Lignite, thermally-modified and Ca/Mg-modified lignite for phosphate remediation

Exploring the environmental pathways and challenges of fluoroquinolone antibiotics: A state-of-the-art review

Fluoroquinolone (FQ) antibiotics have become a subject of growing concern due to their increasing presence in the environment, particularly in the soil and groundwater. This review provides a comprehensive examination of the attributes, prevalence, ecotoxicity, and remediation approaches associated with FQs in environmental matrices. The paper discusses the physicochemical properties that influence the fate and transport of FQs in soil and groundwater, exploring the factors contributing to their prevalence in these environments. Furthermore, the ecotoxicological implications of FQ contamination in soil and aquatic ecosystems are reviewed, shedding light on the potential risks to environmental and human health. The latter part of the review is dedicated to an extensive analysis of remediation approaches, encompassing both in-situ and ex-situ methods employed to mitigate FQ contamination. The critical evaluation of these remediation strategies provides insights into their efficacy, limitations, and environmental implications. In this investigation, a correlation between FQ antibiotics and climate change is established, underlining its significance in addressing the Sustainable Development Goals (SDGs). The study further identifies and delineates multiple research gaps, proposing them as key areas for future investigational directions. Overall, this review aims to consolidate current knowledge on FQs in soil and groundwater, offering a valuable resource for researchers, policymakers, and practitioners engaged in environmental management and public health.

Recovery of ammonia nitrogen and phosphate from livestock farm wastewater by iron-magnesium oxide coupled lignite and its potential for resource utilization

A new adsorbent called iron-magnesium oxide coupled lignite (CIMBC) was developed to address the challenges of recovering high concentrations of ammonia nitrogen and phosphate in livestock farm wastewater and improving the inefficient use of lignite (BC) with low calorific value. CIMBC was synthesized using the modified ferromagnesium salt double-coating method. The experiments demonstrated that Fe2O3 and MgO could be effectively loaded onto the surface of BC at a Fe/Mg molar ratio of 1:2 and pyrolysis temperature of 500 °C. The optimal conditions for adsorption were determined to be an N/P concentration ratio of 2:1, adsorbent dosage of 1 g/L, and pH of 7. The presence of coexisting cations (Ca2+ and Mg2+) inhibited the removal of ammonia nitrogen but enhanced the removal of phosphate. Likewise, the presence of coexisting anions (CO32- and SO42-) hindered the removal of both ammonia nitrogen and phosphate. The adsorption behavior followed the pseudo-second-order model and the Langmuir model, with a maximum adsorption capacity of 95.69 mg N/g for ammonia nitrogen and 101.32 mg P/g for phosphate. The adsorption process was a spontaneous endothermic process controlled by multiple levels. The main mechanisms of adsorption involved electrostatic attraction, intra-particle diffusion, ion exchange, chemical precipitation, and coordination exchange. After 5 times of adsorption-desorption, the recovery rate of CIMBC is less than 50%, and the removal rate of phosphate is less than 40%. Although the RCIMBC exhibited low reusability, but also it showed potential in removing heavy metals (Pb) from wastewater and for use as a slow-release fertilizer. CIMBC is a promising new adsorbent, which can realize resource utilization of lignite with low calorific value while removing nitrogen and phosphorus.

Ultrahigh-porosity Ranunculus-like MgO adsorbent coupled with predictive deep belief networks: A transformative method for phosphorus treatment

Phosphorus is a nonrenewable material with a finite supply on Earth; however, due to the rapid growth of the manufacturing industry, phosphorus contamination has become a global concern. Therefore, this study highlights the remarkable potential of ranunculus-like MgO (MO4-MO6) as superior adsorbents for phosphate removal and recovery. Furthermore, MO6 stands out with an impressive adsorption capacity of 596.88 mg/g and a high efficacy across a wide pH range (2-10) under varying coexisting ion concentrations. MO6 outperforms the top current adsorbents for phosphate removal. The process follows Pseudo-second-order and Langmuir models, indicating chemical interactions between the phosphate species and homogeneous MO6 monolayer. MO6 maintains 80 % removal and 96 % recovery after five cycles and adheres to the WHO and EUWFD regulations for residual elements in water. FT-IR and XPS analyses further reveal the underlying mechanisms, including ion exchange, electrostatic, and acid-base interactions. Ten machine learning (ML) models were applied to simultaneously predict multi-criteria (sorption capacity, removal efficiency, final pH, and Mg leakage) affected by 15 diverse environmental conditions. Traditional ML models and deep neural networks have poor accuracy, particularly for removal efficiency. However, a breakthrough was achieved by the developed deep belief network (DBN) with unparalleled performance (MAE = 1.3289, RMSE = 5.2552, R2 = 0.9926) across all output features, surpassing all current studies using thousands of data points for only one output factor. These captivating MO6 and DBN models also have immense potential for effectively applying in the real water test with error < 5 %, opening immense horizons for transformative methods, particularly in phosphate removal and recovery.

