An autopsy study of hollow fiber and multibore ultrafiltration membranes from a pilot-scale ultra high-recovery filtration system for surface water treatment

Bacteriophages in nature: recent advances in research tools and diverse environmental and biotechnological applications

Bacteriophages infect and replicate within bacteria and play a key role in the environment, particularly in microbial ecosystems and bacterial population dynamics. The increasing recognition of their significance stems from their wide array of environmental and biotechnological uses, which encompass the mounting issue of antimicrobial resistance (AMR). Beyond their therapeutic potential in combating antibiotic-resistant infections, bacteriophages also find vast applications such as water quality monitoring, bioremediation, and nutrient cycling within environmental sciences. Researchers are actively involved in isolating and characterizing bacteriophages from different natural sources to explore their applications. Gaining insights into key aspects such as the life cycle of bacteriophages, their host range, immune interactions, and physical stability is vital to enhance their application potential. The establishment of diverse phage libraries has become indispensable to facilitate their wide-ranging uses. Consequently, numerous protocols, ranging from traditional to cutting-edge techniques, have been developed for the isolation, detection, purification, and characterization of bacteriophages from diverse environmental sources. This review offers an exploration of tools, delves into the methods of isolation, characterization, and the extensive environmental applications of bacteriophages, particularly in areas like water quality assessment, the food sector, therapeutic interventions, and the phage therapy in various infections and diseases.

The removal of pathogenic bacteria and dissolved organic matter from freshwater using microporous membranes: insights into biofilm formation and fouling reversibility

Pathogenic bacteria in drinking-water pose a health risk to consumers, as they compromise the quality of portable water. Chemical disinfection of water containing dissolved organic matter (DOM) causes harmful disinfection by-products. In this work, 4-hydroxybenzoic acid (4-HBA) blended polyethersulfone membranes were fabricated and characterised using microscopic and spectroscopic techniques. The membranes were evaluated for the removal of bacteria and DOM from synthetic and environmental water. Permeate flux increased from 287.30 to 374.60 l m-2 h-1 at 3 bars when 4-HBA increased from 0 to 1.5 wt.%, suggesting that 4-HBA influenced the membrane's affinity for water. Furthermore, 4-HBA demonstrated antimicrobial properties by inhibiting bacterial growth. The membrane with 1 wt.% 4-HBA recorded 99.4 and 100% bacteria removal in synthetic and environmental water, respectively. Additionally, DOM removal of 55-73% was achieved. A flux recovery ratio (FRR) of 94.6% was obtained when a mixture of bacteria and humic acid was filtered, implying better fouling layer reversibility during cleaning. Furthermore, 100% FRR was achieved when a multimedia granular filtration step was installed prior to membrane filtration. The results illustrated that the membranes had a high permeate flux with low irreversible fouling. This indicated the potential of the membranes in treating complex feed streams using simple cleaning protocols.

Anti-fouling PVDF membranes incorporating photocatalytic biochar-TiO2 composite for lignin recycle

In this study, a photocatalytic biochar-TiO₂ (C-Ti) composite was prepared using lignin as carbon precursor, and blended with PVDF polymer to fabricate PVDF/C-Ti MMMs via non-solvent induced phase inversion. The prepared membrane demonstrates both 1.5 times higher initial and recovered fluxes than the similarly prepared PVDF/TiO₂ membrane, suggesting the C-Ti composite can help maintain higher photodegradation efficiency and better anti-fouling performance. In addition, the comparison of PVDF/C-Ti membrane against pristine PVDF membrane show that the reversible fouling and photodegradation reversible fouling of BSA increased from 10.1% to 6.4%-35.1% and 26.6%, respectively. And the FRR of PVDF/C-Ti membrane was 62.12%, 1.8 times that of PVDF membrane. The PVDF/C-Ti membrane was also applied for lignin separation, where the rejection to sodium lignin sulfonate was maintained at about 75%, and the flux recovery ratio after UV irradiation reached 90%. The demonstrated the advantages of PVDF/C-Ti membrane in photocatalytic degradation and antifouling performance.

Microfiltration Membranes Modified with Zinc by Plasma Treatment

Polymer membranes play an important role in various filtration processes. The modification of a polyamide membrane surface by one-component Zn and ZnO coatings and two-component Zn/ZnO coatings is presented in this work. The technological parameters of the Magnetron Sputtering-Physical Vapor Deposition method (MS-PVD) for the coatings deposition process show an impact on the influence on the membrane's surface structure, chemical composition, and functional properties. The characterization of surface structure and morphology were analyzed by scanning electron microscopy. In addition, surface roughness and wettability measurements were also made. For checking the antibacterial activity, the two representative strains of bacteria Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) were used. The filtration tests showed that polyamide membranes covered with three types of coatings, one-component Zn coatings, ZnO coatings, and two-component Zn/ZnO coatings, presented similar properties. The obtained results show that using the MS-PVD method for modification of the membrane's surface is a very promising perspective in the prevention of biofouling.