Physicochemical change and microparticle release from disposable gloves in the aqueous environment impacted by accelerated weathering

Innovations and development of sustainable personal protective equipment: a path to a greener future

The unprecedented surge in the demand for personal protective equipment (PPE) worldwide during the covid pandemic resulted in a significant increase in PPE consumption and subsequent waste generation. Despite the importance of PPE, its widespread usage and disposal have sparked worries about the environmental impact and its long-term sustainability. The increasing awareness of environmental challenges, resource scarcity, and the urgent need to mitigate climate change necessitates a paradigm shift in the product design, manufacturing process, and waste management of PPE. To address these challenges and have a sustainable PPE future, the development of degradable polymers and natural fibers offers a promising alternative to traditional plastics. Additionally, recycling and upcycling methods can convert the waste into valuable alternate products or energy sources, thereby reducing their environmental impact. Better waste management systems, comprehensive policy frameworks, and international collaborations are essential for the effective PPE waste management and the promotion of sustainable practices. Despite the challenges, collaborative efforts across governments, manufacturers, research institutions, and waste management authorities are crucial for transitioning to a more sustainable PPE industry and a circular economy, ultimately benefiting both the environment and society.

Effects of polystyrene nanoplastics on growth and hemolysin production of microalgae Karlodinium veneficum

There are few studies on the effects of nanoplastics on growth and hemolysin production of harmful algal bloom species at present. In this study, Karlodinium veneficum was exposed to different concentrations (0, 5, 25, 50, 75 mg/L) of polystyrene nanoplastics (PS-NPs, 100 nm) for 96 h. The effects of PS-NPs on growth of K. veneficum were investigated by measuring algal cell abundance, growth inhibition rate (IR), total protein (TP), malondialdehyde (MDA), glutathione reductase (GSH), superoxide dismutase (SOD), ATPase activity (Na+/K+ ATPase and Ca2+/Mg2+ ATPase). Scanning electron microscope and transmission electron microscope (SEM and TEM) images of microalgae with or without nanoplastics were also observed. The effects of PS-NPs on hemolysin production of K. veneficum were studied by measuring the changes of hemolytic toxin production of K. veneficum exposed to PS-NPs on 1, 3, 5 and 7 days. High concentrations (50 and 75 mg/L) of PS-NPs seriously affected the growth of K. veneficum and different degrees of damage to cell morphology and ultrastructure were found. Excessive free radicals and other oxidants were produced in the cells, which disrupted the intracellular redox balance state and caused oxidative damage to the cells, and the basic activities such as photosynthesis and energy metabolism were weakened. The athletic ability of K. veneficum was decreased, but the ability to produce hemolysin was enhanced. It was suggested that the presence of nanoplastics in seawater may strengthen the threat of harmful algal bloom species to aquatic ecosystems and human health.

An insight into the benefits of substituting polypropylene with biodegradable polylactic acid face masks for combating environmental emissions

Mask waste can affect the natural environment and human health. In this study, the life cycle assessment (LCA) of two types of face masks (Polylactic acid (PLA) and Polypropylene (PP)) was first performed to evaluate the environmental impacts from production to end-of-life, and then, greenhouse gas (GHG) emissions were estimated for each life stage. The GHG emissions for one functional unit of PP and PLA face masks were estimated to be 6.27E+07 and 5.06E+07 kg CO2 eq, respectively. Explicitly, PLA mask production emissions are 37 % lower as compared to those for PP masks. Packaging has been recognized as a major GHG source throughout the product's life cycle. This study may provide a new insight into the environmental benefits of reducing GHG emissions within PLA face mask life cycles. Biodegradable and environmentally friendly materials can be used in the manufacturing and packaging of face masks.

