from the environment and analyzed by Fourier transformed infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM) with Energy dispersive X-ray (EDX), and X-ray diffraction (XRD), and compared to brand-new PPE in order to investigate the chemical and structural degradation of PPE in the environment. PPE density (PPE m^-2) found in both countries were comparable to previous studies. FTIR analysis revealed multiple polymer types comprising common PPE, mainly polypropylene, polyamide, polyethylene terephthalate, and polyester. SEM micrographs showed clear weathering signs, such as cracks, cavities, and rough surfaces in face masks and gloves. EDX elemental mapping revealed the presence of elemental additives, such as Ca in gloves and face masks and AgNPs as an antimicrobial agent. Other metals found on the surface of PPE were Mo, P, Ti, and Zn. XRD patterns displayed a notorious decrease in the crystallinity of polypropylene face masks, which could alter its interaction with external contaminants and stability. The next steps in this line of research were discussed.

Continental microplastics: Presence, features, and environmental transport pathways

Microplastics (MPs) are ubiquitous contaminants of great concern for the environment. MPs' presence and concentration in the air, soil, marine, and freshwater environments have been reported as a matter of priority in recent years. This review addresses the current knowledge of the main pathways of MPs in air, soil, and freshwater reservoirs in order to provide an integrated understanding of their behaviors in the continental environment. Therefore, MPs' occurrence (as particle counts), sources, and how their features as shape, size, polymer composition, and density could influence their transport and final sink were discussed. Wind resuspension and atmospheric fallout, groundwater migration, runoff from catchments, and water flow from rivers and effluents were pointed as the principal pathways. MPs' size, shape, polymer composition, and density interact with environmental variables as soil structure and composition, precipitation, wind, relative humidity, water temperature, and salinity. Sampling designs for MPs research should further consider soil characteristics, climate variability and extreme events, time lag and grasshopper effects, morphological and hydrological features of aquatic systems, and water currents, among others. Furthermore, long-term monitoring and lab experiments are still needed to understand MPs' behavior in the environment. This information will provide a unified understanding of the continental MPs pathways, including the key main findings, knowledge gaps, and future challenges to understand this emerging contaminant.

Plastisphere in freshwaters: An emerging concern

Plastisphere, an ecosystem of microbes thriving on floating plastic debris, has been extensively studied in marine waters since 2013. Currently, very little is known about the freshwater plastisphere. This review seeks to provide a broad insight into the freshwater science of plastisphere in the light of marine plastisphere, including research gaps, suggestions, and rising concerns, which would be of interest to the public, policymakers, and stakeholders. Given that freshwaters are endangered ecosystems, it is imperative to understand the role and impact of plastisphere on freshwaters. Plastic debris, especially microplastics (size <5 mm) in freshwater ecosystems, provide a stable, persistent, and buoyant substrate for microbes. Although current evidence suggests that freshwater environmental conditions and microplastics' physical and chemical properties significantly influence microbial colonisation, its role and integration in the aquatic ecosystems are unknown. Considering that the plastisphere biodiversity is unique, we seek to establish why and how many species co-exist in the plastisphere. Evaluating such fundamental questions should advance our basic understanding of the resilience of plastisphere to the changing environment. Plastisphere microbes, including the pathogenic bacteria, were found in both systems demonstrating their ability to survive on the plastic fragments from one ecosystem to another. A significant concern regarding plastisphere is the potential freshwater dispersal of anthropogenic pollutants and invasive or pathogenic species. Notably, microplastics aggregates may serve as a food source for grazers, which opens the question of the extent to which it can impact freshwater food webs. To gain a thorough understanding of the interplay between microplastics and the biogeochemical cycle, further insight into plastisphere microbes' functional role is needed. This would shed light on the unconsidered freshwater elemental cycling pathways. Given the complexity and universal nature of the plastisphere, strong interdisciplinary global research initiatives or networks are required to address the emerging concerns of plastisphere in freshwaters.

Occurrence, distribution, and characterization of suspended microplastics in a highly impacted estuarine wetland in Argentina

Microplastics have been a global concern due to their potential and widespread risks to organisms and environments. In this study, we investigated the abundance, distribution, and characteristics of microplastics (MPs) in the surface waters of the Bahía Blanca Estuary (BBE), specifically in its inner and middle zone. The results showed the dominant shape of MPs were fibers, being black, transparent, and blue the main colors. The concentrations of MPs ranged from 182 to 33,373 items m^-3 with a mean value of 6162 items m^-3. The highest concentrations of MPs were detected in the middle zone of the estuary, a site that receives untreated sewage effluents from the city. The most abundant size ranges were from 0.5 to 1.5 mm (44.21%) and ˂0.5 mm (40.21%) and were predominant at all the sampling sites. The concentration of mesoplastics in the inner zone (16 items m^-3) presented larger values than in the middle zone (5 items m^-3). A wide variety of polymeric materials with predominance of microfibers such as cellulose-based, polyacrylonitrile, polyethylene terephthalate, and polypropylene were identified. Polyester/alkyd resins and poli(vinyl chloride) were also found. The analysis of MPs surface through SEM/EDX detected a variety of elements such as C, O, Si, Al, K, Ca, Cl, Ti, Fe, S, and P, indicating potential contaminant carriers in the water column. Some plastic particles presented a high degree of degradation on their surface morphology. Untreated sewage discharges appear to be a significant input of MPs. Therefore, the results provided in the present study should be considered by stakeholders interested in the management and conservation of this large coastal wetland with significant ecological and economic value.