Microporous assembly of MnO2 nanosheets for malachite green degradation

Investigations on Chemically Synthesized Pure and Doped Manganese Dioxide Nanoparticles for Dye Removal and Photocatalytic Applications

Pure and Mg2+, Ni2+, Cd2+ doped MnO2 nanoparticles were synthesized by chemical co-precipitation method. These samples were characterised by PXRD, SEM, EDX, FTIR, UV-Vis-NIR, PL, Antibacterial, Cyclic Voltammetry, Dye Degradation and Photocatalytic studies. From the powder XRD studies, the crystallite size of the particle was calculated using Scherer formula and found that the synthesized nanoparticles were in the range from 10 to 12 nm. The morphology of all the synthesized samples was viewed from SEM micrograph. The composition and purity of the samples were identified from EDX studies. In FTIR spectra metal-oxygen stretching and bending modes of vibrations were observed. From the absorption spectra of UV-Vis optical analysis values of absorption coefficient, extinction coefficient, refractive index, real and imaginary part of optical dielectric constant and optical conductivity were compared. The band gap energy obtained from Tauc's plot varies from 1.21 to 1.51 eV exhibits semiconducting behaviour of all the synthesized samples. Investigations on photoluminecsence spectrum reveals blue shift in wavelength for doped nanooxides compared to pure MnO2. Antimicrobial activity of synthesised samples against gram positive and gram negative bacteria was determined. The obtained results reveal very high bacterial resistance in Cd2+ doped MnO2 nanoparticles with higher activity towards bacterial resistance compared to standard drug. The specific capacitance values were determined from Cyclic Voltammetry studies. Using the batch method of dye removing technique the percentage of malachite green dye removal was calculated. Also the photocatalytic efficiency of all the synthesized MnO2 samples in removing malachite green dye was studied by exposing to sunlight for different dosage and contact time. Ni2+ doped MnO2 shows relatively higher % of dye degradation capacity about 93% for 0.1 g of dosage of photocatalysts.

Fabrication and characterization of manganese dioxide (MnO2) nanoparticles and its degradation potential of benzene and pyrene

MnO2 nanoparticles have a wide range of applications, including catalytic abilities due to their oxygen reduction potential. Industrial processes and the burning of organic materials released PAHs into the biosphere which have adverse effects on living organisms when continually exposed. In this study, MnO2 nanoparticles were synthesized chemically using sodium thiosulphate as reducing agent. MnO2 nanoparticles were characterized using UV-visible adsorption spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). A X-Ray Diffraction Spectrophotometer (XRD), a Scanning Electron Microscopy - Energy Dispersive X-Ray Analyzer (SEM-EDAX), and Dynamic Light Scattering (DLS) were used to identify the crystalline nature and particle size of the fabricated MnO2 nanoparticles. Batch adsorption studies were conducted to identify the optimal conditions for better benzene and pyrene adsorption from aqueous solution using MnO2 nanoparticles. They are also effective in degrading benzene and pyrene by batch adsorption as determined by their adsorption isotherms and kinetics.

NO Reduction Reaction by Kiwi Biochar-Modified MnO2 Denitrification Catalyst: Redox Cycle and Reaction Process

NO is a major environmental pollutant. MnO2 is often used as a denitrification catalyst with poor N2 selectivity and weak SO2 resistance. Kiwi twig biochar was chosen to modify MnO2 samples by using the hydrothermal method. The NO conversion rates of the biochar-modified samples were >90% at 125–225 °C. Kiwi twig biochar made the C2MnO2 sample with a larger specific surface area, a higher number of acidic sites and Oβ/Oα molar ratio, leading to more favorable activity at high temperatures and better SO2 resistance. Moreover, the inhibition of the NH3 oxidation reaction and the Mn3+ → Mn4+ process played a crucial role in the redox cycle. What was more, Brønsted acidic sites present on the C1MnO2 sample participate in the reaction more rapidly. This study identified the role of biochar in the reaction process and provides a reference for the wide application of biochar.

