Acid-treated g-C3N4 with improved photocatalytic performance in the reduction of aqueous Cr(VI) under visible-light

The modified biochar from wheat straw by the combined composites of MnFe2O4 nanoparticles and chitosan Schiff base for enhanced removal of U(VI) ions from aqueous solutions

In the last few decades, U(VI) is a significant environmental threat. The innovative and environmentally friendly adsorbent materials for U(VI) removal were urgent. Preparation of the modified biochar from wheat straw by combined composites of MnFe2O4 nanoparticles and chitosan Schiff base (MnFe2O4@CsSB/BC) was characterized, and adsorption experiments were carried out to investigate the performance and interfacial mechanism of U(VI) removal. The results showed that MnFe2O4@CsSB/BC exhibited high adsorption capacity of U(VI) compared with BC. The adsorption process of U(VI) removal by MnFe2O4@CsSB/BC could be ascribed as pseudo-second-order model and Langmuir model. The maximum adsorption capacity of U(VI) removal by MnFe2O4@CsSB/BC reached 19.57 mg/g at pH4.0, 30 mg/L of U(VI), and 25 °C. The possible mechanism was a chemical adsorption process, and it mainly contained electrostatic attraction and surface complexation. Additionally, it also was an economic and environmental friendly adsorbent.

Fabrication of copper molybdate nanoflower combined polymeric graphitic carbon nitride heterojunction for water depollution: Synergistic photocatalytic performance and mechanism insight

In the scope, developed a novel copper molybdate decorated polymeric graphitic carbon nitride (CuMoO4@g-C3N4 or CMC) heterojunction nanocomposite in an easy solvothermal environment for the first time. The synthesized CMC improved the photocatalytic degradation of an antibiotic drug [ciprofloxacin (CIP)] and organic dye [Rhodamine B (RhB)]. Consequently, the CMC demonstrates a marvelous crystalline nature with ∼26 nm size, as obtained from XRD analysis. Besides, the surface morphology studies confirm the large-scale construction of flower-like CMC with a typical size of 10-15 nm. The CMC showed efficient catalytic activity for both the pollutants, achieving the degradation of 98% for RhB and 97% for CIP in 35 and 60 min, respectively. The reaction parameters including the concentration of pollutants, catalyst dosages, and scavengers are optimized for the best photocatalytic results. Notably, the trapping tests showed that the •OH and O2•- radicals are the primary oxidative species liable for the photocatalytic process. The recyclability test of the photocatalyst infers that the photocatalyst is highly stable up to the fifth recycle. Our work affords an efficient and ideal path to constructing the new g-C3N4-based architected photocatalyst for toxic wastewater treatment in the near future.

Synthesis and up-to-date applications of 2D microporous g-C3N4 nanomaterials for sustainable development

In recent years, with the development of industrial technology and the increase of people's environmental awareness, the research on sustainable materials and their applications has become a hot topic. Among two-dimensional (2D) materials that have been selected for sustainable research, graphitic phase carbon nitride (g-C3N4) has become a hot research topic because of its many outstanding advantages such as simple preparation, good electrochemical properties, excellent photochemical properties, and better thermal stability. Nevertheless, the inherent limitations of g-C3N4 due to its relatively poor specific surface area, rapid charge recombination, limited light absorption range, and inferior dispersion in aqueous and organic media have limited its practical application. In the review, we summarize and analyze the unique structure of the 2D microporous nanomaterial g-C3N4, its synthesis method, chemical modification method, and the latest application examples in various fields in recent years, highlighting its advantages and shortcomings, with a view to providing ideas for overcoming the difficulties in its application. Furthermore, the pressing challenges faced by g-C3N4 are briefly discussed, as well as an outlook on the application prospects of g-C3N4 materials. It is expected that the review in this paper will provide more theoretical strategies for the future practical application of g-C3N4-based materials, as well as contributing to nanomaterials in sustainable applications.

Environmental Applications of 3D g-C3N4-Based Hydrogel with Synergistic Effect of Adsorption and Photodegradation

In this paper, g-C₃N₄-based hydrogel with a 3D network structure was synthesized via a simple and cheap reaction, using hydroxyethyl cellulose (HEC) and graphitic carbon nitride (g-C₃N₄) as the main materials. Electron microscope images revealed that the microstructure of g-C₃N₄-HEC hydrogel was rough and porous. The luxuriant scaly textures of this hydrogel were due to the uniform distribution of g-C₃N₄ nanoparticles. It was found that this hydrogel showed great removal ability of bisphenol A (BPA) through a synergistic effect of adsorption and photodegradation. The adsorption capacity and degradation efficiency of g-C₃N₄-HEC hydrogel (3%) for BPA were 8.66 mg/g and 78% under the conditions of C₀ = 9.94 mg/L and pH = 7.0, which were much higher than those for the original g-C₃N₄ and HEC hydrogel. In addition, g-C₃N₄-HEC hydrogel (3%) exhibited excellent removal efficiency (98%) of BPA (C₀ = 9.94 mg/L) in a dynamic adsorption and photodegradation system. Meanwhile, the mechanism of removal was investigated in depth. The superior batch and continuous removal capability of this g-C₃N₄-based hydrogel make it promising for environmental applications.

