A global meta-analysis of phthalate esters in drinking water sources and associated health risks

Optimizing material circularity pathways in industrial waste streams: A decision-making model

The increasing pressures of environmental regulation and the introduction of new policy frameworks by various nations have accelerated the popularization of industrial solid waste management and recovery, underscoring the transition towards a circular economy. This paradigm shift emphasizes the importance of material recovery, reuse, and recycling of industrial waste to minimize environmental impact and enhance sustainability. Despite the availability of individual approaches for waste recovery, there exists a significant gap in the systematic selection of optimal recovery pathways that facilitate the reintegration of materials into the production cycle. Addressing this gap, our study introduces a novel optimization model designed to identify the most efficient material circularity routes that leverage both the technical and biological cycles of the circular economy framework. Utilizing the Genetic Algorithm optimization tool in MATLAB, our model prioritizes pathways that maximize material recovery and profit generation simultaneously. This dual-objective function serves as the cornerstone of our analysis, ensuring a balanced approach to environmental sustainability and economic viability. The model's efficacy was tested on pre-calculated quantities of fabric waste generated by the Biyagama Export Processing Zone, providing a practical case study for its application. Our findings reveal diverse scenarios under which the model can allocate varying weights to each objective, demonstrating its flexibility and utility as a decision-making tool for stakeholders in the waste management sector. The results indicate that the model is not only capable of optimizing waste circularity pathways for maximum material recovery and profit generation but also offers a customizable framework that can adapt to the specific priorities of different stakeholders. This research contributes to the existing body of knowledge by filling a critical gap in the selection of sustainable waste recovery pathways, offering a practical, optimized, and scalable solution that can significantly advance the goals of the circular economy in the industrial sector.•Decision-making model for stakeholders in the waste management sector.•Model selects the best material recovery pathways.•Textile industrial fabric waste stream used as a pilot to test the model's effectiveness.

Socio-environmental externalities of sewage waste management

Conventional sewage management is expensive and inefficient, putting the environment and public health at risk, making access to sewage services difficult for everyone. Reusing sewage waste has agricultural and economic potential, but can contain harmful contaminants if not treated properly. This review is based on the hypothesis that the destination of sewage waste generates environmental and social externalities, which have not yet been widely compared. With the aim of identifying, from the literature, the socio-environmental externalities generated by different sewage waste management approaches, a systematic review of the literature was carried out, including 244 documents, with 50 % of these discussing impacts of conventional treatment and 37 % analyzing the reuse of waste. The main impacts and externalities were evaluated in three situations: untreated sewage, treated sewage, and reused waste. The results indicate that sewage waste has an underutilized economic value and can generate revenue, reduce operational costs and electricity expenses. Six negative externalities generated by conventional sewage treatment were identified: health costs; environmental cleaning; carbon offsetting; damage to tourism; damage to fishing and agriculture; and real estate depreciation. In reuse, there is a risk of two negative externalities: health costs and environmental cleaning, but two positive externalities were also identified: the reduction of phosphate rock mining and the neutralization of carbon credits. The complexity of the transition to sustainable sewage treatment practices is highlighted given the lack of consensus on the safe use of sewage waste, the lack of regulatory standardization, implementation costs and differences in regional parameters, highlighting the need for preliminary experimentation in a multidisciplinary and contextualized approach, considering comparative externalities among the available sewage waste management possibilities.

Low-disturbance land remediation using vertical groundwater circulation well technology: The first commercial deployment in an operational chemical plant

Soil and groundwater contamination by organic pollutants from chemical plants presents significant risks to both environmental and human health. We report a significant field trial where a chemical plant in operation showed soil and groundwater pollution, as verified by sampling and laboratory tests. While many remediation methods are effective, they often require the temporary shutdown of plant operations to install necessary equipment. This paper introduces a novel combination of low-disturbance contaminant remediation technologies, including groundwater circulation well (GCW), pump and treat (P&T), and in-situ chemical oxidation (ISCO) technologies, that can be applied on the premises of an active plant without halting production. The groundwater with dissolved contaminants is removed through P&T and GCW, while GCW enhances ISCO that focus on eliminating the remaining hard-to-pump contaminants. Results show: (1) after two years of remediation effort, the contaminant levels in soil and groundwater were significantly reduced; (2) the average concentration reduction rate of four contaminants, including 1,2-dichloroethane, methylbenzene, ethylbenzene, and M&P-xylene, exceeds 98 %; (3) the presented remediation strategy results in the improvement of remediation efficiency. Specifically, the concentration of 1,2-dichloroethane in observation wells dropped from 40,550.7 μg/L to 44.6 μg/L. This study offers a first-of-its-kind commercial deployment of a GCW-based remediation strategy in an active plant setting. Moreover, the combined remediation approach presented here can serve as a model for designing contaminant remediation projects that require minimal operational disruption.