Micro- and nanoplastics (MNPs) and their potential toxicological outcomes: State of science, knowledge gaps and research needs

Plastic waste has been produced at a rapidly growing rate over the past several decades. The environmental impacts of plastic waste on marine and terrestrial ecosystems have been recognized for years. Recently, researchers found that micro- and nanoplastics (MNPs), micron (100 nm - 5 mm) and nanometer (1 - 100 nm) scale particles and fibers produced by degradation and fragmentation of plastic waste in the environment, have become an important emerging environmental and food chain contaminant with uncertain consequences for human health. This review provides a comprehensive summary of recent findings from studies of potential toxicity and adverse health impacts of MNPs in terrestrial mammals, including studies in both in vitro cellular and in vivo mammalian models. Also reviewed here are recently released biomonitoring studies that have characterized the bioaccumulation, biodistribution, and excretion of MNPs in humans. The majority MNPs in the environment to which humans are most likely to be exposed, are of irregular shapes, varied sizes, and mixed compositions, and are defined as secondary MNPs. However, the MNPs used in most toxicity studies to date were commercially available primary MNPs of polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and other polymers. The emerging in vitro and in vivo evidence reviewed here suggests that MNP toxicity and bioactivity are largely determined by MNP particle physico-chemical characteristics, including size, shape, polymer type, and surface properties. For human exposure, MNPs have been identified in human blood, urine, feces, and placenta, which pose potential health risks. The evidence to date suggests that the mechanisms underlying MNP toxicity at the cellular level are primarily driven by oxidative stress. Nonetheless, large knowledge gaps in our understanding of MNP toxicity and the potential health impacts of MNP exposures still exist and much further study is needed to bridge those gaps. This includes human population exposure studies to determine the environmentally relevant MNP polymers and exposure concentrations and durations for toxicity studies, as well as toxicity studies employing environmentally relevant MNPs, with surface chemistries and other physico-chemical properties consistent with MNP particles in the environment. It is especially important to obtain comprehensive toxicological data for these MNPs to understand the range and extent of potential adverse impacts of microplastic pollutants on humans and other organisms.

Microplastic pollution and associated health hazards: Impact of COVID-19 pandemic

The COVID-19 pandemic led to an increase in plastic used for medical purposes such as personal protective equipment and packaging materials. A very low share of plastics is recycled while the majority is sent to landfills. This plastic may degrade over time to form microplastics which may pollute land, air, and water sources. An increase in microplastics can increase the disease risk in human well-being's. The ultimate fate of microplastic is accumulation inside the human body posing the risk of different health conditions like cancer, diabetes, and allergic reactions. Hence, proper detection and disposal methods should be devised to deal with the rise in microplastic pollution.

Tide-induced infiltration and resuspension of microplastics in shorelines: Insights from tidal tank experiments

In the present study, the infiltration and resuspension of microplastics (MPs) in a slope substrate under the influence of repeated tidal forces were investigated using a tidal tank. In the scenario in which MPs were placed on the top of the slope, increasing numbers of particles were observed on the water surface with the increase in tidal cycles. More particles of smaller equivalent particle diameter (d_MP) and low density floated to the water surface. The horizontal positions (positive toward the lower tide zone) of MPs showed significant positive correlation with the shortest length c of MPs, MP density, MP weight, d_MP, and Corey shape factor, whereas they showed significant negative correlation with the rate of tidal level change and the longest length a of MPs. The vertical positions (positive in the downward direction) of MPs showed significant positive correlation with the shortest length c of MPs, MP density, MP weight, d_MP, and Corey shape factor, while they demonstrated significant negative correlation with the largest cross-section area and surface tension of MPs. In the scenario in which MPs were placed at the bottom of the tank, the smaller and low-density particles had a higher possibility of moving upward to the water surface under repeated tidal forces. High-density particles also migrated to the water surface due to the surface tension force. Further, a lower rate of tidal level change contributed to more floating of particles. The horizontal positions of MPs showed significant positive correlation with MP density, while they demonstrated significant negative correlation with the largest cross-section area and surface tension of MPs. The vertical positions of MPs showed significant positive correlation with the longest length a of MPs, MP density, MP weight, and d_MP. These results imply that large, high-density, and less flatty particles tend to be distributed in the lower tidal zone and deeper substrate layers. These findings can help understand the redistribution of MPs and assess their risk in the shoreline environment.

