Rapid removal of tetracycline antibiotics from water by coagulation-flotation of sodium dodecyl sulfate and poly(allylamine hydrochloride) in the presence of Al(III) ions

N,S,O triply-doped carbon with nanotubes-interwoven nanosheets encapsulated Co nanoparticles for robust antibiotic destruction via activating peroxymonosulfate

The development of facile and effective approaches to regulate the stability and reusability of metallic Co catalytic materials towards peroxymonosulfate (PMS) activation for remediating antibiotic pollutants remains challenging. In this study, we develop a one-step pyrolysis strategy to fabricate three-dimensional porous architecture assembled with N,S,O-codoped carbon nanotube-interwoven hierarchically porous carbon nanosheets encapsulated Co nanoparticles (Co@NSOC), which serve as chainmail catalysts for stable and reusable degradation of tetracycline hydrochloride (TCH) through PMS activation. The optimal Co@NSOC-700-activated PMS system presents an excellent removal efficiency of 94.1 % for TCH within 10 min and a high cycling efficiency of 92.9 % after eight cycles. The encapsulated structure, abundant catalytic sites, superior hydrophilicity and strong magnetism contribute to the high performance. Further investigation demonstrates that both radical and nonradical pathways contribute to the TCH destruction, and 1O2 is verified as the dominant reactive substance. The possible degradation pathways and the toxicity of intermediates for TCH are evaluated. This work offers an innovative structure design and surface modulation strategy to fabricate robust catalysts towards environmental remediation.

Iron‑calcium dual crosslinked graphene oxide/alginate aerogel microspheres for extraordinary elimination of tetracycline in complex wastewater: Performance, mechanism, and applications

Antibiotics have been considered as a group of emerging contaminants for their stable chemical structure, significant pseudo-persistence, and biological toxicity. Tetracycline (TC), as one of the typical antibiotics frequently detected in environmental media, can cause the dissemination and accumulation of antibiotic resistance gene (ARG), ultimately threatening human health and environmental safety. Herein, a novel iron‑calcium di-crosslinked graphene oxide/alginate (GO/SA-Fe3+-Ca2+) aerogel was facilely synthesized for TC uptake. It was found that the introduction of GO nanosheets and Fe3+ sites into composite enormously enhanced TC removal. Specifically, TC can be stably and efficiently eliminated over the wide pH range of 5-8. The fitted maximum qe with Liu isotherm model at 308 K reached 1664.05 mg/g, surpassing almost all reported sorbents. The pseudo-second-order kinetic model with chemical sorption characteristics better fitted TC adsorption process, which was endothermic and spontaneous in nature. Multifarious adsorptive sites of GO/SA-Fe3+-Ca2+ synergically participated in TC uptake through multi-mechanisms (e.g., π-π EDA, cation-π bonding, H-bonding, Fe3+-coordination, and electrostatic attraction, etc.). The as-prepared composite showed satisfactory TC removal in several runs of adsorption-desorption operations, high salinity, and model aquaculture wastewater. Moreover, the packed-column could continuously run for >200 h until adsorption saturation was achieved with a dynamic adsorption capacity of 216.69 mg/g, manifesting its scale-up engineering applications. All above merits make as-constructed composite an alternative sorbent for eliminating TC from complex wastewater.

Precursor-oriented design of nano-alumina for efficient removal of antibiotics

Rapid and efficient removal of environmental antibiotics is vital to curb bacterial resistance. Through rational precursors-oriented design, we attain the best Al2O3 absorbent by 500 °C calcination of ammonium aluminium carbonate hydroxide (AACH) precursor from NH4HCO3 route (AACH-NH4HCO3-500) for fast and efficient removal of tetracycline (TC) and other antibiotics from environmental waters including high-salinity wastewater. AACH-NH4HCO3-500 (0.25 g·L-1) can remove (69.92 ± 1.78)% of aqueous TC (0.025 g·L-1) within 5 min and (97.62 ± 2.75)% within 2 h, and the adsorption capacity is 444.4 mg·g-1, which is the highest qmax of TC for the 2 h-adsorptions among numerous adsorbents. AACH-NH4HCO3-500 has fine tolerance to the coexisting substances, and can be easily regenerated and reused, and has no harm even discarded. The relations among the synthetic methods, the structural features, and the adsorption functions of Al2O3 are disclosed through a systematic comparison of the commercial Al2O3 and different Al2O3 nanomaterials attained from three precursors produced by five different routes. The reasons behind the exceptional adsorption performance are discussed throughout. Our findings would facilitate the development of excellent adsorbents for removal of other pollutants.

Experimental and theoretical revealing of piezo-photocatalyst Bi2O2CO3 for degradation of ciprofloxacin in water

In this report, we have attempted to experimentally and theoretically reveal a new piezo-photocatalyst Bi2O2CO3 for efficient removal of ciprofloxacin (CIP) from water. Bi2O2CO3 nanoplates were synthesized to evaluate their photocatalytic (irradiation source: simulated-sunlight), piezocatalytic (irradiation source: ultrasonic) and piezo-photocatalytic (irradiation source: simulated-sunlight and ultrasonic) performances for CIP elimination. Under the condition CCIP = 10 mg/L and Ccatalyst = 1 g/L, the piezo-photodegradation rate constant is obtained as kapp = 0.07811 min-1, which surpasses that of photocatalysis (kapp = 0.04686 min-1) and piezocatalysis (kapp = 0.01233 min-1); this phenomenon manifests an obvious piezo-enhanced photocatalytic behavior in terms of the "1 + 1 > 2" principle. The ultrasonic-induced piezoelectric behavior in Bi2O2CO3 nanoplates and involved piezo-photocatalytic mechanism were theoretically elucidated by density functional theory (DFT) and finite-element method (FEM) studies. Additionally, the effects of various factors on the CIP degradation, decomposition mechanism of CIP and toxicity of the decomposition intermediates were also analyzed.