Global performance and trends of research on emerging contaminants in sewage sludge: A Bibliometric Analysis from 1990 to 2023

The pervasive occurrence of emerging contaminants (ECs) in sewage sludge (SWS) poses significant safety challenges concerning the processing, disposal, and secure application, ultimately jeopardizing both human health and the ecological environment. To comprehensively comprehend the evolutionary trajectories, present state, and research advancements in the field of ECs in SWS, a systematic was conducted, scrutinizing the annual publication quantity, disciplinary distribution, core authors, involved nations/regions, pertinent keywords, and citation status of 2082 research publications related to ECs in SWS from 1990 to 2023. The results indicate a substantial upward trajectory in the research literature pertaining to ECs in SWS. The study of ECs in SWS encompasses 78 disciplines, including Environmental Sciences, Environmental Engineering, and Water Resources. China, Spain, and the USA ranked among the top three countries in terms of both total publications and citation frequency. The majority of publications were published in reputable high-impact journals such as Science of the Total Environment, Chemosphere, and Bioresource Technology. Based on high-frequency keywords, co-occurrence networks of keywords, and keywords burst analysis, it is found that the occurrence and environment behavior of ECs in SWS (ARGs, microplastics, PPCPs, and POPs), the detection and analytical methods, the impact on SWS treatment and disposal processes, and the accumulation and ecological risks in plants and soil during SWS land utilization, are the main research directions and hot topics in this field. In the future, the study of the impact of SWS treatment technologies on ECs removal is expected to receive increased research attention.

Concentration levels of phthalate metabolites in wild boar hair samples

Phthalates used in the industry penetrate the environment and negatively affect humans and animals. Hair samples seem to be the best matrix for studies on long-term exposure to phthalates, but till now they were used only in investigations on humans. Moreover, the knowledge of the wild terrestrial animal exposure to phthalates is extremely limited. This study aimed to establish of concentration levels of selected phthalate metabolites (i.e. monomethyl phthalate-MMP, monoethyl phthalate-MEP, mono-isobutyl phthalate-MiBP, monobutyl phthalate-MBP, monobenzyl phthalate-MBzP, mono-cyclohexyl phthalate-MCHP, mono(2-ethylhexyl) phthalate-MEHP and mono-n-octyl phthalate-MOP) in wild boar hair samples using liquid chromatography with mass spectrometry (LC-MS) analysis. MEHP was noted in 90.7% of samples with mean 66.17 ± 58.69 pg/mg (median 49.35 pg/mg), MMP in 59.3% with mean 145.1 ± 310.6 pg/mg (median 64.45 pg/mg), MiBP in 37.0% with mean 56.96 ± 119.4 pg/mg (median < limit of detection-LOD), MBP in 35.2% with mean 19.97 ± 34.38 pg/mg (median < LOD) and MBzP in 1.9% with concentration below limit of quantification. MEP, MCHP, and MOP have not been found in wild boar hair samples during this study. The results have shown that wild boars are exposed to phthalates and hair samples may be used as a matrix during studies on levels of phthalate metabolites in wild animals.

Upcycling of post-consumer polyethylene terephthalate bottles into aluminum-based metal-organic framework adsorbents for efficient orthophosphate removal

2-Phosphonobutane-1,2,4,-tricarboxylic acid (PBTC) is an orthophosphate compound widely used as an antiscalant chemical and corrosion inhibitor in manufacturing. However, PBTC poses persistent environmental concerns due to its stability and resistance to conventional water treatment. In addressing the issues of PBTC in aquatic systems, Al-based metal-organic frameworks (MOFs) have been developed and applied as sustainable adsorbents. The materials are synthesized from terephthalic acid (TPA) linkers derived from upcycling products of post-consumer polyethylene terephthalate (PET) bottles. The PET-derived linker was prepared using alkaline hydrolysis followed by acidification and employed in forming MIL-53 (Al), with a comparative assessment against the corresponding MOFs made from commercial-grade TPA. The structures and properties of the materials were characterized with microscopic and spectroscopic methods. The synthesized adsorbents achieved a phosphate adsorption capacity of 826 mg/g at pH 5, with kinetics fitting a pseudo-second-order model and isotherm patterns aligning with Langmuir, Freundlich, and Sips models, indicative of diverse adsorption on heterogeneous surfaces. The results highlight the role of electrostatic interactions and hydrogen bonding mechanisms in PBTC adsorption. The eco-friendly materials with high adsorption performance offer an innovative route for sustainable waste management and water purification.