Biodegradation of vulcanized rubber by a gut bacterium from plastic-eating mealworms

The disposal of vulcanized rubber waste is difficult due to the presence of three-dimensional crosslinking network structure. Here, we report that a bacterium Acinetobacter sp. BIT-H3, isolated from the gut of plastic-eating mealworm, can grow on and degrade vulcanized poly(cis-1,4-isoprene) rubber (vPR). Scanning electronic microscopy (SEM) shows that strain BIT-H3 can penetrate into the vPR and produce craters and cracks. The tensile strength and the crosslink density of vPR decreased by 53.2% and 29.3% after ten weeks' incubation, respectively. The results of Horikx analysis, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and X-ray absorption near-edge structure (XANES) spectroscopy reveal that strain BIT-H3 can break down both sulfide bridges and double bonds of polymeric backbone within vPR. Sulfate and oligo(cis-1,4 isoprene) with terminal aldehyde and keto groups were identified as metabolic products released during vPR degradation. Through genomic and transcriptional analyses, five enzymes of dszA, dszC1, dszC2, Laccase2147, and Peroxidase1232 were found to be responsible for vPR degradation. Based on the chemical structure characterizations and molecular analyses, a vPR biodegradation pathway was proposed for strain BIT-H3. These findings pave a way for exploiting vulcanized rubber-degrading microorganisms from insect gut and contribute to establish a biodegradation method for vulcanized rubber waste disposal.

An investigation into the aging of disposable face masks in landfill leachate

Due to the excessive use of disposable face masks during the COVID-19 pandemic, their accumulation has posed a great threat to the environment. In this study, we explored the fate of masks after being disposed in landfill. We simulated the possible process that masks would experience, including the exposure to sunlight before being covered and the contact with landfill leachate. After exposure to UV radiation, all three mask layers exhibited abrasions and fractures on the surface and became unstable with the increased UV radiation duration showed aging process. The alterations in chemical groups of masks as well as the lower mechanical strength of masks after UV weathering were detected to prove the happened aging process. Then it was found that the aging of masks in landfill leachate was further accelerated compared to these processes occurring in deionized water. Furthermore, the carbonyl index and isotacticity of the mask samples after aging for 30 days in leachate were higher than those of pristine materials, especially for those endured longer UV radiation. Similarly, the weight and tensile strength of the aged masks were also found lower than the original samples. Masks were likely to release more microparticles and high concentration of metal elements into leachate than deionized water after UV radiation and aging. After being exposed to UV radiation for 48 h, the concentration of released particles in leachate was 39.45 μL/L after 1 day and then grew to 309.45 μL/L after 30 days of aging. Seven elements (Al, Cr, Cu, Zn, Cd, Sb and Pb) were detected in leachate and the concentration of this metal elements increased with the longer aging time. The findings of this study can advance our understanding of the fate of disposable masks in the landfill and develop the strategy to address this challenge in waste management.

Entrainment and Enrichment of Microplastics in Ice Formation Processes: Implications for the Transport of Microplastics in Cold Regions

Sea ice can serve as a temporary sink for microplastics (MPs), and thus, it too can function as a secondary source of and transport medium for MPs. This study aimed to explore the effect of various MP properties and environmental characteristics on the entrainment and enrichment of MPs in ice under varying turbulence conditions. It was found that high rotation speed in freshwater distinctively enhanced the entrainment of hydrophobic MPs in ice, this being attributable to the combined effects of frazil ice and air bubbles. The hydrophobic nature of these MPs caused them to be attracted to the water/air or water/ice interface. However, in saline water, high turbulence inhibited the entrainment of all of the MP types under study. The ice crystals formed a loose structure in saline water instead of congealing, and this allowed the exchange of MPs between ice and water, leading to the rapid expulsion of MPs from the ice. The enrichment factors of all the MPs under study increased in calm saline water compared to in calm freshwater. The results revealed that the entrainment and enrichment of MPs in ice can be critical pathways affecting their fate in cold regions.

