A review on hydrothermal carbonization of potential biomass wastes, characterization and environmental applications of hydrochar, and biorefinery perspectives of the process

Characteristics and phytotoxicity of hydrochar-derived dissolved organic matter: Effects of feedstock type and hydrothermal temperature

The dissolved organic matter (DOM) with high mobility and reactivity plays a crucial role in soil. In this study, the characteristics and phytotoxicity of DOM released from the hydrochars prepared from different feedstocks (cow manure, corn stalk and Myriophyllum aquaticum) under three hydrothermal carbonization (HTC) temperatures (180, 200 and 220°C) were evaluated. The results showed that the hydrochars had high dissolved organic carbon content (20.15 to 37.65 mg/g) and its content showed a gradual reduction as HTC temperature increased. Three fluorescent components including mixed substance of fulvic acid-like and humic acid-like substances (C1, 30.92%-58.32%), UVA humic acid-like substance (C2, 25.27%-29.94%) and protein-like substance (C3, 11.74%-41.92%) were identified in hydrochar DOM by excitation emission matrix spectra coupled with parallel factor analysis. High HTC temperature increased the relative proportion of aromatic substances (C1+C2) and humification degree of hydrochar DOM from cow manure, while it presented adverse effects on the hydrochar DOM from corn stalk and Myriophyllum. aquaticum. The principal component analysis suggested that feedstock type and HTC temperature posed significant effects on the characteristics of hydrochar DOM. Additionally, seed germination test of all hydrochar DOM demonstrated that the root length was reduced by 8.88%-26.43% in contrast with control, and the germination index values were 73.57%-91.12%. These findings provided new insights into the potential environmental effects for hydrochar application in soil.

Optimization of hydrochar synthesis conditions for enhanced Cd(II) and Pb(II) adsorption in mono and multimetallic systems

The characterisation of hydrochars derived from Sargassum biomass collected along the Mexican Caribbean coast reveals their favourable morphology and chemical composition for incorporating metal ions, including Cd(II) and Pb(II). Among the synthesized materials, HCS-3, produced at 180 °C with a 2 h residence time, exhibited superior yield, specific area, carbon content, and capacity for removing Cd(II) and Pb(II). Adsorption equilibrium studies demonstrate the presence of adsorption processes during Cd(II) and Pb(II) retention on HCS-3, with adsorption capacities slightly exceeding 140 and 340 mg g⁻1, respectively. Notably, HCS-3 shows a greater affinity for Pb(II) over Cd(II) when both elements are present concurrently. The physicochemical analysis through FTIR spectroscopy, functional group analysis, point of zero charge determination, SEM/EDS, and other techniques evidenced that HCS-3 possesses favourable characteristics to serve as a heavy metal adsorbent. These findings underscore the efficacy of hydrochars from Sargassum biomass in removing heavy metals, suggesting their potential as superior adsorbents compared to traditional or novel materials, and advising its possible versatility for other pollutants. Utilizing these hydrochars could mitigate the economic and environmental impact of Sargassum biomass by repurposing it for valuable applications.

Capturing differences in the release potential of dissolved organic matter from biochar and hydrochar: Insights from component characterization and molecular identification

Biochar and hydrochar have garnered widespread attention owing to their excellent performance in environmental remediation, carbon sequestration, and resource utilization from biowaste. Studies on the release potential of dissolved organic matter (DOM) have been limited, and the distinction between biochar and hydrochar remains unclear. In this study, pine sawdust was utilized as a model precursor with the aim of comparing the release quantity, components, and properties of DOM from biochar (BDOM) and hydrochar (HDOM) under various simulated conditions. The amount of DOM released by hydrochar (38.20-190.49 g/kg) was significantly greater than that released by biochar (0.57-11.96 g/kg), and more DOM was released at higher temperatures and pH values. BDOM consists of three categories of components, namely, humic-like, protein-like, and benzoic acid-like and tyrosine-like substances compounds, whereas HDOM consists of four categories of components, namely, two categories of humic-like compounds and two categories of protein-like compounds. By using ESI-FT-ICR-MS technology, 8586 compounds in BDOM and 6428 compounds in HDOM were identified. A total of 4665 unique compounds were found in BDOM, 1416 unique compounds were found in HDOM under alkaline release conditions, and HDOM contained more unique compounds than those found in other environments. CRAM/lignin-like compounds made up the majority of the released DOM and reached 31.01-65.35 % for BDOM and 54.79-73.05 % for HDOM. These findings revealed significant differences in the release potential of DOM from biochar and hydrochar, and further behavior research is needed to guide future applications of char materials in the environment and agriculture fields.

Treatment of swine manure by hydrothermal carbonization: The influential effect and preliminary mechanism of surfactants

Treatment of swine manure by hydrothermal carbonization (HTC) with the aid of different surfactants was first explored in this study. PEG 400 (polyethylene glycol 400) and Tween 80 facilitated the formation of bio-oil. SLS (sodium lignosulfonate) and SDS (sodium dodecyl sulfate) promoted the formation of water-soluble matters/gases. Span 80 enhanced the formation of hydrochar, which resulted in a 50.19 % mass yield, 92.39 % energy yield, and a caloric value of 28.68 MJ/kg. The hydrochar obtained with Span 80 presented a similar combustion performance to raw swine manure and the best pyrolysis performance. The use of Span 80 promoted the transfer of degradation products to hydrochar, especially hydrophobic ester and ketone compounds. Notedly, Span 80 suppressed the synthesis of PAHs during the HTC process, which was reduced to 0.92 mg/kg. Furthermore, the hydrochar produced with Span 80 contained lower contents of heavy metals. On the whole, Span 80 has shown great potential in enhancing the HTC of swine manure. The acting mechanisms of surfactants in the HTC of swine manure included adsorption, dispersion, and electrostatics repulsion.

Interactions between nanobiochar and arsenic: Effects of biochar aging methods on arsenic binding capacity and mechanisms

Nano-biochar (nanoBC), produced from biochar aging, exhibits significant molecular heterogeneity that may affect the fate and toxicity of co-occurring pollutants. However, the interaction between nanoBC and arsenic (As) remains unclear. Herein, we simulated biochar aging through water erosion, photoaging, and thermal chemical decomposition to generate three types of nanoBC (nUBC, nPBC, and nHBC). We then investigated their distinct binding affinities and interaction mechanisms with arsenite (AsIII) and arsenate (AsV). Complementary analysis using optical spectrophotometer and high-resolution mass spectrometry revealed significant differences in properties and chemical compositions among the three nanoBCs at a size of 100 nm. Specifically, nHBC had higher yield, nPBC had higher aromaticity, and nUBC had more intricate molecular compositions and larger molecular weights. Binding experiments showed that nHBC and nUBC exhibited the highest conditional distribution coefficient (KD) for AsIII and AsV, respectively. In nHBC, a higher proportion of humic-like fluorescent component C3 enhanced its affinity for AsIII, attributed to lignin-like molecules with CHONS formulas where thiol acted as active binding sites. In contrast, the robust AsV binding capacity of nUBC stemmed from its richness in humic-like fluorescent component C1 and tryptophan-like fluorescent component C2. This is facilitated by lipid-like molecules and CHO formulas in C1 and aliphatic/peptide-like molecules and CHON formulas in C2, which provided oxygenic and nitrogen-containing groups for binding. All nanoBC had a significantly higher binding affinity for As than bulk BC. These findings provide a deeper understanding of As-nanoBC binding mechanisms at the molecular level, facilitating more accurate prediction of As fate in biochar-amended soil and associated ecosystem risks.