Ni2P-Modified P-Doped Graphitic Carbon Nitride Hetero-Nanostructures for Efficient Photocatalytic Aqueous Cr(VI) Reduction

Targeting heterostructures with modulated electronic structures and efficient charge carrier separation and mobility is an effective strategy to improve photocatalytic performance. In this study, we report the synthesis of 2D/3D hybrid heterostructures comprising P-doped graphitic carbon nitride (g-C3N4) nanosheets (ca. 50–60 nm in lateral size) and small-sized Ni2P nanoparticles (ca. 10–12 nm in diameter) and demonstrate their prominent activity in the photocatalytic reduction of Cr(VI). Utilizing a combination of spectroscopic and electrochemical characterization techniques, we unveil the reasons behind the distinct photochemical performance of these materials. We show that Ni2P modification and P doping of the g-C3N4 effectively improve the charge-carrier transportation and spatial separation through the interface of Ni2P/P-doped g-C3N4 junctions. As a result, the catalyst containing 15 wt.% Ni2P exhibits superior photocatalytic activity in the detoxification of Cr(VI)-contaminated effluents under UV-visible light illumination, presenting an apparent quantum yield (QY) of 12.5% at 410 nm, notably without the use of sacrificial additives. This study marks a forward step in understanding and fabricating cost-effective photocatalysts for photochemical applications.

Composite of g-C3N4/ZnIn2S4 for efficient adsorption and visible light photocatalytic reduction of Cr(VI)

In this paper, the g-C₃N₄/ZnIn₂S₄ composite was synthesized by a two-stage hydrothermal method. The microstructure, surface, and optical properties of the composite were thoroughly characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) surface area analysis, and UV-Vis absorption spectroscopic analysis. The removal capacity of Cr(VI) was optimized by using ZnIn₂S₄ loaded in the composite. Meanwhile, the optimal pH environment for the reduction of Cr(VI) was determined to be about pH 3, and the reduction efficiency could reach more than 99% within 60 min. Further, the results of UV-Vis absorption analysis indicated the high and wide range of light absorption by composite compared with pure g-C₃N₄. Therefore, the enhanced photocatalytic performance of the composite could be attributed to the well-matched energy band structure between g-C₃N₄ and ZnIn₂S₄, which apparently promoted the effective separation and transfer of photogenerated carriers. In addition, the composite showed good stability in the visible light catalytic reaction, and the possible mechanism of the photocatalytic activity of Cr(VI) reduction by the composite was proposed.

The state of the art review on photocatalytic Cr(VI) reduction over MOFs-based photocatalysts: From batch experiment to continuous operation

This state of the art review presented the photocatalytic reduction from highly toxic Cr(VI) to lowly toxic Cr(III) with metal-organic frameworks (MOFs) and their composites. The construction of composites facilitated the transportation of the photo-induced charges to enhance the Cr(VI) reduction, in which the corresponding mechanisms were clarified by both experimental tests and DFT calculations. The immobilized MOFs onto some substrates accomplished continuous operations toward Cr(VI) reduction even under real solar light. As well, the environmental applications of the Cr(VI) reduction were analyzed, in which the influence factors toward the Cr(VI) reduction were clarified. This review reported that a big breakthrough was achieved from the batch experiment to the continuous operation for Cr(VI) reduction, in which MOFs demonstrated a bright prospective in the field of photocatalytic Cr(VI) reduction.

Sodium alkoxide-mediated g-C3N4 immobilized on a composite nanofibrous membrane for preferable photocatalytic activity

g-C3N4 is a classic photocatalyst not only owing to the metal-free semiconducting electronic structure but also tunable multifunctional properties. However, strategies for chemical exfoliation of g-C3N4 based on organic bases have been rarely reported. A family of sodium alkoxide-mediated g-C3N4 has been prepared via a simple synthesis. The degradation rate of bulk g-C3N4 is 39.8% when irradiation lasts 140 minutes. However, the degradation rate of g-C3N4-MeONa, g-C3N4-EtONa, and g-C3N4- t BuONa is 55.1%, 68.6%, and 79.1%, respectively, under the same conditions. Furthermore, g-C3N4- t BuONa has been immobilized on flexible electrospun PAN nanofibers to prepare floating photocatalysts. SEM analysis shows that the paper-based photocatalyst PAN/g-C3N4- t BuONa becomes a nanofiber membrane (A4 size, 210 mm × 297 mm). The nanofiber is approximately 350 nm in diameter. Interestingly, once synthesized, the g-C3N4- t BuONa particles move into the spinning solution, where the nanofiber wraps around them to form a monodisperse structure that resembles beads, or knots of 1-2 μm, on a string. The degradation efficiency of 10 mg L-1 MB solution can reach 100% for 2 hours until the solution becomes colorless. In addition, the photocatalytic mechanism studies have been validated. Different from H2SO4 or HNO3, this work has proposed a facile strategy for designing preferable floating photocatalysts using sodium alkoxide.