Konjac glucomannan/pectin/Ca-Mg hydrogel with self-releasing alkalinity to recover phosphate in aqueous solution

The combination of polysaccharides can obtain stable, degradable, and environmentally friendly hydrogels, which have broad application prospects in adsorbents assembly. With Ca2+ and Mg2+ as crosslinkers, a new pectin/Konjac glucomannan/Ca-Mg composite hydrogel was prepared for phosphate adsorption by the alkali-thermal co-reaction method. Since Mg(OH)2 can create a suitable pH condition for phosphate adsorption by Ca, Ca and Mg synergistically promoted phosphate adsorption and remained stable in the pH range of 4 to 10. FTIR, SEM-EDS, XRD, XPS, and zero potential analysis corroborated that the hydrogel used Ca and Mg as active sites to trap pollutants by electrostatic adsorption and fix phosphate through complexation to form Mg3(PO4)2·8H2O and CaPO3(OH)2·H2O. Furthermore, it is unnecessary to separate the recovered phosphate from the hydrogel, and it can be used directly as a fertilizer. By being reused in the soil, it promoted seed germination and seedling growth. This adsorbent has the potential for recovery as a phosphorus-containing organic fertilizer after phosphorus adsorption.

Synthesis of calcium carbonate-loaded mesoporous SBA-15 nanocomposites for removal of phosphate from solution

Removal of phosphate from water is very crucial for protecting the ecological environment since massive phosphorus fertilizers have been widely used and caused serious water deterioration. Thus, we fabricated a series of calcium carbonate-loaded mesoporous SBA-15 nanocomposites with different Ca:Si molar ratio (CaAS-x) as phosphorus adsorbents via a simple wet-impregnation method. The multiply approaches including X-ray diffraction (XRD), N₂ physisorption, thermogravimetric mass spectrometry (TG-MS), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FT-IR) were used to characterize the structure, morphology, and composition of mesoporous CaAS-x nanocomposites. The phosphate adsorption efficiency of the CaAS-x nanocomposites was studied through adsorption and desorption batch tests. Results showed that the increases of Ca:Si molar ratio (rCa:Si) improved the phosphate removal capacity of CaAS nanocomposites, especially CaAS with the optimum synthesis molar ratio of Ca:Si as 0.55 showed the high adsorption capacity of 92.0 mg·g^-1 to high concentration of phosphate (> 200 mg·L^-1). Note that the CaAS-0.55 had a fast exponentially increased adsorption capacity with increasing the phosphate concentration and correspondingly showed a much faster phosphate removal rate than pristine CaCO₃. Apparently, mesoporous structure of SBA-15 contributed to high disperse of CaCO₃ nanoparticles leading to the monolayer chemical adsorption complexation formation of phosphate calcium (i.e., =SPO₄Ca, =CaHPO₄^-, and =CaPO₄Ca⁰). Therefore, mesoporous CaAS-0.55 nanocomposite is an environmental-friendly adsorbent for effective removal of high concentration of phosphate in neutral contaminated wastewater.

Effect of corn pre-puffing on the efficiency of MgO-engineered biochar for phosphorus recovery from livestock wastewater: mechanistic investigations and cost benefit analyses