Utilization of Sulfonated Waste Polystyrene-Based Cobalt Ferrite Magnetic Nanocomposites for Efficient Degradation of Calcon Dye

We presented a simple and efficient method for making a polymer–metal nanocomposite using various amounts of cobalt ferrite magnetic nanoparticles (CoFe₂O₄ MNp) with sulfonated waste polystyrene (SWPS) and utilized for Calcon dye degradation. The MNp was encapsulated with SWPS to avoid agglomeration and maintain its smaller size. ATR-FTIR, Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), dynamic light scattering (DLS), field emission scanning electron microscopy (FESEM), high-resolution transmittance electron microscopy (HR-TEM), atomic force microscopy (AFM) and solid UV were used to analyze the produced polymeric magnetic nanoparticles (SWPS/MNp). As the MNp loading increases, the average particle size decreases. For Calcon dye degradation, SWPS/MNp (20 wt%) was utilized with a smaller average particle size, and the structural changes were detected using a UV-Vis spectrophotometer. As a result, the Calcon dye’s characteristic absorbance peak at 515 nm was red-shifted to 536 and 565 nm after 5 min, resulting in a color shift from dark brown to light blue that could be seen with the naked eye. A strong linear correlation was found between the red-shifted absorbance and the concentration of dye solution over the range of 10–100 ppm under optimal conditions. The proposed dye degradation process is simple, efficient, and environmentally friendly and has been successfully used to purify organic azo-dye-containing water.

Progress on two-dimensional binary oxide materials

Two-dimensional van der Waals (2D vdW) materials have attracted much attention because of their unique electronic and optical properties. Since the successful isolation of graphene in 2004, many interesting 2D materials have emerged, including elemental olefins (silicene, germanene, etc.), transition metal chalcogenides, transition metal carbides (nitrides), hexagonal boron, etc. On the other hand, 2D binary oxide materials are an important group in the 2D family owing to their high structural diversity, low cost, high stability, and strong adjustability. This review systematically summarizes the research progress on 2D binary oxide materials. We discuss their composition and structure in terms of vdW and non-vdW categories in detail, followed by a discussion of their synthesis methods. In particular, we focus on strategies to tailor the properties of 2D oxides and their emerging applications in different fields. Finally, the challenges and future developments of 2D binary oxides are provided.

Inverse micelle fabrication of ordered mesoporous manganese oxide and degradation of tetracycline hydrochloride

Ordered mesoporous manganese oxides (MnO_x) were synthesized using the modified inverse micelle method. The crystal structure and surface morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The element content and changes in surface valence of catalysts were analyzed by X-ray photoelectron spectroscopy (XPS). The MnO_x were used to activate peroxymonosulfate (PMS) to degrade tetracycline hydrochloride (TCH). The catalytic activity of MnO_x was enhanced at a calcination temperature of 350 °C (MM-3). The degradation efficiency of TCH in MM-3/PMS system was 87.89% in 180 min. Appropriate dosages of catalyst and PMS improve the degradation efficiency of TCH. This system showed a wide range of pH application (3-9). In the presence of coexisting ions and humic acid, the degradation efficiency of TCH was still above 80%. The results of free radical capture experiment and electron paramagnetic resonance (EPR) test proved that the system activates PMS to produce three types of free radicals: SO₄^-, OH and ¹O₂. Therefore, MM-3 is a promising catalyst for the degradation of TCH in practical wastewater treatment.

A Simple Colorimetric Assay for Sensitive Cu2+ Detection Based on the Glutathione-Mediated Etching of MnO2 Nanosheets

In this paper, we developed a quick, economical and sensitive colorimetric strategy for copper ions (Cu²⁺) quantification via the redox response of MnO₂ nanosheets with glutathione (GSH). This reaction consumed MnO₂ nanosheets, which acted as a catalyst for the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB). In the presence of Cu²⁺, the GSH was catalyzed to GSSG (oxidized glutathione), and the solution changed from colorless to deep blue. Under the optimum conditions, the absorption signal of the oxidized product (oxTMB) became proportional to Cu²⁺ concentration in the range from 10 to 300 nM with a detection limit of 6.9 nM. This detection system showed high specificity for Cu²⁺. Moreover, the system has been efficaciously implemented for Cu²⁺ detection in actual tap water samples. The layered-nanostructures of MnO₂ nanosheets make it possess high chemical and thermal stability. TMB can be quickly oxidized within 10 min by the catalyzing of MnO₂ nanosheets with high oxidase-like activity. There is no need of expensive reagents, additional H₂O₂ and complicated modification processes during the colorimetric assay. Therefore, the strategy primarily based on MnO₂ nanosheets is promising for real-time, rapid and highly sensitive detection of Cu²⁺ under practical conditions.

