Suspect and non-target screening of contaminants of emerging concern in streams in agricultural watersheds

Microbial degradation of contaminants of emerging concern: metabolic, genetic and omics insights for enhanced bioremediation

The perpetual release of natural/synthetic pollutants into the environment poses major risks to ecological balance and human health. Amongst these, contaminants of emerging concern (CECs) are characterized by their recent introduction/detection in various niches, thereby causing significant hazards and necessitating their removal. Pharmaceuticals, plasticizers, cyanotoxins and emerging pesticides are major groups of CECs that are highly toxic and found to occur in various compartments of the biosphere. The sources of these compounds can be multipartite including industrial discharge, improper disposal, excretion of unmetabolized residues, eutrophication etc., while their fate and persistence are determined by factors such as physico-chemical properties, environmental conditions, biodegradability and hydrological factors. The resultant exposure of these compounds to microbiota has imposed a selection pressure and resulted in evolution of metabolic pathways for their biotransformation and/or utilization as sole source of carbon and energy. Such microbial degradation phenotype can be exploited to clean-up CECs from the environment, offering a cost-effective and eco-friendly alternative to abiotic methods of removal, thereby mitigating their toxicity. However, efficient bioprocess development for bioremediation strategies requires extensive understanding of individual components such as pathway gene clusters, proteins/enzymes, metabolites and associated regulatory mechanisms. "Omics" and "Meta-omics" techniques aid in providing crucial insights into the complex interactions and functions of these components as well as microbial community, enabling more effective and targeted bioremediation. Aside from natural isolates, metabolic engineering approaches employ the application of genetic engineering to enhance metabolic diversity and degradation rates. The integration of omics data will further aid in developing systemic-level bioremediation and metabolic engineering strategies, thereby optimising the clean-up process. This review describes bacterial catabolic pathways, genetics, and application of omics and metabolic engineering for bioremediation of four major groups of CECs: pharmaceuticals, plasticizers, cyanotoxins, and emerging pesticides.

Farmland's silent threat: Comprehensive multimedia assessment of micropollutants through non-targeted screening and targeted analysis in agricultural systems

Intricate agricultural ecosystems markedly influence the dynamics of organic micropollutants, posing substantial threats to aquatic organisms and human health. This study examined the occurrence and distribution of organic micropollutants across soils, ditch sediment, and water within highly intensified farming setups. Using a non-targeted screening method, we identified 405 micropollutants across 10 sampling sites, which mainly included pesticides, pharmaceuticals, industrial chemicals, and personal care products. This inventory comprised emerging contaminants, banned pesticides, and controlled pharmaceuticals that had eluded detection via conventional monitoring. Targeted analysis showed concentrations of 3.99-1021 ng/g in soils, 4.67-2488 ng/g in sediment, and 12.5-9373 ng/L in water, respectively, for Σ40pesticides, Σ8pharmaceuticals, and Σ3industrial chemicals, indicating notable spatial variability. Soil organic carbon content and wastewater discharge were likely responsible for their spatial distribution. Principal component analysis and correlation analysis revealed a potential transfer of micropollutants across the three media. Particularly, a heightened correlation was decerned between soil and sediment micropollutant levels, highlighting the role of sorption processes. Risk quotients surpassed the threshold of 1 for 13-23 micropollutants across the three media, indicating high environmental risks. This study highlights the importance of employing non-targeted and targeted screening in assessing and managing environmental risks associated with micropollutants.