To improve the phosphorus (P) recovery efficiency from livestock wastewater, a novel MgO doped mildewed corn biochar with thermal pre-puffing treatment (Mg-PBC) and without pre-puffing (Mg-BC) was synthesized and tested. The thermal-puffing pretreatment improved the effectiveness of metal soaking and MgO dispersion. P recovery time with Mg-PBC (7 h) was significantly shorter than that with Mg-BC (12 h). Moreover, Mg-PBC showed significantly higher P recovery capacity (241 mg g−1) than Mg-BC (96.6 mg g−1). P recovery capacity of the Mg-PBC fitted to the Thomas model was 90.7 mg g−1, which was 4 times higher than that of Mg-BC (22.9 mg g−1) under column test conditions. The mechanisms involved in P recovery included precipitation, surface complexation, and electrostatic interaction. After adsorption, both Mg-BC and Mg-PBC showed relatively low regeneration abilities. The P loaded Mg-BC (Mg-BC-P) and Mg-PBC (Mg-PBC-P), the later particularly, obviously increased the available P content and promoted plant growth. The release of P increased with time in the Mg-PBC-P treated soil, while it decreased with time in the P fertilizer treated soil. A cost–benefit analysis revealed that thermal-puffing pretreatment greatly increased the profit of MgO doped biochar from −0.66 to 5.90 US$ kg−1. These findings highlight that biomass pre-puffing is a feasible treatment to produce MgO modified biochar and to recover P from livestock wastewater, and that the Mg-PBC-P can be used as a slow-release P fertilizer.

Graphical Abstract

Novel oxymagnesite/green rust nanohybrids for selective removal and slow release of phosphate in water

The new paradigm in wastewater treatment demands to change traditional pollutants removal into resource recovery, especially for non-renewable P resources, effectively recovering phosphate from wastewater and reutilizing it as a nutrient is crucial to P sustainable utilization and P-related pollution control. The nanomaterial-based adsorption technology for P recovery from wastewater is becoming a research hotspot due to its high efficiency and selectivity. Herein, to recover aqueous phosphate, we developed novel oxymagnesite/green rust (OMGR) nanohybrids by a one-pot hydrothermal method. Green rust nanoparticles dispersed on the highly reactive oxymagnesite (MgO2MgCO₃) nanosheets could achieve efficient recovery and reuse of P. The volume ratio of water to ethylene glycol played an important role in the preparation of OMGR. The OMGR possessed an excellent selectivity of phosphate removal in the presence of multi-anions and wide pH adaptability in 4.0-10.0. The formation of MgP nanocrystals and the inner-sphere FeOP complexes via ligand exchange contributed to the selective removal of P by OMGR, and the removal capacity reached 141 mg P^.g^-1. The process of phosphate removal by OMGR was spontaneously endothermic and controlled by the intraparticle and boundary layer diffusion. Most importantly, the high bioavailable P (127 mg^.g^-1) of P-loaded OMGR had a persistent release behavior regulated by dissolution and diffusion, indicating that the P-loaded OMGR can act as a slow-release P-fertilizer. The findings provide a green and eco-friendly approach to realizing P resource recovery and reuse for phosphate-containing wastewaters.

Pilot-scale phosphate recovery from wastewater to create a fertiliser product: An integrated assessment of adsorbent performance and quality

Eutrophication and the predicted limited future availability of rock phosphate has triggered the increased development of phosphorus (P) recovery technologies, however, for remote regions, recovery solutions are still limited. Here, we report on a novel pilot-scale technology (FILTRAFLO^TM-P reactor) to recover phosphate (PO₄^3-) from wastewater effluent through a filtration/adsorption process in a rural setting. This unit employs enhanced gravitational filtration through adsorption media (here, a novel KOH deacetylated crab carapace based chitosan-calcite material (CCM)) with continuous self-backwashing. Trials were designed to assess how the FILTRAFLO^TM-P unit would operate under 'real' conditions (both at low and high PO₄^3- levels), and to ascertain the effectiveness of the adsorbent to recover phosphate from final effluent. High removal was achieved at low phosphate concentrations, bringing the residual effluent PO₄^3- level below 1 mg/L (EU limit for sensitive water bodies), while phosphate was efficiently harvested (at more than 50%) at higher PO₄^3- levels. Surface microprecipitation and inner-sphere complexation were postulated as the main PO₄^3- adsorption mechanisms through XRD, XPS and EDX elemental mapping. Further, a quality assessment of the P-enriched CCM (which could be used as a potential soil amendment) was undertaken to consider elemental composition, microbiological assessment and quantification of organic micropollutants. Quality analysis indicated ∼2.5% P₂O₅ present, trace levels (well below legislative limits) of heavy metals and extremely low levels of organic pollutants (e.g., PCBs, pharmaceuticals). No detectable levels of target bacterial pathogens were observed. Pot trials showed that ryegrass cultivated with the addition of the CCM adsorbent achieved higher plant dry matter and P concentration when compared to unfertilised controls, with a slow-release kinetic pattern. This study showed that CCM used with the FILTRAFLO^TM-P pilot reactor has high potential to recover phosphate from effluents and encourage resource recovery via bio-based management of waste.