Enhanced degradation mechanism of tetracycline by MnO2 with the presence of organic acids

In this study, we constructed MnO₂/organic acid (OA) systems using MnO₂ colloid, the most reactive phase of Mn(IV), and two kinds of OA (oxalic acid and l-tartaric acid). We investigated the effect of OA on tetracycline (TC) degradation by MnO₂. The results show that both OA obviously accelerate TC degradation by MnO₂. Mn(III) formed during the reaction lead to the acceleration. Mn(III)-oxalate complex formed in oxalic acid system resulted in the lower degradation efficiency than that in l-tartaric acid system. The acceleration of oxalic acid was decreased when the concentration was more than 75 μM, and even completely disappeared with the concentration of 500 μM, owning to the fact that excess oxalic acid decreased the pH and some MnO₂ was fast reduced to Mn²⁺ by oxalic acid and unable to react with TC. The impact of pH on TC degradation resulted from the influences of H⁺ on MnO₂ redox potentials and TC deprotonation. And acidic conditions accelerated TC degradation. The addition of Mg²⁺, Ca²⁺, Fe³⁺ and Zn²⁺ exhibited an inhibitory effect in both systems for their occupying reactive sites on MnO₂ surface and blocking the access of TC to MnO₂. Similar intermediates in the two systems were detected, indicating a similar TC degradation mechanism including a series of reactions like dehydration, hydroxylation and oxidation. The MnO₂/OA system provides an efficient treatment of TC in wastewater. And it is also noticeable that MnO₂/OA system should also have an important effect on the fate of pollutants in environment, from our results.

Ultra-efficient catalytic degradation of malachite green dye wastewater by KMnO4-modified biochar (Mn/SRBC)

In this work, KMnO₄-modified biochar was prepared from spirulina residue as the research object. Herein, we report the synthesis, characterization, and catalytic degradation performance of KMnO₄-modified biochar, given that heterogeneous catalytic oxidation is an effective way to treat dye wastewater rapidly. The Mn/SRBC catalyst prepared by KMnO₄ modification was characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, nitrogen adsorption–desorption and laser Raman spectroscopy. In addition, we compared the results with that of the unmodified SRBC. The results showed that the Mn/SRBC catalyst prepared by KMnO₄ modification had a rich pore structure, which provided sufficient contact area for the catalytic reaction. In the presence of H₂O₂, the catalyst could be used to catalyze the oxidative degradation of malachite green in aqueous solution with ultra-high efficiency. In the experiment, the initial pH values of the reaction system had a significant influence on the reaction rate. The removal effect of biochar on the malachite green was poor in an alkaline environment. Within a specific range, the removal rate of malachite green was proportional to the concentration of H₂O₂ in the reaction system. The degradation rate of malachite green dye at 8000 mg L⁻¹ was about 99% in the presence of the catalyst over 5 mmol L⁻¹ hydrogen peroxide for 30 min. These results show the potential application of algae residue biochar and carbon-based composite catalysts for degrading and removing dye wastewater.

In this work, KMnO₄-modified biochar was prepared from spirulina residue as the research object.

Hollow Polyaniline Microsphere/MnO2/Fe3O4 Nanocomposites in Adsorptive Removal of Toxic Dyes from Contaminated Water

Dyes are considered as recalcitrant compounds and are not easily removed through conventional water treatment processes. The present study demonstrated the fabrication of polyaniline hollow microsphere (PNHM)/MnO₂/Fe₃O₄ composites by in situ deposition of MnO₂ and Fe₃O₄ nanoparticles on the surface of PNHM. The physicochemical characteristics and adsorption behavior of the prepared PNHM/MnO₂/Fe₃O₄ composites towards the removal of toxic methyl green (MG) and Congo red (CR) dyes have been investigated. The characterization study revealed the successful synthesis of the prepared PNHM/MnO₂/Fe₃O₄ adsorbent with a high Brunauer-Emmett-Teller (BET) surface area of 191.79 m²/g. The batch adsorption study showed about 88 and 98% adsorption efficiencies for MG and CR dyes, respectively, at an optimum dose of 1 g/L of PNHM/MnO₂/Fe₃O₄ at pH ∼6.75 at room temperature (303 ± 3 K). The adsorption phenomena of MG and CR dyes were well described by the Elovich and pseudo-second-order kinetics, respectively, and Freundlich isotherm model. The thermodynamics study shows that the adsorption reactions were endothermic and spontaneous in nature. The maximum adsorption capacity (Q_max) for MG and CR dyes was observed as 1142.13 and 599.49 mg/g, respectively. The responsible adsorption mechanisms involved in dye removal were electrostatic interaction, ion exchange, and the formation of the covalent bonds. The coexisting ion study revealed that the presence of phosphate co-ion considerably reduced the CR dye removal efficiency. However, the desorption-regeneration study demonstrated the successful reuse of the spent PNHM/MnO₂/Fe₃O₄ material for the adsorption of MG and CR dyes for several cycles. Given the aforementioned findings, the PNHM/MnO₂/Fe₃O₄ nanocomposites could be considered as a promising adsorbent for the remediation of dye-contaminated water.