Fingerprinting of emerging contaminants in L'Albufera natural park (Valencia, Spain): Implications for wetland ecosystem health

Wetlands are crucial ecosystems that are increasingly threatened by anthropogenic activities. L'Albufera Natural Park, the second-largest coastal wetland in Spain, faces significant pressures from surrounding agricultural lands, industrial activities, human settlements, and associated infrastructures, including treated wastewater inputs. This study aimed at (i) establishing pathways of emerging pollutants entering the natural wetland using both target and non-target screening (NTS) for management purposes, (ii) distinguishing specific contamination hotspots through Geographic Information System (GIS) and (iii) performing basic ecological risk assessment to evaluate ecosystem health. Two sampling campaigns were conducted in the spring and summer of 2019, coinciding with the start and end of the rice cultivation season, the region's primary agricultural activity. Each campaign involved the collection of 51 samples. High-resolution mass spectrometry (HRMS) was employed, using a simultaneous NTS approach with optimized gradients for pesticides and moderately polar compounds, along with complementary NTS methods for polar compounds, to identify additional contaminants of emerging concern (CECs). Quantitative analysis revealed that fungicides comprised a substantial portion of detected CECs, constituting approximately 50% of the total quantified pesticides. Tebuconazole emerged as the predominant fungicide, with the highest mean concentration (>16.9 μg L-1), followed by azoxystrobin and tricyclazole. NTS tentatively identified 16 pesticides, 43 pharmaceuticals and personal care products (PPCPs), 24 industrial compounds, and 12 other CECs with high confidence levels. Spatial distribution analysis demonstrated significant contamination predominantly in the southwestern region of the park, gradually diminishing towards the north-eastern outlet. The composition of contaminants varied between water and sediment samples, with pharmaceuticals predominating in water and industrial compounds in sediments. Risk assessment, evaluated through risk quotient calculations based on parent compound concentrations, revealed a decreasing trend towards the outlet, suggesting wetland degradation capacity. However, significant risk levels persist throughout much of the Natural Park, highlighting the urgent need for mitigation measures to safeguard the integrity of this vital ecosystem.

The mother-offspring transfer of chlorothalonil through human breast milk: A multi-city cross-sectional study

4-Hydroxychlorothalonil (4-OH CHT), the main metabolite of chlorothalonil and the most widely used fungicide, has been frequently detected in human samples during monitoring. 4-OH CHT may exhibit higher toxicity and persistence in the environment compared to its prototype. In this study, a total of 540 paired serum and breast milk samples from pregnant women in three provinces in China were monitored for contaminant residues. 4-OH CHT was analyzed in the samples using ultra high-performance liquid chromatography - high-resolution mass spectrometry with a detection limit of 20 ng/L. The study investigated the effects of demographic factors, such as BMI, region of residence, and education level, on the levels of 4-OH CHT residues in serum and breast milk. Among the three provinces, the highest median concentration of 4-OH CHT in serum samples was observed in Hebei (1.04 × 103 ng/L), while the highest median concentration of 4-OH CHT in breast milk samples was observed in Hubei and Guangdong (491 ng/L). Multiple linear regression was used to investigate the significant positive correlation between 4-OH CHT in serum and breast milk (p = 0.000) after adjusting for personal characteristics. Based on this, the study further explored the influencing factors of transfer efficiencies (TEs) in conjunction with the individual TEs and the personal characteristics of the participants. Our results demonstrated that the age of the volunteers and their exercise habits had an effect on TEs, but further studies are needed to determine whether exercise leads to an increase in TEs.

Integrated occurrence of contaminants of emerging concern, including microplastics, in urban and agricultural watersheds in the State of São Paulo, Brazil

