The cellular consequences of particulate matter pollutants in plants: Safeguarding the harmonious integration of structure and function

A hybrid system based on the combination of adsorption, electrocoagulation, and wetland treatment for the effective remediation of industrial wastewater from underground coal gasification (UCG)

The study verified the effectiveness of treating post-process underground coal gasification (UCG) wastewater, containing high loads of inorganic and organic pollutants, using constructed wetlands (CW) enhanced by hybrid adsorption and electrocoagulation (EC) techniques. Four different system configurations were tested: wetland, EC/wetland, adsorbent/wetland, and EC/adsorbent/wetland. Each experiment lasted 60 days. The feed and effluents from each treatment step were analysed for their basic physicochemical parameters such as metals and trace elements, phenols, sulphides, cyanides, total organic carbon (TOC), chemical oxygen demand (COD), biological oxygen demand (BOD), benzene, toluene, ethylene, xylene (BTEX), and polyaromatic hydrocarbons (PAHs). Systems with electrocoagulation proved to be effective in the case of metal removal. The best results were obtained for Fe, Ni, Sb and As (up to 96%, 98%, 94% and 82% respectively). The systems were ineffective in removing Mn. All tested systems showed the greatest effectiveness in the treatment of wastewater from phenols, BTEX and CN (almost 100% removal). CWs without preliminary electrocoagulation showed practically 100% effectiveness in removing BTEX after 14 days of treatment. Electrocoagulation was particularly effective in reduction of large quantity of PAH compounds (from 1228 μg/l to below 0.050 μg/l). Effective toxicity reduction from V class to II class after 60 days in comparison with meeting the requirements contained in the Best Available Techniques (BAT) document, showed that all tested systems were favorable in terms of UCG wastewater treatment. A significant decrease in toxicity was observed in just 14 days (around 90% reduction of toxicity measured in TU values for systems without adsorbent and around 75% for systems with adsorbent). The wastewater were still toxic due to the formation of degradation intermediates of organic compounds (BTEX, PAHs, phenol compounds), despite a significant decrease in the concentration of contaminants, therefore toxicity assessment should be one of the evaluation criteria for industrial wastewater treatment.

Shields against pollution: phytoremediation and impact of particulate matter on trees at Wigry National Park, Poland

This study examines the impact of airborne particulate matter (PM) and associated trace elements (TEs) on deciduous and coniferous trees at the edge of Wigry National Park in northeast Poland, focusing on pollution levels and the potential for phytoremediation. Researchers measured PM concentrations in the air and on the leaves of Picea abies, Quercus robur, and Corylus avellana, along with photosynthetic indicators (Fv/Fm ratio and performance index). The study found significant differences in pollution intensity across areas with varying levels of human activity. P. abies, an evergreen species, accumulated the highest PM levels (>200 μg/cm2), while Q. robur had the highest accumulation among deciduous trees (>50 μg/cm2). Trace elements such as Fe, Cu, Zn, Sr, and Cd were detected, with C. avellana being the most efficient in accumulating Cd (up to 7.5 mg/kg). The accumulation of pollutants correlated with reduced photosynthetic efficiency in trees closest to pollution sources. The findings suggest that strategically planting specific tree species can help mitigate air pollution in national parks and protect sensitive vegetation. Future research should explore the long-term effects of PM on forest health and the role of different species in phytoremediation.

Possibilities and prospects of bioplastics production from agri-waste using bacterial communities: Finding a silver-lining in waste management

To meet the need of the growing global population, the modern agriculture faces tremendous challenges to produce more food as well as fiber, timber, biofuels, etc.; hence generates more waste. This continuous growth of agricultural waste (agri-waste) and its management strategies have drawn the attention worldwide because of its severe environmental impacts including air, soil and water pollution. Similarly, growing concerns about the sustainable future have fuelled the development of biopolymers, substances occurring in and/or produced by living organisms, as substitute for different synthetic and harmful polymers, especially petroleum-based plastics. Now, the components of agri-waste offer encouraging opportunities for the production of bioplastics through mechanical and microbial procedures. Even the microbial, both bacterial and fungal, system results in lower energy consumption and better eco-friendly alternatives. The review mainly concentrates on cataloging and understanding the bacterial 'input' in developing bioplastics from diverse agri-waste. Especially, the bacteria like Cupriavidus necator, Chromatium vinosum, and Pseudomonas aeruginosa produce short- and medium-chain length poly(3-hydroxyalkanote) (P3HB) polymers using starch (from corn and potato waste), and cellulose (from sugarcane bagasse, corn husks waste). Similarly, C. necator, and transformant Wautersia eutropha produce P3HB polymer using lipid-based components (such as palm oil waste). Important to note that, the synthesis of these polymers are interconnected with the bacterial general metabolic activities, for example Krebs cycle, glycolysis cycle, β-oxidation, calvin cycle, de novo fatty acid syntheses, etc. Altogether, the agri-waste is reasonably low-cost feed for the production of bioplastics using bacterial communities; and the whole process certainly provide an opportunity towards sustainable waste management strategy.