Superior removal of dyes by mesoporous MgO/g-C3N4 fabricated through ultrasound method: Adsorption mechanism and process modeling

The present research concerns the synthesis of a mesoporous composite characterized with high surface area and superior adsorption capacity in order to investigate its efficacity in removing hazardous and harmful dyes molecules from water. The synthesized mesoporous composite, MgO/g-C₃N₄ (MGCN), was successfully prepared through the sonication method in a methanolic solution followed by an evaporation and a calcination process. The configuration, crystalline phase, surface properties, chemical bonding, and morphological study of the fabricated nanomaterials were investigated via XRD, BET, FESEM, HRTEM, XPS, and FTIR instrumentation. The obtained nanomaterials were used as sorbents of Congo Red (CR) and Basic Fuchsin (BF) dyes from aqueous solutions. Batch elimination experimental studies reveal that the elimination of CR and BF dyes from an aqueous solution onto the MGCN surface was pH-dependent. The highest removal of CR and BF pollutants occurs, respectively, at pH 5 and 7. The absorptive elimination of CR and BF dyes into the MGCN surface was well-fitted with a pseudo-second-order kinetics and Langmuir model. In this concern, the maximum nanocomposite elimination capacity for CR and BF was observed to be 1250 and 1791 mg g^-1, respectively. This investigation confirms that MGCN composite is an obvious and efficient adsorbent of CR, BF, and other organic dyes from wastewater.

Iron Carbon Catalyst Initiated the Generation of Active Free Radicals without Oxidants for Decontamination of Methylene Blue from Waters

In conventional oxidation technologies for treatment of contaminated waters, secondary pollution of the aqueous environment often occurs because of the additional oxidants generated during the process. To avoid this problem, Fe/NG catalyst composites without additives were developed in this study for decontamination of methylene blue (MB) from waters. The Fe/NG catalyst, composed of carbon nitride and iron chloride (FeCl3·6H2O), was prepared by high temperature pyrolysis. It is an exceptionally efficient, recoverable, and sustainable catalyst for degradation of organic matter. The morphological characteristics, chemical structure, and surface properties of the catalyst composites were investigated. The catalyst exhibited high MB removal efficiency (100%) within 30 min under ambient temperature and dark conditions. The experiments indicated that an MB degradation effect was also applicable under most acid–base conditions (pH = 2–10). The characterization results using electron spin resonance and analysis of intermediate products demonstrated that free radicals such as ·OH and ·O2− were produced from the Fe/NG composites in the heterogeneous system, which resulted in the high MB degradation efficiency. Moreover, the catalysis reaction generated reducing substances, triggering iron carbon micro-electrolysis to spontaneously develop a microcurrent, which assisted the degradation of MB. This study demonstrates the feasibility of Fe/NG catalysts that spontaneously generate active species for degrading pollutants in an aqueous environment at normal temperature, providing an attractive approach for treating organic-contaminated waters.

Quick and sensitive colorimetric detection of amino acid with functionalized-silver/copper nanoparticles in the presence of cross linker, and bacteria detection by using DNA-template nanoparticles as peroxidase activity

In this project, poly (citric acid) (PCA) functionalized on nano Ag/Cu was synthesized by chemical analysis method. The nano probe was applied to detection of cysteine by using the magnesium (II) ions as a cross linker. The characterization of Ag/Cu/PCA nano probe was studied by using the UV-visible, morphological microscopy, dynamic light scattering, and zeta potential analyzer. The zeta potential and size of Ag/Cu/PCA were -38.0 mV and 18.0 nm, respectively. The prepared nano probe shows rapid response for detection of cysteine. The detection limit of Ag/Cu/PCA nano probe was 0.07 nM. Additional, the Ag/Cu/PCA nanoparticles was applied to cysteine detection from real samples in the presence of amino acids compounds. Rapidly and sensitive determination of Streptococcus pneumoniae is substantial for food safety and human health. The DNA-Ag/Cu/PCA were prepared as a template in chemical method and experimented as a bio-receptor for the cell bacteria detection as peroxidase-like catalytic process. The DNA-Ag/Cu/PCA nano probe shows a linear dynamic concertation range of Streptococcus pneumoniae via detection limit about 65 CFU/mL. The project presents that the DNA-Ag/Cu/PCA could detect the biological and bacterial samples via high accuracy.

