Inhibition of humic acid on copper pollution caused by chalcopyrite biooxidation

Utilization of Algal Biochar for Biopassivation of Copper Sulfide Tailings to Reduce Acid Mine Drainage

Acid mine drainage (AMD) has serious impacts on the environment. To inhibit the generation of AMD from copper sulfide tailings at the source, in this paper, a strategy is developed for promoting the biopassivation of copper sulfide tailings using algal biochar, and the effects of the pyrolysis temperature and concentration of algal biochar on the passivation efficiency and stability are investigated. The results reveal that the introduction of algal biochar during the biopassivation of copper sulfide tailings significantly enhances the tailings passivation effect of the tested Acidithiobacillus ferrooxidans strain and greatly stabilizes the formed passivation layer. Algal biochar prepared with a pyrolysis temperature of 300 °C and applied at a concentration of 6 g/L not only optimizes biopassivation but also significantly improves the stability of the passivation layer. The complex mechanisms of algal biochar in this system include regulating the pH and oxidation‒reduction potential of the reaction system, effectively adsorbing microbial cells, efficiently aggregating metal cations in solution, stimulating the synthesis of extracellular polymeric substances, and accelerating electron transfer. This research offers a novel method for the benign treatment of copper sulfide tailings and resource utilization of algae.

Insight into the effect of potassium amyl xanthate on copper pollution caused by chalcopyrite bio-dissolution

Chalcopyrite has evolved into a crucial source of copper pollution, and xanthates inevitably coexisted with chalcopyrite in mine environments. However, the effect of xanthate on chalcopyrite bio-dissolution has not been illustrated yet. To fill this knowledge gap, the effect of potassium amyl xanthate (KAX) on copper release from chalcopyrite mediated by Acidithiobacillus ferrooxidans was investigated. The results revealed that KAX promoted chalcopyrite bio-dissolution, indicating more copper ions were released into the environment under these circumstances. KAX treatment groups displayed a lag period in ferrous ion oxidation, thereby providing a more favorable redox potential for chalcopyrite bio-dissolution. Bacterial adsorption experiments indicated the number of free cells increased with the addition of KAX, hence the Fe3+ regeneration was accelerated. Elemental composition analyses indicated the addition of KAX was conducive to reducing the formation of passivation substance (Sn2-/S0). Additionally, the reduced surface tension of solution in KAX treatment groups was beneficial for the oxidant diffusing into the pores and cracks of chalcopyrite. This study provided a better comprehension of the effect of xanthate on copper pollution caused by chalcopyrite bio-dissolution, as well as a step toward better guidance in preventing copper pollution at source.

A novelty strategy for AMD prevention by biogas slurry: Acetate acid inhibition effect on chalcopyrite biooxidation and leachate

With the widespread application of anaerobic digestion technology, biogas slurry become the main source of organic amendments in practice. Comprehensive studies into the inhibitory effects of low molecular weight (LMW) organic acids, essential components in biogas slurry, on the sulfide minerals biooxidation and its bioleaching (AMD) have been lacking. In this study, acetic acid (AA) served as a representative of LMW organic acids in biogas slurry to investigate its impact on the inhibition of chalcopyrite biooxidation by Acidithiobacillus ferrooxidans (A. ferrooxidans). It was shown that AA could slow down the chalcopyrite biooxidation and inhibit the jarosite formation on the mineral surface. Compared with the control group (0 ppm AA), the sulfate increment in the leachate of the 50 ppm, 100 ppm, and 200 ppm AA-treated groups decreased by 36.4%, 66.8%, and 69.0%, respectively. AA treatment (≥50 ppm) could reduce the oxidation of ferrous ions in the leachate by one order of magnitude. At the same time, the bacterial concentration of the leachate in the 50 ppm, 100 ppm, and 200 ppm AA-treated groups decreased by 70%, 93%, and 94%, respectively. These findings provide a scientific basis for new strategies to utilize biogas slurry for mine remediation and contribute to an enhanced comprehension of organic amendments to prevent AMD in situ in mining soil remediation.

Design and preparation of reticular superabsorbent hydrogel material with nutrient slow-release and high shear strength for ecological remediation of abandoned mines with steep slopes

In order to solve ecological remediation issues for abandoned mines with steep slopes, a kind of hydrogels with high cohesion and water-retaining were designed by inorganic mineral skeleton combining with polymeric organic network cavities. This eco-friendly hydrogel (MFA/HA-g-p(AA-co-AM)) was prepared with acrylic acid (AA)-acrylamide (AM) as network, which was grafted with humic acids (HA) as network binding point reinforcement skeleton and polar functional group donors, KOH-modified fly ash (MFA) as internal supporter. The maximum water absorption capacities were 1960 g/g for distilled water, which followed the pseudo-second-order model. This super water absorption was attributed to the first stage of 62 % fast absorption due to the high specific surface area, pore volume and low osmotic pressure, moreover, the multiple hydrophilic functional groups and network structure swell contributed to 36 % of the second stage slow adsorption. In addition, the pore filling of water in mesoporous channels contributed the additional 2 % water retention on the third stage. The high saline-alkali resistance correlated with the electrostatic attraction with MFA and multiple interactions with oxygen-containing functional groups in organic components. MFA and HA also enhanced the shear strength and fertility retention properties. After 5 cycles of natural dehydration and reabsorption process, these excellent characteristics of reusability and water absorption capacity kept above 97 %. The application of 0.6 wt% MFA/HA-g-p(AA-co-AM) at 15° slope could improve the growth of ryegrass by approximately 45 %. This study provides an efficient and economic superabsorbent material for ecological restoration of abandoned mines with steep slopes.