Volatile and semi-volatile organic compounds in landfill leachate: Concurrence, removal and the influencing factors

Volatile and semi-volatile organic compounds (VOCs and SVOCs) carried by landfilled wastes may enter leachate, and require appropriate treatment before discharge. However, the driving factors of the entry of VOCs and SOVCs into leachate, their removal characteristics during leachate treatment and the dominant factors remain unclear. A global survey of the VOCs and SOVCs in leachate from 103 landfill sites combined with 27 articles on leachate treatment was conducted to clarify the abovementioned question. The results showed that SVOCs such as polycyclic aromatic hydrocarbons (PAHs), phthalate acid esters (PAEs) and phenols were the most frequently detected in leachate on a global scale. However, four kinds of VOCs, i.e., toluene, ethylbenzene, xylenes and benzene, were frequently detected at high concentrations in landfill leachate as well. The concentrations of VOCs and SVOCs in leachate ranged from 1 × 10° to 1 × 108 ng/L. Solubility was a key factor driving the entry of VOCs and SOVCs into leachate, and higher solubility enables higher detectable concentrations in leachate (P<0.05). It was easiest to remove monocyclic aromatic hydrocarbons (MAHs) from leachate, followed by phenols and PAHs, and it was most difficult to remove PAEs. In terms of removing MAHs, the anoxic/oxic (A/O) process and the sequential batch reactor (SBR) process were comparable to the advanced oxidization process and far superior to the ultrafiltration and nanofiltration processes, and the removal rate increased with an increase in the Henry's constant and/or the hydrophilicity of the contaminants during the A/O and SBR processes (P<0.05). There were no significant differences among biological, advanced oxidation and reverse osmosis processes in the removal of phenolic. In terms of removing PAHs, the A/O process was comparable to the advanced oxidization process and more efficient than the other treatment processes. As to removing PAEs, the membrane bioreactor process was almost the same efficient as the advanced oxidization process and far more efficient than the other biological treatment processes. Future research should focus on the pollution of atmospheric VOCs and SVOCs near aeration units in leachate treatment plants, as well as the health risk assessment of VOCs and SVOCs in the treated leachate effluent. To the best of our knowledge, this is the first review regarding the occurrence and removal of VOCs and SVOCs from landfill leachates worldwide.

Understanding the coordination behavior of antibiotics: Take tetracycline as an example

Gaining insight into the occurrence states of residual antibiotics is crucial to demystify their environmental behavior. However, the complexation of heteroatoms functioned on antibiotic molecules to metal ions in the water environment is not fully understood. This study reports that a fluorescence response was unexpectedly triggered by tetracycline (TC) and Al3+, serving as solid evidence to visualize the Al3+-TC coordination reaction. Differential electron absorption spectroscopy shows a quantifiable signal of the redshifted n-π* transition with a coordination reaction, which is also proportional to the fluorescence. The occurrence of Al3+-complexed TC also caused a split in retention time in liquid chromatogram. The TC ligands were re-released in the presence of stronger ligands competing for central Al3+. The complex ratio of Al3+-TC is confirmed to be 1:1 using Job's plot with a stability constant of 1.01 × 106. Quantum chemical computations coupled with Gibbs free energy analysis simulated the formation of octahedral Al3+-TC configuration through a spontaneous bidentate chelation. This study helps convey a broad consensus and opens a new door in the mechanistic study of metal-involved antibiotic transformation process, leading to a better understanding that can ultimately be essential to reach the final goal of alleviating the antibiotic crisis.

Reactive Molecular Dynamics Simulation on Degradation of Tetracycline Antibiotics Treated by Cold Atmospheric Plasmas

The abuse of tetracycline antibiotics (TCs) has caused serious environmental pollution and risks to public health. Degradation of TCs by cold atmospheric plasmas (CAPs) is a high efficiency, low energy consumption and environmentally friendly method. In this study, a reactive molecular dynamics (MD) simulation is applied to study the interactions of reactive oxygen species (ROS) produced in CAPs and TCs (including tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC) and demeclocycline (DMC)). As revealed by the simulation data at the atomic level, the main reaction sites on TCs are the C2 acylamino, the C4 dimethylamine, the C6 methyl group, the C8 site on the benzene ring and the C12a tertiary alcohol. The interaction between ROS and TCs is usually initiated by H-abstraction, followed by the breaking and formation of the crucial chemical bonds, such as the breaking of C-C bonds, C-N bonds and C-O bonds and the formation of C=C bonds and C=O bonds. Due to the different structures of TCs, when the ROS impact OTC, CTC and DMC, some specific reactions are observed, including carbonylation at the C5 site, dechlorination at the C7 site and carbonylation at the C6 site, respectively. Some degradation products obtained from the simulation data have been observed in the experimental measurements. In addition, the dose effects of CAP on TCs by adjusting the number of ROS in the simulation box are also investigated and are consistent with experimental observation. This study explains in detail the interaction mechanisms of degradation of TCs treated by CAPs with the final products after degradation, provides theoretical support for the experimental observation, then suggests optimization to further improve the efficiency of degradation of TCs by CAPs in applications.