Oxygen functionalized g-C3N4 strengthen Fe(III)/H2O2 system by accelerating Fe(III)/Fe(II) cycles under natural solar light: A mutual-promoting configuration

In response to the inherent restriction of low Fe(II) regeneration in the Fenton process, this study demonstrated a mutual-promoting configuration, where oxygen functionalized g-C₃N₄ (OCN) was applied in Fe(III)/H₂O₂ system to utilize mild natural solar light (SL) for persistent Fe(II) generation. The constructed OCN/Fe(III)/H₂O₂/SL system exhibited strong adaptability to various pollutants, and it well outperformed the g-C₃N₄ (GCN) modified system and the traditional Fenton system in pollutants degradation efficiency. Compared with GCN, OCN could significantly promote the Fe(II) generation under solar light (SL), leading to more efficient H₂O₂ activation. The characterization analyses revealed the larger surface area and enhanced charge separation of OCN, which were considered to take main responsibility for its enhanced photoactivity. The complexation of Fe(III) with the carboxyl groups of OCN also benefited the Fe(II) generation. ·OH was detected as the dominant radical responsible for metronidazole (MNZ) degradation, and its production in the OCN modified system was about twice that in the GCN modified system and the Fenton system. Moreover, the precipitation of FeO_x on the OCN surface benefited the charge separation of the OCN, so that the improved OCN enabled a slight enhancement of MNZ degradation in the reuse experiments. The intermediates of MNZ degradation were analyzed based on the results of LC-MS, which provided insight into MNZ degradation pathways. This work highlighted the concept of self-improving photocatalyst, the ingenious combination of photocatalysis and Fenton-like system formed a mutual-promoting situation where the OCN and the Fenton-like system could both be improved, which endowed the configuration great potential for green and economical oxidation in environmental remediation.

g-C3N4/Fe3O4 Nanocomposites as Adsorbents Analyzed by UPLC-MS/MS for Highly Sensitive Simultaneous Determination of 27 Mycotoxins in Maize: Aiming at Increasing Purification Efficiency and Reducing Time

According to known studies, numerous mycotoxins have been found simultaneously in foods and have a certain expansion toxicity, so the simultaneous detection of multiple mycotoxins is absolutely critical. In this article, multifunctional magnetic g-C₃N₄/Fe₃O₄ nanocomposites have been fabricated to employ as modified QuEChERS adsorbents. In addition, they were also used in conjunction with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), an accurate quantitative approach, to analyze 27 mycotoxins in maize. The improved method not only has a powerful adsorption effect on the complex matrix by g-C₃N₄/Fe₃O₄ but also enables magnetic separation from the sample solution. Experiments proved that this method can exhibit good linearity under the appropriate and optimal external environment (r² ≥ 0.9954), high sensitivity (the threshold of detection limit is 0.0004-0.6226 μg kg^-1, and the threshold of quantification limit is 0.0014-2.0753 μg kg^-1), adequate recoveries (77.81-115.21%), and excellent repeatability (with a threshold of intraday precision of 1.5-10.8% and interday precision in the range of 2.9-12.5%). In practice this method has been used to evaluate a variety of mycotoxins in maize specimens, and certain actual outcomes have been achieved.

Enhanced optical properties and photocatalytic activity of TiO2 nanotubes by using magnetic activated carbon: evaluating photocatalytic reduction of Cr(VI)

In recent years, photocatalytic reduction of Cr(VI) to Cr(III) by TiO₂ nanostructures, as a potent environmental technology has attracted a lot of attention. However, several defects including the large band gap energy of TiO₂, fast photogenerated charge recombination and re-oxidation of Cr(III) restrict their practical application. In this work, the incorporation of TiO₂ nanotubes (TNTs) with magnetic activated carbon (MAC) and photoreduction in the presence of a hole scavenger were studied as a preferable approach. The results revealed that coupling TNTs with 2 wt% MAC can boost the surface area from 89.54 to 307.87 m² g^-1 as well as decrease the band gap energy from 3.1 to 2.7 eV. As a consequence of the enhancement in textural features and optical properties, TNTs/MAC (2%) led to improvement of photoreduction efficiency (from 47% to 66%) in comparison with the TNTs. Meanwhile, the experiments demonstrated that using 0.2 g TNTs/MAC as an optimal dosage in acidic solution increases the photoreduction efficiency up to 81%. The hole scavenger investigation had a marvellous result. It was found that in the presence of oxalic acid, TNTs/MAC (2%) could reduce 97% of Cr(VI) which it was due to trapping oxidative species and charge-transfer-complex-mediated process. Furthermore, the kinetic study affirmed that the photoreduction follow first-order kinetics and the reaction rate constants by TNTs/MAC (2%) are 1.5 times as great as those of TNTs. Moreover, the reusability tests illustrated TNTs/MAC (2%) has good stability and is active even up to the six runs.

