Comprehensive characterization of industrial wastewaters using EEM fluorescence, FT-IR and 1H NMR techniques

Source-tracing of industrial and municipal wastewater effluent in river water via fluorescence fingerprinting

Fluorescence fingerprinting is a technique to uniquely characterize water samples based on their distinct composition of dissolved organic matter (DOM) measured via 3D fluorescence spectroscopy. It is an effective tool for monitoring the chemical composition of various water systems. This study examines a river affected by several municipal and industrial wastewater treatment plant (WWTP) effluents and aims to source-tracing them via fluorescence fingerprints based on parallel factor analysis (PARAFAC) components. Additional principal component analysis (PCA) clusters the WWTP effluents according to similarity. The results yield seven PARAFAC components characterizing the WWTP effluents. Considering the ratios among the components, these distinct fluorescence fingerprints are attributable to the studied industrial sectors: leather industry, meat processing, electronics industry, and municipal wastewater treatment. Furthermore, the fluorescence signal of the receiving river is examined by PCA and assessment of flow-weighted fluorescence intensities for source-tracing the fingerprints of the WWTP effluents. An analysis of the contribution of each WWTP effluent shows that during low flow, the fluorescence signal in the river is dominated by WWTP emissions. In contrast, during high flow events, the impact of WWTP emissions is masked by diffuse emissions. The techniques presented in this study have the potential to define generalizable fluorescence fingerprints for WWTP effluents of various industrial sectors and source-trace them in the receiving river. This approach represents a step closer to implementing complex fluorescence monitoring tools in rivers, tracing the impact of municipal and industrial WWTP effluents on riverine OM.

Advancing illicit connection diagnosis of urban stormwater pipes: Comprehensive analysis with EEM fluorescence spectroscopy

Urban drainage systems are significant contributors to the issue of black-odorous water bodies. The current application of stormwater pipe inspection technologies faces substantial limitations, especially in industrial areas with diverse wastewater. This study introduced an innovative approach using excitation-emission matrix (EEM) fluorescence spectroscopy for rapid and accurate diagnosis, providing a new perspective for diagnosing illicit connections. In single wastewater-type areas like residential zones, the method achieved a remarkable 91.5 % accuracy solely through spectra observation and fluorescence peak intensity comparison, outperforming conventional NH3-N-based techniques, which reached an accuracy of only 68.1 %. For regions with complex wastewater scenarios, after EEM subtraction, the residual spectra can be roughly categorized into four distinctive categories based on characteristics. This provides a preliminary assessment and helps in initially identifying the types and sources of inflowing wastewater. Furthermore, the least squares (LS) method refines diagnosis results, offering calculated coefficients reflecting the probability and severity of suspected wastewater intrusion. Simulation experiments and field sample analyses validated the feasibility and accuracy of the EEM-based method, highlighting its advantages for diagnosing illicit connections in both single and mixed wastewater scenarios. The results can significantly narrow down the investigation scope and enhance the confirmation of wastewater sources, exhibiting promising application prospects.

Preliminary analysis: Effect of a rotary generator of hydrodynamic cavitation on rheology and methane yield of wastewater sludge

Slightly acidic (pH 5.1) waste sludge with 4.7 % Total Solids (TS) was treated on a laboratory scale pined disc rotary generator of hydrodynamic cavitation (PD RGHC). Influence of four rotor discs with different number of cavitation generation units (CGUs) was investigated: 8-pins, 12-pins, 16-pins and 8-prism elements. The effect of hydrodynamic cavitation (HC) was investigated by analyzing rheological properties, surface tension, dewaterability, and particle size distribution. After subjecting the sludge to 30 cavitation passes, the dewatering ability of the sludge significantly decreased, resulting in a more than two-fold increase in Capillary Suction Time (CST). All regimes were successful in disintegrating particles to smaller sizes. A slight increase of sludge surface tension was measured post cavitation. Cavitated samples displayed a zero-shear viscosity, in contrast to the untreated sample, where viscosity noticeably increased as shear stress decreased. HC did not improve methane yield. Statistically significant correlations between physio-chemical properties and apparent viscosity at low shear stress were identified. Although there were no discernible statistical differences in sludge characteristics, some trends are visible among investigated CGU designs and warrant further research.