Revolutionizing waste: Harnessing agro-food hydrochar for potent adsorption of organic and inorganic contaminants in water

Constant pollution from a wide range of human activities has a negative impact on the quantity and quality of the planet's water resources. On the other hand, agro-food waste can impact climate change and other forms of life, in addition to having social, economic, and environmental consequences. However, as a result of their inherent physicochemical properties and lignocellulosic composition, these residues are becoming increasingly recognized as valuable products in line with government policies advocating zero waste and circular economies. An advantageous way to convert these wastes into energy and chemicals is hydrothermal carbonization (HTC). This review highlights the valorization of agro-food waste into hydrochar-based adsorbents for the elimination of organic and inorganic contaminants from aqueous environments. An overview of the toxicity of pollutants in aqueous environments, food waste management, as well as HTC technology was initially proposed. Then, a discussion on the conversion of major agro-food wastes into contaminant adsorbents was given in detail. Adsorption mechanisms as well as the possibility of reuse of adsorbents were also discussed. Enhanced properties of the produced materials enable them to provide competent solutions to various ecological contexts, including removing pollutants from wastewater with cost-effectiveness and satisfactory results. Besides addressing environmental concerns, this sustainable approach opens the door for more environmentally-friendly and resource-efficient applications in the future, making it an exciting prospect.

Hydrochar from sawdust and sewage sludge - a potential media for retaining heavy metals in sustainable drainage systems (SuDS)

Waste valorization is an essential aspect of sustainable development. From this perspective, co-hydrothermal carbonization (Co-HTC) is a promising thermochemical process for converting organic waste into hydrochar. Hydrochar is a solid material whose physicochemical properties could make it suitable for adsorbing pollutants such as heavy metals. Accordingly, this work evaluated the hydrochar from Co-HTC of sawdust and non-dewatered sewage sludge as a potential adsorbent of heavy metals at low concentrations. In the context of sustainable drainage systems (SuDS), it is notable that heavy metals are present at very low but still potentially harmful concentrations, which presents a potential opportunity for the application of hydrochar. Thus, three hydrochars (H-180, H-215, and H-250), produced by Co-HTC at 180, 215, and 250 °C, were tested herein for their ability to retain lead (Pb2+). The H-180 presented better performance than other hydrochars (H-215 and H-250), suggesting that chemisorption could be the main adsorption mechanism. Interestingly, the presence of other cationic heavy metals (Cu2+, Zn2+, Cd2+, Cr6+, and Ni2+) did not hinder the Pb2+ adsorption, for which the removal efficiency remained close to 100%. In fact, in such a multi-metal system, hydrochar can be suitable for capturing both lead and cadmium. Therefore, the hydrochar from Co-HTC of sawdust and non-dewatered sewage sludge can be useful for removing heavy metals at low concentrations, such as those found in urban runoff waters. Although further studies are required, these findings suggest hydrochar as a potential material for application in SuDS.

Co-hydrothermal carbonization of lignocellulosic biomass and swine manure: Optimal parameters for enhanced nutrient reclamation, carbon sequestration, and heavy metals passivation

Hydrochar, the primary product of hydrothermal carbonization (HTC) of wet organic waste, is recognized as a versatile, carbon-abundant material with diverse applications. However, optimizing its performance for specific uses remains challenging. Therefore, this study introduced a co-HTC process involving carbon-rich lignocellulosic materials and ash-rich livestock manure [i.e., Zanthoxylum bungeanum branch residue (ZB) and swine manure (SM), respectively]. The impacts of HTC temperature (i.e., 180 °C, 220 °C, and 240 °C) and mass ratios (i.e., 1:0, 7:3, 5:5, 3:7, and 0:1) on hydrochar properties (e.g., pH, EC, nutrient contents, heavy metal content and availability, chemical stability, etc) and the characteristics of process water were evaluated. Results reveal that co-HTC dramatically improved the quality of hydrochars compared with that derived from a single feedstock. Notably, the ZB:SM ratio had a more substantial impact on total nutrient content, carbon stability, and heavy metal accumulation and mobility. Additionally, the synergistic effects of ZB and SM were greatly dependent on the HTC temperature. By adjusting the feedstock mass ratio and HTC temperature, a highly-functionalized hydrochar can be produced. For example, hydrochars produced at 240 °C with a 7:3 ZB to SM ratio (HC240-7) is optimal for degraded soil amendment, enhancing carbon sequestration and nutrient supplementation. Results from this study could provide valuable insights for improving waste management through HTC and expanding the environmental and agricultural application of hydrochar.

A comprehensive review of enhanced CO2 capture using activated carbon derived from biomass feedstock

The increasing level of atmospheric CO2 requires the urgent development of effective capture technologies. This comprehensive review thoroughly examines various methods for the synthesis of carbon materials, modification techniques for converting biomass feedstock into carbon materials and pivotal factors impacting their properties. The novel aspect of this review is its in-depth comparison of how these modifications specifically affect the pore structure and surface area together with the exploration of the mechanism underlying the enhancement of CO2 adsorption performance. Additionally, this review addresses research gaps and provides recommendations for future studies concerning the advantages and drawbacks of CO2 adsorbents and their prospects for commercialization and economic feasibility. This article revealed that among the various strategies, template carbonization offers a viable option for providing control of the material pore diameter and structure without additional modification treatments. Optimizing the pore structure of activated carbons, particularly those activated with agents such as KOH and ZnCl2, together with synthesizing hybrid activated carbons using multiple activating agents, is crucial for enhancing their CO2 capture performance. Cost-benefit analysis suggests that biomass-derived activated carbons can significantly meet the escalating demand for CO2 capture materials, offering economic advantages and supporting sustainable waste management.

Exploring Corymbia torelliana hydrochar combustion kinetics through thermogravimetric analysis, peak deconvolution and reaction profile modelling

This study aims to conduct an applied and innovative investigation to enhance the energy quality of wood residues through hydrothermal carbonization pretreatment. For this purpose, the treatment was carried out at three different temperatures: 180, 220, and 240 °C under autogenous pressure. The in natura material and the hydrochars were characterized, and thermogravimetric analyses were performed in an O2 atmosphere with heating rates of 2.5, 5, 10, and 20 °C min-1. The global activation energy for natura biomass combustion was determined to be 112.49 kJ.mol-1. On the other hand, the hydrothermal carbonization process promoted a reduction in this value for the 94.85 kJ.mol-1. The conversion function for the in natura biomass was characterized as 1 - α , order 1, while the hydrochars was 2(1-α) [-ln(1-α)] (1⁄2), Avrami-Erofe'ev I. Triple kinetic parameters were ascertained, and the conversion curves along with their respective derivatives were modeled, exhibiting minimal deviations between theoretical and experimental data. This facilitated the mathematical representation of the reaction processes and allowed for a comprehensive comparison of the results.

Valorization of Agriculture Residues into Value-Added Products: A Comprehensive Review of Recent Studies

Global agricultural by-products usually go to waste, especially in developing countries where agricultural products are usually exported as raw products. Such waste streams, once converted to "value-added" products could be an additional source of revenue while simultaneously having positive impacts on the socio-economic well-being of local people. We highlight the utilization of thermochemical techniques to activate and convert agricultural waste streams such as rice and straw husk, coconut fiber, coffee wastes, and okara power wastes commonly found in the world into porous activated carbons and biofuels. Such activated carbons are suitable for various applications in environmental remediation, climate mitigation, energy storage, and conversions such as batteries and supercapacitors, in improving crop productivity and producing useful biofuels.