Facile synthesis of graphitic carbon nitride via copolymerization of melamine and TCNQ for photocatalytic hydrogen evolution

Graphitic carbon nitride (g-C₃N₄) has been regarded as an intriguing photocatalyst applying to hydrogen generation but suffering rapid recombination of photoinduced electron-hole pairs and insufficient absorption under visible light. We developed a novel one-pot thermal copolymerization method of melamine as a precursor and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as a comonomer to synthesize modified g-C₃N₄ (abbreviated as X% TCNQ) for the first time, aiming to directly incorporate TCNQ molecular into carbon nitride skeleton for the substitution of low-electronegative carbon for high-electronegative nitride atom. Results revealed that the as-prepared photocatalysts by copolymerization of melamine with TCNQ retained the original framework of g-C₃N₄, and dramatically altered the electronic and optical properties of carbon nitride. Various measurements confirmed that as-synthesized samples exhibited larger specific surface areas, faster photogenerated charge transfer and broader optical absorption by decreasing the π-deficiency and extending the π-conjugated system, thus facilitating the photocatalytic activity. Specifically, the 0.3% TCNQ exhibited as high as seven times than the pristine g-C₃N₄ on photocatalytic H₂ generation and kept its photoactivity for five circles. This work highlights a feasible approach of chemical protocols for the molecular design to synthesize functional carbon nitride photocatalysts by copolymerizing appropriate g-C₃N₄ precursor and comonomers.

Surface defective g-C3N4-xClx with unique spongy structure by polarization effect for enhanced photocatalytic removal of organic pollutants

Natural sponge is an ancient marine organism with a single lamellar structure, on which there are abundant porous channels to compose full-fledged spatial veins. Illumined by the natural spongy system, herein, the Cl doped surface defective graphite carbon nitride (g-C₃N_4-xCl_x) was constructed through microwave etching. In this process, microwave with HCl was employed to produce surface defects and peel bulk g-C₃N₄ to form natural spongy structured g-C₃N_4-xCl_x with three-dimensional networks. The spongy structure of the photocatalyst could provide abundant and unobstructed pathways for the transfer and separation of electron-hole pairs, and it was beneficial for photocatalytic reaction. The spongy defective g-C₃N_4-xCl_x achieved excellent degradation of diclofenac sodium (100%), bisphenol A (88.2%), phenol (85.7%) and methylene blue (97%) solution under simulated solar irradiation, respectively. The chlorine atoms were introduced into the g-C₃N₄ skeleton in microwave field with HCl, forming C-Cl bonds and surface polarization field, which could significantly accelerate the separation of photogenerated electrons and holes. As an efficient and universal approach, microwave etching can be generally used to create surface defects for most photocatalysts, which may have potential applications in environmental purification, energy conversion and photodynamic therapy.

Emerging Chemical Functionalization of g-C3N4: Covalent/Noncovalent Modifications and Applications

Atomically 2D thin-layered structures, such as graphene nanosheets, graphitic carbon nitride nanosheets (g-C₃N₄), hexagonal boron nitride, and transition metal dichalcogenides are emerging as fascinating materials for a good array of domains owing to their rare physicochemical characteristics. In particular, graphitic carbon nitride has turned into a hot subject in the scientific community due to numerous qualities such as simple preparation, electrochemical properties, high adsorption capacity, good photochemical properties, thermal stability, and acid-alkali chemical resistance, etc. Basically, g-C₃N₄ is considered as a polymeric material consisting of N and C atoms forming a tri-s-triazine network connected by planar amino groups. In comparison with most C-based materials, g-C₃N₄ possesses electron-rich characteristics, basic moieties, and hydrogen-bonding groups owing to the presence of hydrogen and nitrogen atoms; therefore, it is taken into account as an interesting nominee to further complement carbon in applications of functional materials. Nevertheless, g-C₃N₄ has some intrinsic limitations and drawbacks mainly related to a relatively poor specific surface area, rapid charge recombination, a limited light absorption range, and a poor dispersibility in both aqueous and organic mediums. To overcome these shortcomings, numerous chemical modification approaches have been conducted with the aim of expanding the range of application of g-C₃N₄ and enhancing its properties. In the current review, the comprehensive survey is conducted on g-C₃N₄ chemical functionalization strategies including covalent and noncovalent approaches. Covalent approaches consist of establishing covalent linkage between the g-C₃N₄ structure and the chemical modifier such as oxidation/carboxylation, amidation, polymer grafting, etc., whereas the noncovalent approaches mainly consist of physical bonding and intermolecular interaction such as van der Waals interactions, electrostatic interactions, π-π interactions, and so on. Furthermore, the preparation, characterization, and diverse applications of functionalized g-C₃N₄ in various domains are described and recapped. We believe that this work will inspire scientists and readers to conduct research with the aim of exploring other functionalization strategies for this material in numerous applications.

