The effect of humic acid binding to magnetite nanoparticles on the photogeneration of reactive oxygen species

Bifunctional magnetic nanoparticles with ion imprinting for improving the flow through determination of ultratraces of Cd(II) using magnetic preconcentration

A novel bifunctional magnetic sorbent with mercapto and amino groups and ion imprinting (MBII) was synthesized using a one-step aqueous sol-gel process for preconcentration and determination of Cd(II) ions. MBII was employed as a microcolumn (MC) filler in a flow-through system coupled to GFAAS. The magnetic properties of the solid allowed microcolumn magnetic solid-phase extraction (MCMSPE) to be performed by simply including a single circular magnet around the MC. This assembly enabled complete attachment of the solid to the MC wall leaving a central void to facilitate higher sample flow rates without blockage or material loss. For comparison, a bifunctional magnetic solid without imprinting (MBNI) was also synthesized and evaluated. Both MBII and MBNI were characterized by FTIR, SEM, EDX, BET and magnetization measurements. The results showed the preservation of the magnetic core, its superparamagnetism and the functional groups in the solid. Batch studies revealed a maximum adsorption capacity for both materials at pH around 6 with equilibrium reached within 5 minutes. The advantages were reflected in the maximum adsorption capacity of MBII, which was found to be 2.5 times greater than that of MBNI. Both adsorbents were compared as MC fillers for dynamic preconcentration in MCMSPE systems. Under optimized conditions, MBNI showed a PCF of 125 and MBII of 250. The higher selectivity of MBII was corroborated by interfering ion studies. The analytical performance parameters for the proposed method using MBII as an adsorbent showed a detection limit of 0.05 ng L-1, a linear range of 2.0-80 ng L-1, an RSD% of 2.2 (n = 7; 20 ng L-1) and a lifetime of more than 300 preconcentration-elution cycles without loss of sensitivity or need for refilling. The method was successfully applied to the determination of trace Cd(II) in osmosis, lake and tap water with recoveries ranging from 98 to 105%. Comparison of these results with those of similar reported methods showed a considerable improvement primarily attributed to the combined effect of MBII's higher retention capacity and its magnetic properties that allowed higher sample flow rates and, thus, enhanced figures of merit.

Particles-involved photochemical processes: A review for the case of mercury reduction in relation to aquatic mercury cycling

Mercury (Hg) is one of the toxic metals of global and environmental concern, with aquatic Hg cycling being central in determining the production of highly toxic methylmercury and the air-water Hg exchange influencing the long-range intercontinental atmospheric Hg transport. Both inorganic and organic forms of Hg can be bound by suspended particles, including inorganic minerals (in particular metal oxides/sulfides) and particulate organic matter. Photochemical transformation is a critical process in surface water, and the role of suspended particles in Hg redox photoreactions has increasingly emerged, albeit in limited studies in comparison to extensive studies on aqueous (homogeneous) photoreactions of Hg. The lack of understanding of what roles suspended particles play might result in inaccurate estimation of how Hg species transform and/or cycle in the environment. In view of this gap, this paper critically reviews and synthesizes information on the studies conducted on different natural surface waters with respect to the potential roles of suspended particles on Hg photo-redox reactions. It robustly discusses the various possible pathways and/or mechanisms of particle-mediated Hg (II) reduction, in enhancing or lowering the production of dissolved gaseous mercury. These processes include photo hole-electron pair formation and reactive oxygen species generation from particle excitation and their involvement in Hg photoreduction, in addition to the light attenuation effect of particles. This paper highlights the necessity of future studies exploiting these particles-mediated Hg photoreactions pathways and the implications of including these heterogeneous photoreactions (together with particulate elemental Hg species) on the air-water Hg exchange estimation.