New insights into toxicity reduction and pollutants removal during typical treatment of papermaking wastewater

Papermaking wastewater contained various of toxic and hazardous pollutants that pose significant threats to both the ecosystem and human health. Despite these risks, limited research has addressed the detoxification efficiency and mechanism involved in the typical process treatment of papermaking wastewater. In this study, the acute toxicity of papermaking wastewater after different treatment processes was assessed using luminousbacteria, zebrafish and Daphnia magna (D. magna). Meanwhile, the pollution parament of the corresponding wastewater were measured, and the transformation of organic pollutant in the wastewater was identified by three-dimensional fluorescence and other techniques. Finally, the possible mechanism of toxicity variation in different treatment processes were explored in combination with correlation analyses. The results showed that raw papermaking wastewater displayed high acute toxicity to luminousbacteria, and exhibited slight acute toxicity and acute toxicity effect to zebrafish and D. magna, respectively. After physical and biochemical processes, not only the toxicity of the wastewater to zebrafish and D. magna was completely eliminated, but also the inhibitory effect on luminousbacteria was significantly reduced (TU value decreased from 11.07 to 1.66). Among them, the order of detoxification efficiency on luminousbacteria was air flotation > hydrolysis acidification > IC > aerobic process. Correlation analyses revealed a direct link between the reduced of Total Organic Carbon (TOC) and Chemical Oxygen Demand (COD) and the detoxification efficiency of the different processes on the wastewater. In particular, the removal of benzene-containing aromatic pollutant correlated positively with decreased toxicity. However, the Fenton process, despite lowering TOC and COD, increased of the acute toxicity of the luminousbacteria (TU value increased from 1.66 to 2.33). This may result from the transformation generation of organic pollutant and oxidant residues during the Fenton process. Hence, oxidation technologies such as the Fenton process, as a deep treatment process, should be more concerned about the ecological risks that may be caused while focusing on their effectiveness in removing pollutant.

Spatial and seasonal controls on dissolved organic matter composition in shallow aquifers under the rapidly developing city of Patna, India

The distribution and composition of dissolved organic matter (DOM) affects numerous (bio)geochemical processes in environmental matrices including groundwater. This study reports the spatial and seasonal controls on the distribution of groundwater DOM under the rapidly developing city of Patna, Bihar (India). Major DOM constituents were determined from river and groundwater samples taken in both pre- and post-monsoon seasons in 2019, using excitation-emission matrix (EEM) fluorescence spectroscopy. We compared aqueous fluorescent DOM (fDOM) composition to satellite-derived land use data across the field area, testing the hypothesis that the composition of groundwater DOM, and particularly the components associated with surface-derived ingress, may be controlled, in part, by land use. In the pre-monsoon season, the prominence of tryptophan-like components likely generated from recent biological activity overwhelmed the humic-like and tyrosine-like fluorescence signals. Evidence from fluorescence data suggest groundwater in the post-monsoon season is composed of predominantly i) plant-derived matter and ii) anthropogenically influenced DOM (e.g. tryptophan-like components). Organic tracers, as well as Eh and Cl-, suggest monsoonal events mobilise surface-derived material from the unsaturated zone, causing dissolved organic carbon (DOC) of more microbial nature to infiltrate to >100 m depth. A correlation between higher protein:humic-like fluorescence and lower vegetation index (NDVI), determined from satellite-based land use data, in the post-monsoon season, indicates the ingression of wastewater-derived OM in groundwater under the urban area. Attenuated protein:humic-like fluorescence in groundwater close to the river points towards the mixing of groundwater and river water. This ingress of surface-derived OM is plausibly exacerbated by intensive groundwater pumping under these areas. Our approach to link the composition of aqueous organics with land use could easily be adapted for similar hydrogeochemical settings to determine the factors controlling groundwater DOM composition in various contexts.