Enhanced adsorption and colorimetric detection of tetracycline antibiotics by using functional phosphate/carbonate composite with nanoporous network coverage

This work presents efficient tetracycline (TC) antibiotics adsorption using a functional porous phosphate/carbonate composite (PCC). The PCC was fabricated by anion-exchange of phosphate on the surface of vaterite-phase calcium carbonate particle scaffolds. The PCC, having dense nanoporous network coverage with large surface area and pore volume, exhibited excellent TC adsorption in solution. Its adsorption isotherm fitted well to the Freundlich model, with a maximum adsorption capacity of 118.72 mg/g. The adsorption process was spontaneous, endothermic, and followed pseudo-second-order kinetics. From the XPS analysis, the hydrogen bonding and surface complexation were the key interactions in the process. In addition, a colorimetric TC detection method was developed considering its complexation with phosphate ions, originating from PCC dissolution, during adsorption. The method was used to detect TC in mg/L concentrations in water samples. Thus, the multifunctional PCC exhibited potential for use in TC removal and environmental remediation.

Fe-N co-doped coral-like hollow carbon shell toward boosting peroxymonosulfate activation for efficient degradation of tetracycline: Singlet oxygen-dominated non-radical pathway

Fe-N co-doped coral-like hollow carbon shell (Fe-N-CS) was synthesized via a simply impregnation-pyrolysis method. The Fe-N-CS showed an excellent ability for activating peroxymonosulfate (PMS), which could degrade about 93.74% tetracycline (20 mg/L) in 12 min. The Fe-N-CS/PMS system exhibited a good anti-interference capacity of various pH, inorganic anions, HA and different water qualities. More importantly, the Fe nanoparticles were anchored uniformly in the carbon layer, effectively limiting the metal leaching. The quenching tests and electron spin resonance (ESR) manifested that non-radical singlet oxygen (¹O₂) was the main reactive oxygen species (ROS) for TC degradation. The mechanism study showed that Fe nanoparticles, defect and graphite N played a key role in activating PMS to produce ROS. Moreover, three probable degradation pathways were proposed by using LC-MS measurements. Generally, this work had a new insight for the synthesis of heterogeneous Fe-N-C catalysts in the advanced oxidation process based on PMS.

Efficient coupling of sulfadiazine removal with microalgae lipid production in a membrane photobioreactor

This study explored the feasibility of a coupled system for antibiotic removal and biofuel production through microalgae cultivation. Initial, batch culture experiments demonstrated that sulfadiazine (SDZ) had an inhibitory effect on Chlorella sp. G-9, and 100.0 mg L-1 SDZ completely inhibited its growth. In order to improve SDZ removal efficiency by microalgae, three membrane photobioreactors (MPBRs) with different hydraulic retention times (HRTs) were established for continuous microalgae cultivation. The efficient coupling of SDZ removal and microalgal lipid production was achieved through the gradual increment of influent SDZ concentration from 0 to 100.0 mg L-1. The reduction in SDZ ranged between 57.8 and 89.7%, 54.7-91.7%, and 54.6-93.5% for the MPBRs with HRT of 4 d, 2 d, and 1 d, respectively. Chlorella sp. Was found to tolerate higher concentrations of SDZ in the MPBR system, and the resulting stress from high concentrations of SDZ effectively increased the lipid content of microalgae for potential biodiesel production. With the increase of influent SDZ concentration from 0 to 100.0 mg L-1, the lipid content of microalgae increased by 43.5%. Chlorophyll content, superoxide dismutase activity, and malondialdehyde content of microalgae were also evaluated to explore the mechanism of microalgae tolerance to SDZ stress in MPBR.

Construction of an S-scheme TiOF2/HTiOF3 heterostructures with abundant OVs and OH groups: Performance, kinetics and mechanism insight

Developing efficient photocatalysts is of crucial significance for the development of photocatalysis techniques. In this work, an S-scheme alkaline-washed TiOF₂/HTiOF₃(OHTOF) heterostructures with abundant Oxygen vacancies (Ovs) and OH groups was successfully constructed and used to remedy antibiotic wastewater under simulated sunlight. The generation of HTiOF₃ was induced by g-C₃N₄ regulation. The results displayed that OHTOF15 composite possessed the best photocatalytic performance, which could degrade 94.2% tetracyclinehydrochloride (TCH) at a rate speed constant of 1.077 min^-1 in 2.5 h. The after-alkali-washing process increased the concentration of OH groups and Ovs defects, and greatly enlarged the surface area. The abundant Ovs and OH groups were conducive to the formation of free radicals' and the transport of charge carriers. Compared with the pristine TiOF₂, the absorption sidebands of OHTOF series were greatly red-shifted, which indicated that the increase of OH groups and the etching of the morphology of OHTOF further enhanced its visible-light harvesting ability. Furthermore, the metal cycle of the variable state of Ti⁴⁺/Ti³⁺ in OHTOF15 compensated for the charge balance and promoted the efficient separation of the carriers. Additionally, the apparent quantum efficiency (AQE) of the TCH photodegradation system based on Chemical Oxygen Demand (COD) removal efficiency was calculated to be 0.32%. It was confirmed that the electron transport path in TiOF₂/HTiOF₃ nanocomposites system followed the S-scheme type, which increased the charge carriers' separation rate and maintained a strong redox capacity. This work could provide some enlightenment for the construction of the semiconducting heterojunction and controllable surface defects engineering.