Progress of photocatalytic oxidation-adsorption synergistic removal of organic arsenic in water

Photocatalytic oxidation-adsorption synergistic treatment of organic arsenic pollutants is a promising wastewater treatment technology, which not only degrades organic arsenic pollutants by photocatalytic degradation but also removes the generated inorganic arsenic by adsorption. This paper compares the results of photocatalytic oxidation-adsorption co-treatment of organic arsenic pollutants such as monomethylarsonic acid, dimethylarsinic acid, phenylarsonic acid, p-arsanilic acid, and 3-nitro-4-hydroxyphenylarsonic acid on titanium dioxide, goethite, zinc oxide, and copper oxide. It examines the influence of the morphology of organic arsenic molecules, pH, coexisting ions, and the role of natural organic matter. The photocatalytic oxidation-adsorption co-treatment mechanism is investigated, comparing the hydroxyl radical oxidation mechanism, the hydroxyl radical and superoxide anion radical cooxidation mechanism, and the hydroxyl radical and hole cooxidation mechanism. Finally, the future prospects of metal oxide photocatalytic materials and the development of robust and efficient technologies for removing organic arsenic are envisioned.

Advancing sustainable water treatment strategies: harnessing magnetite-based photocatalysts and techno-economic analysis for enhanced wastewater management in the context of SDGs

Herein, we explore the holistic integration of magnetite-based photocatalysts and techno-economic analysis (TEA) as a sustainable approach in wastewater treatment aligned with the Sustainable Development Goals (SDGs). While considerable attention has been devoted to photocatalytic dye degradation, the nexus between these processes and techno-economic considerations remains relatively unexplored. The review comprehensively examines the fundamental characteristics of magnetite-based photocatalysts, encompassing synthesis methods, composition, and unique properties. It investigates their efficacy in photocatalytic degradation, addressing homogeneous and heterogeneous aspects while discussing strategies to optimize photodegradation efficiency, including curbing electron-hole recombination and mitigating scavenging effects and interference by ions and humic acid. Moreover, the management aspects of magnetite-based photocatalysts are examined, focusing on their reusability and regeneration post-dye removal, along with the potential for reusing treated wastewater in relevant industrial applications. From a techno-economic perspective, the study evaluates the financial feasibility of deploying magnetite-based photocatalysts in wastewater treatment, correlating reduced pollution and the marketing of treated water with social, economic, and environmental objectives. By advocating the integration of magnetite-based photocatalysts and TEA, this paper contributes insights into scalable and profitable sustainable wastewater treatment practices. It underscores the alignment of these practices with SDGs, emphasizing a comprehensive and holistic approach to managing wastewater in ways that meet environmental, economic, and societal objectives.

Functionalized Magnetite Nanoparticles: Characterization, Bioeffects, and Role of Reactive Oxygen Species in Unicellular and Enzymatic Systems

The current study evaluates the role of reactive oxygen species (ROS) in bioeffects of magnetite nanoparticles (MNPs), such as bare (Fe3O4), humic acids (Fe3O4-HA), and 3-aminopropyltriethoxysilane (Fe3O4-APTES) modified MNPs. Mössbauer spectroscopy was used to identify the local surrounding for Fe atom/ions and the depth of modification for MNPs. It was found that the Fe3O4-HA MNPs contain the smallest, whereas the Fe3O4-APTES MNPs contain the largest amount of Fe2+ ions. Bioluminescent cellular and enzymatic assays were applied to monitor the toxicity and anti-(pro-)oxidant activity of MNPs. The contents of ROS were determined by a chemiluminescence luminol assay evaluating the correlations with toxicity/anti-(pro-)oxidant coefficients. Toxic effects of modified MNPs were found at higher concentrations (>10−2 g/L); they were related to ROS storage in bacterial suspensions. MNPs stimulated ROS production by the bacteria in a wide concentration range (10−15−1 g/L). Under the conditions of model oxidative stress and higher concentrations of MNPs (>10−4 g/L), the bacterial bioassay revealed prooxidant activity of all three MNP types, with corresponding decay of ROS content. Bioluminescence enzymatic assay did not show any sensitivity to MNPs, with negligible change in ROS content. The results clearly indicate that cell-membrane processes are responsible for the bioeffects and bacterial ROS generation, confirming the ferroptosis phenomenon based on iron-initiated cell-membrane lipid peroxidation.