Resource utilization of rice husk biomass: Preparation of MgO flake-modified biochar for simultaneous removal of heavy metals from aqueous solution and polluted soil

In general, the remediation performance of heavy metals can be further improved by metal-oxide modified biochar. This work used MgO-modified rice husk biochar (MgO-5%@RHB-450 and MgO-5%@RHB-600) with high surface activity for simultaneous remediation and removal of heavy metals in soil and wastewater. The adsorption of MgO-5%@RHB-450/MgO-5%@RHB-600 for Cd(II), Cu(II), Zn(II) and Cr(VI) followed the pseudo-second order, with the adsorption capacities reaching 91.13/104.68, 166.68/173.22, 80.12/104.38 and 38.88/47.02 mg g^-1, respectively. The addition of 1.0% MgO-5%@RHB-450 and MgO-5%@RHB-600 could effectively decrease the CaCl₂-extractable Cd concentration (CaCl₂-Cd) by 66.2% and 70.0%, respectively. Moreover, MgO-5%@RHB-450 and MgO-5%@RHB-600 facilitated the transformation of exchangeable fractions to carbonate-bound and residual fractions, and reduced the exchangeable fractions by 8.1% and 9.6%, respectively. The mechanisms for the removal of heavy metals from wastewater by MgO-5%@RHB-450 and MgO-5%@RHB-600 mainly included complexation, ion exchange and precipitation, and the immobilization mechanisms in soil may be precipitation, complexation and pore filling. In general, this study provides high-efficiency functional materials for the remediation of heavy metal pollution.

In Situ Synthesis of Zero-Valent Iron-Decorated Lignite Carbon for Aqueous Heavy Metal Remediation

Lignite’s large abundance, physicochemical properties and low cost are attractive for industrial wastewater remediation. However, directly applying lignite for wastewater treatment suffers low efficiency. Here, we synthesize highly efficient zero-valent iron (ZVI)-decorated lignite carbon through the in-situ carbonization of a lignite and FeCl2 mixture for heavy metal removal. The effect of carbonization temperature on the morphology, structure and crystallite phases of ZVI-decorated lignite carbons (ZVI-LXs) was investigated. At an optimized temperature (i.e., 1000 °C), ZVI particles were found evenly distributed on the lignite matrix with the particles between 20 to 190 nm. Moreover, ZVI particles were protected by a graphene shell that was formed in situ during the carbonization. The synthesized ZVI-L1000 exhibited higher Cu2+, Pb2+ and Cd2+ stripping capacities than pristine lignite in a wide pH range of 2.2–6.3 due to the surface-deposited ZVI particles. The maximum Langmuir adsorption capacities of ZVI-L1000 for Cd2+, Pb2+ and Cu2+ were 38.3, 55.2 and 42.5 mg/g at 25 °C, respectively, which were 7.8, 4.5 and 10.6 times greater than that of pristine lignite, respectively. ZVI-L1000 also exhibited a fast metal removal speed (~15 min), which is ideal for industrial wastewater treatment. The pseudo-second-order model fits well with all three adsorptions, indicating that chemical forces control their rate-limiting adsorption steps. The reduction mechanisms of ZVI-L1000 for heavy metals include reduction, precipitation and complexation.

Solvent-Free Synthesis of MgO-Modified Biochars for Phosphorus Removal from Wastewater

Adsorption is an efficient technology for removing phosphorus from wastewater to control eutrophication. In this work, MgO-modified biochars were synthesized by a solvent-free ball milling method and used to remove phosphorus. The MgO-modified biochars had specific surface areas 20.50–212.65 m² g⁻¹ and pore volume 0.024–0.567 cm³ g⁻¹. The as-prepared 2MgO/BC-450-0.5 had phosphorus adsorption capacities of 171.54 mg g⁻¹ at 25 °C and could remove 100% of phosphorus from livestock wastewater containing 39.51 mg L⁻¹ phosphorus. The kinetic and isotherms studied show that the pseudo-second-order model (R² = 0.999) and Langmuir models (R² = 0.982) could describe the adoption process well. The thermodynamic analysis indicated that the adsorption of phosphorus on the MgO-modified biochars adsorbent was spontaneous and endothermic. The effect of pH, FTIR spectra and XPS spectra studies indicated that the phosphorus adsorption includes a protonation process, electrostatic attraction and precipitation process. This study provides a new strategy for biochar modification via a facile mechanochemical method.