The effect of an acidic environment during the hydrothermal carbonization of sewage sludge on solid and liquid products: The fate of heavy metals, phosphorus and other compounds

The pH of sewage sludge is a crucial factor during the hydrothermal carbonization process that influences the characteristics of the resulting products and migration of certain compounds from the solid to liquid phase. Accordingly, this work is focused on examining the pH impact during the HTC process, in particular, pH equals 2, 3, 4, 5 and 6 on the individual hydrothermally carbonized products generated at 200 °C and 2 h residence time. For this reason, the chemical and physical indicators describing the post-processing liquid and hydrochar were determined. For instance, it was observed that the phosphorus content detected in the liquid, derived at pH2, rose significantly by 80%. Furthermore, decreasing the pH of sewage sludge had a significant impact on the ash content and the calorific value of the hydrochar. Additionally, changes in the specific surface area of hydrochar were noticed: pH = 5 and pH = 6 showed an increase of 20-30%, while for lower pH values a decrease of c.a. 26% was achieved. The distribution of heavy metals between the obtained fractions in the HTC process (solid and liquid) indicated that 92 to almost 100% of the tested heavy metals were transferred to the hydrochar. A significant effect of pH on the distribution between these fractions was observed only for Zn and Ni. For instance, for pH = 2, Zn and Ni in post-processing liquid were 34% and 29%, respectively. In addition, the sequential extraction of heavy metals from hydrochar was also performed in order to identify mobile and non-mobile phases. It was noticed that the acidic environment favours a higher amount of mobile heavy metals in hydrochar. The largest effect was observed for Cd, Pb, Cr and Cu, for which, at pH = 2, their respective amounts in the mobile fraction were 2.7; 3.6; 1.8; 6.2 times higher, compared to the hydrochar without pH correction.

Large-scale soil application of hydrochar: Reducing its polycyclic aromatic hydrocarbon content and toxicity by heating

The beneficial roles of hydrochar in carbon sequestration and soil improvement are widely accepted. Despite few available reports regarding polycyclic aromatic hydrocarbons (PAHs) generated during preparation, their potential negative impacts on ecosystems remain a concern. A heating treatment method was employed in this study for rapidly removing PAHs and reducing the toxicity of corn stover-based hydrochar (CHC). The result showed total PAHs content (∑PAH) decreased and then sharply increased within the temperature range from 150 °C to 400 °C. The ∑PAH and related toxicity in CHC decreased by more than 80% under 200 °C heating temperature, compared with those in the untreated sample, representing the lowest microbial toxicity. Benzo(a)pyrene produced a significant influence on the ecological toxicity of the hydrochar among the 16 types of PAHs. The impact of thermal treatment on the composition, content, and toxicity of PAHs was significantly influenced by the adsorption, migration, and desorption of PAHs within hydrochar pores, as well as the disintegration and aggregation of large molecular polymers. The combination of hydrochar with carbonized waste heat and exhaust gas collection could be a promising method to efficiently and affordably reduce hydrochar ecological toxicity.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Ecological consequences of biochar and hydrochar amendments in soil: assessing environmental impacts and influences

Anthropogenic activities have caused irreversible consequences on our planet, including climate change and environmental pollution. Nevertheless, reducing greenhouse gas (GHG) emissions and capturing carbon can mitigate global warming. Biochar and hydrochar are increasingly used for soil remediation due to their stable adsorption qualities. As soil amendments, these materials improve soil quality and reduce water loss, prevent cracking and shrinkage, and interact with microbial communities, resulting in a promising treatment method for reducing gas emissions from the top layer of soil. However, during long-term studies, contradictory results were found, suggesting that higher biochar application rates led to higher soil CO2 effluxes, biodiversity loss, an increase in invasive species, and changes in nutrient cycling. Hydrochar, generated through hydrothermal carbonization, might be less stable when introduced into the soil, which could lead to heightened GHG emissions due to quicker carbon breakdown and increased microbial activity. On the other hand, biochar, created via pyrolysis, demonstrates stability and can beneficially impact GHG emissions. Biochar could be the preferred red option for carbon sequestration purposes, while hydrochar might be more advantageous for use as a gas adsorbent. This review paper highlights the ecological impact of long-term applications of biochar and hydrochar in soil. In general, using these materials as soil amendments helps establish a sustainable pool of organic carbon, decreasing atmospheric GHG concentration and mitigating the impacts of climate change.

Effects of biogas slurry on hydrothermal carbonization of digestate: Synergistic valorization of hydrochars and aqueous phase

In this study, livestock manure digestate (LMD) was used as feedstock for hydrothermal carbonization (HTC) at different temperature (180-260 °C) and residence time (0-4 h). Nutrient flow and distribution during the HTC process were evaluated by comparing the effects of livestock manure biogas slurry (LBS) and ultrapure water (UW) to determine the optimal reaction conditions for the synergistic production and application of hydrochars (HC) and aqueous phases (AP). Compared with UW, the HC yields derived from LBS as solvent were increased by 27.05-38.24% under the same conditions. The C content, high heating value (HHV), and energy densification of HC obtained from LMD and UW were higher than those obtained from LMD and LBS, and the ash content was lower. While, LBS circumstance improved the porosity, N content and some trace elements e.g. Ca, Fe and Mg in HC that showed excellent fertility potential. In addition, the recovery rate of K, TOC, NH4+-N, and TN concentrations in AP were significantly higher in the LBS circumstance than in UW. The results show that the addition of UW is more favorable for fuel generation, and the HC obtained from LMD and UW at 220 °C has the potential to be used as a fuel. Whereas, the addition of LBS enhanced the potential of HC and AP for agricultural applications simultaneously. It is recommended to use HC and AP obtained from LMD and LBS at 240 °C for using as fertilizer.

Enhanced adsorption of dye wastewater by low-temperature combined NaOH/urea pretreated hydrochar: Fabrication, performance, and mechanism

The highly stable biomass structure formed by cellulose, hemicellulose, and lignin results in incomplete conversion and carbonization under hydrothermal conditions. In this study, pretreated corn straw hydrochar (PCS-HC) was prepared using a low-temperature alkali/urea combination pretreatment method. The Mass loss rate of cellulose, hemicellulose, and lignin from pretreated biomass, as well as the effects of the pretreatment method on the physicochemical properties of PCS-HC and the adsorption performance of PCS-HC for alkaline dyes (rhodamine B and methylene blue), were investigated. The results showed that the low-temperature NaOH/urea pretreatment effectively disrupted the stable structure formed by cellulose, hemicellulose, and lignin. NaOH played a dominant role in solubilizing cellulose and the combination of low temperature and urea enhanced the ability of NaOH to remove cellulose, hemicellulose, and lignin. Compared to the untreated hydrochar, PCS-HC exhibited a rougher surface, a more abundant pore structure, and a larger specific surface area. The unpretreated hydrochar exhibited an adsorption capacity of 64.8% for rhodamine B and 66.32% for methylene blue. However, the removal of rhodamine B and methylene blue by PCS-BC increased to 89.12% and 90.71%, respectively, under the optimal pretreatment conditions. The PCS-HC exhibited a favorable adsorption capacity within the pH range of 6-9. However, the presence of co-existing anions such as Cl-, SO42-, CO32-, and NO3- hindered the adsorption capacity of PCS-HC. Among these anions, CO32- exhibited the highest level of inhibition. Chemisorption, including complexation, electrostatic attraction, and hydrogen bonding, were the primary mechanism for dye adsorption by PCS-HC. This study provides an efficient method for utilizing agricultural waste and treating dye wastewater.