Degradation of synthetic dyes using nanoparticles: a mini-review

The industrial revolution has marked a strong impact on financial upgradation of several countries, and increase in the industrial establishment globally has direct impact on environment because of the release of unwanted product in air and inside the water bodies. The use of dyes has increased tremendously in various industries ranging from food, leather, textile, paper, cosmetic, pharmaceuticals, etc. The problem has emerged due to disposing of the dyes in the open environment, and mostly it is disposed along with the industrial wastes into the water bodies, which becomes harmful for animals, aquatic life and human health. This review highlights the role of the nanoparticles particularly biosynthesized nanoparticles for eliminating the dyes from the industrial wastewater. There are several methods for the synthesis of nanoparticle including physical, chemical and green synthesis of nanoparticles commonly known as biological method. Among all, the biological method is considered as the rapid, easy, eco-friendly and is being performed at mild conditions. The uses of nanoparticles for removal of dyes from water minimize the hazardous impact and thus considered to be the best approach as far as water quality and safety of environment is concerned.

Innovative electrochemical sensor for the precise determination of the new antiviral COVID-19 treatment Favipiravir in the presence of coadministered drugs

Due the current pandemic of COVID-19, an urgent need is required for serious medical treatments of a huge number of patients. The world health organization (WHO) approved Favipiravir (FAV) as a medication for patients infected with corona virus. In the current study, we report the first simple electrochemical, greatly sensitive sensor using MnO2-rGO nanocomposite for the accurate determination of Favipiravir (FAV). The developed sensor showed a high improvement in the electrochemical oxidation of FAV comparing to the unmodified screen-printed electrode (SPE). The suggested platform constituents and the electrochemical measurements parameters were studied. Under optimal experimental parameters, a current response to the concentration change of FAV was found to be in the linear range of 1.0 × 10-8-5.5 × 10-5 M at pH 7.0 with a limit of detection 0.11 µM and a quantification limit of 0.33 µM. The developed platform was confirmed by the precise analysis of FAV in real samples including dosage form and plasma. The developed platform can be applied in different fields of industry quality control and clinical analysis laboratories for the FAV determination.

Removal of tetracycline from an aqueous solution using manganese dioxide modified biochar derived from Chinese herbal medicine residues

Biochar (BC) derived from Chinese herbal medicine residues has been investigated for its performance as a potential adsorbent in tetracycline (TC) removal. In the present study, a chemical co-precipitation method was carried out to prepare manganese dioxide modified biochar (Mn-BC) to increase its sorption capacity. The properties of the modified biochar were characterized for further enhancing TC removal from an aqueous solution. Mn-BC was successfully synthesized and resulted in a much higher specific surface area, total pore volume and pore diameter. The sorption kinetics of TC on Mn-BC was described by the pseudo-second-order model. The sorption data of Mn-BC were fitted by Langmuir and Freundlich models. The study findings revealed a maximum adsorption capacity of Mn-BC (1:10) to TC was up to 131.49 mg/g. The adsorption process was endothermic and spontaneous. The degradation of TC was further enhanced by MnO₂ acting as an oxidizer on Mn-BC. Overall, the modified biochar derived from Chinese herbal medicine residues is a superior alternative for the removal of TC from an aqueous solution.

