A review of the effect of various ions on the properties and the clinical applications of novel bioactive glasses in medicine and dentistry

Tailoring of bioactive glass and glass-ceramics properties for in vitro and in vivo response optimization: a review

Bioactive glasses are inorganic biocompatible materials that can find applications in many biomedical fields. The main application is bone and dental tissue engineering. However, some applications in contact with soft tissues are emerging. It is well known that both bulk (such as composition) and surface properties (such as morphology and wettability) of an implanted material influence the response of cells in contact with the implant. This review aims to elucidate and compare the main strategies that are employed to modulate cell behavior in contact with bioactive glasses. The first part of this review is focused on the doping of bioactive glasses with ions and drugs, which can be incorporated into the bioceramic to impart several therapeutic properties, such as osteogenic, proangiogenic, or/and antibacterial ones. The second part of this review is devoted to the chemical functionalization of bioactive glasses using drugs, extra-cellular matrix proteins, vitamins, and polyphenols. In the third and final part, the physical modifications of the surfaces of bioactive glasses are reviewed. Both top-down (removing materials from the surface, for example using laser treatment and etching strategies) and bottom-up (depositing materials on the surface, for example through the deposition of coatings) strategies are discussed.

Human T-Cell Responses to Metallic Ion-Doped Bioactive Glasses

Biomaterials are extensively used as replacements for damaged tissue with bioactive glasses standing out as bone substitutes for their intrinsic osteogenic properties. However, biomaterial implantation has the following risks: the development of implant-associated infections and adverse immune responses. Thus, incorporating metallic ions with known antimicrobial properties can prevent infection, but should also modulate the immune response. Therefore, we selected silver, copper and tellurium as doping for bioactive glasses and evaluated the immunophenotype and cytokine profile of human T-cells cultured on top of these discs. Results showed that silver significantly decreased cell viability, copper increased the T helper (Th)-1 cell percentage while decreasing that of Th17, while tellurium did not affect either cell viability or immune response, as evaluated via multiparametric flow cytometry. Multiplex cytokines assay showed that IL-5 levels were decreased in the copper-doped discs, compared with its undoped control, while IL-10 tended to be lower in the doped glass, compared with the control (plastic) while undoped condition showed lower expression of IL-13 and increased MCP-1 and MIP-1β secretion. Overall, we hypothesized that the Th1/Th17 shift, and specific cytokine expression indicated that T-cells might cross-activate other cell types, potentially macrophages and eosinophils, in response to the scaffolds.

A pH-neutral bioactive glass coated 3D-printed porous Ti6Al4V scaffold with enhanced osseointegration

Osseointegration is vital for the success of non-degradable implants like those made of titanium alloys. In order to promote osseointegration, implants are made porous, providing space for bone ingrowth. Despite extensive optimization of the pore geometry and porosity, bone ingrowth into implants is still marginal; further modification to promote bone ingrowth as well as osseointegration becomes paramount. In this study, a pH neutral bioactive glass with the composition of 10.8% P₂O₅-54.2% SiO₂-35% CaO (mol%; hereinafter referred to as PSC) was successfully coated on 3D-printed porous Ti6Al4V scaffolds using an in situ sol-gel method. This PSC coating is strongly bonded to the substrate and quickly induces the formation of hydroxyapatite on the scaffold surface upon contact with body fluid. In vitro, the PSC-coated Ti6Al4V scaffolds showed superior biocompatibility, cell proliferation promotion, cell adhesion, osteogenic differentiation and mineralization compared to their bare counterparts, implying better osseointegration. In vivo experiments confirmed this expectation; after being implanted, the coated scaffolds had more bone ingrowth and osseointegration, and consequently, higher push-out strength was achieved, proving the validity of the proposed concept in this study. In conclusion, PSC coating on 3D-printed porous Ti6Al4V scaffolds can improve osteogenesis, bone ingrowth, and osseointegration. Together with the versatility of this in situ sol-gel coating method, titanium alloy implants with better biological performances may be developed for immediate clinical applications.