Taguchi optimisation of the synthesis of vine-pruning-waste hydrochar as potential adsorbent for pesticides in water

This research aimed to synthesise an effective hydrochar adsorbent from vineyard pruning wastes to remove emerging contaminants as a potential valorisation product. The adsorption capacity of the hydrochar was optimised using the Taguchi method. Four synthesis variables were evaluated: hydrothermal reaction temperature, use of H3PO4 as a catalyst, number of acetone washes, and type of chemical cold activation. The simultaneous adsorption of five model pesticides (clothianidin (CTD), acetamiprid (ACE), 2,4-D, metalaxyl (MET), and atrazine (ATZ)) at an initial pH of 7 was studied. At optimum conditions, the hydrochar presented a total adsorption capacity of 22.7 μmol/g, representing a 2.7-fold improvement with respect to pristine hydrochar performance. High percentage removals were achieved for all pollutants (85 % CTD, 94 % ACE, 86 % MET, and 95 % ATZ) except for 2,4-D (4 %). This research provides a valuable reference for developing hydrochar adsorbents for pollution control and the valorisation of biomass wastes.

Biocrude extraction from human-excreta-derived hydrochar for sustainable energy and agricultural applications

Hydrothermal carbonization may be a sustainable sanitary treatment for wet organic waste including human excreta. Human-excreta-derived hydrochar properties differ from those of typical wet biomass due to the formation of a biocrude-like phase at low reaction temperatures. This study characterized the importance of this phase in terms of hydrochar combustion properties and potential agricultural use. Hydrothermal carbonization of raw human excreta was undertaken at 180, 210, and 240 °C, after which the biocrude phase was extracted with dichloromethane. Physicochemical properties, surface-area parameters, combustion profiles, and gas emissions of non-extracted hydrochar, biocrude, and extracted hydrochar were compared. The potential agricultural use of extracted hydrochar was assessed in germination experiments. Biocrude comprised up to 49.5% of hydrochar mass with a calorific value of >60% that of extracted hydrochar. Biocrude combustion properties were better than those of hydrochar, before and after extraction as demonstrated by higher combustion index value (Si). The extracted hydrochar surface area (34.7 m2 g-1) was greater than that of non-extracted hydrochar (<2 m2 g-1), and seeds germinated more readily due to the lower phytotoxin content. Most macro and micronutrients required for plant growth were retained in the extracted hydrochar. The extraction of biocrude from human-excreta-derived hydrochar not only provided a higher-quality fuel with enhanced combustion properties but also improved hydrochar characteristics, suggesting its potential as a soil additive for enhanced plant growth.

Characteristics of industrialized hydrothermal cracking solid organic fertilizer and its effects on fresh corn growth

Traditional methods of producing organic fertilizers result in significant nutrient loss and greenhouse gas emissions, making it challenging to align with sustainable development and the achievement of net-zero emissions goals. Hydrothermal cracking, as a novel clean technology for the utilization of organic waste into fertilizer, has been extensively studied and refined in laboratory settings, but its large-scale industrial evaluation remains limited. This study investigates the properties and field application of hydrothermal cracking solid organic fertilizer (HCSOF) produced at a pilot scale with an annual output of 10,000 tons. The results indicate that the organic matter content and total nutrient content (TN + P2O5 + K2O) of HCSOF reached 50.6 % and 5.46 %, respectively, which are 20.6 % and 1.46 % higher than the standards for organic fertilizers in China. Additionally, contaminants such as pathogens and antibiotics in the product were completely eliminated. Elemental analysis and pore size distribution highlighted the unique adsorptive attributes of HCSOF, which showed significant effect in reducing soil ammonium nitrogen. Results from field trials indicate that the complete substitution of chemical fertilizers with HCSOF did not reduce corn yield, which remained at 9.03 t/ha. Particularly, compared to the exclusive use of chemical fertilizers, HCSOF treatments resulted in a 7.03 % and 4.70 % decrease in fresh corn lodging and disease incidence, respectively. Antibacterial tests further confirmed its ability to counter pathogens. This study provides robust evidence for scaling up hydrothermal cracking fertilizer production from laboratory to industrial levels. Future research should focus on multi-batch sampling and extended field experiments.

Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury

With the growing population, the accumulation of waste materials (WMs) (industrial/household waste) in the environment incessantly increases, affecting human health. Additionally, it affects the climate and ecosystem of terrestrial and water habitats, thereby needing effective management technology to control environmental pollution. In this aspect, managing these WMs to develop products that mitigate the associated issues is necessary. Researchers continue to focus on WMs management by adopting a circular economy. These WMs convert into useful/value-added products such as polymers and nanomaterials (NMs), especially carbon nanomaterials (CNs). The conversion/transformation of waste material into useful products is one of the best solutions for managing waste. Waste-derived CNs (WD-CNs) have established boundless promises for numerous applications like environmental remediation, energy, catalysts, sensors, and biomedical applications. This review paper discusses the several sources of waste material (agricultural, plastic, industrial, biomass, and other) transforming into WD-CNs, such as carbon nanotubes (CNTs), biochar, graphene, carbon nanofibers (CNFs), carbon dots, etc., are extensively elaborated and their application. The impact of metal doping within the WD-CNs is briefly discussed, along with their applicability to end applications.

The dynamic features and microbial mechanism of nitrogen transformation for hydrothermal aqueous phase as fertilizer in dryland soil

Hydrothermal aqueous phase (HAP) contains abundant organics and nutrients, which have potential to partially replace chemical fertilizers for enhancing plant growth and soil quality. However, the underlying reasons for low available nitrogen (N) and high N loss in dryland soil remain unclear. A cultivation experiment was conducted using HAP or urea to supply 160 mg N kg-1 in dryland soil. The dynamic changes of soil organic matters (SOMs), pH, N forms, and N cycling genes were investigated. Results showed that SOMs from HAP stimulated urease activity and ureC, which enhanced ammonification in turn. The high-molecular-weight SOMs relatively increased during 5-30 d and then biodegraded during 30-90 d, which SUV254 changed from 0.51 to 1.47 to 0.29 L-1 m-1. This affected ureC that changed from 5.58 to 5.34 to 5.75 lg copies g-1. Relative to urea, addition HAP enhanced ON mineralization by 8.40 times during 30-90 d due to higher ureC. It decreased NO3-N by 65.35%-77.32% but increased AOB and AOA by 0.25 and 0.90 lg copies g-1 at 5 d and 90 d, respectively. It little affected nirK and increased nosZ by 0.41 lg copies g-1 at 90 d. It increased N loss by 4.59 times. The soil pH for HAP was higher than that for urea after 11 d. The comprehensive effects of high SOMs and pH, including ammonification enhancement and nitrification activity inhibition, were the primary causes of high N loss. The core idea for developing high-efficiency HAP fertilizer is to moderately inhibit ammonification and promote nitrification.