Optimizing removal of antiretroviral drugs from tertiary wastewater using chlorination and AI-based prediction with response surface methodology

Chemical and pharmaceutical chemicals found in water sources create substantial risks to human health and the environment. The presence of pharmaceutical contaminants in water can cause antibiotic resistance development, toxicity to aquatic organisms, and endocrine disruption. Hence, the elimination of chemicals and other contaminants from wastewater prior to its release is a burgeoning concern in the domains of engineering and science. The use of treatment technologies in wastewater treatment plants can remove pharmaceutical contaminants through the oxidation process. However, many traditional wastewater treatment plants lack the advanced monitoring tools required to detect low concentrations of pharmaceuticals. Without the ability to detect these compounds, it's challenging to treat them effectively. The goal of this study was to use Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) algorithms to model and improve how Nevirapine and Efavirenz break down in different chlorination conditions. The RSM analysis revealed statistically significant models (F-values: Nevirapine, pH-t: 108.15, T-t: 76.55, ICC-t: 110.84), indicating a strong correlation between operational parameters (pH, temperature, and initial chlorine concentration) and degradation behavior. The ANN model accurately predicted the degradation of both Nevirapine and Efavirenz under various chlorination conditions, as confirmed by analyzing actual-predicted graphs, residual plots, and Mean Squared Error (MSE) values. The ANN model using ICC-t achieved the highest MOD value of 31.31 % for Nevirapine. The ANN model based on ICC-t yielded a maximum MOD value of 16.06 % for Efavirenz. These findings provide valuable insights into optimizing chlorination processes for better removal of these pharmaceutical contaminants from water.

Insight into effect of polyethylene microplastic on nitrogen removal in moving bed biofilm reactor: Focusing on microbial community and species interactions

Microplastics (MPs) pollution has emerged as a global concern, and wastewater treatment plants (WWTPs) are one of the potential sources of MPs in the environment. However, the effect of polyethylene MPs (PE) on nitrogen (N) removal in moving bed biofilm reactor (MBBR) remains unclear. We hypothesized that PE would affect N removal in MBBR by influencing its microbial community. In this study, we investigated the impacts of different PE concentrations (100, 500, and 1000 μg/L) on N removal, enzyme activities, and microbial community in MBBR. Folin-phenol and anthrone colorimetric methods, oxidative stress and enzyme activity tests, and high-throughput sequencing combined with bioinformation analysis were used to decipher the potential mechanisms. The results demonstrated that 1000 μg/L PE had the greatest effect on NH4+-N and TN removal, with a decrease of 33.5 % and 35.2 %, and nitrifying and denitrifying enzyme activities were restrained by 29.5-39.6 % and 24.6-47.4 %. Polysaccharide and protein contents were enhanced by PE, except for 1000 μg/L PE, which decreased protein content by 65.4 mg/g VSS. The positive links of species interactions under 1000 μg/L PE exposure was 52.07 %, higher than under 500 μg/L (51.05 %) and 100 μg/L PE (50.35 %). Relative abundance of some metabolism pathways like carbohydrate metabolism and energy metabolism were restrained by 0.07-0.11 % and 0.27-0.4 %. Moreover, the total abundance of nitrification and denitrification genes both decreased under PE exposure. Overall, PE reduced N removal by affecting microbial community structure and species interactions, inhibiting some key metabolic pathways, and suppressing key enzyme activity and functional gene abundance. This paper provides new insights into assessing the risk of MPs to WWTPs, contributing to ensuring the health of aquatic ecosystems.

Definition, detection, and tracking of nanowaste in foods: Challenges and perspectives

Commercial applications of nanotechnology in the food industry are rapidly increasing. Accordingly, there is a simultaneous increase in the amount and diversity of nanowaste, which arise as byproducts in the production, use, disposal, or recycling processes of nanomaterials utilized in the food industry. The potential risks of this nanowaste to human health and the environment are alarming. It is of crucial significance to establish analytical methods and monitoring systems for nanowaste to ensure food safety. This review provides comprehensive information on nanowaste in foods as well as comparative material on existing and new analytical methods for the detection of nanowaste. The article is specifically focused on nanowaste in food systems. Moreover, the current techniques, challenges as well as potential use of new and progressive methods are underlined, further highlighting advances in technology, collaborative efforts, as well as future perspectives for effective nanowaste detection and tracking. Such detection and tracking of nanowaste are required in order to effectively manage this type ofwasted in foods. Although there are devices that utilize spectroscopy, spectrometry, microscopy/imaging, chromatography, separation/fractionation, light scattering, diffraction, optical, adsorption, diffusion, and centrifugation methods for this purpose, there are challenges to be overcome in relation to nanowaste as well as food matrix and method characteristics. New technologies such as radio-frequency identification, Internet of things, blockchain, data analytics, and machine learning are promising. However, the cooperation of international organizations, food sector, research, and political organizations is needed for effectively managing nanowaste. Future research efforts should be focused on addressing knowledge gaps and potential strategies for optimizing nanowaste detection and tracking processes.