Ceramic Nanomaterials in Caries Prevention: A Narrative Review

Ceramic nanomaterials are nanoscale inorganic metalloid solids that can be synthesised by heating at high temperatures followed by rapid cooling. Since the first nanoceramics were developed in the 1980s, ceramic nanomaterials have rapidly become one of the core nanomaterials for research because of their versatility in application and use in technology. Researchers are developing ceramic nanomaterials for dental use because ceramic nanoparticles are more stable and cheaper in production than metallic nanoparticles. Ceramic nanomaterials can be used to prevent dental caries because some of them have mineralising properties to promote the remineralisation of tooth tissue. Ceramic minerals facilitate the remineralisation process and maintain an equilibrium in pH levels to maintain tooth integrity. In addition, ceramic nanomaterials have antibacterial properties to inhibit the growth of cariogenic biofilm. Researchers have developed antimicrobial nanoparticles, conjugated ceramic minerals with antibacterial and mineralising properties, to prevent the formation and progression of caries. Common ceramic nanomaterials developed for caries prevention include calcium-based (including hydroxyapatite-based), bioactive glass-based, and silica-based nanoparticles. Calcium-based ceramic nanomaterials can substitute for the lost hydroxyapatite by depositing calcium ions. Bioactive glass-based nanoparticles contain surface-reactive glass that can form apatite crystals resembling bone and tooth tissue and exhibit chemical bonding to the bone and tooth tissue. Silica-based nanoparticles contain silica for collagen infiltration and enhancing heterogeneous mineralisation of the dentin collagen matrix. In summary, ceramic nanomaterials can be used for caries prevention because of their antibacterial and mineralising properties. This study gives an overview of ceramic nanomaterials for the prevention of dental caries.

The effect of minimally invasive treatments on enamel microhardness and resistance to further demineralization

Objectives: The present study aimed to compare microhardness of inactive proximal lesions treated by resin infiltration, Er:YAG laser + resin infiltration and Bioactive glass, and investigate the resistance of treated lesions to further demineralization challenge. Methods: In this in-vitro study, 30 human molars with inactive proximal lesions were selected and randomly divided into three groups of 10. In group 1 (resin infiltration), the lesions were treated by a resin infiltrant (Icon). In group 2, the surface was conditioned by an Er:YAG laser prior to resin infiltration. The specimens in group 3 were remineralized by bioactive glass. The treated specimens were kept in artificial saliva for 1 week and then immersed in a demineralization solution for 8 weeks. Surface microhardness was measured at baseline (T0), after remineralization (T1) and after exposure to the demineralization solution (T2), and the difference in microhardness between time points (ΔVHN) was calculated. Results: Microhardness after demineralization (T2) was significantly lower than those of other intervals (P0.05). The statistical analysis revealed no significant difference either in ΔVHNT1-T0 or in ΔVHNT2-T1 among the study groups (P>0.05) Conclusion: Pretreatment by the Er:YAG laser prior to resin infiltration was more effective that other treatments in enhancing microhardness and protecting the tooth against acidic challenge. However, the difference between groups did not reach a statistical significance, implying the need for further studies to achieve more conclusive results.

Application of bioactive glasses in various dental fields

Bioactive glasses are a group of bioceramic materials that have extensive clinical applications. Their properties such as high biocompatibility, antimicrobial features, and bioactivity in the internal environment of the body have made them useful biomaterials in various fields of medicine and dentistry. There is a great variation in the main composition of these glasses and some of them whose medical usage has been approved by the US Food and Drug Administration (FDA) are called Bioglass. Bioactive glasses have appropriate biocompatibility with the body and they are similar to bone hydroxyapatite in terms of calcium and phosphate contents. Bioactive glasses are applied in different branches of dentistry like periodontics, orthodontics, endodontics, oral and maxillofacial surgery, esthetic and restorative dentistry. Also, some dental and oral care products have bioactive glasses in their compositions. Bioactive glasses have been used as dental implants in the human body in order to repair and replace damaged bones. Other applications of bioactive glasses in dentistry include their usage in periodontal disease, root canal treatments, maxillofacial surgeries, dental restorations, air abrasions, dental adhesives, enamel remineralization, and dentin hypersensitivity. Since the use of bioactive glasses in dentistry is widespread, there is a need to find methods and extensive resources to supply the required bioactive glasses. Various techniques have been identified for the production of bioactive glasses, and marine sponges have recently been considered as a rich source of it. Marine sponges are widely available and many species have been identified around the world, including the Persian Gulf. Marine sponges, as the simplest group of animals, produce different bioactive compounds that are used in a wide range of medical sciences. Numerous studies have shown the anti-tumor, anti-viral, anti-inflammatory, and antibiotic effects of these compounds. Furthermore, some species of marine sponges due to the mineral contents of their structural skeletons, which are made of biosilica, have been used for extracting bioactive glasses.