Bamboo cellulose-derived activated carbon aerogel with controllable mesoporous structure as an effective adsorbent for tetracycline hydrochloride

Activated carbon has been widespread applied in the removal of pollutants in wastewater. However, many biomass-derived activated carbon suffer from the challenge of controllable pore size regulation, hindering their efficient adsorption of pollutants. Herein, bamboo-derived activated carbon aerogel (BACA) has been successfully prepared through KOH high-temperature activation of cellulose aerogel which was prepared using cellulose extracted from bamboo. Bamboo cellulose aerogel provides sufficient reaction sites for KOH, which is conducive to the formation of a mass of mesoporous structures on the pore walls of the activated carbon aerogel. The optimal BACA adsorbent shows high specific surface area (2503.80 m²/g), and maximum adsorption capability for tetracycline hydrochloride (TCH) reaches 863.8 mg/g at 30 ℃. The removal efficiencies of TCH are 100% and 98.4% at 40 ℃ when the initial concentrations are 500 and 700 mg/L, respectively. Adsorption kinetics and isotherm indicate that the adsorption of BACA for TCH is monolayer adsorption based on chemical adsorption. Spontaneous and endothermic adsorption processes are proved by adsorption thermodynamic studies. Additionally, coexisting ions have insignificant effect on TCH adsorption, and the BACA sample displays excellent adsorption property for five reuse cycles with a removal efficiency of 80.95%, indicating the outstanding adsorption capacity of BACA in practical application. The excellent adsorption performance provides BACA with a promising perspective to remove TCH from wastewater, and the prepared method of BACA can be widely extended to other biomass materials.

ZnCo2O4/g-C3N4/Cu nanocomposite as a new efficient and recyclable heterogeneous photocatalyst with enhanced photocatalytic activity towards the metronidazole degradation under the solar light irradiation

In this study, ZnCo₂O₄/g-C₃N₄/Cu is synthesized as a new and highly effectual solar light-driven heterogeneous photocatalyst. The prepared photocatalyst is characterized using FT-IR, XRD, XPS, DRS, FESEM, TEM, EDS, and elemental mapping techniques. The performance of ZnCo₂O₄/g-C₃N₄/Cu is studied towards the metronidazole (MNZ) degradation under solar light irradiation. The kinetics of MNZ degradation and efficacy of the operational parameters comprising the initial MNZ amount (10-30 mg L^-1), photocatalyst dosage (0.005-0.05 g L^-1), pH (3-11), and contact time (5-30 min) on the MNZ degradation process are investigated. Surprisingly, the ZnCo₂O₄/g-C₃N₄/Cu nanocomposite presents a privileged photocatalytic performance towards the MNZ degradation under solar light irradiation. The enhanced photocatalytic activity of this photocatalyst can be ascribed to the synergistic optical effects of ZnCo₂O₄, g-C₃N₄, and Cu. The value of band gap energy for ZnCo₂O₄/g-C₃N₄/Cu is estimated to be 2.3 eV based on the Tauc plot of (αhν)² vs. hν. The radical quenching experiments confirm that the superoxide radicals and holes are the principal active species in the photocatalytic degradation of MNZ, whereas the hydroxyl radicals have no major role in such degradation. The as-prepared photocatalyst is simply isolated and recycled for at least eight runs without noticeable loss of the efficiency. Using the natural sunlight source, applying a very low amount of the photocatalyst, neutrality of the reaction medium, short reaction time, high efficiency of the degradation procedure, utilizing air as the oxidant, low operational costs, and easy to recover and reuse of the photocatalyst are the significant highlights of the present method. It is supposed that the current investigation can be a step forward in the representation of an efficacious photocatalytic system in the treatment of a wide range of contaminated aquatic environments.

Adsorption of chlortetracycline in aquaculture wastewater by lanthanum modified multi-walled carbon nanotubes

The lanthanum modified multi-walled carbon nanotubes (La-CNTs) prepared by an impregnation method were investigated for the adsorption of chlortetracycline (CTC) in aquaculture wastewater. The adsorbents were characterized by SEM, EDS, XRD and BET. The effects of some factors including La-containing impregnant concentration, adsorbent dosage, CTC adsorbate concentration, adsorption time, pH of the adsorbate solution and additional ions on the CTC adsorption by La-CNTs were investigated in detail, and the optimal adsorption conditions were determined. The adsorption kinetics obeyed the quasi-second-order kinetic model. The adsorption isotherms obeyed the Langmuir model and the fitted maximum capacity of La-CNTs for CTC adsorption was 55.3 mg/g.

Sugarcane Bagasse Ash as a Catalyst Support for Facile and Highly Scalable Preparation of Magnetic Fenton Catalysts for Ultra-Highly Efficient Removal of Tetracycline

Sugarcane bagasse ash, which is waste from the combustion process of bagasse for electricity generation, was utilized as received as a catalyst support to prepare the magnetic sugarcane bagasse ash (MBGA) with different iron-to-ash ratios using a simple co-precipitation method, and the effects of NaOH and iron loadings on the physicochemical properties of the catalyst were investigated using various intensive characterization techniques. In addition, the catalyst was used with a low amount of H2O2 for the catalytic degradation of a high concentration of tetracycline (800 mg/L) via a Fenton system. The catalyst exhibited excellent degradation activity of 90.43% removal with good magnetic properties and high stabilities and retained good efficiency after four cycles with NaOH as the eluent. Moreover, the hydroxyl radical on the surface of catalyst played a major role in the degradation of TC, and carbon-silica surface of bagasse ash significantly improved the efficiencies. The results indicated that the MBGA catalyst shows the potential to be highly scalable for a practical application, with high performance in the heterogeneous Fenton system.