Novel Two-Dimensional AgInS2/SnS2/RGO Dual Heterojunctions: High Spatial Charge and Toxicity Evaluation

A single semiconductor employed into photo(electro)catalysis is not sufficient for charge carrier separation. Designing a multiple heterojunction system is a practical method for photo(electro)catalysis. Herein, novel two-dimensional AgInS₂/SnS₂/RGO (AISR) photocatalysts with multiple junctions were prepared by a simple hydrothermal method. The synthesized AISR heterojunctions showed superior photoelectrochemical performance and photocatalytic degradation of norfloxacin, with a high degradation rate reaching 95%. More importantly, the toxicity of photocatalytic products decreased within the reaction process. High spatial separation efficiency of photogenerated electron-hole pairs was evidenced by optical and photoelectrochemical characterizations. Furthermore, a laser flash photolysis technique was carried on investigating the lifetime of the charge carrier of the fabricated dual heterostructures. In addition, sulfur and oxygen vacancies existed in AISR heterojunctions could largely constrain the recombination of electron-hole pairs. Density functional theory calculations were carried out to analyze the mechanism of photoinduced interfacial redox reactions, showing that reduced graphene oxide and AgInS₂ act as electron and hole trappers in the photocatalytic reaction, respectively. Due to the interfacial electric field formed from AISR dual heterojunctions, the effective spatial charge separation and transfer contributed to the boosting photo(electro)catalytic performance.

Photochemical transformation of C3N4 under UV irradiation: Implications for environmental fate and photocatalytic activity

In this study, the photo-transformations of bulk C₃N₄ (CN) and oxidized C₃N₄ (OCN) under UV-irradiation were examined. Through NO₃^- release measurements, we found that the photo-transformation rate of OCN is higher than that of CN. Various characterization results revealed the structural and chemical properties changes of CN and OCN after photo-transformation. We proposed that under reactive oxygen species attack, CN and OCN were gradually broken into smaller fragments and finally mineralized into NO₃-, CO₂, and H₂O through the circular reactions of deamination-hydroxylation-decarboxylation. Through the zeta potential measurements and sedimentation experiments, the influence of photo-transformation on the water stabilities of CN and OCN were assessed. The stability of CN in water increased while the water stability of OCN decreased after photo-transformation, implying that the changes to C₃N₄-based materials caused by photo-transformation may significantly impact their environmental behaviors. Moreover, the photocatalytic activities of the photo-transformed OCN and CN substantially decreased, indicating that the structural changes might be the main reason for their photocatalytic activity loss. These findings highlight the non-negligible influence of photo-transformation on the fate of C₃N₄ in aquatic environments, as well as on the photochemical stability during its use.

Superior uniform carbon nanofibers@g-C3N4 core-shell nanostructures embedded by Au nanoparticles for high-efficiency photocatalyst

Ultrathin g-C₃N₄ nanolayers were uniformly assembled on Au nanoparticles (NPs) decorated carbon nanofiber (CNFs) by a facile gas-solid approach. The mean thickness of g-C₃N₄ shell layers on CNFs-Au supports was about 22.5 nm. The ternary system of as-prepared photocatalysts with superior uniformly core-shell nanostructures present enhanced photocatalytic properties. The rate constants (rhodamine B and K₂Cr₂O₇) of CNFs-Au@g-C₃N₄ were about 3.5 and 4.5 times of g-C₃N₄ powders, respectively. While the rate of H₂-evolution was 2.3-fold of the physical mixture, when the loading amount of Au NPs was about 0.52 At.%. Their excellent photocatalytic activities were attributed to the advantages of their unique core-shell nanostructures and the synergy of the Au NPs as a high-efficiency electron conduction bridge and their surface plasmon resonance (SPR) effect. Moreover, the ternary systems of CNFs-Au@g-C₃N₄ present the gratifying cycling stability in photocatalytic reactions due to their ultra-long core-shell nanostructures. Our work provides a novel route for designing and constructing multicomponent photocatalyst in wastewater treatment and solar energy applications.

Polyaniline modified MIL-100(Fe) for enhanced photocatalytic Cr(VI) reduction and tetracycline degradation under white light

The Z-scheme MIL-100(Fe)/PANI composite photocatalysts were facilely prepared from MIL-100(Fe) and polyaniline (PANI) by ball-milling, and were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), UV-visible diffuse-reflectance spectrometry (UV-vis DRS), X-ray photoelectron spectroscopy (XPS) and photoluminescence emission spectrometry (PL). The photocatalytic activities of MIL-100(Fe)/PANI composites were investigated via tetracycline degradation and hexavalent chromium reduction in aqueous solution under the irradiation of white light. The results revealed that the MIL-100(Fe)/PANI composite photocatalysts exhibited outstanding photocatalytic activities toward Cr(VI) reduction and tetracycline decomposition. The effects of pH and coexisting ions on the photocatalytic Cr(VI) reduction were investigated. As well, the primary active species were identified via electron spin resonance (ESR) determination. A possible Z-scheme photocatalyst mechanism was proposed and verified. Finally, MIL-100(Fe)/PANI composites demonstrated good reusability and stability in water solution, implying potentially practical applications for real wastewater treatment.