Contaminants of emerging concern (CECs), including microplastics, have been the focus of many studies due to their environmental impact, affecting biota and human health. The diverse land uses and occupation of watersheds are important parameters driving the occurrence of these contaminants. CECs such as pesticides, drugs, hormones, and industrial-origin substances were analyzed in urban/industrial (Atibaia) and agricultural (Preto/Turvo) watersheds located in São Paulo state, Brazil. A total of 24 CECs were investigated, and, as a result, only 5 (caffeine, carbendazim, atrazine, ametrine and 2-hydroxytrazine) were responsible for 81.73 % of the statistical difference between watersheds contamination profile. The Atibaia watershed presented considerable concentrations of caffeine (ranging from 75 to 2025 ng L-1), while carbendazim (44 to 1144 ng L-1) and atrazine (3 to 266 ng L-1) presented highest levels in Preto/Turvo watershed. In all sampling points, the cumulative potential aquatic life risk assessed by the NORMAN database indicates some level of environmental concern associated to pesticides and caffeine (risk quotient >1). Microplastics had been analyzed in both watersheds, being the white/transparent fragments in size between 100 and 250 μm the most detected in this study. The estimated abundance in the Atibaia watershed ranged from 349 to 2898 items m-3 presenting some influence of pluviosity, while in Rio Preto/Turvo ranged from 169 to 6370 items m-3, being more abundant in the dam area without a clear influence of pluviosity. In both basins, polyethylene and polypropylene were the most detected polymers, probably due to the intense use of single-use plastics in urban areas. Possibly, due to the distinct physic-chemical properties of microplastics and organic CECs, no correlations were observed between their occurrence, which makes us conclude that they have different transport mechanism, behavior, and fate in the environment.

Where the rubber meets the road: Emerging environmental impacts of tire wear particles and their chemical cocktails

About 3 billion new tires are produced each year and about 800 million tires become waste annually. Global dependence upon tires produced from natural rubber and petroleum-based compounds represents a persistent and complex environmental problem with only partial and often-times, ineffective solutions. Tire emissions may be in the form of whole tires, tire particles, and chemical compounds, each of which is transported through various atmospheric, terrestrial, and aquatic routes in the natural and built environments. Production and use of tires generates multiple heavy metals, plastics, PAH's, and other compounds that can be toxic alone or as chemical cocktails. Used tires require storage space, are energy intensive to recycle, and generally have few post-wear uses that are not also potential sources of pollutants (e.g., crumb rubber, pavements, burning). Tire particles emitted during use are a major component of microplastics in urban runoff and a source of unique and highly potent toxic substances. Thus, tires represent a ubiquitous and complex pollutant that requires a comprehensive examination to develop effective management and remediation. We approach the issue of tire pollution holistically by examining the life cycle of tires across production, emissions, recycling, and disposal. In this paper, we synthesize recent research and data about the environmental and human health risks associated with the production, use, and disposal of tires and discuss gaps in our knowledge about fate and transport, as well as the toxicology of tire particles and chemical leachates. We examine potential management and remediation approaches for addressing exposure risks across the life cycle of tires. We consider tires as pollutants across three levels: tires in their whole state, as particulates, and as a mixture of chemical cocktails. Finally, we discuss information gaps in our understanding of tires as a pollutant and outline key questions to improve our knowledge and ability to manage and remediate tire pollution.

Occurrence and environmental risks of contaminants of emerging concern across the River Athi Basin, Kenya, in dry and wet seasons

Globally, the environmental occurrence of Contaminants of Emerging Concern (CECs) including pharmaceuticals (PhACs), personal care products (PCPs) and modern polar pesticides has raised ecological and human health awareness. However, as the developed world races against time to establish regulatory measures to mitigate their effects, developing nations including Kenya are lagging behind, partly due to unavailability of adequate data. In this work, a multi-residue analysis of 86 CECs was carried out on 198 surface water and 18 effluent samples collected at 24 sites across the River Athi basin area, Kenya, in both dry and rainy seasons. Overall, 57 CECs comprising 31 PhACs (0.4 ng L-1-142 μg L-1), 6 PCPs (0.7-570 ng L-1) and 20 pesticides (0.3 ng L-1-8.3 μg L-1) were detected. The maximum loads varied from 217 g day-1 (PCPs) to 46 kg day-1 (PhACs). Individually, carbamazepine, nevirapine, sulfamethoxazole and DEET were the most ubiquitous CECs, with detection frequencies (DF) higher than 80 %. The highest concentrations were observed at river sites that are heavily impacted by informal settlements, highlighting the critical role of slums in urban rivers pollution. At least 8 CECs including acetamiprid, alachlor, atrazine, diuron, nevirapine and paracetamol show potential risk to algae, Daphnia magna and fish, as exemplified by Risk Quotients (RQ) up to 174. Similarly, potential risk of antibiotic resistant bacteria development is evident (RQ up to 64), being driven by metronidazole, sulfamethoxazole and trimethoprim. Ultimately, further studies on the occurrence and distribution of antibiotic resistant bacteria within the basin and among the communities consuming untreated river water for drinking is merited.