Mixed bacteria-loaded biochar for the immobilization of arsenic, lead, and cadmium in a polluted soil system: Effects and mechanisms

The present study explored the immobilization of mixed bacteria-loaded biochar on As, Pb, and Cd was explored. Physisorption and sodium alginate encapsulation were used to synthesize two kinds of mixed bacteria-loaded biochars, referred to as BCM and BCB. The observations of Scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectroscopy distinctly demonstrated the colonization of mixed bacteria on biochar. Besides, the addition of BCM and BCB could increase soil pH with increasing incubation time. The residual fraction of heavy metals and soil dehydrogenase activities were also enhanced after 28 days of incubation. Pb was mainly immobilized by co-precipitation, which meant that Pb could be converted into a consistent crystalline form such as Pb₅(PO₄)₃OH. The X-ray photoelectron spectroscopy and X-ray diffraction analyses of materials identified the formation of Ca₂As₂O₇ and the presence of oxidation from trivalent arsenic to pentavalent arsenic. Cd was adsorbed by forming precipitations (CdCO₃) and exchanging ions with the BCM and BCB. Synergistic reactions between anions and cations also contributed to the immobilization of heavy metals, such as the formation of PbAs₂O₆ and Cd₃(AsO₄)₂. These results confirmed that mixed bacteria-loaded biochar was a feasible technology for the remediation of heavy metals contamination in site soils.

From wastes to functions: preparation of layered double hydroxides from industrial waste and its removal performance towards phosphates

To control eutrophication and recover phosphate from wastewater, a calcium carbide slag and red mud composite material (CR-LDH) was prepared using industrial waste as raw material for phosphorus adsorption. The morphology and structure of synthesized CR-LDH were characterized by FT-IR, SEM, EDS, and XRD measurements. Bath adsorption test results showed that the optimal dosages of adsorbent and pH for phosphate were 5 g·L^-1 and pH of 7, respectively. The experimental data could be well described by pseudo-second-order kinetic and Langmuir isotherm models, suggesting that the adsorption process of CR-LDH with respect to phosphate was a chemical and monolayer process. The theoretical maximum adsorption capacity obtained by Langmuir isotherm model was 16.06 mg·g^-1 at 25 °C. The intra-particle diffusion model fitting results indicated that the adsorption of phosphate by CR-LDH was controlled by both liquid membrane diffusion and intra-particle diffusion. Phosphate was bound to CR-LDH via synergistic effect of physical adsorption, ion exchange, anion intercalation, and chemical precipitation as evidenced from a combination of microscopic analysis and adsorption mechanism study. The actual phosphate-containing wastewater investigation showed that CR-LDH not only exhibited good removal effect on phosphate, but also could greatly reduce turbidity, COD, and ammonia nitrogen, which was suitable for disposal of practical wastewater. The COD, turbidity, and NH₄⁺-N could be reduced by 42.39%, 77.20%, and 20.71%, respectively. These results indicate that CR-LDH can be considered as potential adsorbent for the treatment of phosphate-containing wastewater, which will be helpful to achieve the goal of "treating waste with waste and turning waste into treasure".

Effects of CoMo/γ-Al2O3 Catalysts on Product Hydrocarbon and Phenol Distribution during Hydrodeoxygenation of Oxidized Bio-Oil in a Batch Reactor

Hydrodeoxygenation is an essential process for producing liquid transportation fuels. In this study, the effects of CoMo/γ-Al2O3 catalysts form and loading ratio on the hydrodeoxygenation upgrading of bio-oil were investigated in a batch reactor. Raw bio-oil was first oxidized with hydrogen peroxides and oxone to obtain the oxidized bio-oil with reduced levels of aldehydes and ketones, increasing the organic liquid yield during hydrodeoxygenation by suppressing the coke formation. CoMo/γ-Al2O3 was selected as the catalyst because of its low cost and commercial availability. The effect of the reduction and sulfidation of CoMo/γ-Al2O3 catalyst on the hydrodeoxygenation of the oxidized bio-oil was compared. The effect of the catalyst loading ratio on bio-oil hydrodeoxygenation using sulfided CoMo/γ-Al2O3 catalysts was also investigated. The research results showed that the sulfided CoMo/γ-Al2O3 catalyst facilitated the formation of hydrocarbons, while the reduced CoMo/γ-Al2O3 catalyst produced more phenols in the organic liquids. Moreover, a high sulfided catalyst loading ratio promoted the formation of hydrocarbons.