Mechanism and performance of algal pond assisted constructed wetlands for wastewater polishing and nutrient recovery

Recovery capacity of constructed wetlands in response to multiple disturbances: Microbial interaction perspective

Previous studies have predominantly explored the response mechanisms of constructed wetlands (CWs) to singular disturbances. In practical applications, CWs are frequently subject to multiple disturbances, resulting in complex interference mechanisms. Therefore, this study aims to select harmful algal blooms and microalga ZM-5 as disturbances to investigate the response mechanisms of CWs. Results revealed a dynamic pattern in COD removal efficiency of CWs, with fluctuations at 39.0 ± 6.2 % and 80.1 ± 4.7 % during the disturbances, followed by a recovery to approximately 65.7 ± 3.2 %. Additionally, the CWs exhibited a capacity for self-recovery and enhanced stability by selectively promoting specific microbial communities through the regulation of the genes responsible for indole-3-acetic acid (IAA) and vitamin production. Importantly, this study underscored the establishment of a resilient microbial community structure within CWs following multiple disturbances, characterized by a more interconnected microbial network. These findings shed light on the adaptive mechanisms of CWs in the face of complex environmental challenges.

Algae-constructed wetland integrated system for wastewater treatment: A review

Integrating algae into constructed wetlands (CWs) enhances wastewater treatment, although the results vary. This review evaluates the role of algae in CWs and the performance of different algae-CW (A-CW) configurations based on literature and meta-analysis. Algae considerably improve N removal, although their impact on other parameters varies. Statistical analysis revealed that 70 % of studies report improved treatment efficiencies with A-CWs, achieving average removal rates of 75 % for chemical oxygen demand (COD), 74 % for total nitrogen and ammonium nitrogen, and 79 % for total phosphorus (TP). This review identifies hydraulic retention times, which average 3.1 days, and their varied impact on treatment efficacy. Mixed-effects models showed a slight increase in COD and TP removal efficiencies of 0.6 % every ten days in the A-CWs. Future research should focus on robust experimental designs, adequate algal storage and separation techniques, and advanced modeling to optimize the treatment potential of algae in CWs.

Microalgae-based constructed wetland system enhances nitrogen removal and reduce carbon emissions: Performance and mechanisms

Combination of constructed wetlands (CWs) and microalgae-based technologies has been proved as effective wastewater treatment option; however, little attention was paid to investigate the optimal combination ways. This study showed that the integrated system (IS) connecting microalgal pond with CWs exhibited improved pollutant-removal efficiencies and preferred carbon reduction effects compared to other alternatives such as coupled system or independent CWs. Microbial analysis demonstrated that core microorganisms (e.g., Acinetobacter and Thermomonas) of the IS were mostly associated with carbon, nitrogen, and energy metabolism. Based on co-occurrence networks, microbial quantity with denitrification function in the IS accounted for 71.01 % of the microorganism related to nitrogen metabolism, which was higher than that of 48.84 % in the independent CWs, indicating that the presence of microalgae in IS played important role in promoting biological denitrification. These findings provide insights into the microbial mechanism and highlights the complementary effects between microalgae and CWs.

Exploring the resilience of constructed wetlands to harmful algal blooms disturbances: A study on microbial response mechanisms

Constructed wetlands (CWs) have emerged as a promising environmentally sustainable technique for wastewater treatment. However, the susceptibility of CWs to disturbances caused by harmful algal blooms (HABs) raises concerns. This study aimed to investigate the impact of HABs on the pollutants' removal performance of CWs and the response of rhizosphere microbial community. Results revealed that CWs possessed an adaptive capacity that enabled them to recover caused by HABs. The rhizosphere was found to stimulate the occurrence of Acinetobacter, which played a critical role to help resist HABs disturbance. This study also observed an increased dissimilatory nitrate reduction metabolic pathway which promoted denitrification and enhanced the nitrogen removal efficiency of CWs. Additionally, the structural equation model further suggested that dissolved oxygen exerted a significant influence on the microbial activities and then affected the pollutants removal performance. Overall, our findings shed light on the mechanism for CW stability maintenance during HABs disturbance.

Study on adsorption and recovery utilization of phosphorus using alkali melting-hydrothermal treated oil-based drilling cutting ash

Oil-based drill cutting ash (OBDCA) was treated by alkali melting-hydrothermal method and used as novel adsorbent (AM-HT-OBDCA) for the recovery of phosphorus (P) in water body. The experiment parameter for preparation of AM-HT-OBDCA was optimized, including alkali melting ratio (M_OBDCA: M_NaOH), alkali melting temperature and hydrothermal temperature. The adsorption process of phosphorus on AM-HT-OBDCA was fit well with the pseudo-second-order model and the Langmuir model. The calculated theoretic adsorption capacity of phosphorus on AM-HT-OBDCA was 62.9 mg/g. The adsorption behavior was spontaneous and endothermic. The effect of pH value and interfering ions on the adsorption of phosphorus in AM-HT-OBDCA was investigated. The main existing form of adsorbed phosphorus on AM-HT-OBDCA was sodium hydroxide extraction form phosphorus (NaOH-P), including iron form phosphorus (Fe-P) and aluminum form phosphorus (Al-P). Precipitation and ligand exchange were the main mechanisms of phosphorus adsorption on AM-HT-OBDCA. The AM-HT-OBDCA used for phosphorus adsorption (AM-HT-OBDCA-P) could be further utilized as fertilizer to promote plant growth. The results of this study provide fundamental data and evaluation support for resource utilization of OBDCA. These results will also provide a reference for the adsorption and recovery utilization of phosphorus using solid waste-based adsorbent.

Succession dynamics of microbial communities responding to the exogenous microalgae ZM-5 and analysis of the environmental sustainability of a constructed wetland system

Constructed wetlands (CWs) are economical and effective swine tailwater treatment systems. However, nitrogen removal in CWs is limited by the lack of carbon source for denitrification. In this study, we studied the feasibility of dosing the microalgae ZM-5 to improve the nitrogen removal ability in CWs. Compared to the control CW, a 20 % higher removal capacity of COD and TN was observed for the coupled system (EG). The microalgae ZM-5 could interact with denitrifying bacteria to compensate for the deficiency of denitrifying stage in CWs. HT-qPCR chip analysis also provided evidence that denitrification genes significantly increased (p < 0.05). According to the life cycle assessment (LCA), ultrasonic extraction had the best environmental sustainability among four lipid extraction processes. As an improvement strategy, clean energy could be utilized to optimize the electricity source to reduce environmental load (45 %-60 %). These findings offer new insights into the feasibility of EG for environmentally sustainable wastewater treatment.

Mechanisms and application of microalgae on removing emerging contaminants from wastewater: A review

This study reviews the development of the ability of microalgae to remove emerging contaminants (ECs) from wastewater. Contaminant removal by microalgae-based systems (MBSs) includes biosorption, bioaccumulation, biodegradation, photolysis, hydrolysis, and volatilization. Usually, the existence of ECs can inhibit microalgae growth and reduce their removal ability. Therefore, three methods (acclimation, co-metabolism, and algal-bacterial consortia) are proposed in this paper to improve the removal performance of ECs by microalgae. Finally, due to the high removal performance of contaminants from wastewater by algal-bacterial consortia systems, three kinds of algal-bacterial consortia applications (algal-bacterial activatedsludge, algal-bacterial biofilm reactor, and algal-bacterial constructed wetland system) are recommended in this paper. These applications are promising for ECs removal. But most of them are still in their infancy, and limited research has been conducted on operational mechanisms and removal processes. Extra research is needed to clarify the applicability and cost-effectiveness of hybrid processes.