Recent progression in MXene-based catalysts for emerging photocatalytic applications of CO2 reduction and H2 production: A review

The development of advanced materials for efficient photocatalytic H2 production and CO2 reduction is highly recommended for addressing environmental issues and producing clean energy sources. Specifically, MXenes have emerged as two-dimensional (2D) materials extensively used as high-performance cocatalysts in photocatalyst systems owing to their outstanding features of structure and properties such as high conductivity, large specific surface area, and abundant active sites. Nevertheless, there is a lack of deep and systematic studies concerning the application of these emerging materials for CO2 reduction reaction (CRR) and H2 production (HER). This review first outlines the essential features of MXenes, encompassing the synthesis methods, composition, surface terminations, and electronic properties, which make them highly active as cocatalysts. It then examines the recent progress in MXene-based photocatalysts, emphasizing the synergy achieved by coupling MXenes as co-catalysts with semiconductors, utilizing MXenes as a support for the consistent growth of photocatalysts, leading to finely dispersed nanoparticles, and exploiting MXene as exceptional precursors for creating MXene/metal oxide photocomposite. The roles of engineering surface terminations of MXene cocatalysts, MXene quantum dots (QDs), and distinctive morphologies in MXenes-based photocatalyst systems to enhance photocatalytic activity for both HER and CRR have been explored both experimentally and theoretically using DFT calculations. Challenges and prospects for MXene-based photocatalysts are also addressed. Finally, suggestions for further research and development of effective and economical MXenes/semiconductors strategies are proposed. This comprehensive review article serves as a valuable reference for researchers for applying MXenes in photocatalysis.

Terrestrial bioassays for assessing the biochemical and toxicological impact of biosolids application derived from wastewater treatment plants

Wastewater treatment plants (WWTP) are facilities where municipal wastewater undergoes treatment so that its organic load and its pathogenic potential are minimized. Sewage sludge is a by-product of this process and when properly treated is preferentially called "biosolids". These treatments may include some or most of the following: thickening, dewatering, drying, digestion, composting, liming. Nowadays it is almost impossible to landfill biosolids, which however can well be used as crop fertilizers. Continuous or superfluous biosolids fertilization may negatively affect non-target organisms such as soil macro-organisms or even plants. These effects can be depicted through bioassays on terrestrial animals and plants. It has been shown that earthworms have been affected to various degrees on the following endpoints: pollutants' bioaccumulation, viability, reproduction, avoidance behavior, burrowing behavior. Collembola have been affected on viability, reproduction, avoidance behavior. Other terrestrial organisms such as nematodes and diplopods have also shown adverse health effects. Phytotoxicity have been caused by some biosolids regimes as measured through the following endpoints: seed germination, root length, shoot length, shoot biomass, root biomass, chlorophyll content, antioxidant enzyme activity. Very limited statistical correlations between pollutant concentrations and toxicity endpoints have been established such as between juvenile mortality (earthworms) and As or Ba concentration in the biosolids, between juvenile mortality (collembola) and Cd or S concentration in the biosolids, or between phytotoxicity and some extractable metals in leachates or aquatic extracts from the biosolids; more correlations between physicochemical characteristics and toxicity endpoints have been found such as between phytotoxicity and ammonium N in biosolids or their liquid extracts, or between phytotoxicity and salinity. An inverse correlation between earthworm/collembola mortality and stable organic matter has also been found. Basing the appropriateness of biosolids only on chemical analyses for pollutants is not cost-effective. To enable risk characterization and subsequent risk mitigation it is important to apply a battery of bioassays on soil macro-organisms and on plants, utilizing a combination of endpoints and established protocols. Through combined analytical quantification and toxicity testing, safe use of biosolids in agriculture can be achieved.

Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation

Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58-68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.

A method for determining the recycling value of unprocessed municipal solid waste in one cubic meter waste composition analysis technique

