Non-targeted analysis for organic components of microplastic leachates

Monitoring Poly(methyl methacrylate) and Polyvinyl Dichloride Micro/Nanoplastics in Water by Direct Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry

A simple, sustainable, and sensitive monitoring approach of micro/nanoplastics (MNPs) in aqueous samples is crucial since it helps in assessing the extent of contamination and understanding the potential risks associated with their presence without causing additional stress to the environment. In this study, a novel strategy for qualitative and quantitative determination of MNPs in water by direct solid-phase microextraction (SPME) coupled with gas chromatography-mass spectrometry (GC-MS) was proposed for the first time. Spherical poly(methyl methacrylate) (PMMA) and irregularly shaped polyvinyl dichloride (PVDC) were used to evaluate the feasibility and performance of the proposed method. The results demonstrated that both PMMA and PVDC MNPs were efficiently extracted by the homemade SPME coating of nitrogen-doped porous carbons (N-SPCs) and exhibited sufficient thermal decomposition in the GC-MS injection port. Excellent extraction performances of N-SPCs coating for MNPs are attributed to hydrophobic cross-linking, electrostatic forcing, hydrogen bonding, and pore trapping. Methyl methacrylate was identified as the marker for PMMA, while 1,3-dichlorobenzene and 1,3,5-trichlorobenzene were the indicators for PVDC. Under the optimal extraction and decomposition conditions, the proposed method exhibited ultrahigh sensitivity, with a limit of detection of 0.0041 μg/L for PMMA and 0.0054 μg/L for PVDC. Notably, a programmed temperature strategy for the GC-MS injector was developed to discriminate and eliminate the potential interferences of intrinsic indicator compounds. Owing to the integration of sampling, extraction, injection, and decomposition into one step by SPME, the proposed method demonstrates exceptional sensitivity, eliminating the necessity for complex sample pretreatment procedures and the use of organic solvents. Finally, the proposed method was successfully applied in the determination of PMMA and PVDC MNPs in real aqueous samples.

Micro- and nanoplastics in agricultural soils: Assessing impacts and navigating mitigation

Micro-/nanoplastic contamination in agricultural soils raises concerns on agroecosystems and poses potential health risks. Some of agricultural soils have received significant amounts of micro-/nanoplastics (MNPs) through plastic mulch film and biosolid applications. However, a comprehensive understanding of the MNP impacts on soils and plants remains elusive. The interaction between soil particles and MNPs is an extremely complex issue due to the different properties and heterogeneity of soils and the diverse characteristics of MNPs. Moreover, MNPs are a class of relatively new anthropogenic pollutants that may negatively affect plants and food. Herein, we presented a comprehensive review of the impacts of MNPs on the properties of soil and the growth of plants. We also discussed different strategies for mitigating or eliminating MNP contamination. Moreover, perspectives for future research on MNP contamination in the agricultural soils are also highlighted.

Tracking Dynamic Chemical Reactivity Networks with High-Resolution Mass Spectrometry: A Case of Microplastic-Derived Dissolved Organic Carbon

Chemical degradation testing often involves monitoring the loss of a chemical or the evolution of a single diagnostic product through time. Here, we demonstrate a novel approach to tracing complex degradation networks using mass-spectrometry-based methods and open cheminformatics tools. Ester- and ether-based thermoplastic polyurethane (TPU_Ester and TPU_Ether) microplastics (350 μm) and microplastics-derived dissolved organic carbon (MP-DOC) were photoweathered in a simulated marine environment and subsequently analyzed by liquid chromatography coupled to high-resolution mass spectrometry. We formula-annotated 1342 and 2344 unique features in the MP-DOC of TPU_Ester and TPU_Ether, respectively. From these, we extracted 199 and 568 plausible parent-transformation product pairs via matching of features (a) with complementary increasing and decreasing trends (Spearman's correlation coefficient between normalized intensity and time), (b) spectral similarities of at least three accurate mass MS2 fragments, and (c) at least 3 ppm agreement between the theoretical and measured change in m/z between the parent-transformation product formula. Molecular network analysis revealed that both chain scission and cross-linking reactions occur dynamically rather than degradation proceeding in a monotonic progression to smaller or more oxygenated structures. Network nodes with the highest degree of centrality were tentatively identified using in silico fragmentation and can be prioritized for toxicity screening or other physicochemical properties of interest. This work has important implications for chemical transformation tracking in complex mixtures and may someday enable improved elucidation of environmental transformation rules (i.e., structure-reactivity relationships) and fate modeling.