Industrial waste-based adsorbents as a new trend for removal of water-borne emerging contaminants

Emerging contaminants in wastewater are one of the growing concerns because of their adverse effects on human health and ecosystems. Adsorption technology offers superior performance due to its cost-effectiveness, stability, recyclability, and reliability in maintaining environmental and health standards for toxic pollutants. Despite extensive research on the use of traditional adsorbents to remove emerging contaminants, their expensiveness, lack of selectivity, and complexity of regeneration remain some of the challenges. Industrial wastes viz. blast furnace slag, red mud, and copper slag can be used to develop efficacious adsorbents for the treatment of emerging contaminants in water. Advantages of the use of such industrial wastes include resource utilization, availability, cost-effectiveness, and waste management. Nevertheless, little is known so far about their application, removal efficacy, adsorption mechanisms, and limitations in the treatment of emerging contaminants. A holistic understanding of the application of such unique industrial waste-derived adsorbents in removing emerging contaminants from water is need of the hour to transform this technology from bench-scale to pilot and large-scale applications. This review investigates different water treatment techniques associated with industrial waste-based adsorbents derived from blast furnace slag, red mud, and copper slag. Besides, this review provides important insights into the growing trends of utilizing such novel types of adsorbents to remove emerging contaminants from water with an emphasis on removal efficacy, controlling measures, adsorption mechanisms, advantages, and limitations. The present timely review brings the current state of knowledge into a single reference which could be a strong platform for future research in understanding the latest advancements, decision making, and financial management related to the treatment of wastewater using industrial waste-based adsorbents.

Ubiquity of Amino Accelerators and Antioxidants in Road Dust from Multiple Land Types: Targeted and Nontargeted Analysis

Amino accelerators and antioxidants (AAL/Os), as well as their degradation derivatives, are industrial additives of emerging concern due to their massive production and use (particularly in rubber tires), pervasiveness in the environment, and documented adverse effects. This study delineated their inter-regional variations in road dust collected from urban/suburb, agricultural, and forest areas, and screened for less-studied AAL/O analogues with high-resolution mass spectrometry. 1,3-Diphenylguanidine (DPG; median concentration: 121 ng/g) and N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q; 9.75 ng/g) are the most abundant congeners, constituting 69.7% and 41.4% of the total concentrations of AAL/Os (192 ng/g) and those of AAO transformation products (22.3 ng/g), respectively. The spatial distribution across the studied sites suggests evident human impacts, reflected by the pronounced urban signature and vehicle-originated pollution. Our nontargeted analysis of the most-contaminated road dust identified 16 AAL/O-related chemicals, many of which have received little investigation. Particularly, environmental and toxicological information remains extremely scarce for five out of the 10 most concerning compounds prioritized in terms of their dusty residues and toxicity including 1,2-diphenyl-3-cyclohexylguanidine (DPCG), N,N''-bis[2-(propan-2-yl)phenyl]guanidine (BPPG), and N-(4-anilinophenyl)formamide (PPD-CHO). Additionally, dicyclohexylamine (DChA), broadly applied as an antioxidant in automobile products, had an even greater median level than DPG. Therefore, future research on their health risks and (eco)toxic potential is of high importance.