New insight into degradation of chloramphenicol using a nanoporous Pd/Co3O4cathode: characterization and pathways analysis

The growing chloramphenicol (CAP) in wastewater brought a serious threat to the activity of activated sludge and the spread of antibiotics resistance bacteria. In this study, a highly ordered nanoporous Co₃O₄layer on Co foil through anodization was prepared as cathode for nitro-group reduction and electrodeposited with Pd particles for dechlorination to reduce CAP completely. After 3 h treatment, almost 100% of CAP was reduced. Co²⁺ions in Co₃O₄served as catalytic sites for electrons transfer to CAP through a redox circle Co²⁺-Co³⁺-Co²⁺, which triggered nitro-group reduction at first. With the presence of Pd particles, more atomic H* were generated for dechlorination, which increased 22% of reduction efficiency after 3 h treatment. Therefore, a better capacity was achieved by Pd/Co₃O₄cathode (K = 0.0245 min^-1,Kis reaction constant) than by other cathodes such as Fe/Co₃O₄(K = 0.0182 min^-1), Cu/Co₃O₄(K = 0.0164 min^-1), and pure Co₃O₄(K = 0.0106 min^-1). From the proposed reaction pathway, the ultimate product was carbonyl-reduced AM (dechlorinated aromatic amine product of CAP) without antibacterial activity, which demonstrated this cathodic technology was a feasible way for wastewater pre-treatment.

Efficient pH-universal degradation of antibiotic tetracycline via Co2P decorated Neosinocalamus affinis biochar

Considering the complexity of traditional cobalt phosphide (Co₂P) loaded biochar synthesis research on a simple and efficient synthesis method has practical significance. In this study, after phosphoric acid activation, Neosinocalamus affinis biochar (NAB) and nanoplate Co₃O₄ quickly formed a Co₂P-NAB composite material with high Co₂P crystallinity and was uniformly dispersed on the surface of NAB in a microwave reactor. Co₂P-NAB has an excellent catalytic degradation effect in the activation of peroxymonosulfate (PMS) to degrade tetracycline (TC). The optimal TC degradation efficiency was achieved with the addition of 50 mg L^-1 TC concentration, 0.2 g L^-1 catalysts, 0.406 mM PMS and pH = 6.02. In addition, according to the pseudo-first-order reaction rate constant calculation, the composite of Co₂P-NAB and PMS the synergy efficiency is 81.55 %. Compared with Co₂P-NAB (10.83 %) and PMS (7.62 %) alone, the Co₂P-NAB/PMS system has a significant promotion effect on the degradation of TC molecules. Additionally, the Co₂P-NAB/PMS system had a TC mineralization rate of 68 % in 30 min. Furthermore, after a series of characterization, detection and analysis, and influencing factor experiments, we proposed a potential mechanism for the Co₂P-NAB/PMS reaction system to degrade TC and found that singlet oxygen (¹O₂) plays an essential role in the non-radical degradation process. Finally, according to the liquid chromatography-mass spectrometry (LC-MS) detection of TC degradation intermediates, a possible degradation route was proposed. Therefore, this work uses microwave technology to present a novel and simple synthesis method for transition metal phosphides, which provides potential application value for the treatment of actual wastewater with heterogeneous catalysts.

Membrane bioreactors for hospital wastewater treatment: recent advancements in membranes and processes

Discharged hospital wastewater contains various pathogenic microorganisms, antibiotic groups, toxic organic compounds, radioactive elements, and ionic pollutants. These contaminants harm the environment and human health causing the spread of disease. Thus, effective treatment of hospital wastewater is an urgent task for sustainable development. Membranes, with controllable porous and nonporous structures, have been rapidly developed for molecular separations. In particular, membrane bioreactor (MBR) technology demonstrated high removal efficiency toward organic compounds and low waste sludge production. To further enhance the separation efficiency and achieve material recovery from hospital waste streams, novel concepts of MBRs and their applications are rapidly evolved through hybridizing novel membranes (non hydrophilic ultrafiltration/microfiltration) into the MBR units (hybrid MBRs) or the MBR as a pretreatment step and integrating other membrane processes as subsequent secondary purification step (integrated MBR-membrane systems). However, there is a lack of reviews on the latest advancement in MBR technologies for hospital wastewater treatment, and analysis on its major challenges and future trends. This review started with an overview of main pollutants in common hospital waste-water, followed by an understanding on the key performance indicators/criteria in MBR membranes (i.e., solute selectivity) and processes (e.g., fouling). Then, an in-depth analysis was provided into the recent development of hybrid MBR and integrated MBR-membrane system concepts, and applications correlated with wastewater sources, with a particular focus on hospital wastewaters. It is anticipated that this review will shed light on the knowledge gaps in the field, highlighting the potential contribution of hybrid MBRs and integrated MBR-membrane systems toward global epidemic prevention.