Enamel Remineralization Competence of a Novel Fluoride-Incorporated Bioactive Glass Toothpaste-A Surface Micro-Hardness, Profilometric, and Micro-Computed Tomographic Analysis

This study aimed to analyze the enamel remineralization efficacy of a novel fluoridated bioactive glass (F-BG) toothpaste compared to a standard fluoride toothpaste. Seventy-two enamel blocks (N = 72) were divided into groups of twenty-four blocks according to the toothpaste exposure—group 1: brushed with distilled water, group 2: brushed with fluoride toothpaste (Colgate^TM), and group 3: brushed with F-BG toothpaste (BioMinF^TM). Pre-brushing, enamel blocks were demineralized using 6 wt.% citric acid (pH = 2.4). Tooth brushing was performed using a mixture of respective toothpaste and artificial saliva (AS), and each enamel block received 5000 linear strokes. The samples were assessed for surface micro-hardness (to estimate Vickers hardness number, VHN), surface roughness (Ra), and volume loss/gain using micro-computed tomography (micro-CT). The highest increase in the VHN was noticed for group 3 (117.81) followed by group 2 (61.13), and all the intragroup comparisons were statistically significant (p < 0.05). Demineralization increased the Ra values, and a decrease was observed post-remineralization for all the groups. The maximum Ra decrease was observed for group 3 (−223.2 nm) followed by group 2 (−55.6 nm), and all the intragroup comparisons were again statistically significant (p < 0.05). Micro-CT investigation revealed that the enamel volume decreased after demineralization and increased after remineralization among all groups. The F-BG toothpaste showed greater enamel surface micro-hardness (increased VHN), smoother surface (low roughness), and better volume restoration (remineralization) in comparison to the fluoride toothpaste.

Bioactive Glass Applications: A Literature Review of Human Clinical Trials

The use of bioactive glasses in dentistry, reconstructive surgery, and in the treatment of infections can be considered broadly beneficial based on the emerging literature about the potential bioactivity and biocompatibility of these materials, particularly with reference to Bioglass® 45S5, BonAlive® and 19-93B3 bioactive glasses. Several investigations have been performed (i) to obtain bioactive glasses in different forms, such as bulk materials, powders, composites, and porous scaffolds and (ii) to investigate their possible applications in the biomedical field. Although in vivo studies in animals provide us with an initial insight into the biological performance of these systems and represent an unavoidable phase to be performed before clinical trials, only clinical studies can demonstrate the behavior of these materials in the complex physiological human environment. This paper aims to carefully review the main published investigations dealing with clinical trials in order to better understand the performance of bioactive glasses, evaluate challenges, and provide an essential source of information for the tailoring of their design in future applications. Finally, the paper highlights the need for further research and for specific studies intended to assess the effect of some specific dissolution products from bioactive glasses, focusing on their osteogenic and angiogenic potential.

Clinical and Radiographic Analysis of Novabone Putty with Platelet-Rich Fibrin in the Treatment of Periodontal Intrabony Defects: A Randomized Control Trial

Background:

Periodontal regeneration remains one of the crucial issues in the field of periodontology. Periodontal intrabony defects could be treated by surgical intervention through various alloplastic bone graft substitutes. The Food and Drug Administration approved, Novabone putty is one of the recently marketed bone graft substitutes, which has been used in the present study. This study also incorporates the placement of platelet-rich fibrin (PRF) in combination with Novabone putty.

Materials and Methods:

Twenty patients were included in the study and were allocated to either Group A or Group B through randomization. Group A included the placement of Novabone putty in the periodontal intrabony defects, whereas Group B included the placement of Novabone putty along with PRF. Statistical analysis of plaque index, gingival index, probing pocket depth, relative attachment level, and intraoral periapical radiographs was performed.

Results:

Statistical more significant difference (P < 0.05) in probing pocket depth, and relative attachment level was observed in Group B (Novabone putty and PRF) in comparison to Group A (Novabone putty).

Conclusion:

Evaluation of efficacy of Novabone putty along with PRF produced more favorable results in relative attachment level gain and more reduction in probing pocket depth when compared to Novabone putty alone.