Effect of surfactants on the sorption-desorption, degradation, and transport of chlorothalonil and hydroxy-chlorothalonil in agricultural soils

The fungicide chlorothalonil (CTL) and its metabolite hydroxy chlorothalonil (OH-CTL) constitute a risk of soil and water contamination, highlighting the need to find suitable soil remediation methods for these compounds. Surfactants can promote the bioavailability of organic compounds for enhanced microbial degradation, but the performance depends on soil and surfactant properties, sorption-desorption equilibria of contaminants and surfactants, and possible adverse effects of surfactants on microorganisms. This study investigated the influence of five surfactants [e.g., Triton X-100 (TX-100), sodium dodecyl sulphate (SDS), hexadecyltrimethylammonium bromide (HDTMA), Aerosol 22 and Tween 80] on the sorption-desorption, degradation, and mobility of CTL and OH-CTL in two volcanic and one non-volcanic soil. Sorption and desorption of fungicides depended on the sorption of surfactants on soils, surfactants' capacity to neutralize the net negative charge of soils, surfactants' critical micellar concentration, and pH of soils. HDTMA was strongly adsorbed on soils, which shifted the fungicide sorption equilibria by increasing the distribution coefficient (K_d) values. Contrarily, SDS and TX-100 lowered CTL and OH-CTL sorption on soils by decreasing the K_d values, which resulted in an efficient extraction of the fungicide compounds from soil. SDS increased the degradation of CTL, especially in the non-volcanic soil (DT₅₀ values were 14 and 7 days in natural and amended soils, with final residues <7% of the initial dose), whereas TX-100 enabled an early start and sustenance of OH-CTL degradation in all soils. CTL and OH-CTL stimulated soil microbial activities without noticeable deleterious effects of the surfactants. SDS and TX-100 also reduced the vertical transport of OH-CTL in soils. Results of this study could be extended to soils in other regions of the world because the tested soils represent widely different physical, chemical, and biological properties.

Screening of pesticides and emerging contaminants in eighteen Greek lakes by using target and non-target HRMS approaches: Occurrence and ecological risk assessment

Lakes, albeit ecosystems of vital importance, are insufficiently investigated with respect to the degradation of water quality due to the organic micropollutants load. As regards Greece, screening of lake waters is scarce and concerns a limited number of contaminants. However, understanding the occurrence of contaminants of emerging concern (CECs) and other micropollutants in lakes is essential to appraise their potential ecotoxicological effects. The aim of this study was to deploy a multiresidue screening approach based on liquid chromatography-high-resolution mass spectrometry (HRMS) to get a first snapshot for >470 target CECs, including pesticides, pharmaceuticals, personal care products (PPCPs), per- and polyfluoroalkyl substances (PFASs), as well as organophosphate flame retardants (OPFRs) in eighteen Greek lakes in Central, Northern and West Northern Greece. The omnipresent compounds were DEET (N,N-diethyl-meta-toluamide), caffeine and TCPP (tris (1-chloro-2-propyl) phosphate). Maximum concentrations varied among the different classes. DEET was detected at a maximum average concentration of >1000 ng/L in Lake Orestiada, while its mean concentration was estimated at 233 ng/L. The maximum total concentrations for pesticides, PPCPs, PFASs, and OPFRs were 5807, 2669, 33.1, and 1214 ng/L, respectively, indicating that Greek lakes are still threatened by the intense agricultural activity. Besides, HRMS enabled a non-target screening by exploiting the rich content of the full-scan raw data, allowing the 'discovery' of tentative candidates, such as surfactants, pharmaceuticals, and preservatives among others, without reference standards. The potential ecotoxicity was assessed by both the risk quotient method and ECOSAR (Ecological Structure Activity Relationships) revealing low risk for most of the compounds.

Semiconductors Application Forms and Doping Benefits to Wastewater Treatment: A Comparison of TiO2, WO3, and g-C3N4