Opposite impact of DOM on ROS generation and photoaging of aromatic and aliphatic nano- and micro-plastic particles

Dissolved organic matter (DOM) plays a significant role in the photochemical behavior of nano- and micro-plastic particles (NPs/MPs). We investigated the influence of DOM on the mechanism on the photoaging of NPs/MPs with different molecular structures under UV₃₆₅ irradiation in water. DOM components used in this study are mainly humic acid and fulvic acid. The results showed that DOM promoted the weathering of aliphatic NPs/MPs (polypropylene (PP)), but inhibited or had only a minor effect on the photoaging of aromatic NPs/MPs (polystyrene (PS) NPs/MPs, carboxyl-modified PS NPs, amino-modified PS NPs, and polycarbonate MPs). NPs with a large surface area may adsorb sufficient DOM on the particle surfaces through π-π interactions, which competes with NPs for photon absorption sites, thus, can delay the photoaging of PS NPs. Aromatic MPs may release phenolic compounds that quench •OH, thereby weakening the photoaging process. For aliphatic MPs, the detection of peracid, aldehyde, and ketone groups on the polymer surface indicated that DOM promoted weathering of PP MPs, which was primarily because the generation of •OH due to DOM photolysis may attack the polymer by C-C bond cleavage and hydrogen extraction reactions. This study provides insight into the UV irradiation weathering process of NPs/MPs of various compositions and structures, which are globally distributed in water.

An ion imprinted magnetic organosilica nanocomposite for the selective determination of traces of Cd(II) in a minicolumn flow-through preconcentration system coupled with graphite furnace atomic absorption spectroscopy

In this paper we present the determination of ultratraces of cadmium ions in water by means of a minicolumn (MC) flow-through preconcentration system coupled with graphite furnace atomic absorption spectrometry. The core of the system is a lab-made ion imprinted magnetic organosilica nanocomposite which is employed as filler of the MC for the selective retention of the analyte. In this case superparamagnetic magnetite nanoparticles were coated with an amine-functionalized shell and ion imprinted with Cd(II) by a simple sol-gel co-condensation method. The setup was completed with the inclusion of a magnet fixed around the packed MC. This assembly - which is studied with an MII material for the first time here - allowed a homogeneous distribution of the solid on the walls of the MC, leaving a hole in the center and enabling the absence of material bleeding or obstructions to the free movement of fluids. Ion imprinted (MII) and non-imprinted (MNI) materials were studied for comparison purposes. Both were characterized and compared by DRX, FTIR, and SEM and their magnetic behavior by magnetization curves. Batch experiments showed an equilibration time of less than 10 minutes and a maximum adsorption pH of around 7 for both solids. The maximum capacity for MII was greater than that of MNI (200 mg g^-1 and 30 mg g^-1 respectively) and thus, the former was chosen for analytical purposes. Under MC dynamic conditions, sample and elution flow rates, volumes of the sample and eluant, and type and concentration of the most suitable eluant have been thoroughly investigated and optimized. Under the optimal experimental conditions, the MII filler showed a preconcentration factor of 200, a limit of detection of 0.64 ng L^-1, a linear range of 2.5-100 ng L^-1, RSD% of 1.9 (n = 6; 10 ng L^-1) and a lifetime of more than 800 cycles of concentration-elution with no loss of sensitivity or need for refilling. The effect of potentially interfering ions on the percent recovery of cadmium was also studied. The proposed method was successfully applied to the determination of traces of Cd(II) in osmosis and tap water with recoveries of 98.0-101.3%. A comparison with similar methods is also provided.

Sorption of uranium(VI) from aqueous solution using nanomagnetite particles; with and without humic acid coating

In this study, iron oxide nanoparticles (Fe3O4) and iron oxide nanoparticles with humic acid coatings (Fe3O4/HA) were investigated for the removal of U(VI). The effect of contact time, adsorbent mass, U(VI) concentration, and pH was studied by batch technique. The sorption kinetic data follows pseudo-second order, while the isotherms obey Langmuir with Qmax values of 238.0, 195.6 mg/g for Fe3O4 and Fe3O4/HA, respectively. According to the study, humic acid decreases the sorption capacity of magnetite due to the formation of a polyanionic organic coating, altering the surface properties of the particles, reducing magnetite aggregation, and stabilizing magnetite suspension.