Multi-functional MnO2 nanomaterials for photo-activated applications by a plasma-assisted fabrication route

Supported MnO2-based nanomaterials were fabricated on fluorine-doped tin oxide substrates using plasma enhanced-chemical vapor deposition (PE-CVD) between 100 °C and 400 °C, starting from a fluorinated Mn(ii) diamine diketonate precursor. Growth experiments yielded β-MnO2 with a hierarchical morphology tuneable from dendritic structures to quasi-1D nanosystems as a function of growth temperature, whose variation also enabled a concomitant tailoring of the system fluorine content, and of the optical absorption and band gap. Preliminary photocatalytic tests were aimed at the investigation of photoinduced hydrophilic (PH) and solid phase photocatalytic (PC) performances of the present nanomaterials, as well as at the photodegradation of Plasmocorinth B azo-dye aqueous solutions. The obtained findings highlighted an attractive system photoactivity even under visible light, finely tailored by fluorine content, morphological organization and optical properties of the prepared nanostructures. The results indicate that the synthesized MnO2 nanosystems have potential applications as advanced smart materials for anti-fogging/self-cleaning end uses and water purification.

Insights into the Plasma-Assisted Fabrication and Nanoscopic Investigation of Tailored MnO2 Nanomaterials

Among transition metal oxides, MnO₂ is of considerable importance for various technological end-uses, from heterogeneous catalysis to gas sensing, owing to its structural flexibility and unique properties at the nanoscale. In this work, we demonstrate the successful fabrication of supported MnO₂ nanomaterials by a catalyst-free, plasma-assisted process starting from a fluorinated manganese(II) molecular source in Ar/O₂ plasmas. A thorough multitechnique characterization aimed at the systematic investigation of material structure, chemical composition, and morphology revealed the formation of F-doped, oxygen-deficient, MnO₂-based nanomaterials, with a fluorine content tunable as a function of growth temperature ( T_G). Whereas phase-pure β-MnO₂ was obtained for 100 °C ≤ T_G ≤ 300 °C, the formation of mixed phase MnO₂ + Mn₂O₃ nanosystems took place at 400 °C. In addition, the system nano-organization could be finely tailored, resulting in a controllable evolution from wheat-ear columnar arrays to high aspect ratio pointed-tip nanorod assemblies. Concomitantly, magnetic force microscopy analyses suggested the formation of spin domains with features dependent on material morphology. Preliminary tests in Vis-light activated photocatalytic degradation of rhodamine B aqueous solutions pave the way to possible applications of the target materials in wastewater purification.

Degradation of rhodamine B with manganese dioxide nanorods

This is an investigation on oxidative degradation of rhodamine B (RhB) by manganese dioxide (MnO₂) nanorods synthesized by redox co-precipitation method. Field emission scanning electron microscopy of MnO₂ nanorods at an electron voltage of 10 kV revealed a rod-like morphology for the synthesized nanoparticles. Fourier transform infrared spectra exhibited characteristic peaks of MnO₂. Surface area of MnO₂ nanorods was 277 m²/g. Effect of various parameters like initial concentration and pH of RhB solution, time of contact between MnO₂ nanorods and RhB, dosage of MnO₂, and stirring speed on decolouration of RhB was evaluated in batch experiments. Rapid decolouration in the initial period of the reaction was observed due to the adsorption of RhB molecules onto the surface of MnO₂ nanorods followed by oxidative degradation. Percentage decolouration decreased with increase in initial concentration and increased with increase in dosage, speed of stirring the mixture and with increase in pH up to pH 7. Near complete decolouration was achieved at a dose of 0.5 g/L of MnO₂ nanorods from 20 mg/L RhB solution within 3 min. Observations fitted best to the pseudo second order kinetic model. This study could pave the way for development of cost-effective, nontoxic nanostructures for treatment of wastewaters containing RhB.

Adsorptive removal of cationic and anionic dyes using graphene oxide

This paper presents the results of comparative study on the application of graphene oxide (GO) for the adsorptive removal of crystal violet (CV) and methyl orange (MO) in batch mode. GO, synthesised from graphite, was characterised by field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR) spectroscopy, point of zero charge (pH_PZC) and ultra violet (UV) spectroscopy. Dispersion of GO in water revealed the conversion of hydrophobic graphite into hydrophilic. Performance with regard to adsorption of CV and MO on GO was evaluated at different values of the operational parameters such as contact time between GO and the dye molecules, dosage of GO, and initial concentration and pH of the dye solution. Uptake and percentage removal of the dyes increased with increase in contact time and adsorbent dosage, but declined with increase in initial concentration of the dye. Experimental data on the uptake of dye molecules by GO showed good fit with the Freundlich isotherm model and the pseudo second order kinetic model. The maximum uptake by GO was higher for CV (207.4 mg/g) than that for MO (37.2 mg/g). Results indicate that GO is an effective adsorbent for the removal of CV but not for MO.