Remineralizing effect of a new strontium-doped bioactive glass and fluoride on demineralized enamel and dentine

OBJECTIVE

To investigate the remineralizing effect of a strontium-doped bioactive glass (HX-BGC) and fluoride on demineralized enamel and dentine.

MATERIALS

Sixty demineralized human tooth specimens were allocated to four groups. Group 1 received 5% HX-BGC, Group 2 received 5% HX-BGC and 1450 ppm fluoride, Group 3 received 1450 ppm fluoride, and Group 4 received deionized water as negative control. The specimens were subjected to pH cycling for 14 days. The surface morphology, lesion depths, crystal characteristics and collagen matrix degradation of the specimens were assessed by scanning electron microscopy (SEM), micro-computed tomography (mico-CT), X-ray diffraction (XRD), and spectrophotometry with a hydroxyproline (HYP) assay, respectively.

RESULTS

SEM images showed the enamel surface was smooth with regularly arranged enamel rods in Groups 1-3. Granular grains were observed in both inter-tubular and intra-tubular dentine in Groups 1-3. The mean lesion depths in enamel were 80.8 μm, 50.6 μm, 72.7 μm and 130.7 μm in Groups 1-4, respectively (p < 0.001), and those in dentine were 152.6 μm, 140.9 μm, 165.4 μm and 214.1 μm, respectively (p < 0.001). The differences in mean mineral loss in enamel and in dentine between the four study groups follow the same pattern as that of the differences in lesion depth. XRD illustrated apatite formation in each group. There were no significant differences in the HYP concentrations among the four groups (p = 0.261).

CONCLUSION

Combined use of HX-BGC and fluoride can reduce mineral loss and promote remineralization of demineralized enamel and dentine through the precipitation of newly formed apatite.

CLINICAL SIGNIFICANCE

Adjunctive use of HX-BGC may enhance the remineralization effect of fluoride in the management of early dental caries lesions.

Silica-Based Bioactive Glasses and Their Applications in Hard Tissue Regeneration: A Review

Regenerative medicine is a field that aims to influence and improvise the processes of tissue repair and restoration and to assist the body to heal and recover. In the field of hard tissue regeneration, bio-inert materials are being predominantly used, and there is a necessity to use bioactive materials that can help in better tissue-implant interactions and facilitate the healing and regeneration process. One such bioactive material that is being focused upon and studied extensively in the past few decades is bioactive glass (BG). The original bioactive glass (45S5) is composed of silicon dioxide, sodium dioxide, calcium oxide, and phosphorus pentoxide and is mainly referred to by its commercial name Bioglass. BG is mainly used for bone tissue regeneration due to its osteoconductivity and osteostimulation properties. The bioactivity of BG, however, is highly dependent on the compositional ratio of certain glass-forming system content. The manipulation of content ratio and the element compositional flexibility of BG-forming network developed other types of bioactive glasses with controllable chemical durability and chemical affinity with bone and bioactivity. This review article mainly discusses the basic information about silica-based bioactive glasses, including their composition, processing, and properties, as well as their medical applications such as in bone regeneration, as bone grafts, and as dental implant coatings.

A Review of Bioactive Glass/Natural Polymer Composites: State of the Art

Collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose are biocompatible and non-cytotoxic, being attractive natural polymers for medical devices for both soft and hard tissues. However, such natural polymers have low bioactivity and poor mechanical properties, which limit their applications. To tackle these drawbacks, collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose can be combined with bioactive glass (BG) nanoparticles and microparticles to produce composites. The incorporation of BGs improves the mechanical properties of the final system as well as its bioactivity and regenerative potential. Indeed, several studies have demonstrated that polymer/BG composites may improve angiogenesis, neo-vascularization, cells adhesion, and proliferation. This review presents the state of the art and future perspectives of collagen, gelatin, silk fibroin, hyaluronic acid, chitosan, alginate, and cellulose matrices combined with BG particles to develop composites such as scaffolds, injectable fillers, membranes, hydrogels, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a wide spectrum of applications.

An in-vitro evaluation of fluoride content and enamel remineralization potential of two toothpastes containing different bioactive glasses

BACKGROUND

Many novel biomaterials have been incorporated in toothpastes to promote remineralization of tooth structure.