Singlet Oxygen Quantum Yields in Environmental Waters

Singlet oxygen (¹O₂) is a reactive oxygen species produced in sunlit waters via energy transfer from the triplet states of natural sensitizers. There has been an increasing interest in measuring apparent ¹O₂ quantum yields (Φ_Δ) of aquatic and atmospheric organic matter samples, driven in part by the fact that this parameter can be used for environmental fate modeling of organic contaminants and to advance our understanding of dissolved organic matter photophysics. However, the lack of reproducibility across research groups and publications remains a challenge that significantly limits the usability of literature data. In the first part of this review, we critically evaluate the experimental techniques that have been used to determine Φ_Δ values of natural organic matter, we identify and quantify sources of errors that potentially explain the large variability in the literature, and we provide general experimental recommendations for future studies. In the second part, we provide a qualitative overview of known Φ_Δ trends as a function of organic matter type, isolation and extraction procedures, bulk water chemistry parameters, molecular and spectroscopic organic matter features, chemical treatments, wavelength, season, and location. This review is supplemented with a comprehensive database of Φ_Δ values of environmental samples.

Influence of NOM on the Stability of Zinc Oxide Nanoparticles in Ecotoxicity Tests

Nanomaterials are known to aggregate in the presence of ions. Similarly, the aggregation of zinc oxide nanoparticles (ZnO NPs) exposed to various ions such as sodium chloride and calcium chloride in water systems increases with the ionic strength. Therefore, for accurate toxicity studies, it is necessary to conduct a test using natural organic matters (NOMs) as additional dispersants that strengthen stability with increased repulsive forces. The three types of ecotoxicity tests based on the dispersion stability test using NOM showed that the toxicities of the three test samples decreased in the presence of NOM. To determine how NOM improved dispersion and reduced toxicities, we analyzed the ionization degree of ZnO NPs with and without NOM and found that the solubility was below 2 mg/L with a negligible change over time, implying that the ionization effect was low. The absolute value of the surface charge of particles increased in the presence of NOM, resulting in increased repulsive electrostatic forces and steric hindrance, causing less aggregation and more dispersion. Additionally, although the NOM used in the test is considered an effective dispersant that does not have a toxicological effect on aquatic organisms, the presence of NOM resulted in reduced toxicities and should be further investigated to establish it as a standard test method.

Removal of As(III) from Water Using the Adsorptive and Photocatalytic Properties of Humic Acid-Coated Magnetite Nanoparticles

The oxidation of highly toxic arsenite (As(III)) was studied using humic acid-coated magnetite nanoparticles (HA-MNP) as a photosensitizer. Detailed characterization of the HA-MNP was carried out before and after the photoinduced treatment of As(III) species. Upon irradiation of HA-MNP with 350 nm light, a portion of the As(III) species was oxidized to arsenate (As(V)) and was nearly quantitatively removed from the aqueous solution. The separation of As(III) from the aqueous solution is primarily driven by the strong adsorption of As(III) onto the HA-MNP. As(III) removals of 40–90% were achieved within 60 min depending on the amount of HA-MNP. The generation of reactive oxygen species (•OH and ¹O₂) and the triplet excited state of HA-MNP (³HA-MNP*) was monitored and quantified during HA-MNP photolysis. The results indicate ³HA-MNP* and/or singlet oxygen (¹O₂) depending on the reaction conditions are responsible for converting As(III) to less toxic As(V). The formation of ³HA-MNP* was quantified using the electron transfer probe 2,4,6-trimethylphenol (TMP). The formation rate of ³HA-MNP* was 8.0 ± 0.6 × 10⁻⁹ M s⁻¹ at the TMP concentration of 50 µM and HA-MNP concentration of 1.0 g L⁻¹. The easy preparation, capacity for triplet excited state and singlet oxygen production, and magnetic separation suggest HA-MNP has potential to be a photosensitizer for the remediation of arsenic (As) and other pollutants susceptible to advanced oxidation.

