Role of sunlight and oxygen on the performance of photo-Fenton process at near neutral pH using organic fertilizers as iron chelates

A novel advanced reduction process for the reduction of Cr(VI): Assistance of microbial metabolites

Advanced reduction processes (ARPs) have become hotspot because of their fast and efficient features in pollutant treatment. In this study, a novel ARP was raised through the assistance of biological wastewater degradation solutions (PDs), to completely reduce Cr(VI). Enterobacter cloacae YN-4, which could completely degrade 1500 mg/L phenol within 72 h, was isolated and identified. While, the content of organic acids and their derivatives in PDs was extremely high (74.76 %). After the combination of PDs with Fe(III) and UV, 10 mg/L Cr(VI) was completely reduced within 66 min, whose reduction rate of Cr(VI) was stable at various concentrations (10-100 mg/L), which was applicable on electroplating wastewater. In addition, Cr(VI) could be reduced stably (71.63 %) after 10 cycles. Compared with the reported ARPs, herein, the components was complex, which was firstly proposed that simultaneous action of polycarboxylic acids, monocarboxylic acids, amino acids and alcohols could promote and ensure the stable reduction of Cr(VI). Among them, the multispecies radicals·CO2- and·O2- generated in PDs were combined with Fe(II), to co-reduce Cr(VI). This strategy produces a wide variety of radicals, which can provide an alternative pathway for remediation of various heavy metals and organic pollutants.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

Exploring the potential of Fe(III)-EGTA and Fe(III)-DTPA as the catalysts to enhance UV/persulfate in the degradation of aqueous sulfamethazine

The combination of UV and water-soluble Fe(III) complexes is an effective method for generating Fe(II) in situ for activating advanced oxidation processes. This study explored the potential of Fe(III)-diethylenetriaminepentaacetic acid (Fe(III)-DTPA) and Fe(III)-ethylene glycol-bis(2-aminoethylether)-N,N,N',N'-tetraacetic acid (Fe(III)-EGTA) in activating the UV/persulfate (UV/PS) for sulfamethazine removal. The initial screening showed that Fe(III)-EGTA and Fe(III)-DTPA could significantly improve the rate of sulfamethazine removal. The optimum molar ratios of persulfate to Fe(III)-DTPA and Fe(III)-EGTA were 100:1 and 100:2.5. The predicted percentage of sulfamethazine removal under the optimized conditions, obtained using response surface methodology, was ~99% for both catalysts. The pH range of 6 to 8 did not significantly affect the performance of UV/PS in the removal of sulfamethazine. The percentage sulfamethazine removal in the selected water samples was ranged from 93.6% to 99.6%, agreeing with the predicted value. The performance of both catalysts in activating UV/PS is comparable with that of the frequently used Fe(III)-EDDS. PRACTITIONERS POINTS: The potential of Fe(III)-DTPA and Fe(III)-EGTA in activating UV/persulfate (UV/PS) was explored. Fe(III)-DTPA and Fe(III)-EGTA improved the performance of UV/PS in sulfamethazine removal. Fe(III)-DTPA and Fe(III)-EGTA are effective in catalyzing UV/PS under pH 6 to 8. The performance of Fe(III)-DTPA and Fe(III)-EGTA is comparable with well-studied Fe(III)-EDDS.

Photo-Fenton oxidation of cylindrospermopsin at neutral pH with LEDs

Cylindrospermopsin (CYN) is a potent cyanobacterial toxin found in freshwaters worldwide. In this work, the feasibility of the photo-Fenton process under neutral pH using light emitting diodes as irradiation source for the removal of this hazardous cyanotoxin from freshwater was investigated. The impact of the kind of iron chelating agent (ethylenediamine-N, N'-disuccinic acid vs. ethylenedinitrilotetraacetic acid) as well as the effect of the main operating conditions viz. H₂O₂ dose, Fe(III) load, initial CYN concentration, and Fe(III):EDDS molar ratio on the performance of the process was systematically evaluated. EDDS was selected as the most appropriate iron chelating agent considering the kinetics of the process and the environmental impact (Vibrio fischeri and Artemia salina). Under optimized conditions ([H₂O₂] = 30 mg L^-1; [Fe(III)] = 5 mg L^-1; Fe(III):ligand = 1:0.5 (molar ratio)), complete removal of CYN was achieved in 15-min reaction time. Furthermore, the catalytic system showed to be effective in real water matrices (river and reservoir waters) spiked with CYN. Although the presence of inorganic ions (mainly HCO₃^-/CO₃^2-) and dissolved organic carbon decreased the oxidation rate of CYN due to scavenging reactions and iron coordination, respectively, complete elimination of the cyanotoxin was achieved in all cases. The fate of EDDS along the process was also evaluated to demonstrate that the catalytic system investigated, apart from its effectiveness, warrants the complete absence of residues after reaction. Therefore, the proposed system constitutes a promising method for cyanotoxin treatment either as a drinking water treatment step in conventional plants or as a potential remediation strategy in the natural environment.