A colorimetric aptasensor fabricated with group-specific split aptamers and complex nanozyme for enrofloxacin and ciprofloxacin determination

Developing simultaneous detection methods for multiple targets is crucial for the field of food analysis. Herein, enrofloxacin (ENR) and ciprofloxacin (CIP) were taken as model targets. For the first time, a strategy to generate group-specific split aptamers was established by revealing and splitting the critical binding domain, and the split aptamers were exploited to design a four-way DNA junction (4WJ) which could regulate the enzymatic activity of chitosan oligosaccharide (COS)-AuNPs nanozyme to develop a colorimetric aptasensor. A pair of split aptamers were obtained for ENR (K_d = 15.00 nM) and CIP (K_d = 4.870 nM). The mechanism of COS binding with double-stranded DNA in the 4WJ was elucidated. Under optimal conditions, the colorimetric aptasensor enabled a wide linear detection range of 1.4-1400 nM and a limit of detection (LOD) of 321.1 pM and 961.0 pM towards ENR and CIP, respectively, which exhibited excellent sensitivity, selectivity, and availability in detecting ENR/CIP in seafood. This study expands the general strategies for generating robust aptamers and nanozyme complex and provides a good reference for developing multi-target detection methods.

Physical treatment synergized with natural surfactant for improving gas-water interfacial behavior and foam characteristics of α-lactalbumin

The purpose of this study was to investigate effect of physical treatment (ultrasound, U/high pressure homogenization, H/combined treatment, UH or HU) and surfactant (Mogroside V, Mog) on air/water interface adsorption and foaming properties of α-lactalbumin (ALa). Firstly, the binding of Mog and all physical-treated ALa was a static quenching process. Mog had the greatest binding affinity for HU-ALa among all treated samples. U or H treatment could change surface hydrophobicity of ALa/Mog complex. Secondly, at the molar ratio (ALa:Mog) of 1:50, foaming ability (FA) of all ALa samples got the maximum. The sequence of FA in ALa and ALa/Mog complex was listed as follow: HU > U > H > UH. Moreover, foaming stability (FS) of HU-ALa was the highest, followed by H-ALa, U-ALa and UH-ALa. Meanwhile, low concentration Mog increased FS of ALa or UH-ALa, but it reduced FS of H-ALa, U-ALa and HU-ALa. Quartz crystal microbalance with dissipation monitoring (QCM-D) experiment indicated that ALa/Mog complex after U or H treatment was quickly absorbed at air/water interface, compared with the treated ALa, and HU-ALa/Mog had the largest frequency shift. In addition, HU-ALa had the thickest bubble membrane and the highest dissipation shift in all samples, indicating that the absorbed membrane thickness and viscoelasticity of samples was correlated with foam stability. Therefore, U and H treatment synergism with Mog was an effective approach to enhance foam properties of ALa, which indicated that HU-treated ALa/Mog complex could be viewed as the safe and efficient foaming agent applied in food processing.

The microbial synergy and response mechanisms of hydrolysis-acidification combined microbial electrolysis cell system with stainless-steel cathode for textile-dyeing wastewater treatment

Microbial electrolysis cell (MEC) has been existing problems such as poor applicability to real wastewater and lack of cost-effective electrode materials in the practical application of refractory wastewater. A hydrolysis-acidification combined MEC system (HAR-MECs) with four inexpensive stainless-steel and conventional carbon cloth cathodes for the treatment of real textile-dyeing wastewater, which was fully evaluated the technical feasibility in terms of parameter optimization, spectral analysis, succession and cooperative/competition effect of microbial. Results showed that the optimum performance was achieved with a 12 h hydraulic retention time (HRT) and an applied voltage of 0.7 V in the HAR-MEC system with a 100 μm aperture stainless-steel mesh cathode (SSM-100 μm), and the associated optimum BOD₅/COD improvement efficiency (74.75 ± 4.32 %) and current density (5.94 ± 0.03 A·m^-2) were increased by 30.36 % and 22.36 % compared to a conventional carbon cloth cathode. The optimal system had effective removal of refractory organics and produced small molecules by electrical stimulation. The HAR segment could greatly alleviate the imbalance between electron donors and electron acceptors in the real refractory wastewater and reduce the treatment difficulty of the MEC segment, while the MEC system improved wastewater biodegradability, amplified the positive and specific interactions between degraders, fermenters and electroactive bacteria due to the substrate complexity. The SSM-100 μm-based system constructed by phylogenetic molecular ecological network (pMEN) exhibited moderate complexity and significantly strong positive correlation between electroactive bacteria and fermenters. It is highly feasible to use HAR-MEC with inexpensive stainless-steel cathode for textile-dyeing wastewater treatment.