Effective Removal of Carcinogenic Azo Dye from Water Using Zea mays-Derived Mesoporous Activated Carbon

Addressing industrial wastewater treatment challenges and removing hazardous organic pollutants, such as carcinogenic methyl orange (MO) and azo dyes, is a pressing concern. This study explores the use of the Zea mays envelope, an agricultural waste product, to produce Z. mays activated carbon (ZMAC) through the chemical activation of maize envelopes with phosphoric acid. Various analytical techniques, including FTIR, XRD, TGA, DSC, and SEM, characterize ZMAC. Results show that ZMAC exhibits an impressive monolayer adsorption capacity of 66.2 mg/g for MO. The Langmuir isotherm model fits the experimental data well, indicating monolayer coverage of the MO on the ZMAC surface. The pH-sensitive adsorption process demonstrates an optimal removal efficiency at pH 4. ZMAC follows the pseudo-second-order kinetic model, and diffusion rate constant analysis identifies three consecutive stages in the adsorption process. Moreover, the uptake of MO ions by ZMAC is identified as an exothermic and spontaneous process. Reusability tests demonstrate efficient regeneration of ZMAC up to five times with 1 mL of 2 M HNO3 in each cycle, without sorbent mass loss. Thermodynamic analysis shows an increase in the uptake capacity from 66.2 to 73.2 mg/g with temperature elevation. This study offers practical solutions for industrial wastewater treatment challenges, providing an environmentally sustainable and effective approach to mitigate the risks associated with hazardous organic pollutants.

Hydrothermal carbonization of Chinese medicine residues: Formation of humic acids and combustion performance of extracted hydrochar

Aiming at the sustainable management of high-moisture Chinese medicine residues (CMR), an alternative way integrating hydrothermal carbonization (HTC), humic acids (HAs) extraction and combustion of remained hydrochar has been proposed in this study. Effect of HTC temperature, HTC duration, and feedwater pH on the mass yield and properties of HAs was examined. The associated formation mechanism of HAs during HTC was proposed. The combustion performance of remained hydrochar after HAs extraction was evaluated. Results show that the positive correlation between hydrochar yield and HAs yield is observed. According to three-dimensional excitation emission matrix (3D EEM) fluorescence intensity, the best quality of HAs is achieved with a yield of 8.17 % at feedwater pH of 13 and HTC temperature of 200 °C. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses show abundant aromatic and aliphatic structure as well as oxygenated functional groups in HAs, which is like commercial HAs (HA-C). Besides, in terms of comprehensive combustion index (CCI), HTC can improve the combustion performance of CMR, while it becomes a bit worse after HAs extraction. Higher weighted mean apparent activation energy (Em) of hydrochar indicating its highly thermal stability. HAs extraction reduces Em and CCI of remained hydrochar. However, it can be regarded a potential renewable energy. This work confirms a more sustainable alternative way for CMR comprehensive utilization in near future.

A review: Hydrochar as potential adsorbents for wastewater treatment and CO2 adsorption

To valorize the biomass and organic waste, hydrothermal carbonization (HTC) stands out as a highly efficient and promising pathway given its intrinsic advantages over other thermochemical processes. Hydrochar, as the main product obtained from HTC, is widely applied as a fuel source and soil conditioner. Aside from these applications, hydrochar can be either directly used or modified as bio-adsorbents for environmental remediation. This potential arises from its tunable surface chemistry and its suitability to act as a precursor for activated or engineered carbon. In view of the importance of this topic, this review offers a thorough examination of the research progress for using hydrochar and its modified forms to remove organic dyes (cationic and anionic dyes), heavy metals, herbicides/pesticides, pharmaceuticals, and CO2. The review also sheds light on the fundamental chemistry involved in HTC of biomass and the major analytical techniques applied for understanding surface chemistry of hydrochar and modified hydrochar. The knowledge gaps and potential hurdles are identified to highlight the challenges and prospects of this research field with a summary of the key findings from this review. Overall, this article provides valuable insights and directives and pinpoints the areas meriting further investigation in the application potential of hydrochar in wastewater management and CO2 capture.

Semi-continuous hydrothermal processing of pine sawdust for integrated production of fuels precursors and platform chemicals

This research reports data for the integrated obtaining of fermentable sugars (FSs), bio-oil (BO), and hydro-char (HC) - all fuel precursors - as well as platform chemicals (PCs - acetic, formic, and levulinic acid, besides furfural, and hydroxymethylfurfural) through semi-continuous hydrothermal processing of sawdust from pine wood. The influence of temperature (260, 300, and 340 °C) and the water-to-biomass ratio (25 and 50 g H2O (g biomass)-1) were the parameters considered to evaluate the mass yields, kinetic profiles, and BO properties. For FSs (and PCs), a detailed analysis considering the kinetic profiles of obtaining cellobiose, glucose, xylose, and arabinose is presented. For the conditions evaluated, a distinct behavior concerning the process parameters was observed, where 7.11 and 9.28 g (100 g biomass)-1 of FSs and PCs were synergistically obtained, respectively, after 30 min, 20 MPa, 260 °C, and 50 g H2O (g biomass)-1. Contextually, 17.59 g (100 g biomass)-1 of BO was obtained at 340 °C and the same water/biomass ratio. FTIR analysis of the BO samples suggested the presence of aldehydes, carboxylic acids, ketones, hydrocarbons, ethers as well as aromatic, alcohols, and nitrogenous compounds. Similar HC yields were achieved among the conditions analyzed, where 24.68 g (100 g biomass)-1 were obtained at 340 °C and 50 g H2O (g biomass)-1 for a higher heating value of 29.14 MJ kg-1 (1.5 times higher than the in natura biomass).

Insights into the effect of hydrochar-derived dissolved organic matter on the sorption of diethyl phthalate onto soil: A pilot mechanism study

Biowaste-derived hydrochar is an emerging close-to-natural product and has shown promise for soil improvement and remediation, but the environmental behavior of the dissolved organic matter released from hydrochar (HDOM) is poorly understood. Focusing on the typical mulch film plasticizer diethyl phthalate (DEP), we investigated the effect of HDOM on the sorption behavior of DEP on soil. The relatively low concentration of HDOM (10 mg L-1, 25 mg L-1) decreases the sorption quantity of DEP on soil, while it increases by a relatively high concentration, 50 mg L-1. The transformation from multilayer to monolayer sorption of DEP on soil occurs as the concentration of HDOM increases. The tryptophan-like substance is the main component of HDOM sorbed to soil, reaching 49.82 %, and results in competition sorption with DEP. The soil pores are blocked by HDOM, which limits the pore filling and mass transfer of DEP, but partitioning is significantly enhanced. The surface functional groups in HDOM are similar to those in soil, and chemical sorption, mainly composed of hydrogen bonding, exists but is not significantly strengthened. We identified the specific impact of HDOM on the sorption of organic pollutants on soil and provide new insights into the understanding of the environmental behavior of hydrochar.