Transformation of catechol coupled to redox alteration of humic acids and the effects of Cu and Fe cations

Humic substances are reactive during redox alteration. However, the role of this reactivity in the transformation of organic compounds and in carbon cycling in the environment is still unclear. Here, we used ¹⁴C-radioactive tracer to study abiotic transformation and humification of catechol, a representative of naturally occurring monomeric phenols and phenolic pollutants, in suspensions of humic acids (HAs) at original and H₂/Pd-reduced redox states with flux of air (HA_org-Air and HA_red-Air, respectively) or N₂ (HA_org-N₂ and HA_red-N₂, respectively) for 20 min in absence and presence of Cu(II) and Fe(II). Both HA_org and HA_red can transform catechol in the absence of O₂ to 19% and 25% of the initially applied amount, respectively. The transformation of catechol strongly increased when air was introduced, amounting to 75% in HA_red-Air treatment and 43% in HA_org-Air treatment, owing to the generation of reactive oxygen species. Considerable amounts of catecholic carbons were incorporated into HAs (26% for HA_red-Air and 19% for HA_org-Air), constituting humification of catechol. The presence of Cu(II) strongly inhibited the overall transformation and humification of catechol, although it significantly increased humification at the start of incubation. The presence of Fe(II) overall enhanced both the transformation and humification. The results provide first insights into the impacts of redox alteration of humic substances together with the presence of metal ions with variable valences on the fate of phenolic compounds in the environment. This study points out that redox alteration-induced abiotic transformation may be one important process for dissipation of phenolic pollutants and humification of phenolic carbons in environments rich in HAs and subject to redox fluctuation.

Carbamazepine Degradation Mediated by Light in the Presence of Humic Substances-Coated Magnetite Nanoparticles

The use of iron-based nanomaterials for environmental remediation processes has recently received considerable attention. Here, we employed core-shell magnetite-humic acids nanoparticles as a heterogeneous photosensitizer and iron source in photo-Fenton reaction for the degradation of the psychiatric drug carbamazepine (CBZ). CBZ showed low photodegradation rates in the presence of the magnetic nanoparticles, whereas the addition of hydrogen peroxide at pH = 3 to the system drastically increased the abatement of the contaminant. The measured Fe²⁺ and Fe³⁺ profiles point to the generation of Fe³⁺ at the surface of the nanoparticles, indicating a heterogeneous oxidation of the contaminant mediated by hydroxyl radicals. Products with a higher transformation degree were observed in the photo-Fenton procedure and support the attack of the HO^• radical on the CBZ molecule. Promising results encourage the use of the nanoparticles as efficient iron sources with enhanced magnet-sensitive properties, suitable for applications in photo-Fenton treatments for the purification of wastewater.

Enhanced decolorization of methyl orange by Bacillus sp. strain with magnetic humic acid nanoparticles under high salt conditions

In this study, magnetic humic acid (MHA) nanoparticle was prepared and confirmed the enhancement on reduction of azo dyes under high salt concentration. The anaerobic growth of the strain Bacillus sp. on quinones makes the biogenic hydroquinone feasible, and the latter was proven to reduce the azo dyes stoichiometrically. This in-situ reversibly oxidation and reduction of MHA acts as electron shuttle to catalyze the biotic reduction of the azo dyes. The biodegradation efficiencies in batch experiments and sequencing batch reactor with MHA were increased by 1.5-2.5 times as compared to that of control without the catalyzer. Moreover, the negligible leaching of HA under various environmental conditions suggests the robustness of the coating of HA on Fe/O surface. These results indicated that the as-prepared MHA could be used as redox mediator to accelerate the extracellular electron transfer, which is of great environmental significance for the removal of hazardous compounds.

New insights into the impact of nZVI on soil microbial biodiversity and functionality