Identification of Additives in Disposable Face Masks and Evaluation of Their Toxicity Using Marine Medaka (Oryzias melastigma)

The COVID-19 pandemic has resulted in huge amounts of face masks worldwide. However, there is a lack of awareness on the additives and their potential risk to aquatic ecosystems of face masks. To address this issue, the additives and their toxicity in 13 face masks (e.g., polypropylene, polyethylene, and polylactic acid) were determined using nontarget analysis and bioassays. A total of 826 organic additives including intermediates (14.8%), surfactants (9.3%), plasticizers (8.2%), and antioxidants (6.1%) were tentatively identified, with 213 compounds being assigned confidence levels of 1 and 2. Interestingly, polylactic acid masks contained more additives than most polypropylene or polyethylene masks. Among these additives, the concentration of tris(2-ethylhexyl) phosphate in masks was 9.4-978.2 ng/g with a 100% detection frequency. Furthermore, 13 metals such as zinc (up to 202.0 μg/g), copper (32.5 μg/g), and chromium (up to 5.7 μg/g) were detected in the face masks. The methanol extracts of the masks showed the developmental toxicity, swimming behavior, and/or endocrine disruption in embryos/larvae of Oryzias melastigma. The findings demonstrate that face masks contain various toxic additives to marine medaka, which deserves close attention to pollution by face masks.

Determination of extractable pollutants from microplastics to vegetables: Accumulation and incorporation into the food chain

The presence and impacts of microplastics (MPs) are being extensively researched and reviewed, especially in the marine environment. However, mobility, transportation routes, and accumulation of leaching compounds such as additives in plastic waste including MPs are scarcely studied. Information regarding ecotoxicity and leachability of compounds related to MPs contamination in the environment is limited. Current work presents the levels of leachates from plastic materials in edible-root and non-edible root vegetables. Samples were analyzed by static headspace and gas chromatography-mass spectrometry (SHS-GC-MS) and the presence of 93 putative compounds was accurately monitored in the samples by the usage of Mass Spectrometry-Data Independent Analysis software. The application of chemometrics to the SHS-GC-MS dataset allowed differentiation between the levels of plastic related compounds in edible root and non-edible root vegetables, the former showing a higher content of plastic leachates. For SHS sampling, 3 g of the sample were incubated at 130 °C for 35 min in the HS vial and toluene and naphthalene were added as internal standards for quantification purposes. The developed SHS-GC-MS methodology is straightforward, reliable, and robust and allowed the quantification of sixteen plastic associated compounds in the samples studied in a range from 0.14 to 28800 ng g-1 corresponding to 2,4-di-tert-butylphenol and p,α-dimethylstyrene, respectively. Several of the quantified compounds pointed out to potential contamination of polystyrene and/or polyvinyl chloride MPs.

The disinfectant residues promote the leaching of water contaminants from plastic pipe particles

Disinfection treatment is an indispensable water purification process, but it can leave trace concentrations of disinfectant in the purified water. Disinfectants oxidation can age plastic pipes and release hazardous microplastics and chemicals into drinking water. Lengths of commercially-available unplasticized polyvinyl chloride and polypropylene random copolymer water pipe were ground into particles and exposed to micro-molar concentrations of ClO₂, NaClO, trichloroisocyanuric acid, or O₃ for up to 75 days. The disinfectants aged the plastic and changed its surface morphology and functional groups. Meanwhile, disinfectants could significantly promote the release of organic matter from plastic pipes into the water. ClO₂ generated the highest concentrations of organic matter in the leachates from both plastics. Plasticizers, antioxidants and low molecular weight organic matter were detected in all of the leachates. Leachate samples inhibited the proliferation of CT26 mouse colon cancer and induced oxidative stress in the cells. Even trace concentrations of residual disinfectant can constitute a drinking water risk.

Mass Spectrometry as an Analytical Tool for Detection of Microplastics in the Environment

Plastic particles smaller than 5 mm accumulate in aqueous, terrestrial, and atmospheric environments and their discovery has been a serious concern when it comes to eco-toxicology and human health risk assessment. In the following review, the potential of mass spectrometry (MS) for the detection of microplastic (MP) pollutants has been elaborately reviewed. The use of various mass spectrometric techniques ranging from gas chromatography–mass spectrometry (GC-MS), liquid chromatographic mass spectrometric (LC-MS) to matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS), including their variants, have been reviewed. The lapses in the detection system have been addressed and future recommendations proposed. The challenges facing microplastics and their detection have been discussed and future directions, including mitigation methods, have been presented.