Rapid and high-performance adsorptive removal of hazardous acridine orange from aqueous environment using Abelmoschus esculentus seed powder: Single- and multi-parameter optimization studies

In this research, the performance of naturally abundant lignocellulosic by-product, Abelmoschus esculentus, and its processed seed powder referred as AESP, as a potential biosorbent for the removal of acridine orange (AO) from the aqueous environment was examined. The AESP biosorbent was characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) analysis, diffuse reflectance spectroscopy (DRS), Fourier transform infrared (FTIR) and pH_ZPC analyses. The average size of the biosorbent according to particle size distribution analysis was found to be ∼132 μm. The batch adsorption experiments were conducted by altering the parameters such as contact time, solution pH, biosorbent dosage, initial dye concentration, stirring speed and temperature. Sorption of cationic AO dye onto AESP was found to be rapid, and the equilibrium condition reached within 30 min. The isotherms (Langmuir, Freundlich, Redlich-Peterson and Sips), kinetic models (pseudo-first order, pseudo-second order, Elovich, intra-particle diffusion, Bangham and modified-Freundlich models) and thermodynamic parameters were also evaluated. High values of determination coefficients (R²) and minimal values of non-linear error functions (i.e. HYBRD, RMSE, MPSD, ARE, APE and χ²) indicated that experimental data were best fitted with Sips isotherm and pseudo-second order kinetic model. Accordingly, the maximum loading capacity of AESP was found to be 259.4, 284.3 and 346.5 mg/g for the temperatures of 15, 30 and 45 °C, respectively. The thermodynamic parameters showed that the adsorption of AO onto the AESP surface was an endothermic and spontaneous process. Besides these, the central composite experimental design (CCD) superimposed with response surface methodology (RSM) modeling was also employed to investigate the effect of four significant parameters (solution pH, contact time, initial AO concentration and AESP dosage) and their interaction-term effects on the adsorption capacity of AESP and to formulate the mathematical model for the experimental data using multi-variate statistical analysis. Maximum dye uptake capacity under the optimum conditions of variables (pH 8.96, contact time 32.06 min, initial dye concentration 867.71 mg/L and AESP dosage 1.89 g/L) was 312.1 mg/g at temperature 30 °C, and it was found to be very close to the experimentally determined values (313.4 ± 0.057 mg/g). The promising reusability potential of AESP using 0.1 M HCl, implied that, the lignocellulosic biosorbent AESP might be helpful for the appropriate designing of the environmental-friendly purification systems.

Removal mechanism of di-n-butyl phthalate and oxytetracycline from aqueous solutions by nano-manganese dioxide modified biochar

In this work, nano-manganese dioxide (nMnO₂)-modified biochar (BC) was synthesized in order to improve BC's adsorption capacity for di-n-butyl phthalate (DBP) and oxytetracycline (OTC). The results showed that nMnO₂ on the BC surface exhibited a poor crystallinity and oxidation state (Mn (IV)). Sorption experiments showed that, compared to BC, DBP sorption capacity of nMnO₂-BC (1:20) and OTC sorption capacity of nMnO₂-BC (1:10) were 0.0364 and 0.0867 mmol/g, respectively, which are significantly higher than that of BC (0.0141 and 0.0151 mmol/g). Kinetics and isotherm experiments indicated that physical adsorption and chemical interactions have both exerted their impacts on the adsorption process. Further X-ray photoelectron spectroscopy (XPS) analysis showed that part of the Mn (IV) in nMnO₂-BC was reduced to Mn (III) and Mn (II) after DBP or OTC adsorption. Therefore, we suggest the nMnO₂ also acted as an oxidizer on modified BC, which may accelerate the degradation of DBP and OTC.

Capturing Cd2+ ions from wastewater using PVA/α-MnO2–oleic acid nanocomposites

A poly(vinyl alcohol) nanocomposite containing α-MnO₂–oleic acid has been fabricated as an efficient adsorbent for capturing Cd²⁺ ions from aqueous solution.