Nanoscale zero-valent iron (nZVI) is a strong reducing agent used for in situ remediation of soil. The impacts of nZVI (5-10% w/w) on the soil microbial biodiversity and functionality of two soils (Lufa 2.2 and 2.4) were assessed. Illumina MiSeq technology was used to evaluate the structure of soil microbiomes after 21 days of exposure. Proteobacteria, Verrucomicrobia, Firmicutes and Actinobacteria were the most abundant phyla in both soils. However, the dynamics of bacterial community composition following nZVI addition differed. nZVI exposure induced pronounced shifts in the microbial composition of soil 2.4, but not in soil 2.2; an increase in Verrucomicrobia abundance was the unique common taxonomic pattern observed in both soils. The PICRUSt approach was applied to predict the functional composition of each metagenome. Environmental information processing function (membrane transport) was decreased in both nZVI-spiked soils, although soil 2.4 samples were enriched in functions involved in cellular processes and metabolism. The effects of nZVI on autochthonous bacterial communities clearly varied with the soil type assessed; changes at the phylogenetic level appeared to be more abundant than those observed at the functional level, and thus, the overall effort of the soil ecosystem might involve the maintenance of functionality following nZVI exposure.

Relative importance of humic and fulvic acid on ROS generation, dissolution, and toxicity of sulfide nanoparticles

In this study, the effect of natural organic matter (NOM) composition (humic acid (HA) or fulvic acid (FA)) on dissolution, reactive oxygen species (ROS) generation, and toxicity of sulfide nanoparticles (NPs) was investigated under UV irradiation. NOM acted as a UV filter or antioxidant, decreasing ROS (O₂^-, OH, and ¹O₂) generation by WS₂ and MoS₂ NPs. The higher light-absorbing fractions of HA in NP/HA mixtures and the faster reaction rate of HA with ROS resulted in higher inhibition effect of HA than FA on O₂^- and OH generation by WS₂ and MoS₂ NPs. Both HA and FA completely inhibited ¹O₂ generation by WS₂ and MoS₂ NPs. NOM could transfer electrons to CdS and promote its O₂^- generation. No measurable amount of OH was generated by CdS with or without NOM. FA decreased ¹O₂ generation by CdS more significantly than HA due to the higher reaction rate between FA and ¹O₂. HA showed a higher inhibition effect on the dissolution rate of CdS and WS₂ NPs than FA. Both HA and FA played minor roles in the toxicity of CdS toward Escherichia coli but decreased the toxicity of MoS₂ and WS₂ due to the reduced ROS generation and/or dissolution concentrations.

Behavior and Potential Impacts of Metal-Based Engineered Nanoparticles in Aquatic Environments

The specific properties of metal-based nanoparticles (NPs) have not only led to rapidly increasing applications in various industrial and commercial products, but also caused environmental concerns due to the inevitable release of NPs and their unpredictable biological/ecological impacts. This review discusses the environmental behavior of metal-based NPs with an in-depth analysis of the mechanisms and kinetics. The focus is on knowledge gaps in the interaction of NPs with aquatic organisms, which can influence the fate, transport and toxicity of NPs in the aquatic environment. Aggregation transforms NPs into micrometer-sized clusters in the aqueous environment, whereas dissolution also alters the size distribution and surface reactivity of metal-based NPs. A unique toxicity mechanism of metal-based NPs is related to the generation of reactive oxygen species (ROS) and the subsequent ROS-induced oxidative stress. Furthermore, aggregation, dissolution and ROS generation could influence each other and also be influenced by many factors, including the sizes, shapes and surface charge of NPs, as well as the pH, ionic strength, natural organic matter and experimental conditions. Bioaccumulation of NPs in single organism species, such as aquatic plants, zooplankton, fish and benthos, is summarized and compared. Moreover, the trophic transfer and/or biomagnification of metal-based NPs in an aquatic ecosystem are discussed. In addition, genetic effects could result from direct or indirect interactions between DNA and NPs. Finally, several challenges facing us are put forward in the review.

Influence of dissolved organic matter on photogenerated reactive oxygen species and metal-oxide nanoparticle toxicity