A chemosensing approach for the colorimetric and spectroscopic detection of Cr3+, Cu2+, Fe3+, and Gd3+ metal ions

Metal cations are present in domestic and industrial wastewater and have adverse effects on human and aqueous life. The present study describes the development of the molecular probe 9-anthracen-9-ylmethylene)hydrazineylidene)methyl)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-8-ol (AMHMPQ) to detect Cr³⁺, Cu²⁺, Fe³⁺, and Gd³⁺ ions by using UV-visible, fluorescence, colorimetric and excitation-emission matrix (EEM) spectroscopy techniques. The interaction of Cr³⁺, Cu²⁺, Fe³⁺, and Gd³⁺ can be observed by the absorption maxima shift, turn-off, colour changes, and EEM shifts. In addition, fluorescence limits of detection 17.66 × 10^-6 M, 6.44 × 10^-9 M, 28.87 × 10^-8 M, and 12.49 × 10^-6 M in wide linear ranges, low limits of quantifications, high values of Stern-Volmer constant, Job's plot and Benesi-Hildebrand plot justify the 1:1 association affinity with association constants of 1.46 × 10⁴ M^-1, 1.86 × 10⁷ M^-1, 2.69 × 10⁵ M^-1, 2.13 × 10⁴ M^-1 for AMHMPQ-metal ions (Cr³⁺, Cu²⁺, Fe³⁺, and Gd³⁺ ions), respectively. Paper- and mask-based kits are developed to explore the utility of the designed chemosensor. Additionally, AMHMPQ acts as a reusable sensor for two, seven, two, and zero cycles for Cr³⁺, Cu²⁺, Fe³⁺, and Gd³⁺ ions, respectively, when checked with EDTA.

Application of hybrid electrocoagulation and electrooxidation process for treatment of wastewater from the cotton textile industry

The hybrid electrocoagulation-electrooxidation (EC-EO) process was evaluated for its capability to remove color, total organic carbon (TOC), and chemical oxygen demand (COD). Aluminum (Al/Al) and iridium dioxide-coated onto titanium (IrO₂/Ti) electrodes were selected as anode/cathode for EC and EC-EO experiments, respectively. The box-Behnken statistical experimental design was used to optimize different operating conditions of the processes. The selected EC operating parameters are the concentrated dye concentration, applied current density, electrolysis time, and pH. The three chosen operating conditions for hybrid EC- EO processes are applied current density, pH, and electrolysis time. The results were evaluated based on the interaction effects of operating parameters of the treatment methods on the percentage of COD, TOC, and color removal. The EC process achieved 89% color and 76% COD removal rate at the optimum operating conditions. Likewise, the hybrid EC-EO process obtained 97% COD and color removal efficiency. FT-IR and ¹H and ¹³C NMR spectroscopy combined approach was employed to analyze the dye degradation extent. Both analysis results confirm the complete degradation of the organic contaminants into carbon dioxide and water. Thus, this study discloses that the treatment method using mesh IrO₂/Ti electrodes is a promising technology that could reach the discharge limit for industrial effluents. In addition, the optimum operating conditions are tested for real industrial wastewater effluents and show excellent performance in removing pollutants. Furthermore, the treatment method's mineralization study and economic analysis were performed and compared to other studies.

Dissolved organic matter in bovine slaughterhouse wastewater using fluorescence spectroscopy associated with CP/PARAFAC and PCA methods

In this work, we evaluated the potential application of fluorescence spectroscopy, associated with the canonical polyadic/parallel factor analysis and principal component analysis, to monitor the dissolved organic matter (DOM) generated from a slaughterhouse industry. During the monitoring process, we analyzed the residual water at the entrance and exit sites of the slaughterhouse effluent treatment as well as downstream and upstream the effluent receiving water body of a local river. The results revealed that the fluorescence analysis was able to identify proteins, chlorophylls, and humic substances at the entrance and exit sites of the slaughterhouse treatment plant and humic substances at the river water bodies. Our data also demonstrated that the industrial effluent discharged into the river did not impact the receiving water body quality as determined by the biological and humification indices obtained by fluorescence analysis, which was confirmed by conventional physicochemical analysis. In summary, the present findings indicate that fluorescence spectroscopy, in association with multivariate analysis, can be successfully applied as an analytical tool for evaluating the quality of DOM in slaughterhouse wastewater.