OBJECTIVES

This study was carried out to compare the discrepancies between declared and actual total fluoride (TF) or total soluble fluoride (TSF) concentration of two modern toothpastes containing bioactive glasses; these were also assessed for their remineralization potential.

MATERIALS AND METHODS

The TF and TSF concentration were assessed using a fluoride ion selective electrode. Enamel remineralization was evaluated through micro-hardness analysis. Eighteen enamel blocks were divided into three groups: 1 (n = 6; control), 2 (n = 6; Novamin® toothpaste), and 3 (n = 6; BiominF® toothpaste). The specimens were demineralized by 6 wt% citric acid (pH = 2.2). Subsequently, the specimens in group 1 were kept in artificial saliva (AS), while the specimens in groups 2 and 3 were stored in AS + Novamin® and AS + Biomin®, respectively.

RESULTS

Both Novamin® or BiominF® showed less TF concentration than their label claims. BiominF® had more TF and TSF compared to Novamin® (p < 0.05). The BiominF® toothpaste presented higher micro-hardness values on remineralization.

CONCLUSION

BiominF® toothpaste demonstrated more fluoride content and greater potential to promote remineralization of demineralized human enamel compared to Novamin®.

Preparation of a toothpaste containing theobromine and fluoridated bioactive glass and its effect on surface micro-hardness and roughness of enamel

The aim was to synthesize a toothpaste and analyze its effect on surface micro-hardness and roughness of enamel. Basic paste was prepared by using basic ingredients. Theobromine (0.2 wt%) and laboratory synthesized fluoridated-bioactive glass (F-BG, 4 wt%) were added to it. Post-demineralization, 36 enamel blocks were divided into six groups that were brushed with their respective toothpaste+artificial saliva (AS): group 1 (control): basic paste; group 2: basic paste+theobromine; group 3: commercial theobromine toothpaste; group 4: commercial BG toothpaste; group 5: basic paste+F-BG; and group 6: basic paste+theobromine+F-BG. On micro-hardness analysis, group 6 performed best, followed by group 4. Surface roughness results showed the maximum decrease in roughness values for group 6, followed by group 5. Treatment with toothpaste composition containing theobromine+F-BG resulted in the enamel's increased micro-hardness and decreased surface roughness.

Nanoparticles as Anti-Microbial, Anti-Inflammatory, and Remineralizing Agents in Oral Care Cosmetics: A Review of the Current Situation

Many investigations have pointed out widespread use of medical nanosystems in various domains of dentistry such as prevention, prognosis, care, tissue regeneration, and restoration. The progress of oral medicine nanosystems for individual prophylaxis is significant for ensuring bacterial symbiosis and high-quality oral health. Nanomaterials in oral cosmetics are used in toothpaste and other mouthwash to improve oral healthcare performance. These processes cover nanoparticles and nanoparticle-based materials, especially domains of application related to biofilm management in cariology and periodontology. Likewise, nanoparticles have been integrated in diverse cosmetic produces for the care of enamel remineralization and dental hypersensitivity. This review summarizes the indications and applications of several widely employed nanoparticles in oral cosmetics, and describes the potential clinical implementation of nanoparticles as anti-microbial, anti-inflammatory, and remineralizing agents in the prevention of dental caries, hypersensitivity, and periodontitis.

Dentin Tubule Occlusion Potential of Novel Dentifrices Having Fluoride Containing Bioactive Glass and Zinc Oxide Nanoparticles

OBJECTIVE

To compare the in vitro potential of dentin tubule occlusion of two novel experimental dentifrices consisting of fluoride containing bioactive glass (BG) with zinc oxide nanoparticles.

MATERIALS AND METHODS

Forty-eight dentin discs (n = 48) were divided into 6 groups (n = 8), based on their brushing dentifrices: Group 1 = artificial saliva (AS; control); Group 2 = fluoride dentifrice (Colgate Palmolive©, UK); Group 3 = experimental nonactive agent dentifrice; Group 4 = experimental dentifrice with 1.5% BG; Group 5 = experimental dentifrice with 4% BG; and Group 6 = BioMinF© dentifrice. Postbrushing, the discs were subjected to acidic challenge with 6% wt citric acid (pH = 4.0) for 1 min. Scanning electron microscope (SEM) and energy-dispersive X-ray (EDX) spectroscopy were performed pre- and post-citric acid challenges, and percentages of tubule occlusion assessed.