The transition from conventional landfill-centric waste management to resource-centric methodologies necessitates an enhanced comprehension of municipal solid waste (MSW) composition and its inherent value. Existing methodologies documented in the literature exhibit a lack of standardization, impending the formulation of a systematic engineering approach for MSW characterization and valuation. This study introduces a methodology specifically tailored to discern the composition of waste origination from urban households and evaluate its recyclability within the confines of a circular economy framework, Employing a volume-based measurement approach, aims to estimate the recycling value of waste materials. The study's outcomes contribute significantly to quantifying the potential recycling value that accrues to society. Furthermore, the validation of the proposed protocol elucidates the dynamic nature of recyclable value as it traverses the intricate pathways of the waste supply chain. This insight facilitates the formulation of commercial models grounded in circular economy principles for the effective management of household solid waste. Empirical findings reveal that the total recycling value fluctuates within the range of USD 3.39 and USD 5.76 per cubic meter of waste volume, contingent upon the specific waste composition at the experiment site. Additionally, the proposed methodology uncovers the nuanced variability in MSW composition and recycling value across diverse household collection patterns, identifying mixed plastic, paper, cardboard, mixed MSW, and clothing as primary constituents. The application of this methodology extends beyond mere quantification, providing a foundational framework for simulating the latent recycling value embedded within MSW samples. This, in turn, offers invaluable support to strategy developers, policymakers, and entrepreneurial ventures engaged in the sustainable management of household solid waste. In essence, this study establishes the groundwork for a comprehensive understanding of MSW composition and its recyclability, facilitating informed decision-making in the pursuit of a circular economy.•Novel methodology based on one cubic meter (1m3) composition analysis of Municipal Solid Waste (MSW).•A new method to evaluate the recycling value of Municipal Solid Waste.•A basis for business model development for the waste-to-resource conversion model.

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Innovative tarantula hair-inspired washing machine filters for enhanced microfiber capture

Aquatic environments are being polluted by microplastics primarily originating from the washing of synthetic textiles. Microfibers (MF), which are microplastics in synthetic fibers, are consistently introduced into the environment with each domestic laundry cycle. To address this issue, we developed a specialized MF capture "barbed filter" (BF) by transforming PET monofilaments of different diameters (0.4, 0.6, and 0.8 mm) into structures that closely resemble the characteristics of tarantula urticating hairs. BFs feature sharp barbs that effectively capture and retain microfibers of diverse lengths, surpassing the performance of conventional control filters. The BFs had a retention efficiency of 88-91 %, while the CFs had an efficiency of 79-86 %. Our findings revealed that the barbed filter significantly outperformed the conventional control filter in capturing microfibers due to its smaller pore size, shorter pore distance, and unique filter shape. This design not only enhances the surface area and friction, facilitating microfibril strong entrapment but also minimizes the probability of microfibril passage through the filter. This research offers a promising solution for reducing microfibril release from laundry and textile industrial wastewater. The implementation of BFs in real life has the potential to significantly reduce microplastic pollution and promote a cleaner and more sustainable environment.

Phthalate acid esters: A review of aquatic environmental occurrence and their interactions with plants

The increasing use of phthalate acid esters (PAEs) in various applications has inevitably led to their widespread presence in the aquatic environment. This presents a considerable threat to plants. However, the interactions between PAEs and plants in the aquatic environment have not yet been comprehensively reviewed. In this review, the properties, occurrence, uptake, transformation, and toxic effects of PAEs on plants in the aquatic environment are summarized. PAEs have been prevalently detected in the aquatic environment, including surface water, groundwater, seawater, and sediment, with concentrations ranging from the ng/L or ng/kg to the mg/L or mg/kg range. PAEs in the aquatic environment can be uptake, translocated, and metabolized by plants. Exposure to PAEs induces multiple adverse effects in aquatic plants, including growth perturbation, structural damage, disruption of photosynthesis, oxidative damage, and potential genotoxicity. High-throughput omics techniques further reveal the underlying toxicity molecular mechanisms of how PAEs disrupt plants on the transcription, protein, and metabolism levels. Finally, this review proposes that future studies should evaluate the interactions between plants and PAEs with a focus on long-term exposure to environmental PAE concentrations, the effects of PAE alternatives, and human health risks via the intake of plant-based foods.

Exploring the antibiofilm and toxicity of tin oxide nanoparticles: Insights from in vitro and in vivo investigations

BACKGROUND INFORMATION

The advancement of biological-mediated nanoscience towards higher levels and novel benchmarks is readily apparent, owing to the use of non-toxic synthesis processes and the incorporation of various additional benefits. This study aimed to synthesize stable tin oxide nanoparticles (SnO2-NPs) using S. rhizophila as a mediator.

METHODS

The nanoparticles that were created by biosynthesis was examined using several analytical techniques, including Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), UV-visible (UV-vis) spectroscopy, and energy dispersive X-ray spectroscopy (EDS).

RESULTS

The results obtained from the characterization techniques suggest that S. rhizophila effectively catalyzed the reduction of SnCl2 to SnO2-NPs duration of 90 min at ambient temperature with the ƛmax of 328 nm. The size of the nano crystallite formations was measured to be 23 nm. The present study investigates nanoscale applications' antibacterial efficacy against four bacterial strains, including Klebsiella Sp, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. The observed zone of inhibition for the nanoparticles (NPs) varied from 10 to 25 mm. The research findings demonstrate that the nanoparticles (NPs) are effective as antibacterial, phytotoxic, and cytotoxic agents.