Three-dimensional microspheric g-C3N4 coupled by Broussonetia papyrifera biochar: facile sodium alginate immobilization and excellent photocatalytic Cr(iv) reduction

Photocatalysts comprising Broussonetia papyrifera biochar and g-C3N4 loaded on sodium alginate were prepared and characterized in terms of reusability and photocatalytic Cr(vi) reduction performance. The observed photocurrent responses as well as photoluminescence and UV-visible diffuse reflectance spectra showed that the best-performing catalyst featured the benefits of efficient photogenerated charge separation, superior electron conductance/transfer, and excellent light adsorption ability, which resulted in a higher photocatalytic Cr(vi) reduction performance compared to that of pure g-C3N4 powder. The prepared composite was shown to be reusable and well separable from the reaction mixture, thus being a promising material for the practical photocatalytic removal of Cr(vi) from wastewater. The trapping experiment and XPS spectra of catalysts after reactions confirm that the decontamination of Cr(vi) lies in the photocatalytic reduction of this species into low-toxicity Cr(iii) by photoinduced electrons generated from g-C3N4, followed by the adsorption of Cr(iii) on biochar or alginate with large specific areas.

Nonmetallic Abiotic-Biological Hybrid Photocatalyst for Visible Water Splitting and Carbon Dioxide Reduction

Both artificial photosystems and natural photosynthesis have not reached their full potential for the sustainable conversion of solar energy into specific chemicals. A promising approach is hybrid photosynthesis combining efficient, non-toxic, and low-cost abiotic photocatalysts capable of water splitting with metabolically versatile non-photosynthetic microbes. Here, we report the development of a water-splitting enzymatic photocatalyst made of graphitic carbon nitride (g-C₃N₄) coupled with H₂O₂-degrading catalase and its utilization for hybrid photosynthesis with the non-photosynthetic bacterium Ralstonia eutropha for bioplastic production. The g-C₃N₄-catalase system has an excellent solar-to-hydrogen efficiency of 3.4% with a H₂ evolution rate up to 55.72 μmol h⁻¹ while evolving O₂ stoichiometrically. The hybrid photosynthesis system built with the water-spitting g-C₃N₄-catalase photocatalyst doubles the production of the bioplastic polyhydroxybutyrate by R. eutropha from CO₂ and increases it by 1.84-fold from fructose. These results illustrate how synergy between abiotic non-metallic photocatalyst, enzyme, and bacteria can augment solar-to-multicarbon chemical conversion.

•

H₂O₂-degrading enzymes from R. eutropha enable visible-light water splitting by C₃N₄

•

C₃N₄ coupled with bovine catalase has a solar-to-hydrogen efficiency of 3.4%

•

C₃N₄-catalase increases CO₂ conversion into bioplastic under light by R. eutropha

•

Heterotrophic bioplastic production by R. eutropha is also improved by C₃N₄-catalase

Synergistic Effect of Hydrochloric Acid and Phytic Acid Doping on Polyaniline-Coupled g-C3N4 Nanosheets for Photocatalytic Cr(VI) Reduction and Dye Degradation

In this study, graphitic carbon nitride (g-C₃N₄) nanosheets (CNns) were modified using polyaniline (PANI) codoped with an inorganic (hydrochloric acid, HCl) and an organic (phytic acid, PA) acid. Our results revealed that these samples exhibited extended visible-light absorption and a three-dimensional (3D) hierarchical structure with a large specific surface area. They also inhibited photoluminescence emission, reduced electrical resistance, and provided abundant free radicals, resulting in high photocatalytic performance. The PANI/g-C₃N₄ sample demonstrated outstanding photocatalytic activity of a Cr(VI) removal capacity of 4.76 mg·min^-1·g_c^-1, which is the best record for the reduction of a 100 ppm K₂Cr₂O₇ solution. Moreover, g-C₃N₄ coupled with PANI monotonically doped with HCl or PA did not demonstrate increased activity, suggesting that the codoping of HCl and PA plays a significant role in enhancing the performance. The improved photocatalytic activity of PANI/g-C₃N₄ can be attributed to the interchain and intrachain doping of PA and HCl over PANI, respectively, to create a 3D connected network and synergistically increase the electrical conductivity. Therefore, new insights into g-C₃N₄ coupled with PANI and codoped by HCl and PA may have excellent potential for the design of g-C₃N₄-based compounds for efficient photocatalytic reactions.