RESULTS

SEM micrographs of group 1 (AS) show no tubule occlusion (0%), whereas those of groups 2 and 3 show partial tubule occlusion (25 to <50% of tubules occluded). The SEM micrographs of dentifrices containing fluoride-BG (groups 4, 5, and 6) show that most of the tubules (>50 and <100%) were occluded. For all the groups (excluding group 1), pre- and post-citric acid challenge values are statistically significant (p < 0.05). EDX analysis reveals the presence of zinc in experimental dentifrices only.

CONCLUSION

The results of novel experimental dentifrices are comparable to those of the BioMinF©, in terms of tubule occlusion. Dentifrices containing BG could serve as an alternative in dentin sensitivity management.

Mechanisms of Bioactive Glass on Caries Management: A Review

This review investigates the mechanisms of bioactive glass on the management of dental caries. Four databases (PubMed, Web of Science, EMBASE (via Ovid), Medline (via Ovid)) were systematically searched using broad keywords and terms to identify the literature pertaining to the management of dental caries using "bioactive glass". Titles and abstracts were scrutinized to determine the need for full-text screening. Data were extracted from the included articles regarding the mechanisms of bioactive glass on dental caries management, including the aspect of remineralizing effect on enamel and dentine caries, and antimicrobial effect on cariogenic bacteria. After removal of duplicates, 1992 articles were identified for screening of the titles and abstracts. The full texts of 49 publications were scrutinized and 23 were finally included in this review. Four articles focused on the antimicrobial effect of bioactive glass. Twelve papers discussed the effect of bioactive glass on demineralized enamel, while 9 articles investigated the effect of bioactive glass on demineralized dentine. In conclusion, bioactive glass can remineralize caries and form apatite on the surface of enamel and dentine. In addition, bioactive glass has an antibacterial effect on cariogenic bacteria of which may help to prevent and arrest dental caries.

Bioactive Glass Applications in Dentistry

At present, researchers in the field of biomaterials are focusing on the oral hard and soft tissue engineering with bioactive ingredients by activating body immune cells or different proteins of the body. By doing this natural ground substance, tissue component and long-lasting tissues grow. One of the current biomaterials is known as bioactive glass (BAG). The bioactive properties make BAG applicable to several clinical applications involving the regeneration of hard tissues in medicine and dentistry. In dentistry, its uses include dental restorative materials, mineralizing agents, as a coating material for dental implants, pulp capping, root canal treatment, and air-abrasion, and in medicine it has its applications from orthopedics to soft-tissue restoration. This review aims to provide an overview of promising and current uses of bioactive glasses in dentistry.

Bioactive Glasses and Glass-Ceramics for Healthcare Applications in Bone Regeneration and Tissue Engineering

The discovery of bioactive glasses (BGs) in the late 1960s by Larry Hench et al. was driven by the need for implant materials with an ability to bond to living tissues, which were intended to replace inert metal and plastic implants that were not well tolerated by the body. Among a number of tested compositions, the one that later became designated by the well-known trademark of 45S5 Bioglass® excelled in its ability to bond to bone and soft tissues. Bonding to living tissues was mediated through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. This feature represented a remarkable milestone, and has inspired many other investigations aiming at further exploring the in vitro and in vivo performances of this and other related BG compositions. This paradigmatic example of a target-oriented research is certainly one of the most valuable contributions that one can learn from Larry Hench. Such a goal-oriented approach needs to be continuously stimulated, aiming at finding out better performing materials to overcome the limitations of the existing ones, including the 45S5 Bioglass®. Its well-known that its main limitations include: (i) the high pH environment that is created by its high sodium content could turn it cytotoxic; (ii) and the poor sintering ability makes the fabrication of porous three-dimensional (3D) scaffolds difficult. All of these relevant features strongly depend on a number of interrelated factors that need to be well compromised. The selected chemical composition strongly determines the glass structure, the biocompatibility, the degradation rate, and the ease of processing (scaffolds fabrication and sintering). This manuscript presents a first general appraisal of the scientific output in the interrelated areas of bioactive glasses and glass-ceramics, scaffolds, implant coatings, and tissue engineering. Then, it gives an overview of the critical issues that need to be considered when developing bioactive glasses for healthcare applications. The aim is to provide knowledge-based tools towards guiding young researchers in the design of new bioactive glass compositions, taking into account the desired functional properties.