Phthalate exposure and blood pressure in U.S. children aged 8-17 years (NHANES 2013-2018)

BACKGROUND

Current evidence from epidemiologic studies suggested that phthalate metabolites might be associated with blood pressure (BP) changes. However, the special relationship between phthalate metabolites and BP changes in children has not been clearly elucidated in existing researches.

OBJECTIVES

We investigated the links between phthalate metabolites and various BP parameters, including systolic/diastolic BP, mean arterial pressure (MAP), and the presence of hypertension.

METHODS

The population sample consisted of 1036 children aged 8 to 17 years from the 2013-2018 NHANES in the United States. High performance liquid chromatography-electrospray ionization-tandem mass spectrometry was used to measure urinary concentrations of 19 phthalate metabolites. Systolic/diastolic BP were derived from the average of three valid measurements, and MAP was calculated as (systolic BP + 2 × diastolic BP)/3. Hypertension was defined as mean systolic BP and/or diastolic BP that was ≥ 95th percentile for gender, age, and height reference. Linear regression, logistic regression, and weighted quantile sum (WQS) regression models were employed to assess the associations between phthalate exposure and systolic/diastolic BP, MAP, and hypertension.

RESULTS

Ten of 19 phthalate metabolites including MCNP, MCOP, MECPP, MBP, MCPP, MEP, MEHHP, MiBP, MEOHP, and MBzP had detection frequencies > 85% with samples more than 1000. MCNP, MCOP, MECPP, MBP, MCPP, MEHHP, MiBP, MEOHP, and MBzP were generally negatively associated with systolic/diastolic BP and MAP, but not protective factors for hypertension. These associations were not modified by age (8-12 and 13-17 years) or sex (boys and girls). The above-mentioned associations were further confirmed by the application of the WQS analysis, and MCOP was identified as the chemical with the highest weight.

CONCLUSION

Phthalate metabolites were associated with modest reductions in systolic/diastolic BP, and MAP in children, while appeared not protective factors for hypertension. Given the inconsistent results among existing studies, our findings should be confirmed by other cohort studies.

The identification of a correlation between lipid content in the model diatom Phaeodactylum tricornutum and pH treatment strategies

pH treatment promotes single-cell lipid accumulation and significantly affects microalgae growth. This study investigates the correlation between lipid content and environmental pH using the model diatom Phaeodactylum tricornutum (P. tricornutum). We compared three distinct pH treatment strategies-continuous, intermittent, and a two-phase culture-in P. tricornutum. Rigorous analysis of chlorophyll content, cell density, and lipid content indicated that ongoing pH treatment at pH 9.5 (CHES) emerged as the most effective approach for lipid accumulation in P. tricornutum. The CHES buffer treatment significantly boosted total lipid yield and led to a reduction in protein content. Carbohydrate content experienced a slight decline under CHES buffer treatment, but changes were observed in the activities of key enzymes. Specifically, [acyl-carrier-protein] S-malonyltransferase (MAT) activity decreased after 3 days in the control treatment, while no significant change was noted under the CHES buffer treatment. In contrast, diacylglycerol O-acyltransferase (DGAT) activity showed upregulation 2 and 3 days post-CHES buffer treatment. Moreover, the study identified differentially expressed genes enriched in Gene Ontology (GO) terms associated with protein biosynthesis, photosynthesis, nucleoside metabolism, and transferase activity. These outcomes underscore the pivotal role of CHES buffer in orchestrating primary metabolism, potentially steering carbon flux towards lipogenesis. As a result, the potential of microalgae as a sustainable source of biofuels contributes significantly to the transition towards a more environmentally friendly energy landscape.

A critical review on the recent trends of photocatalytic, antibacterial, antioxidant and nanohybrid applications of anatase and rutile TiO2 nanoparticles