New Perspective on the Mobilization of Microplastics through Capillary Fringe Fluctuation in a Tidal Aquifer Environment

The presence of plastic fragments in the environment is a growing global concern. In this study, we explored the effects of dynamic fluctuations of capillary fringe on the transport of microplastics (MPs) in the substrate combining various environmental and MP properties. Both experimental and Hydrus-2D modeling results confirmed that increasing cycles of water table fluctuation led to the rise of capillary fringe. An increase in the cycles of water table fluctuations did not significantly change the overall MP retention percentages in 0.5 mm substrate but altered the MP distribution along the column. In 1 and 2 mm substrate, the increase in cycle numbers enhanced the MP transport from substrate to the water below. In terms of the size of the MPs, more 20-25 μm polyethylene (PE2) were retained in the substrate compared to 4-6 μm polyethylene (PE1) under the same number of fluctuation cycles. High-density polytetrafluoroethylene (PTFE, 5-6 μm) exhibited higher retention percentages compared to PE1 particles. Ultraviolet aging for 60 days enhanced PE1 transport along the column, while 60 days of seawater aging did not affect PE1 transport greatly. For PTFE, ultraviolet and seawater aging enhanced its retention in the substrate. The retention percentages of both PE1 and PTFE in the column increased with the elevated ionic strength and the decrease of fluctuation velocity. This work highlights that capillary fringe fluctuation can serve as a pathway to relocate MPs to the tidal aquifer.

Personal protective equipment (PPE) pollution driven by COVID-19 pandemic in Marina Beach, the longest urban beach in Asia: Abundance, distribution, and analytical characterization

COVID-19 pandemic has enforced the use of personal protective equipment (PPE, masks and gloves). However, the mismanagement of litter are exacerbating the increasing plastic issue worldwide. In the present study, we sampled discarded PPE in 10 sites along Marina Beach, India. We characterized the litter types by chemical analysis techniques. A total of 1154 COVID-19-associated PPE items were found on Marina beach. The highest number of items were face masks (97.9 %) and the mean PPE density in the sites studied was 4 × 10^-3 PPE m^-2. The results demonstrate that poor solid waste management and lack of awareness are the main causes of pollution at Marina beach. FTIR spectroscopy revealed that face masks and gloves were principally made of polypropylene and latex, respectively. The FTIR spectra also showed signs of chemical degradation. Our results suggest that plastic pollution is increasing, possibly becoming more impactful to marine biota. Beach management measures were discussed.

Fire releases micro- and nanoplastics: Raman imaging on burned disposable gloves

Raman imaging can effectively characterise microplastics and nanoplastics, which is validated here to capture the items released from the plastic gloves when subjected to a mimicked fire. During the COVID-19 pandemic, large quantities of personal protective equipment (PPE) units have been used, such as the disposable gloves. If discarded and poorly managed, plastics gloves might break down to release secondary contaminants. The breakdown process can be accelerated by burning in a bushfire or at the incineration plants. During the burning process, the functional groups on the surface can be burned differently due to their different thermal stabilities. The different degrees of burning can be distinguished and visualised via Raman imaging. In the meantime, at the bottom of the burned plastics, microplastics and nanoplastics can be generated at a significant amount. The possible false Raman imaging on microplastics and nanoplastics is also discussed, by effectively extracting and distinguishing the weak signal from the background or noise. Overall, these findings confirm the importance of effectively working waste incineration plants and litter prevention, and suggest that Raman imaging is a suitable approach to characterise microplastics and nanoplastics.