Pulp-paper industry sludge waste biorefinery for sustainable energy and value-added products development: A systematic valorization towards waste management

The pulp-paper industry is one of the main industrial sectors that produce massive amounts of residual sludge, constituting an enormous environmental burden for the industries. Traditional sludge management practices, such as landfilling and incineration, are restricted due to mounting environmental pressures, complex regulatory frameworks, land availability, high costs, and public opinion. Valorization of pulp-paper industry sludge (PPS) to produce high-value products is a promising substitute for traditional sludge management practices, promoting their reuse and recycling. Valorization of PPIS for biorefinery beneficiation includes biomethane, biohydrogen, bioethanol, biobutanol, and biodiesel production for renewable energy generation. Additionally, the various thermo-chemical technologies can be utilized to synthesize bio-oil, hydrochar, biochar, adsorbent, and activated carbon, signifying potential for value-added generation. Moreover, PPIS can be recycled as a byproduct by incorporating it into nanocomposites, cardboard, and construction materials development. This paper aims to deliver a comprehensive overview of PPIS management approaches and thermo-chemical technologies utilized for the development of platform chemicals in industry. Substitute uses of PPIS, such as making building materials, developing supercapacitors, and making cardboard, are also discussed. In addition, this article deeply discusses recent developments in biotechnologies for valorizing PPIS to yield an array of valuable products, such as biofuels, lactic acids, cellulose, nanocellulose, and so on. This review serves as a roadmap for future research endeavors in the effective handling of PPIS.

Hydrothermal Ammonia Carbonization of Rice Straw for Hydrochar to Separate Cd(II) and Zn(II) Ions from Aqueous Solution

Hydrochar is considered to be a good adsorbent for the separation of metal ions from aqueous solutions. However, the yield of hydrochar from raw straw is generally low, because the hydrothermal carbonization occurs via dehydration, polymerization, and carbonization. In this work, various hydrochar samples were prepared from rice straw with nitrogen and phosphorus salt; moreover, toilet sewage was used instead of nitrogen, and phosphorus salt and water were used to promote the polymerization and carbonization process. The modified carbon was characterized using XRD, XPS, SEM, and FTIR, and the adsorption capacity was investigated. A significant increase in hydrochar yield was observed when toilet sewage was used as the solvent in the hydrothermal carbonization process. The adsorption capacity of N/P-doped rice straw hydrochar for Cd2+ and Zn2+ metal ions was 1.1-1.4 times higher than that those using the rice straw hydrochar. The Langmuir models and pseudo-second-order models described the metal adsorption processes in both the single and binary-metal systems well. The characterization results showed the contribution of the surface complexation, the electrostatic interaction, the hydrogen bond, and the ion exchange to the extraction of Cd2+ and Zn2+ using N/P-doped rice straw hydrochar.

Trithiocyanurate-functionalized hydrochar for effectively removing methylene blue and Pb (II) cationic pollutants

Functionalization can change the physicochemical properties of hydrochar and improve its ability to adsorb pollutants. Herein, a trithiocyanurate-functionalized hydrochar (TTHC) was obtained from acylation of chloroacetyl chloride and hydrochar and modification with trithiocyanuric acid in alkaline conditions. TTHC can efficiently remove cationic methylene blue (MB) and Pb(II) from wastewater. The removal can be expressed with pseudo-second-order kinetic and Langmuir models. The MB and Pb(II) removed uptakes by TTHC at 298 K exceeded 909.9 and 182.8 mg g-1 respectively, and the removal rates reached 90% and 98% within 120 min respectively. Characterizations show TTHC is functionalized with trithiocyanurate, and rich in thiolate and aromaticity, and tends to adsorb MB/Pb(II) via multiple adsorption mechanisms. After five sorption-desorption regeneration cycles, TTHC maintained 80% and 99% adsorption capacities for MB and Pb(II) respectively. Therefore, TTHC is a promising efficient sorbent for removing MB and Pb(II) from effluents.

Seawater as supplemental moisture: The effect of Co-hydrothermal carbonization products obtained from chicken manure and cornstalk

The use of seawater as a substitute for pure water as supplemental moisture raises questions about its effect on the physicochemical properties of hydrochar. Therefore, this study aimed to investigate the feasibility of using seawater as supplemental moisture by comparing the physicochemical properties of products obtained through Co-hydrothermal carbonization of chicken manure and cornstalk under seawater and deionized water conditions. By varying the HTC temperature and blending ratios of CM and CS to investigate comprehensively the effect of seawater. Results indicated that the hydrochar yield experienced a variation from 54.54% to 57.40%, while the IC value changed from 7.69% to 8.46% as the ratio of CM:CS shifted from 3:1 to 1:3 under seawater conditions. The higher heating value of the hydrochars obtained under seawater conditions was lower than those obtained under deionized water conditions. This suggests that seawater conditions promote the hydrolysis reaction of organic solid waste. Furthermore, it was observed that when no lignin hydrolysis reaction occurred, seawater conditions had no discernible effect on the fuel quality of the hydrochar. However, at an HTC temperature of 250 °C, the fuel quality of the hydrochar obtained under seawater conditions was notably inferior to that of the hydrochar obtained under deionized water. Thus, an HTC temperature lower than 250 °C is necessary for the hydrothermal carbonization of organic solid waste under seawater conditions. Moreover, the relative content of surface -C-(C, H)/CC of the hydrochar obtained under seawater conditions was lower than that obtained under deionized water conditions, indicating that the hydrochar had a low degree of aromatization. Additionally, there was a significant increase in the immobilized Mg atoms in the hydrochar under seawater conditions, which affected the hydrochar yield and higher heating value of the hydrochar. This research presents a theoretical foundation for preparing solid fuels and materials using hydrothermal carbonization of saltwater as supplemental moisture.

Optimizing directional recovery of high-bioavailable phosphorus from human manure: Molecular-level understanding and assessment of application potential

Phosphorus (P) recovery from human manure (HM) is critical for food production security. For the first time, a one-step hydrothermal carbonation (HTC) treatment of HM was proposed in this study for the targeted high-bioavailable P recovery from P-rich hydrochars (PHCs) for direct soil application. Furthermore, the mechanism for the transformation of P speciation in the derived PHCs was also studied at the molecular level. A high portion of P (80.1∼89.3%) was retained in the solid phase after HTC treatment (120∼240°C) due to high metal contents. The decomposition of organophosphorus (OP) into high-bioavailable orthophosphate (Ortho-P) was accelerated when the HTC temperature was increased, reaching ∼97.1% at 210°C. In addition, due to the high content of Ca (40.45±2.37 g/kg) in HM, the HTC process promoted the conversion of low-bioavailable non-apatite inorganic (NAIP) into high-bioavailable apatite inorganic P (AP). In pot experiments with pea seedling growth, the application of newly obtained PHCs significantly promoted plant growth, including average wet/dry weight and plant height. Producing 1 ton of PHCs (210°C) with the same effective P content as agricultural-type calcium superphosphate could result in a net return of $58.69. More importantly, this pathway for P recovery is predicted to meet ∼38% of the current agricultural demand.

Valorization of loquat seeds by hydrothermal carbonization for the production of hydrochars and aqueous phases as added-value products

In the framework of circular bio-economy, waste loquat seeds were utilized for the production of two added-value products. The seeds were hydrothermally carbonized at a temperature range of 150-250 °C and time range 2-6 h and the resultant hydrochars and aqueous phases were characterized using various methods. The optimum higher heating value of 30.64 MJ kg-1, ash content of 1.99 wt % and alkali index of 0.05 were achieved for the hydrochar prepared at 250 °C and 6 h, establishing its suitability for energy-related applications. The aqueous phase obtained at 250 °C and 6 h achieved 90% scavenging of the 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) radical and had a IC50 value of 43.71 μg mL-1. Principal component analysis showed that the production of phenols, ketones, alkenes and organic acids was favored at >200 °C, whereas furans and aldehydes were primarily formed at 150 °C. Conclusively, both added-value products were obtained at the same optimum hydrothermal carbonization conditions of 250 °C and 6 h treatment time. In a bio-refinery context, this has the practical implication that both bio-products be obtained simultaneously, without the need to switch between different temperatures and residence times.