Optimization of media composition for enhancing tetracycline degradation by Trichosporon mycotoxinivorans XPY-10 using response surface methodology

The objective of the study was to improve tetracycline degradation efficiency by Trichosporon mycotoxinivorans XPY-10 using statistical experimental designs. Different culture conditions (FeSO₄, pH and glucose) were optimized for tetracycline biodegradation and the mutual interactions between these three variables were analysed using Box-Behnken design (BBD) and response surface methodology (RSM). The results showed that the empirical model was suitable for experimental data, and the maximum tetracycline degradation efficiency by XPY-10 was 95.18% under the optimum conditions of 0.02% of FeSO₄, pH 7.83 and 0.28% of glucose, which was further verified by experiments. This study indicated the excellent ability of XPY-10 in degrading tetracycline and theoretical support for the follow-up practice to remediate tetracycline contaminated environment.

Elimination of cephalexin and doxycycline under low frequency ultrasound

Cephalexin (CPX) and doxycycline (DOX) are two of the most used antibiotics to treat bacterial infections in human medicine, veterinary practices, animal husbandry, agriculture, aquaculture, among others. Nevertheless, due to their excessive consumption and incomplete absorption during their metabolization, they have been detected in different environmental matrices and the effluents of wastewater treatment plants, which reflects that conventional water treatment methods are not enough to eliminate this type of compounds. This paper presents the main results about the removal of the antibiotics CPX and DOX under low frequency (40 kHz) ultrasonic radiation (US). The effects of operational parameters such as the solution initial pH and the applied US power were assessed considering the response surface methodology and a face centered, central composite experimental design. The results indicated that evaluated operational factors significantly affect the pollutants elimination and that US technology is able to remove them completely. In addition, in terms of mineralization, experimental results showed a reduction of the organic carbon present in the solutions and a significant increase of ions (nitrates and sulfates) concentration, suggesting that part of the organic matter was transformed into CO₂, H₂O and inorganic species. Finally, results regarding the samples toxicity indicated that ultrasonic treatment could promote a significant reduction in this parameter, and the potential negative effect associated to CPX and DOX presence in water bodies.

Effect of UVC and UVA Photocatalytic Processes on Tetracycline Removal Using CuS-Coated Magnetic Activated Carbon Nanocomposite: A Comparative Study

In this study, we synthesized a novel MAC nanocomposite using almond’s green hull coated with CuS. The whole set of experiments have been conducted inside a batch (discontinuous reactor system) at room temperature. The effectiveness of different parameters in tetracycline removal pH (3, 5, 7, and 9), pollutant concentration (5–100 mg/L), nanocomposite dosage (0.025–1 g/L), and contact time (5–60 min) using newly synthesized nanocomposite were investigated. Based on the results, in the optimal conditions of pH = 9, nanocomposite dosage of 1 g/L, pollutant concentration of 20 mg/L, contact time of 60 min, and room temperature, 95% removal efficiency was obtained. In MAC/CuS/UV_C process, the removal of COD and TOC were 76.89% and 566.84% respectively meanwhile, these values in MAC/CuS/UV_A process were 74.19% and 62.11%, respectively. The results of nanocomposite stability and magnetic recovery illustrated that the removal efficiency was reduced by 1.5% in the presence of UV_C and 5% in the presence of UV_A lights during all six cycles. Therefore, this nanocomposite was highly capable of recycling and reuse. It can be concluded that considering the high potential of the synthesized nanocomposite, the photocatalytic efficiency of the MAC/CuS/UV_C process in tetracycline synthesis was higher than MAC/CuS/UV_A process.

Advances in micro interfacial phenomena of adsorptive micellar flocculation: Principles and application for water treatment

Among various aqua remediation technologies, separation aims at cleaning pollutants by isolating them despite their destruction; solutes can also be recovered after the process. Adsorptive micellar flocculation (AMF) has been known as an important surfactant-based technique to separate poorly water-soluble hazardous pollutants from aqua media as an efficient and energy-intensive replacement for other surfactant-based techniques, as such AMF should be known. AMF is based on the partitioning of solutes gradient from bulk solution into the nanosized smart anionic surfactant micelle followed by flocculation. However, unlike coagulation/flocculation or adsorption, AMF is not viable for the production of drinking water in water utilities due to the loss of surfactant monomers. Unfortunately, it can be used as a reservoir or for the recycling/recovery of organic pollutants (intermediates) (ions, organics/bioactive, dyes, etc.), even at high concentrations. The performance of AMF depends on various parameters, and this review briefly summarizes the existing researches on different pollutants removal by AMF and material recovery/recycling. This includes operating condition factors (surfactants, flocculants, surfactant-flocculant or surfactant-pollutant concentration ratio, and water conditions chemistry). Because varieties of micro interfacial phenomena other than physical interactions occur in a versatile micellar environment in the AMF process, emphases are given to adsorptive oxidation, micellar catalysis, selectivity. Furthermore, for the first time, this review gives an overview of understanding the state-of-the-art multifunctional nano amphiphile-based AMF that behaves mimetic to aquatic organisms in the process of pollutant removal. The efficiency of AMF, including recycling concentrated solution without noticeable deterioration, as an auxiliary resource/income for the next cycle, signifies economic viability, versatility, and manifold applications in aqua remediation. Significance, ways to achieve enhanced process efficiency, as well as challenges and future opportunities in wastewater treatment, are also highlighted.