Synergy of Photocatalysis and Adsorption for Simultaneous Removal of Hexavalent Chromium and Methylene Blue by g-C3N4/BiFeO3/Carbon Nanotubes Ternary Composites

A novel graphite-phase carbon nitride (g-C₃N₄)/bismuth ferrite (BiFeO₃)/carbon nanotubes (CNTs) ternary magnetic composite (CNBT) was prepared by a hydrothermal synthesis. Using this material, Cr(VI) and methylene blue (MB) were removed from wastewater through synergistic adsorption and photocatalysis. The effects of pH, time, and pollutant concentration on the photocatalytic performance of CNBT, as well as possible interactions between Cr(VI) and MB species were analyzed. The obtained results showed that CNTs could effectively reduce the recombination rate of electron-hole pairs during the photocatalytic reaction of the g-C₃N₄/BiFeO₃ composite, thereby improving its photocatalytic performance, while the presence of MB increased the reduction rate of Cr(VI). After 5 h of the simultaneous adsorption and photocatalysis by CNBT, the removal rates of Cr(VI) and MB were 93% and 98%, respectively. This study provides a new theoretical basis and technical guidance for the combined application of photocatalysis and adsorption in the treatment of wastewaters containing mixed pollutants.

Quenching-Induced Structural Distortion of Graphitic Carbon Nitride Nanostructures: Enhanced Photocatalytic Activity and Electrochemical Hydrogen Production

Engineered nanomaterials are emerging in the field of environmental chemistry. This study involves the analysis of the structural, electronic, crystallinity, and morphological changes in graphitic carbon nitride (g-C₃N₄), an engineered nanomaterial, under rapid cooling conditions. X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Brunauer-Emmett-Teller, Fourier transform infrared, Raman, band gap, and Mott-Schottky analyses strongly proved that the liquid N₂-quenched sample of g-C₃N₄ has structural distortion. The photocatalytic efficiency of engineered g-C₃N₄ nanostructures was analyzed through the degradation of reactive red 120 (RR120), methylene blue (MB), rhodamine B, and bromophenol as a representative dye. The photocatalytic dye degradation efficiency was analyzed by UV-vis spectroscopy and total organic carbon (TOC) analysis. The photocatalytic efficiency of g-C₃N₄ under different quenching conditions included quenching at room temperature in ice and liquid N₂. The degradation efficiencies are found to be 4.2, 14.7, and 82.33% for room-temperature, ice, and liquid N₂ conditions, respectively. The pseudo-first-order reaction rate of N₂-quenched g-C₃N₄ is 9 times greater than the ice-quenched g-C₃N₄. Further, the TOC analysis showed that 55% (MB) and 59% (RR120) of photocatalytic mineralization were achieved within a time duration of 120 min by the liquid N₂-quenched g-C₃N₄ nanostructure. In addition, the quenched g-C₃N₄ electrocatalytic behavior was examined via the hydrogen (H₂) evolution reaction in acidic medium. The liquid N₂-quenched g-C₃N₄ catalyst showed a lower overpotential with high H₂ evolution when compared with the other two g-C₃N₄-quenched samples. The results obtained provide an insight and extend the scope for the application of engineered g-C₃N₄ nanostructures in the degradation of organic pollutants as well as for H₂ evolution.

Controlled Microwave-Assisted Synthesis of the 2D-BiOCl/2D-g-C3N4 Heterostructure for the Degradation of Amine-Based Pharmaceuticals under Solar Light Illumination

Designing efficient 2D-bismuth oxychloride (BiOCl)/2D-g-C₃N₄ heterojunction photocatalysts by the microwave-assisted method was studied in this work using different amounts of BiOCl plates coupled with g-C₃N₄ nanosheets. The effects of coupling the 2D structure of g-C₃N₄ with the 2D structure of BiOCl were systematically examined by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy, X-ray diffraction, photoluminescence (PL), lifetime decay measurement, surface charges of the samples at various pH conditions, and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The prepared photocatalysts were used for the degradation of amine-based pharmaceuticals, and nizatidine was used as a model pollutant to evaluate the photocatalytic activity. The UV-vis DRS and other optical properties indicated the major effect of coupling of BiOCl with g-C₃N₄ into a 2D/2D structure. The results showed a narrowing in the band gap energy of the composite form, whereas the PL and lifetime analysis showed greater inhibition of the electron-hole recombination process and slightly longer charge carrier lifetime. Accordingly, the BiOCl/g-C₃N₄ composite samples exhibited an enhancement in the photocatalytic performance, specifically for the 10% BiOCl/g-C₃N₄ sample. Moreover, the zeta potential of this sample at different pH values was evaluated to determine the isoelectric point of the synthesized composite material. Consequently, the pH was adjusted to match the isoelectric point of the complex materials, which further enhanced the activity. Further degradation of pharmaceuticals was studied under solar light irradiation, and 96% degradation was achieved within 30 min.