Hydrothermal carbonization of vegetable-tanned leather shavings (HTC-VTS) for environmental remediation: optimization of process conditions

Herein, the response surface methodology (RSM) has been used to study simultaneously the effects of carbonization temperature, residence time and moisture content on the activated hydrochar preparation-based vegetable-tanned leather shavings (VTS) using hydrothermal carbonization method (HTC). Owing to the desirability chosen, three responses were analysed, namely: the hydrochar yield, iodine and methylene blue numbers. The analysis of experimental results revealed that the hydrochar yield was decreased with increase in carbonization temperature which led to micropores formation inside the hydrochar network. The optimal preparation conditions retained were: 83.10%, 390.44 mg g-1 and 259.63 mg g-1 for the hydrochar yield, iodine and methylene blue number respectively. The hydrochar micrograph showed the presence of external pores, whereas the FTIR analysis recorded the presence of acidic functional groups found on hydrochar surface. The findings revealed that the VTS is a good precursor for the hydrochar preparation useful in the removal of organic and inorganic pollutants in aqueous media.

Hybrid porous media gasification of urban solid waste pre-treated by hydrothermal carbonization

Global population growth and rising consumption levels have significantly increased resource use and energy demand, leading to higher greenhouse gas concentrations and increased waste output. As a result, alternative waste treatment methods for sustainable municipal solid waste (MSW) management are crucial. This research evaluates the efficiency of integrating hydrothermal carbonization (HTC) and gasification for an optimized MSW biomass blend. HTC was conducted for one hour at 220°C in a 5 L reactor, followed by gasification in a hybrid porous medium gasifier. The study investigated the effects of different filtration speeds on combustion temperature and hydrogen concentrations. The results showed that a filtration speed of 35 cm/s resulted in a maximum combustion temperature of 1035.7°C. The temperature remained consistent across filter speeds, while higher velocities yielded higher hydrogen concentrations. Additionally, increasing the filtration velocity raised temperatures in the hybrid bed while increasing the volumetric fraction of biomass decreased maximum temperatures. This research contributes to the understanding of merging HTC and gasification for MSW biomass blend treatment, aiming to reduce environmental impacts and costs while promoting renewable resources for long-term energy production.

Carbon Sequestration Strategies in Soil Using Biochar: Advances, Challenges, and Opportunities

Biochar, a carbon (C)-rich material obtained from the thermochemical conversion of biomass under oxygen-limited environments, has been proposed as one of the most promising materials for C sequestration and climate mitigation in soil. The C sequestration contribution of biochar hinges not only on its fused aromatic structure but also on its abiotic and biotic reactions with soil components across its entire life cycle in the environment. For instance, minerals and microorganisms can deeply participate in the mineralization or complexation of the labile (soluble and easily decomposable) and even recalcitrant fractions of biochar, thereby profoundly affecting C cycling and sequestration in soil. Here we identify five key issues closely related to the application of biochar for C sequestration in soil and review its outstanding advances. Specifically, the terms use of biochar, pyrochar, and hydrochar, the stability of biochar in soil, the effect of biochar on the flux and speciation changes of C in soil, the emission of nitrogen-containing greenhouse gases induced by biochar production and soil application, and the application barriers of biochar in soil are expounded. By elaborating on these critical issues, we discuss the challenges and knowledge gaps that hinder our understanding and application of biochar for C sequestration in soil and provide outlooks for future research directions. We suggest that combining the mechanistic understanding of biochar-to-soil interactions and long-term field studies, while considering the influence of multiple factors and processes, is essential to bridge these knowledge gaps. Further, the standards for biochar production and soil application should be widely implemented, and the threshold values of biochar application in soil should be urgently developed. Also needed are comprehensive and prospective life cycle assessments that are not restricted to soil C sequestration and account for the contributions of contamination remediation, soil quality improvement, and vegetation C sequestration to accurately reflect the total benefits of biochar on C sequestration in soil.

An Exploratory Study of Hydrochar as a Matrix for Biotechnological Applications

This paper explores the potentialities of hydrochar in protein separation and enzyme immobilization for non-energy biorefinery applications of hydrothermal carbonization. An innovative experimental procedure monitors soluble protein-hydrochar interactions and enzymatic reactions in a continuously stirred tank reactor. The hydrochar comes from hydrothermal carbonization of silver fir (200 °C, 30 min, 1/7 solid/water ratio) and standard activation (KOH, oven, 600 °C). Bovine serum albumin, a non-active, globular protein, was adsorbed at ≤3300 mg/g. Sip's isotherms fitted data well (R2 = 0.99999). The immobilization used a commercial β-glucosidase, which catalyzes the hydrolysis of cellobiose to glucose, a bottleneck of the cellulose to fermentable sugar bioconversion network due to the fast enzyme deactivation. The hydrochar adsorbed ≤26 w/w% of enzyme. The heterogeneous biocatalyst operational stability was 24 times that of the soluble one. The results encourage further investigations and foreshadow process schemes coupling hydrothermal carbonization and industrial bioconversions.

Energy recovery from agro-forest wastes through hydrothermal carbonization coupled with hydrothermal Co-gasification: Effects of succinic acid on hydrochars and H2 production

Aiming to upgrade agro-forest wastes into value-added solid and gaseous fuels in the present investigation, hydrothermal carbonization (HTC) of spruce (SP), canola hull (CH), and canola meal (CM) was optimized in terms of operating conditions, maximizing the higher heating value of hydrochars. The optimal operating conditions were achieved at HTC temperature, reaction time, and solid-to-liquid ratio of 260 ^°C, 60 min, and 0.2 g mL^-1, respectively. At the optimum condition, succinic acid (0.05-0.1 M) was used as HTC reaction medium to investigate the effects of acidic medium on the fuel characteristics of hydrochars. The succinic acid assisted HTC was found to eliminate ash-forming minerals e.g., K, Mg, and Ca from hydrochar backbones. The calorific values, H/C and O/C atomic ratios of hydrochars were in the range of 27.6-29.8 MJ kg^-1, 0.8-1.1, and 0.1-0.2, respectively, indicating the biomass upgrading into coal-like solid fuels. Finally, hydrothermal gasification of hydrochars with their corresponding HTC aqueous phase (HTC-AP) was assessed. Gasification of CM resulted in a relatively high H₂ yield of 4.9-5.5 mol kg^-1 followed by that for SP with 4.0-4.6 mol H₂ per kg of hydrochars. Results suggest that hydrochars and HTC-AP have a great potential for H₂ production via hydrothermal co-gasification, while suggesting HTC-AP reuse.

A review on the emerging conversion technology of cellulose, starch, lignin, protein and other organics from vegetable-fruit-based waste

A large amount of vegetable-fruit-based waste (VFBW) belonging to agricultural waste is produced around the world every year, imposing a huge burden on the environment and sustainable development. VFBW contains a lot of water and useful organic compounds (e.g., cellulose, minerals, starch, proteins, organic acids, lipids, and soluble sugars). Taking into account the composition characteristics and circular economy of VFBW, many new emerging conversion technologies for the treatment of VFBW (such as hydrothermal gasification, ultrasound-assisted extraction, and synthesis of bioplastics) have been developed. This review summarizes the current literature discussing the technical parameters, process, mechanism, and characteristics of various emerging conversion methods, as well as analyzing the application, environmental impact, and bio-economy of by-products from the conversion process, to facilitate solutions to the key problems of engineering cases using these methods. The shortcomings of the current study and the direction of future research are also highlighted in the review.