Controlled Synthesis of CuS and Cu9S5 and Their Application in the Photocatalytic Mineralization of Tetracycline

Pure-phase Cu2−xS (x = 1, 0.2) nanoparticles have been synthesized by the thermal decomposition of copper(II) dithiocarbamate as a single-source precursor in oleylamine as a capping agent. The compositions of the Cu2−xS nanocrystals varied from CuS (covellite) through the mixture of phases (CuS and Cu7.2S4) to Cu9S5 (digenite) by simply varying the temperature of synthesis. The crystallinity and morphology of the copper sulfides were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which showed pure phases at low (120 °C) and high (220 °C) temperatures and a mixture of phases at intermediate temperatures (150 and 180 °C). Covellite was of a spherical morphology, while digenite was rod shaped. The optical properties of these nanocrystals were characterized by UV−vis–NIR and photoluminescence spectroscopies. Both samples had very similar absorption spectra but distinguishable fluorescence properties and exhibited a blue shift in their band gap energies compared to bulk Cu2−xS. The pure phases were used as catalysts for the photocatalytic degradation of tetracycline (TC) under visible-light irradiation. The results demonstrated that the photocatalytic activity of the digenite phase exhibited higher catalytic degradation of 98.5% compared to the covellite phase, which showed 88% degradation within the 120 min reaction time using 80 mg of the catalysts. The higher degradation efficiency achieved with the digenite phase was attributed to its higher absorption of the visible light compared to covellite.

The electro-oxidation of tetracycline hydrochloride in commercial DSA® modified by electrodeposited platinum

Tetracycline hydrochloride (TCH) electro-oxidation by commercial DSA® and commercial DSA® modified by platinum electrodeposition was evaluated. The electrodeposition was carried out at constant potential (E = - 0.73 V vs RHE) in different times (1200, 2400, and 4800 s). Scanning electron microscopy (SEM) images show that Pt electrodeposits have elongated shape particle forming a uniform surface, and energy dispersive spectroscopy (EDS) data confirms the presence of Pt on the surface. The electrochemical characterization by cyclic voltammetry showed an increase of the electrochemically active area (E_AA) in function of the Pt electrodeposition time. The electro-oxidation of the TCH 0.45 mmol L^-1 in H₂SO₄ 0.1 mol L^-1 solution was evaluated according to the applied current densities (j = 25, 50, 100 mA cm^-2). Both the amount of platinum deposited and j showed a slight improvement in the efficiency of TCH removal, reaching 97.2% of TCH removal to DSA®/Pt₄₈₀₀ and 100 mA cm^-2. The TCH mineralization (TOC removal), the percentage of mineralization current efficiency (MCE%), and energy consumption were 15.8%, 0.2649%, and 7.4138 kWh (g TOC)^-1, respectively. The DSA®/Pt electrodes showed higher stability to TCH electro-oxidation, indicating to be a promising material for the electro-oxidation of organic pollutants.

Antibiotics removal from aquatic environments: adsorption of enrofloxacin, trimethoprim, sulfadiazine, and amoxicillin on vegetal powdered activated carbon

This study addresses the growing concern about the high levels of antibiotics in water, outlining an alternative for their removal. The adsorption of four representative antibiotics from commonly used families (fluoroquinolones, β-lactams, trimethoprim, and sulfonamides) was performed over vegetal powdered activated carbon. The evolution of the adsorption was studied during 60 min for different initial antibiotic concentrations, not only individually but also simultaneously to determine competitive adsorption. Moreover, this research studied the adsorption isotherms and kinetics of the process, as well as the pH influence; FTIR of the activated carbon before and after adsorption was carried out. Trimethoprim and sulfadiazine showed more affinity for the adsorbent than amoxicillin and enrofloxacin. This trend might be attributed to their structure, capable of stablishing stronger π-π interactions with the adsorbent, which showed high affinity for the active sites of the adsorbent via FTIR. In addition, the sorption isotherms of trimethoprim followed a Langmuir type isotherm, amoxicillin followed a Freundlich type isotherm, and enrofloxacin and sulfadiazine followed both. The antibiotics followed pseudo-second-order kinetics. Sulfadiazine and amoxicillin gave better performances in acidic conditions. By contrast, the sorption of trimethoprim was favored in basic environments. Variations of pH had a negligible effect on the removal of enrofloxacin.

Optimizing microwave-assisted production of waste-based activated carbons for the removal of antibiotics from water

This work aimed at the microwave-assisted production of activated carbon (AC) from primary paper mill sludge (PS) for the adsorption of antibiotics from water. Production conditions, namely pyrolysis temperature, pyrolysis time and activating agent (KOH):PS ratio, were optimized as a function of product yield, specific surface area (S_BET), total organic carbon (TOC) content and adsorptive removal percentage of two target antibiotics (amoxicillin (AMX) and sulfamethoxazole (SMX)). Under the optimized conditions (pyrolysis at 800 °C during 20 min and a KOH:PS ratio of 1:5), a microporous AC (MW800-20-1:5, with S_BET = 1196 m² g^-1, TOC = 56.2% and removal of AMX and SMX = 85% and 72%, respectively) was produced and selected for further kinetic and equilibrium adsorption studies. The obtained results were properly described by the Elovich reaction-based kinetic model and the Langmuir equilibrium isotherm, with maximum adsorption capacities of 204 ± 5 mg g^-1 and 217 ± 8 mg g^-1 for AMX and SMX, respectively. Considering the satisfactory comparison of these results with the performance of commercial and alternative AC produced by conventional pyrolysis, this work demonstrated the feasibility of the microwave-assisted production of environmentally and energetically sustainable waste-based AC to be applied in the efficient removal of antibiotics from water.