Structural Distortion in MnO₂ Nanosheets and Its Suppression by Cobalt Substitution

Co-Mn oxide nanosheets with the chemical composition H_0.23Co_0.23Mn_0.77O₂ (C23M77NS) and MnO₂ nanosheets (M100NS) were prepared by exfoliation of layer-structured oxides via chemical processing in an aqueous medium. The optical properties of C23M77NS and M100NS were compared using UV-Vis spectroscopy, and the valence states of Mn and Co and local structures around them were examined using X-ray absorption spectroscopy. M100NS with an average Mn valence of 3.6 exhibits large structural distortion, whereas C23M77NS with an average Mn valence of 4.0 does not exhibit structural distortion. Spontaneous oxidization of Mn occurs during ion-exchange and/or exfoliation into nanosheets. These results have originated the hypothesis that structural distortion determines the valence state of Mn in compounds with CdI₂-type-structured MnO₂ layers.

Green and efficient biosorptive removal of methylene blue by Abelmoschus esculentus seed: Process optimization and multi-variate modeling

The present work explores, for the first time, the adsorptive removal of methylene blue (MB) dye from aqueous solution using different parts of abundantly available agricultural product, Abelmoschus esculentus (lady's finger), and the processed seed powder (designated as LFSP) was found as the best. The aforesaid biosorbent was characterized using field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR) and pH_ZPC analyses. The biosorption performance was evaluated using batch studies at 303 K, at varying operating conditions such as solution pH, biosorbent dosage, initial dye concentration and contact time. The pseudo-second order kinetic model was followed during the adsorption, and it was also found that intra-particle diffusion played a prominent role in the rate-controlling step. Langmuir and Temkin isotherms were followed the best, as was evident from the lower % non-linear error values and higher degree of determination coefficients. Thermodynamic investigations revealed that the biosorption processes were spontaneous and endothermic. Using the response surface methodology (RSM), a central composite design was developed, and subsequently applied as an input for the artificial neural network (ANN) approach in order to further analyze the interactive term effects between the significant process parameters, on the maximum biosorption capacity for MB dye removal by LFSP. The non-linear error functions and linear regression coefficients on the RSM model showed its dominance behaviour over ANN model for both data fitting and estimation capabilities. Using the statistical optimization, the maximum uptake capacity was found to be 205.656 mg/g. Experiments were conducted to regenerate the adsorbent and to recover the adsorbed dye using the eluent 0.5 M HCl. Cost analysis showed that, LFSP was 7 times cheaper than commercially available activated carbons.

Nanostructured MnO2 catalyst in E. crassipes (water hyacinth) for indigo carmine degradation

Se estudió el uso de la materia seca del jacinto de agua (Eichhornia crassipes) como matriz-soporte para nano-MnO2 y su eficiencia en la eliminación de índigo carmín (IC). Se ensayaron diferentes procesos de pretratamiento y los resultados indicaron que un tratamiento previo ácido-alcalino es un método eficiente para unir las nanopartículas (NPs) a la matriz celulósica. Así mismo, las NPs de MnO2 se sintetizaron por reducción sonoquímica de MnO4- utilizando diferentes métodos (un sistema emisor de ultrasonido, baño de ultrasonido y reacción convencional con etanol como medio). El material sintetizado se caracterizó por ATR-IR, AAS, DRX, SEM, isotermas de adsorción de nitrógeno, EDS y pHpzc. Se exploró la capacidad de eliminación de IC por parte del material nanoestructurado y la naturaleza química de los productos de degradación en muestras acuosas. Se analizó el efecto de diversos parámetros tales como temperatura, pH, concentración inicial de IC, entre otros. Finalmente, el material nanoestructurado, obtenido con un baño de ultrasonido, mostró una eficiencia de 97,6% en la eliminación del color característico de IC en 5 min, sin perder la eficiencia en la degradación del colorante por varios ciclos consecutivos. A través de este enfoque, se pueden eliminar efluentes ambientalmente peligrosos provenientes de actividades comerciales como la industria textil, de manera eficiente y a un bajo costo, mediante el uso de materiales nanocompuestos biodegradables cuya síntesis es de fácil aplicación.

Colorimetric detection of mercury ions using MnO2 nanorods as enzyme mimics

In this study, a simple and novel “off–on” colorimetric sensor for the detection of mercury ions (Hg²⁺) in aqueous solution was developed.