The effect of humic acid (HA) or fulvic acid (FA) on reactive oxygen species (ROS) generation by six metal-oxide nanoparticles (NPs) and their toxicities toward Escherichia coli was investigated under UV irradiation. Dissolved organic matter (DOM) decreased OH generation by TiO2, ZnO, and Fe2O3, with FA inhibiting OH generation more than HA. The generated OH in NPs/DOM mixtures was higher than the measured concentrations because DOM consumes OH faster than its molecular probe. None of NPs/FA mixtures produced O2(-). The generated O2(-) concentrations in NPs/HA mixtures (except Fe2O3/HA) were higher than the sum of O2(-) concentrations that produced as NPs and HA were presented by themselves. Synergistic O2(-) generation in NPs/HA mixtures resulted from O2 reduction by electron transferred from photoionized HA to NPs. DOM increased (1)O2 generation by TiO2, CuO, CeO2, and SiO2, and FA promoted (1)O2 generation more than HA. Enhanced (1)O2 generation resulted from DOM sensitization of NPs. HA did not increase (1)O2 generation by ZnO and Fe2O3 primarily because released ions quenched (1)O2 precursor ((3)HA*). Linear correlation was developed between total ROS concentrations generated by NPs/DOM mixtures and bacterial survival rates (R(2) ≥ 0.80). The results implied the necessity of considering DOM when investigating the photoreactivity of NPs.

Impact of natural organic matter on particle behavior and phototoxicity of titanium dioxide nanoparticles

Due to their inherent phototoxicity and inevitable environmental release, titanium dioxide nanoparticles (nano-TiO2) are increasingly studied in the field of aquatic toxicology. One of the particular interests is the interactions between nano-TiO2 and natural organic matter (NOM). In this study, a series of experiments was conducted to study the impacts of Suwannee River natural organic matter (SRNOM) on phototoxicity and particle behaviors of nano-TiO2. For Daphnia magna, after the addition of 5mg/L SRNOM, LC50 value decreased significantly from 1.03 (0.89-1.20) mg/L to 0.26 (0.22-0.31) mg/L. For zebrafish larvae, phototoxic LC50 values were 39.9 (95% CI, 25.9-61.2) mg/L and 26.3 (95% CI, 18.3-37.8) mg/L, with or without the presence of 5mg/L SRNOM, respectively. There was no statistically significant change of these LC50 values. The impact of SRNOM on phototoxicity of nano-TiO2 was highly dependent on test species, with D. magna being the more sensitive species. The impact on particle behavior was both qualitatively and quantitatively examined. A global predictive model for particle behavior was developed with a three-way interaction of SRNOM, TiO2 concentration, and time and an additive effect of ionic strength. Based on power analyses, 96-h exposure in bioassays was recommended for nanoparticle-NOM interaction studies. The importance of reactive oxygen species (ROS) quenching of SRNOM was also systematically studied using a novel exposure system that isolates the effects of environmental factors. These experiments were conducted with minimal impacts of other important interaction mechanisms (NOM particle stabilization, NOM UV attenuation, and NOM photosensitization). This study highlighted both the particle stabilization and ROS quenching effects of NOM on nano-TiO2 in an aquatic system. There is an urgent need for representative test materials, together with key environmental factors, for future risk assessment and regulations of nanomaterials.

Engineered nanoparticles and organic matter: a review of the state-of-the-art

Growth in the development and production of engineered nanoparticles (ENPs) in recent years has increased the potential for interactions of these nanomaterials with aquatic and terrestrial environments. Carefully designed studies are therefore required in order to understand the fate, transport, stability, and toxicity of nanoparticles. Natural organic matter (NOM), such as the humic substances found in water, sediment, and soil, is one of the substances capable of interacting with ENPs. This review presents the findings of studies of the interaction of ENPs and NOM, and the possible effects on nanoparticle stability and the toxicity of these materials in the environment. In addition, ENPs and NOM are utilized for many different purposes, including the removal of metals and organic compounds from effluents, and the development of new electronic sensors and other devices for the detection of active substances. Discussion is therefore provided of some of the ways in which NOM can be used in the production of nanoparticles. Although there has been an increase in the number of studies in this area, further progress is needed to improve understanding of the dynamic interactions between ENPs and NOM.