Ratiometric ultrasensitive optical chemisensor film based antibiotic drug for Al(III) and Cu(II) detection

Herein, we developed and designed a novel ratiometric optical chemisensor film for determining Al(III) and Cu(II) in low concentration ranges. The chemisensor film consists of (a) antibacterial drug Ciprofloxacin (CPFX) [1-cyclopropyl-6-fluoro1,4-dihydro-4-oxo-7-(piperaziny-l-yl) quinolone-3carboxylic acid] and (b) a reference dye 5,10,15,20- tetrakis (pentafluorophenyl) porphyrin (TFPP) in a polyvinyl chloride (PVC) matrix. PVC was applied as a homogeneous system for mixing CPFX and TFPP. The emission intensity of the CPFX in the PVC matrix varies depending on the concentrations of the Al(III) and Cu(II) ions. When the sensor film is immersed in different Al(III) concentrations, a significant fluorescence enhancement of the CPFX at (427 nm) is observed. Furthermore, the fluorescence intensity of the red emission of the TFPP dye at (644 nm) does not alter. However, in the presence of Cu(II) ions, a considerable emission quenching of the CPFX peak at (427 nm) is observed. PVC provides a great permeability and penetration facilities of dissolved ions that make the sensor film sensitive to Al(III) or Cu(II) changes outside the matrix. The film displays immense sensitivity depending on their distinctive optical characteristics of CPFX and detection capabilities within a low detection limit LOD for Al(III) and Cu(II). The LOD values were estimated to be 2.05 x 10^-7 M and 1.04 x 10^-7 M respectively with a relative standard deviation RSD_r (1%, n=3). Density functional theory (DFT) and the time-dependent DFT (TDDFT) theoretical calculations were performed to study Cu(II) and Al(III) complexation structures and their electronic properties in solution and in the sensor film. The interference of the chemisensor film was examined using different cations and the chemisensor provides significant selectivity. We develop a new ratiometric chemisensor based on PVC polymer film for Al(III) and Cu(II) detection.

Removal of tetracyclines from aqueous solutions by electrocoagulation/pecan nutshell coupling processes: synergistic effect and mechanism

The present work compared electrocoagulation (EC)/pecan shell (PS) coupling process with a simple electrocoagulation (EC) process for the removal of tetracyclines (TCs). The results indicated that the addition of appropriate PS could lead to the enhancement of the removal efficiency and decrease of operating time via synergistic influence, including conventional EC process, biomass materials adsorption, charge neutralization and coordination adsorption. The ideal condition for the coupling process was 2.5 mA/cm² for current density and 3 cm for plate spacing. Based on the optimum condition, when the dosage of PS was 5 g/L, the initial concentration of tetracycline hydrochloride (TC), oxytetracycline hydrochloride (OTC) and chlortetracycline hydrochloride (CTC) was 250 mg/L, the removal rate of PS was 55.90%, 45.10% and 14.98% higher than those of EC process after 40 min treatment. In addition, compared to conventional EC process, the unit energy demand (UED) decreased by 49.62%, 53.2 4% and 26.35% and the unit electrode material demand (UEMD) decreased by 49.80%, 85.65% and 44.37%, respectively, which means more energy conservation and environmental protection.

Synergic removal of tetracycline using hydrophilic three-dimensional nitrogen-doped porous carbon embedded with copper oxide nanoparticles by coupling adsorption and photocatalytic oxidation processes

Adsorption and photocatalytic oxidation are promising technologies for eliminating antibiotics (e.g. tetracycline) in aquatic environments. However, traditional powdery nanomaterials are limited by drawbacks of difficult separation and lack of synergistic function, which do not conform to the practical demand. Herein, we developed a simple one-step gelation-pyrolysis route to fabricate hydrophilic three-dimensional (3D) porous photocatalytic adsorbent, in which CuO nanoparticles are uniformly and firmly embedded in nitrogen-doped (N-doped) porous carbon frameworks. The obtained N-doped carbon/CuO bulky composites exhibited excellent ability to adsorb tetracycline hydrochloride (TC), which was subsequently photo-oxidized under visible light. Their hydrophilic nature favors the adsorption processes toward TC, with a maximum adsorption capacity reaching 25.03 mg∙g^-1. In addition, >94.4% of TC molecules could be photo-degraded in 4 h with good cycling efficiency after three consecutive tests. Finally, a reaction scheme for removal process of TC was proposed. The obtained 3D porous N-doped carbon/CuO nanocomposites show great promise for efficient removal of antibiotics in aqueous solution by synergistically utilizing adsorption and photocatalytic oxidation processes.

Preparation of pyramidal SnO/CeO2 nano-heterojunctions with enhanced photocatalytic activity for degradation of tetracycline

Pyramidal SnO/CeO₂ nano-heterojunction photocatalysts were successfully synthesized via a facile hydrothermal method. The structural characterization was investigated by using common characterization tools. The content of SnO affected the morphology and photocatalytic performance of the SnO/CeO₂ nano-heterojunctions. With the increase of the SnO content, the morphology of the samples changed from a spherical structure to a pyramidal structure. The photocurrent of the SnO/CeO₂ (1:6) sample was about 36 times that of pure CeO₂. With SnO/CeO₂ (1:6) as the photocatalyst, the degradation rate of tetracycline (TC) was 99% within 140 min under visible light and after five cyclic tests the photocatalytic efficiency of TC remained at 98%, which suggests that the SnO/CeO₂ (1:6) nano-heterojunction had a high photocatalytic efficiency and stable photocatalytic performance. These results indicate that SnO/CeO₂ (1:6) nano-heterojunction possesses broad prospects for industrial application.