Application of Cu isotopes to identify Cu sources in soils impacted by multiple anthropogenic activities

Copper (Cu) is an important micronutrient for animals and plants, but it is toxic at high concentrations in soil. Soils adjacent to industrial areas would be subjected to severe Cu pollution. Identifying Cu sources in the surface environment is crucial for understanding their pollution level and fate. This study investigated Cu content, isotope composition of topsoils, and two soil profiles with varying levels of Cu contamination and related potential Cu sources in southwest China. The difference in Cu isotope compositions of tailing (1.29 ± 0.08 ‰), smelting fly ash (0.04 ± 0.03 ‰), coal (2.44 ± 0.09 ‰), coal-burning fly ash (0.34 ± 0.03 ‰), and geogenic soil (0.10 ± 0.03 ‰) enabled us to distinguish anthropogenic Cu from geogenic Cu. The plot of δ65Cu and 1/Cu demonstrates that Cu of the polluted soils was from three end-members: the smelting fly ash, the vehicle exhaust, and the background soils. Based on the mass balance model, we calculated that the fly ash from smelting was the major anthropogenic source, contributing approximately 29 % of Cu contamination in soils, and the diesel exhaust was another important source, with a contribution rate of approximately 25 %. Additionally, soil profile results suggest that anthropogenic Cu could transport through soil profiles and influence Cu content and isotope signatures of subsurface soils, at least to a depth of ∼60 cm. Finally, our research indicates that Cu isotopes could be a promising tool for tracing industrial pollution, as significant Cu isotope fractionation would occur during the smelting process. Our research highlights the contribution of smelting and diesel exhaust to Cu contamination in the soils in a representative mining area. These findings serve as a scientific foundation for the development of policy for pollution control in industrial-affected regions.

Synthesis of innovative and sustainable gelatin@graphene oxide-crosslinked-zirconium silicate@gelatin nanobiosorbent for effective biosorption of basic fuchsin dye

Most dye stuffs and coloring materials are mainly categorized as hazardous pollutants in water effluents due to their nature as non-biodegradable, highly toxic and extremely carcinogenic. For this reason, rapid and efficient eradication of waste dyes from wastewaters before discharging into water streams must be accomplished by an acceptable approach as adsorption technique. Therefore, the present study is aimed and devoted to synthesize a novel nanobiosorbent from three different constituents, gelatin (Gel) as a sustainable natural product, graphene oxide (GO) as an example of highly stable carbonaceous material and zirconium silicate (ZrSiO₄) as an example of combined metal oxides for the formation of Gel@GO-F-ZrSiO₄@Gel by using formaldehyde (F) as a cross-linkage reagent. Several characterization techniques as FT-IR were employed to identify the incorporated surface reactive Functionalities in Gel@GO-F-ZrSiO₄@Gel as -OH, =NH, -NH₂, -COOH and C=O, etc. The morphology for particle shape and size of Gel@GO-F-ZrSiO₄@Gel were confirmed from the SEM and TEM analyses providing 15.75- 32.79 nm. The surface area was determined by the BET and found to correspond to 219.46 m² g^-1. Biosorptive removal of basic fuchsin (BF) pollutant as an example of a widely applicable dye in various activities was monitored and optimized under the influence of pH (2-10), reaction time (1-30 min), initial BF pollutant concentration (5-100 mg L^-1), nanobiosorbent dosage (5-60 mg), temperature (30-60 °C) and interfering ions. The maximum biosorptive removal values of BF dye were established as 96.0 and 95.2% using 5 and 10 mg L^-1, respectively at the recommended pH 7 condition. The Thermodynamic parameters demonstrated that the BF dye adsorption onto Gel@GO-F-ZrSiO₄@Gel was taken place via spontaneous and endothermic reaction. Chemisorption is the predominant adsorption mechanism by forming multilayers upon nonhomogeneous surface in accordance with Freundlich model hypothesis. The applicability of the optimized Gel@GO-F-ZrSiO₄@Gel in biosorptive removal of BF pollutant from real water sample was successfully accomplished by the batch technique. Thus, this study clearly shows that Gel@GO-F-ZrSiO₄@Gel exhibited significant influences on remediation of industrial effluents containing BF pollutant with superior efficiency.

A Novel Adsorbent of Attapulgite & Carbon Composites Derived from Spent Bleaching Earth for Synergistic Removal of Copper and Tetracycline in Water

Simultaneously eliminating tetracycline (TC) and copper (Cu-II) from wastewater was investigated by applying a novel adsorbent fabricated by transforming spent bleaching earth (SBE) into attapulgite & carbon composites (A&Cs). Pyrolysis temperature for A&Cs preparation exhibited a positive effect on Cu(II) adsorption, while the AC500 possessed the greatest performance for TC remediation. Interestingly, a synergistic effect instead of competitive adsorption occurred between Cu(II) and TC under the combined binary system, as both TC and Cu(II) adsorption amount on A&C500 increased more than that in the single system, which could be mainly attributed to the bridge actions between the TC and Cu(II). In addition, hydrogen bonding, ᴨ-ᴨ EDA interaction, pore-filling and complexation exerted significant roles in the adsorption process of TC and Cu(II). In general, this study offered a new perspective on the regeneration of livestock and poultry industry wastewater polluted with antibiotics and heavy metals.