Recent Advances in the Development of Novel Iron–Copper Bimetallic Photo Fenton Catalysts

Advanced oxidation processes (AOPs) have been postulated as viable, innovative, and efficient technologies for the removal of pollutants from water bodies. Among AOPs, photo-Fenton processes have been shown to be effective for the degradation of various types of organic compounds in industrial wastewater. Monometallic iron catalysts are limited in practical applications due to their low catalytic activity, poor stability, and recyclability. On the other hand, the development of catalysts based on copper oxides has become a current research topic due to their advantages such as strong light absorption, high mobility of charge carriers, low environmental toxicity, long-term stability, and low production cost. For these reasons, great efforts have been made to improve the practical applications of heterogeneous catalysts, and the bimetallic iron–copper materials have become a focus of research. In this context, this review focuses on the compilation of the most relevant studies on the recent progress in the application of bimetallic iron–copper materials in heterogeneous photo–Fenton-like reactions for the degradation of pollutants in wastewater. Special attention is paid to the removal efficiencies obtained and the reaction mechanisms involved in the photo–Fenton treatments with the different catalysts.

Removal of dyes, oils, alcohols, heavy metals and microplastics from water with superhydrophobic materials

A wide variety of pollutants can be currently found in water that are extremely difficult to remove due to their chemical composition and properties. A lot of effort has been made to tackle this issue that directly affects the environment. In this scenario, superhydrophobic surfaces, which have a water contact angle >150°, have emerged as an innovative technology that could be applied in different ways. Their environmental applications show promise in removing emerging pollutants from water. While the number of publications on superhydrophobic materials has remained largely unchanged since 2019, the number of articles on the environmental applications of superhydrophobic surfaces is still rising, corroborating the interest in this area. Herein, we briefly present the basis of superhydrophobicity and show the different materials that have been used to remove pollutants from water. We have identified five types of emerging pollutants that are efficiently removed by superhydrophobic materials: oils, microplastics, dyes, heavy metals, and ethanol. Finally, the future challenges of these applications are also discussed, considering the state of the art of the environmental applications of superhydrophobic materials.

Use of organic fertilizers in solar photo-Fenton process as potential technology to remove pineapple processing wastewater in Costa Rica

Background: This work studied the use of the organic fertilizers DTPA-Fe and EDDS-Fe as iron chelates for solar driven photo-Fenton process at natural pH. This process was proposed to investigate its performance on removing a mixture of agrochemicals (propiconazole, imidacloprid and diuron) from pineapple processing wastewater to obtain a suitable effluent to be reused in the agricultural sector. Methods: Experiments were carried out in a solar simulator with a stirred cylindric photoreactor, with a volume of 150 mL and controlled temperature (20°C). The first set of experiments was carried out with ultrapure water to determine optimal iron and H 2O 2 concentrations. The second was performed with simulated wastewater of pineapple processing. Results: The optimized operational conditions for both iron complexes were 10 mg L -1 of Fe (III) and 25 mg L -1 of H 2O 2, since more than 80% of micropollutants (MP) (at an initial concentration of 1 mg L -1 of each compound) were removed in only 20 min with both DTPA-Fe and EDDS-Fe. The effect of organic matter and inorganic salts on radicals scavenging and chelates stability was also investigated in the experiments performed with synthetic pineapple processing wastewater. The results disclosed differences depending on the iron complex. Nitrites were the principal component influencing the tests carried out with EDDS-Fe. While carbonates at low concentration only significantly affected the experiments performed with DTPA-Fe, they were the major influence on the MPs removal efficiency decrease. In contrast, the presence of Ca 2+ and Mg 2+ only influence on this last one. Finally, the results of phytotoxicity disclosed the suitability of treated effluent to be reused in the agricultural sector.  Conclusions: This work demonstrated that solar powered photo-Fenton catalysed by iron fertilizer EDDS is a suitable technology for depolluting water streams coming from pineapple processing plants at circumneutral pH, and its subsequent reuse for crop irrigation.

Review on effect of different type of dyes on advanced oxidation processes (AOPs) for textile color removal

The textile industry is one of the most valuable industries, especially in developing countries, because it employs a large portion of the workforce. However, the development of the textile industry has led to increasing concern about environmental issues. Wastewater from the textile industry has a high COD and an undesirable color. Color is one of the problems with the wastewater due to its toxicity and low biodegradability. Color in textile wastewater mainly originates from the dyestuff used during the dyeing or printing process. Amongst all of available technology for color removal, advanced oxidation processes (AOPs) are considered one of the best and the most potential technology. However, the understanding of AOPs reaction mechanism to degrade dyestuff is still limited. In general, dyes degradation mechanism will vary and mainly depend on the chemical structure of the dyes itself. Some reaction pathway that seems less favorable thermodynamically can still happen during the process. Understanding the mechanism will be beneficial for future dyes improvement, especially on developing the moiety of the aromatic compound in order to produce easily degraded dyes while maintaining the fastness quality.