Titanium dioxide nanoparticles (TiO2 NPs) have become a focal point of research due to their widespread daily use and diverse synthesis methods, including physical, chemical, and environmentally sustainable approaches. These nanoparticles possess unique attributes such as size, shape, and surface functionality, making them particularly intriguing for applications in the biomedical field. The continuous exploration of TiO2 NPs is driven by the quest to enhance their multifunctionality, aiming to create next-generation products with superior performance. Recent research efforts have specifically focused on understanding the anatase and rutile phases of TiO2 NPs and evaluating their potential in various domains, including photocatalytic processes, antibacterial properties, antioxidant effects, and nanohybrid applications. The hypothesis guiding this research is that by exploring different synthesis methods, particularly chemical and environmentally friendly approaches, and incorporating doping and co-doping techniques, the properties of TiO2 NPs can be significantly improved for diverse applications. The study employs a comprehensive approach, investigating the effects of nanoparticle size, shape, dose, and exposure time on performance. The synthesis methods considered encompass both conventional chemical processes and environmentally friendly alternatives, with a focus on how doping and co-doping can enhance the properties of TiO2 NPs. The research unveils valuable insights into the distinct phases of TiO2 NPs and their potential across various applications. It sheds light on the improved properties achieved through doping and co-doping, showcasing advancements in photocatalytic processes, antibacterial efficacy, antioxidant capabilities, and nanohybrid applications. The study concludes by emphasizing regulatory aspects and offering suggestions for product enhancement. It provides recommendations for the reliable application of TiO2 NPs, addressing a comprehensive spectrum of critical aspects in TiO2 NP research and application. Overall, this research contributes to the evolving landscape of TiO2 NP utilization, offering valuable insights for the development of innovative and high-performance products.

Investigation on the effect of several parameters involved in the biodegradation of polyethylene (PE) and low-density polyethylene (LDPE) under various seawater environments

This work investigates the biodegradation of polyethylene (PE) and low-density polyethylene (LDPE) and the leaching of their harmful additives. Micro/macro-plastics of both types were subjected to different laboratory-controlled conditions for 3 months. Gas Chromatography-Mass Spectroscopy (GC-MS) results revealed that leachate concentrations ranged from 0.40 ± 0.07 μg/L to 96.36 ± 0.11 μg/L. It was concluded that the additives' leaching process was promoted by light. However, light was not the only factor examined; microorganisms, pH, salinity, aeration/mixing and temperature influenced the biodegradation process, too. GC-MS results showed a prodigious impact on the biodegradation process when Pseudomonas aeruginosa was added to the artificial seawater compared to plastics exposed to light/air only. Scanning Electron Microscopy (SEM) micrographs demonstrated a significant alteration in the plastics' morphologies. Similarly, Fourier-Transform Infrared Spectroscopy (FTIR) spectra showed obvious changes in plastics characteristic peaks, especially microplastics. Furthermore, it was shown that PE was more susceptible to degradation/biodegradation than LDPE. Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) findings showed that some toxic metals were present in water samples after experiments, with concentrations above the permissible limits. For instance, bio-augmentation/bio-stimulation experiments showed that the concentrations of Pb, Sr, and Zn were 0.59 mg/L, 70.09 mg/L, and 0.17 mg/L, respectively; values above the permissible limits. It is crucial to emphasise that plastics must be meticulously engineered to avoid environmental and human impacts, originated from their degradation by-products. Furthermore, a holistic approach engaging stakeholders, researchers, policymakers, industries and consumers, is essential to effectively tackle the global challenge of marine plastic pollution.

Iron-doped swine bone char as hydrogen peroxide activator for efficient removal of acetaminophen in water

Bone char is a functional material obtained by calcining animal bones and is widely used for environmental remediation. In this work, iron was inserted into porcine bone-derived bone char via ion exchange to synthesize iron-doped bone char (Fe-BC) for efficient catalysis of hydrogen peroxide. This is the first time that Fe-BC has been used as a catalyst for the activation of H2O2. The effectiveness of the Fe-BC catalyst was influenced by the annealing temperature and the amount of iron doping. The results showed that the activation of H2O2 by the Fe-BC catalyst with the best catalytic performance could achieve 97.6% of APAP degradation within 30 min. Insights from electron paramagnetic resonance (EPR), free radical scavenging experiments and linear sweep voltammetry (LSV) proposed a reaction mechanism based on free radicals dominated degradation pathways (OH and O2-). Iron served as the primary active site in Fe-BC, with defect sites and oxygen-containing groups in the catalyst also contributing to the removal of pollutants. The Fe-BC/H2O2 system demonstrated resilience to interference from common anions (Cl-, NO3-, SO42- and HCO3-) in water, but was less effective against humic acid (HA). Based on the detection of intermediates produced during APAP degradation, possible degradation pathways of APAP were proposed and the toxicity of intermediates was evaluated. This work provides fresh insights into the use of heterogeneous Fenton catalysts for the removal of organic pollutants from water.