Photochemical transformation and photoinduced toxicity reduction of silver nanoparticles in the presence of perfluorocarboxylic acids under UV irradiation

The impact of perfluorocarboxylic acids (PFCAs) with carbon chain length C2 to C8 on the dissolution, aggregation, reactive oxygen species (ROS) generation, and toxicity of citrate-coated AgNPs was investigated under UV irradiation. The presence of PFCAs decreased dissolution, aggregation, ROS generation, and toxicity of AgNPs because the negatively charged PFCAs sorbed on AgNP surface enhanced their stability. Both dissolution and aggregation rate of AgNPs decreased with chain length of PFCAs under UV irradiation, primarily because PFCAs with longer chain length sorbed on AgNP surface could form thicker coatings. The dissolution of AgNPs followed pseudo-first-order kinetics, and the rate constant decreased from 0.58 h(-1) with C2 to 0.30 h(-1) with C8. The hydrodynamic diameters of AgNPs linearly increased under UV irradiation with aggregation rates ranged from 72.1 to 143.5 nm/h. O2(•-) generation was observed in AgNP suspension with quantum yield of 0.12%, but was completely suppressed by PFCAs because they inhibited the interaction between photoelectrons and O2. A linear correlation was established between dissolved Ag(+) and bacterial survival rates of AgNPs with and without PFCAs under UV irradiation. This study highlights the necessity of considering coexisting organic contaminants when investigating the environmental behaviors of AgNPs.

Photodegradation routes of the herbicide bromoxynil in solution and sorbed on silica nanoparticles

Some organic contaminants dissolved in natural waters tend to adsorb on suspended particles and sediments. In order to mimic the photodegradation routes in natural waters of bromoxynil (BXN) adsorbed on silica, we here prepare and characterize silica nanoparticles modified with BXN (NP-BXN). We measure the direct photolysis quantum yield of aqueous BXN at 307 nm (0.064 ± 0.001) and detect the formation of bromide ions as a reaction product. Under similar conditions the photolysis quantum yield of BXN bonded to NP-BXN is much lower (0.0021 ± 0.0004) and does not lead to formation of bromide ions. The rate constant of the reaction of NP-BXN with the excited triplet states of riboflavin, a molecule employed as a proxy of chromophore dissolved organic matter (DOM) was measured in laser flash-photolysis experiments. The rate constants for the overall (kt) and chemical interaction (kr) of singlet oxygen with NP-BXN were also measured. Kinetic computer simulations show that the relevance of the direct and indirect (through reactions with reactive species generated in photoinduced processes) photodegradation routes of BXN is very much affected by sorption on silica. Immobilization of the herbicide on the particles, on one hand, affects the photolysis mechanism and lowers its photolysis quantum yield. On the other hand, the results obtained in aqueous suspensions indicate that immobilization also lowers the rate of collisional encounter, which affects the quenching rate constants of excited triplet states and singlet oxygen with the herbicide.

The effect of dichlorophen binding to silica nanoparticles on its photosensitized degradation in water

The production of dichlorophen (2,2'-methylenebis(4-chlorophenol), DCP) and its use as an anthelmintic and in pesticide products result in its direct release to the environment. To the purpose of modelling the possible photodegradation routes of DCP sorbed on sediments or suspended particles, the synthesis and characterization of silica nanoparticles modified with DCP (NP-DCP) is reported. The reactivity of NP-DCP with the excited states of riboflavin, a sensitizer usually present in natural waters, and with singlet oxygen were investigated. Comparison of the kinetic results obtained here to those previously reported for irradiated aqueous solutions of DCP allowed the discussion of the effect of adsorption of the pesticide on its photodegradation. We show with the aid of computer simulations that in natural waters the relevance of the different photodegradation routes dichlorophen is very much affected by attachment to sediments.

Enhanced adsorption and antifouling performance of anion-exchange resin by the effect of incorporated Fe3O4 for removing humic acid

The application of anion-exchange resins (AERs) is limited by fouling, which increases the fresh resin dosage, regeneration frequency, and amount of regeneration effluent. In this study, five AERs with different Fe3O4 amounts was prepared by increasing the amount of Fe3O4 added to 100 g of monomer mixture for suspension polymerization from 0 g to 40 g. Results showed considerably improved pore volume and hydrophilicity of the resin with increased Fe3O4 content, leading to significantly enhanced adsorption and desorption of humic acid. A method of developing novel resins with enhanced adsorption and antifouling abilities by incorporating Fe3O4 was then proposed. The adsorbent structure resulting from the incorporated inorganic particles was found to be important in determining the adsorption behavior of a hybrid adsorbent.