Hydrothermal carbonization reaction severity as an indicator of human-excreta-derived hydrochar properties and it's combustion

Hydrothermal carbonization (HTC) is an emerging technology that may potentially address sanitation problems and energy scarcity. However, the significance of the parameters that govern HTC (e.g., temperature and time) is not fully understood, in particular for human excreta. A simplified coalification model was used to describe the 'strength' of thermal reactions by combining temperature and time into a single parameter, the severity factor. This study is the first to assess the extent to which a severity coalification model can predict the properties of human-excreta-derived hydrochar for a given severity with different combinations of reaction time and temperature. HTC experiments with raw human excreta were undertaken with 50 mL batch reactors at five different severities. Severity was established with different combinations of temperature (180 °C, 210 °C, and 240 °C) and reaction time based on the severity-factor equation. The resulting hydrochars were tested for combustion properties, and the respective gas emission as well as, physicochemical and surface area parameters. Significant correlations were found between severity and yield (R² = 0.88), carbon content (R² = 0.85), and calorific value (R² = 0.90), with the properties being similar for a given severity but varying with different severities. Hydrochar's contact angle increased from 53.1° to 81.3° with increasing SF, while surface area remained low, ranging from <1 to 5.1 m²g^-1, with no definite correlation to SF. Combustion profiles for a given severity were generally similar, but the ignition, peak, and burnout temperatures differed between severities. Gram-Schmidt curves indicated that gas emission profiles are similar for a given severity but vary with different severities. The main gases emitted in combustion were virtually identical in all treatments, and included CO₂, alkenes (C9, C10), CH₄, and H₂O. It is concluded that many properties of hydrochar can be inferred from the severity factor.

Fomes fomentarius as a Bio-Template for Heteroatom-Doped Carbon Fibers for Symmetrical Supercapacitors

Nowadays, commercial electric double-layer supercapacitors mainly use porous activated carbons due to their high specific surface area, electrical conductivity, and chemical stability. A feature of carbon materials is the possibility of obtaining them from renewable plant biomass. In this study, fungi (Fomes fomentarius) were used as a bio-template for the preparation of carbon fibers via a combination of thermochemical conversion approaches, including a general hydrothermal pre-carbonization step, as well as subsequent carbonization, physical, or chemical activation. The relationships between the preparation conditions and the structural and electrochemical properties of the obtained carbon materials were determined using SEM, TEM, EDAX, XPS, cyclic voltammetry, galvanostatic measurements, and EIS. It was shown that hydrothermal pretreatment in the presence of phosphoric acid ensured the complete removal of inorganic impurities of raw fungus hyphae, but at the same time, saved some heteroatoms, such as O, N, and P. Chemical activation using H3PO4 increased the amount of phosphorus in the carbon material and saved the natural fungus’s structure. The combination of a hierarchical pore structure with O, N, and P heteroatom doping made it possible to achieve good electrochemical properties (specific capacitance values of 220 F/g) and excellent stability after 25,000 charge/discharge cycles in a three-electrode cell. The electrochemical performance in both three- and two-electrode cells exceeded or was comparable to other biomass-derived porous carbons, making it a prospective candidate as an electrode material in symmetrical supercapacitors.

Analysis of the Scale of Global Human Needs and Opportunities for Sustainable Catalytic Technologies

We analyzed the enormous scale of global human needs, their carbon footprint, and how they are connected to energy availability. We established that most challenges related to resource security and sustainability can be solved by providing distributed, affordable, and clean energy. Catalyzed chemical transformations powered by renewable electricity are emerging successor technologies that have the potential to replace fossil fuels without sacrificing the wellbeing of humans. We highlighted the technical, economic, and societal advantages and drawbacks of short- to medium-term decarbonization solutions to gauge their practicability, economic feasibility, and likelihood for widespread acceptance on a global scale. We detailed catalysis solutions that enhance sustainability, along with strategies for catalyst and process development, frontiers, challenges, and limitations, and emphasized the need for planetary stewardship. Electrocatalytic processes enable the production of solar fuels and commodity chemicals that address universal issues of the water, energy and food security nexus, clothing, the building sector, heating and cooling, transportation, information and communication technology, chemicals, consumer goods and services, and healthcare, toward providing global resource security and sustainability and enhancing environmental and social justice.

Influence of temperature change on the immobilization of soil Pb and Zn by hydrochar: Roles of soil microbial modulation

Considering the potential effect of the ambient temperature on soil microorganisms during heavy metal immobilization by hydrochar, 60 days of soil incubation was conducted to explore the impact of ambient temperature (5, 25, and 35 °C) on the immobilization of Pb and Zn by chitosan-magnetic sawdust hydrochar (CMSH) and magnetic chitosan hydrochar (MCH). The results showed that soil pH was relatively high and total organic carbon (TOC) was slightly lower in the 35 °C treatment. The diethylenetriaminepentaacetic acid (DTPA) available state content decreased significantly with the temperature increasing. Meanwhile, the ratios of stable Pb and Zn in the sequential extraction method proposed by the European Community Bureau of Reference (BCR) gradually increased with increasing temperature. The heatmap based on microbial community showed that elevated temperature not only favored the enrichment of metal-stable phyla, such as Chloroflexi, but was also involved in inhibiting the growth of Firmicutes, Actinobacteriota, and Proteobacteria. Meanwhile, different genera (Fonticella and Bacillus) in the Firmicutes phylum had distinct responses to temperature as well as to heavy metal immobilization effects. Subsequently, redundancy analysis confirmed that Chloroflexi and Fonticella were positively correlated with temperature and stable state metal content, while Actinobacteriota and Bacillus were negatively correlated with temperature and were positively correlated with DTPA available metal content. Moreover, Pb and Zn indicators displayed significant correlations for the dominant genera (R² > 0.8, p < 0.02).

Evaluation of Babassu Cake Generated in the Extraction of the Oil as Feedstock for Biofuel Production

The growing demand for energy and the concern about environmental impacts reinforce the necessity for renewable energy sources such as biofuels. In this study, cake generated in the babassu oil extraction was evaluated as a potential feedstock for solid biofuel production, and it contains a blend of cashew nutshell, sugarcane bagasse, carnauba straw, and carnauba stalk. All samples were characterized by proximate analysis and Higher Heating Value. Carbonization was used to improve energy performance and compaction to understand the mechanism and the characteristics of the biomasses compacted. In the extraction of babassu oil, fresh and aged (90 days) kernel samples were used. The fresh samples reached a yield of 59.8%, and the aged samples reached a yield of 70.66%. The carbonization of babassu cake was carried out in a Muffle furnace at temperatures of 250, 300, 350, and 400 °C. The fresh babassu cake showed an HHV of 23.06 MJ kg−1 and after carbonization of 28.07 (250 °C), 30.69 (300 °C), 28.24 (350 °C), and 18.27 MJ kg−1 (400 °C). At 400 °C, a decrease in HHV of 20.8% occurred, and an increase in Ash (%) of 195% occurred. Proximate analysis showed that biomasses are compatible, with some having a higher compatibility than other biological materials already used as fuels in the industry.