Sansevieria trifasciata's specific metabolite improves tolerance and efficiency for particulate matter and volatile organic compound removal

Phytoremediation has become famous for removing particulate matter (PM) and volatile organic compounds (VOCs), but the ability is affected by plant health. Lately, the priming technique was a simple approach to studying improving plant tolerance against abiotic stress by specific metabolites that accumulated, known as "memory", but the mechanism underlying this mechanism and how long this "memory" was retained in the plant was a lack of study. Sansevieria trifasciata was primed for one week for PM and VOC stress to improve plant efficiency on PM and VOC. After that, the plant was recovered for two- or five-weeks, then re-exposed to the same stress with similar PM and VOC concentrations from cigarette smoke. Primed S. trifasciata showed improved removal of PMs entirely within 2 h and VOC within 24 h. The primed plant can maintain a malondialdehyde (MDA) level and retain the "memory" for two weeks. Metabolomics analysis showed that an ornithine-related compound was accumulated as a responsive metabolite under exposure to PM and VOC stress. Exogenous ornithine can maintain plant efficiency and prevent stress by increasing proline and antioxidant enzymes. This study is the first to demonstrate plant "memory" mechanisms under PM and VOC stress.

Air pollution mitigation and suspended particulate matter retention potential of selected plant species across seasonal variation in the urban area

Air pollution is a pressing environmental concern in urban areas, especially in densely populated cities like Delhi, India. However, plant species can effectively capture airborne suspended pollutants. Given this, the present study aimed to investigate the seasonal variations (pre- and post-monsoon) in the pollution-mitigating potential, biochemical characteristics, and suspended particulate matter (SPM) capturing capacities of select plant species in Delhi. Also, using biochemical parameters, plant morphology, and socioeconomic factors, the study computed tolerance indices such as the Air Pollution Tolerance Index (APTI) and Anticipated Performance Index (API). Ficus religiosa L. exhibited the highest APTI value of 11.94, while Polyalthia longifolia (Sonn.) Thwaites displayed the lowest 7.99 APTI value during the pre-monsoon. Ficus benghalensis L. showed the maximum SPM adhesion on the leaves, with a deposition of 1305.46 µg/cm2, whereas F. religiosa exhibited the lowest SPM deposition of 56.62 µg/cm2. Moreover, the statistical analysis indicated a positive correlation between ascorbic acid and chlorophyll content (R2 > 0.6) with APTI. Also, F. religiosa demonstrated a significant Pearson's correlation (P < 0.05) between chlorophyll content and SPM deposition during the pre-monsoon. The study highlighted the dynamic nature of plant-based air pollution mitigation. It offered valuable insights into the potential of green infrastructure as a sustainable solution for addressing air quality concerns in urban environments. The results emphasized the significance of selecting adequate plant species and considering seasonal variations in developing urban greening strategies to combat air pollution.

Evaluation of the effects of dust pollution on specific plant species near and around the marble mining site in Rajasthan, India

Airborne particles (dust pollution) pose a significant threat to both human and plant populations. Plant leaves act as crucial biofilters, capturing significant amounts of air pollution; this characteristic offers a valuable tool to measure local pollution levels and assess individual plant species' ability to intercept and mitigate harmful dust particles. The present study was carried out to asses the effect of responses of various plant species to dust pollution near and around the marble mining site comprising residential site, highway area, and Central University of Rajasthan as control. The anticipated pollution index, air pollution tolerance index (APTI), dust absorption capacity, metal accumulation index (MAI), and biochemical factors were used to evaluate plant responses. Azadirachta indica A. Juss. demonstrated the highest (29.0) and Vachellia nilotica L. showed lowest (5.6) APTI, respectively. A. indica showed maximum MAI values in comparison to other plant species situated at residential site. Additionally, monitoring of particulate matter (PM10) observed to highest at highway, followed by mining, residential, and control sites. Overall A. indica representing highest APTI and effective dust capturing capacity at all sites could serve as potential pollution sinks. V. nilotica, with its very low APTI, can be marked as biomonitoring tool for detecting dust pollution.

Food waste-based bio-fertilizers production by bio-based fermenters and their potential impact on the environment

Increasing food waste is creating a global waste (and management) crisis. Globally, ∼1.6 billion tons of food is wasted annually, worth ∼$1.2 trillion. By reducing this waste or by turning it into valuable products, numerous economic advantages can be realized, including improved food security, lower production costs, biodegradable products, environmental sustainability, and cleaner solutions to the growing world's waste and garbage management. The appropriate handling of these detrimental materials can significantly reduce the risks to human health. Food waste is available in biodegradable forms and, with the potential to speed up microbial metabolism effectively, has immense potential in improving bio-based fertilizer generation. Synthetic inorganic fertilizers severely affect human health, the environment, and soil fertility, thus requiring immediate consideration. To address these problems, agricultural farming is moving towards manufacturing bio-based fertilizers via utilizing natural bioresources. Food waste-based bio-fertilizers could help increase yields, nutrients, and organic matter and mitigate synthetic fertilizers' adverse effects. These are presented and discussed in the review.