Enhancing docosahexaenoic acid production in Aurantiochytrium species using atmospheric and room temperature plasma mutagenesis and comprehensive multi-omics analysis

Aurantiochytrium sp. belongs to marine heterotrophic single-cell protist, which is an important decomposer in marine ecosystem. Aurantiochytrium sp. has gained notoriety because of its ability to accumulate high-value docosahexaenoic acid (DHA), but the key factors of DHA synthesis were unclear at present. In this study, Atmospheric and Room Temperature Plasma technology was applied to the mutagenic breeding of Aurantiochytrium sp., and transcriptomics and proteomics were adopted to analyze the DHA-biosynthesis mechanism. According to the growth and DHA accumulation profiles, the mutant strain Aurantiochytrium sp. R2A35 was selected. The DHA content in total lipids was greatly improved from 49.39 % of the wild strain R2 to 63.69 % of the mutant strain. Moreover, the DHA content in the biomass of Aurantiochytrium sp. R2A35 as 39.72 % was the highest DHA productivity reported so far. The differentially expressed genes distinguished from transcriptome and the TMT-identified differential proteins distinguished from proteome confirmed that the expression of acetyl-CoA carboxylase and ketoacyl reductase was up-regulated by 4.78-fold and 6.95-fold, respectively and the fatty acid synthase was concurrently down-regulated by 2.79-fold, so that more precursor was transported to the polyketide synthase pathway, thereby increasing the DHA yield in Aurantiochytrium sp. R2A35. This research would provide reference for the DHA metabolism process and contribute to the understanding of the decomposer - Aurantiochytrium sp. in marine ecosystems.

Recent advances in remediation strategies for mitigating the impacts of emerging pollutants in water and ensuring environmental sustainability

The proliferation of emerging pollutants (EPs), encompassing a range of substances such as phthalates, phenolics, pharmaceuticals, pesticides, personal care products, surfactants, and disinfection agents, has become a significant global concern due to their potential risks to the environment and human well-being. Over the past two decades, numerous research studies have investigated the presence of EPs in wastewater and aquatic ecosystems, with the United States Environmental Protection Agency (USEPA) categorizing these newly introduced chemical compounds as emerging contaminants due to their poorly understood impact. EPs have been linked to adverse health effects in humans, including genotoxic and cytotoxic effects, as well as conditions such as obesity, diabetes, cardiovascular disease, and reproductive abnormalities, often associated with their estrogenic action. Microalgae have shown promise in the detoxification of both inorganic and organic contaminants, and several large-scale microalgal systems for wastewater treatment have been developed. However, the progress of algal bioremediation can be influenced by accidental contaminations and operational challenges encountered in pilot-scale research. Microalgae employ various processes, such as bioadsorption, biouptake, and biodegradation, to effectively remediate EPs. During microalgal biodegradation, complex chemical compounds are transformed into simpler substances through catalytic metabolic degradation. Integrating algal bioremediation with existing treatment methodologies offers a viable approach for efficiently eliminating EPs from wastewater. This review focuses on the use of algal-based biological remediation processes for wastewater treatment, the environmental impacts of EPs, and the challenges associated with implementing algal bioremediation systems to effectively remove emerging pollutants.

Combined Astragalus, vitamin C, and vitamin E alleviate DEHP-induced oxidative stress and the decreased of insulin synthesis and secretion in INS-1 cells

Di-(2-ethylhexyl)-phthalate (DEHP), a common Phthalic acid ester (PAEs), has been reported to be associated with diabetes mellitus, yet the underlying mechanisms remain unknown. Combined nutrient interventions have been shown to alleviate the diabetic toxicity of DEHP. However, the effects and mechanisms of the combined intervention of Astragalus and vitamins (C and E) are currently unknown. In this study, we investigated the potential mechanisms of DEHP-induced diabetes mellitus through transcriptome analysis and vitro experiments using rat insulinoma cells (INS-1 cells). Furthermore, we explored the protection of the combined Astragalus, vitamin C, and vitamin E on DEHP-induced diabetes mellitus through these mechanisms. INS-1 cells in the logarithmic growth period were exposed to 125 umol/L DEHP followed by high-throughput sequencing analysis. The cell proliferation inhibition rate was determined using MTT assay for each group, and the cell apoptosis rate and intracellular ROS level were measured using flow cytometer. Finally, insulin levels and markers of oxidative stress were detected using ELISA kits in different groups. A total of 372 differentially expressed genes were found between the 125 umol/L DEHP and control groups, subsequent functional enrichment analyses indicated that DEHP induced oxidative stress and disturbed insulin levels. In INS-1 cells, the rate of cell proliferation inhibition, apoptosis, and the degree of oxidative stress increased concentration-dependently with increasing DEHP concentrations, while antioxidant intervention could reverse these changes. Insulin synthesis and secretion decreased after 240 μmol/L DEHP exposure stimulated by 25 mM glucose in INS-1 cells, also could antioxidant intervention alleviate these reductions. Based on these results, the underlying mechanism of DEHP impairing the function of INS-1 cells might be through apoptosis pathways induced by oxidative stress and direct reduction of insulin levels (both synthesis and secretion), while the optimal combination of Astragalus and vitamins (C and E) could exert an alleviating effect.