Photocatalysis has been vastly applied for the removal of contaminants of emerging concern (CECs) and other micropollutants, with the aim of future water reclamation. As a process based upon photon irradiation, materials that may be activated through natural light sources are highly pursued, to facilitate their application and reduce costs. TiO2 is a reference material, and it has been greatly optimized. However, in its typical configuration, it is known to be mainly active under ultraviolet radiation. Thus, multiple alternative visible light driven (VLD) materials have been intensively studied recently. WO3 and g-C3N4 are currently attractive VLD catalysts, with WO3 possessing similarities with TiO2 as a metal oxide, allowing correlations between the knowledge regarding the reference catalyst, and g-C3N4 having an interesting and distinct non-metallic polymeric structure with the benefit of easy production. In this review, recent developments towards CECs degradation in TiO2 based photocatalysis are discussed, as reference catalyst, alongside the selected alternative materials, WO3 and g-C3N4. The aim here is to evaluate the different techniques more commonly explored to enhance catalyst photo-activity, specifically doping with multiple elements and the formation of composite materials. Moreover, the possible combination of photocatalysis and ozonation is also explored, as a promising route to potentialize their individual efficiencies and overcome typical drawbacks.

Bioprocess performance, transformation pathway, and bacterial community dynamics in an immobilized cell bioreactor treating fludioxonil-contaminated wastewater under microaerophilic conditions

Fludioxonil is a post-harvest fungicide contained in effluents produced by fruit packaging plants, which should be treated prior to environmental dispersal. We developed and evaluated an immobilized cell bioreactor, operating under microaerophilic conditions and gradually reduced hydraulic retention times (HRTs) from 10 to 3.9 days, for the biotreatment of fludioxonil-rich wastewater. Fludioxonil removal efficiency was consistently above 96%, even at the shortest HRT applied. A total of 12 transformation products were tentatively identified during fludioxonil degradation by using liquid chromatography coupled to quadrupole time-of-flight Mass spectrometry (LC-QTOF-MS). Fludioxonil degradation pathway was initiated by successive hydroxylation and carbonylation of the pyrrole moiety and disruption of the oxidized cyanopyrrole ring at the NH-C bond. The detection of 2,2-difluoro-2H-1,3-benzodioxole-4-carboxylic acid verified the decyanation and deamination of the molecule, whereas its conversion to the tentatively identified compound 2,3-dihydroxybenzoic acid indicated its defluorination. High-throughput amplicon sequencing revealed that HRT shortening led to reduced α-diversity, significant changes in the β-diversity, and a shift in the bacterial community composition from an initial activated sludge system typical community to a community composed of bacterial taxa like Clostridium, Oligotropha, Pseudomonas, and Terrimonas capable of performing advanced degradation and/or aerobic denitrification. Overall, the immobilized cell bioreactor operation under microaerophilic conditions, which minimizes the cost for aeration, can provide a sustainable solution for the depuration of fludioxonil-contaminated agro-industrial effluents.

A Review on Constructed Treatment Wetlands for Removal of Pollutants in the Agricultural Runoff

Constructed wetland (CW) is a popular sustainable best management practice for treating different wastewaters. While there are many articles on the removal of pollutants from different wastewaters, a comprehensive and critical review on the removal of pollutants other than nutrients that occur in agricultural field runoff and wastewater from animal facilities, including pesticides, insecticides, veterinary medicine, and antimicrobial-resistant genes are currently unavailable. Consequently, this paper summarized recent findings on the occurrence of such pollutants in the agricultural runoff water, their removal by different wetlands (surface flow, subsurface horizontal flow, subsurface vertical flow, and hybrid), and removal mechanisms, and analyzed the factors that affect the removal. The information is then used to highlight the current research gaps and needs for resilient and sustainable treatment systems. Factors, including contaminant property, aeration, type, and design of CWs, hydraulic parameters, substrate medium, and vegetation, impact the removal performance of the CWs. Hydraulic loading of 10–30 cm/d and hydraulic retention of 6–8 days were found to be optimal for the removal of agricultural pollutants from wetlands. The pollutants in agricultural wastewater, excluding nutrients and sediment, and their treatment utilizing different nature-based solutions, such as wetlands, are understudied, implying the need for more of such studies. This study reinforced the notion that wetlands are effective for treating agricultural wastewater (removal > 90%) but several research questions remain unanswered. More long-term research in the actual field utilizing environmentally relevant concentrations to seek actual impacts of weather, plants, substrates, hydrology, and other design parameters, such as aeration and layout of wetland cells on the removal of pollutants, are needed.