Aggregation of microplastics and clay particles in the nearshore environment: Characteristics, influencing factors, and implications

Since nearly half of the world's population lives near the coast, coastal areas have become hotspots for microplastic (MP) pollution due to human activity. The ubiquity of natural colloids in coastal waters plays a critical role in the potential fate of, and risks posed by, MPs. Nevertheless, far less has been known regarding the aggregation of MPs with inorganic natural clay colloids, especially in the complicated nearshore environment. In this study, the aggregation behavior of MPs as well as the interaction between MPs and clay particles were investigated under different nearshore environmental conditions (MP-to-clay ratio, salinity gradient, humic acid concentration, and wave energy). The aggregation behavior was subjected by the repulsive energy barrier between particles and external energy transferred to the system. The low energy associated with mild wave conditions was favorable for the occurrence of aggregation, whereas sustained high energy under intense wave conditions was found to be detrimental to the aggregation behavior, and the aggregates were prone to fragmentation even if particles coalesced into large clusters. The analysis for the environmental fate of MPs demonstrated that the shoreline was likely to be the sink for most MPs ultimately.

Exploring the characteristics, performance, and mechanisms of a magnetic-mediated washing fluid for the cleanup of oiled beach sand

In the present study, an innovative, environmentally benign recyclable, and magnetically mediated surface washing fluid based on water-dispersible magnetite nanoparticles has been designed and investigated for the cleanup of oiled beach sand. The characterization results showed that the as-prepared magnetite nanoparticles had a spherical morphology with an average diameter of around 250 nm and the particle surface was successfully functionalized with carboxyl groups. The magnetite nanoparticles could be easily re-dispersed by lightly shaking the dispersion after withdrawing the magnet. In addition, prolonging the magnetic field strength and response time promoted the oil recovery from the washing effluent. Thermodynamic modeling was applied to theoretically elucidate the mechanism and the results were in alignment with the experimental findings. Four mechanisms were identified to likely affect surface washing performance. The magnetic fluid had a relatively low operation cost and good reusability for a number of multiple cycles. In terms of other operational limitations, it was noted that washing performance declined as clay (kaolinite) concentrations and salinity values increased. Based on these findings, the proposed stable, low-cost magnetite fluid formulation warrants further investigation as the basis for an operational system for the cleanup of sand beaches contaminated by oil spills.

Exploring the effects of substrate mineral fines on oil translocation in the shoreline environment: Experimental analysis, numerical simulation, and implications for spill response

Mineral fines act a pivotal part in determining the fate and behavior of oil. In this study, the infiltrations of oil emulsion in simulated sediments and natural shoreline sediments were investigated using a fixed bed experiment. Oil infiltration process was simulated based on fixed-bed dispersion model. The role of mineral fines in oil release was explored using simulated and natural sediments. Although mineral fines exhibited a higher affinity for oil, it was found that increasing fines fractions decreased the flow rate of oil emulsion, thereby decreasing the oil retention in the sediment column. In terms of oil release from the sediment, the highest level of oil mass was observed in the oil-mineral flocculation phase compared to the water column and the water surface compartments. Compared to light crude oil, the release of engine oil from sediment was less. The effects of mineral fines on oil infiltration and release were also confirmed by using natural shoreline sediments. Results of our detailed field studies also showed that current shoreline classification datasets do not characterize the presence and fraction of mineral fines at a level of detail required to accurately predict the significance of oil translocation following spill incidents.

Personal protective equipment (PPE) pollution driven by the COVID-19 pandemic in coastal environment, Southeast Coast of India

The rise in the use of single-use plastics and personal protective equipment (PPE) has increased plastic waste in the marine environment. In this study, we surveyed the presence of PPE (face masks and gloves) discharged in 6 beaches along the coast of India. A total of 496 PPE were counted with an average density of 1.08 × 10-3 PPE m-2. The PPE density found was comparable to previous studies. Face masks were the most recorded type of PPE (98.39%), with gloves accounting for only 1.61% of the total. However, a significant reduction in the appearance of PPE was recorded on all six beaches, likely due to the increase in vaccination rates. The most contaminated places were the beaches with recreational activities + fishing. It has been noticed that the lack of awareness of environmental pollution and the negligence of the population and the mismanagement of municipal waste are the main causes of beach pollution by PPE. This study confirms the potential threat of PPE to terrestrial and aquatic organisms of multiple taxa in India, but further studies are needed to quantify the impact of this type of waste on marine animals.