Effective treatment of dye wastewater via positively charged TETA-MWCNT/PES hybrid nanofiltration membranes

MOF@MXene nanocomposite as a novel modifier to extend the application of PES mixed-matrix nanofiltration membranes for water treatment

MXene-based membranes, as a type of modified membrane, have unique structures that attract attention for water treatment but suffer from low water flux. To address this, MXene was manipulated with UiO-66-NH2 nanoparticles to create UiO-66-NH2@MXene 2D-nanocomposites for the modification of the PES membrane. Herein, we synthesized a novel modified MXene-based PES membrane. The MXene, UiO-66-NH2, and UiO-66-NH2@MXene were assessed using the Fourier transform infrared, X-ray diffraction pattern, X-ray photoelectron spectroscopy, and zeta potential analysis. Field emission scanning electron microscopy was used to evaluate the MXene-based materials and prepared membranes, and the surface topography of the fabricated membranes was studied using atomic force microscopy. The membrane modified by 0.25 wt% of modifier was able to not only remove 72% and 81% of methylene blue and crystal violet cationic dyes, but also recorded more than 91% rejections for methyl blue, methyl orange, acid fusion, and Congo red anionic dyes. Using the same membrane, salt rejections of 91%, 87%, 79%, and 62% were achieved for Na2SO4, MgSO4, MgCl2, and NaCl, respectively. Water flux was also increased by more than 4 times in the membrane modified with 0.25 wt% of the novel nanocomposite modifier, and the water contact angle of the membrane with 0.5 wt% decreased from 65° to 38° compared to the pristine PES membrane. Besides, the anti-fouling properties were exceptionally improved in the membranes modified by the introduced UiO-66-NH2@MXene nanocomposite modifier.

Reconstructing Electrically Conductive Nanofiltration Membranes with an Aniline-Functionalized Carbon Nanotubes Interlayer for Highly Effective Toxic Organic Treatment

Conductive nanofiltration (CNF) membranes hold great promise for removing small organic pollutants from water through enhanced Donnan exclusion and electrocatalytic degradation. However, current CNF membranes face limitations in conductivity, structural stability, and nanochannel control strategies. This work addresses these challenges by introducing aniline-functionalized carbon nanotubes (NH2-CNTs) as an interlayer. NH2-CNTs enhance the dispersibility and adhesion of pristine carbon nanotubes, leading to a more conductive and stable composite nanofiltration membrane. The redesigned NH2-CNTs interlayered conductive nanofiltration (NICNF) membrane exhibits a 10-fold increase in conductivity and a high response degree (80%) with excellent cyclic stability, surpassing existing CNF membranes. The synergistic effects of enhanced Donnan exclusion, voltage switching, and electrocatalysis enable the NICNF membrane to achieve selective recovery of mixed dyes, 98.97% removal of residual wastewater toxicity, and a 5.2-fold increase in permeance compared to the commercial NF270 membrane. This research paves the way for next-generation multifunctional membranes capable of the efficient recovery and degradation of toxic organic pollutants in wastewater.

Carbon nanotubes buckypapers: A new frontier in wastewater treatment technology

Occurrence of contaminants in water is one of the major global concerns humanity is still facing today: most of them are extremely toxic and dangerous for human health, obliging their removal for a proper and correct process of sanitation. Among wastewater treatment technologies, in the view of development of sustainable and environmentally friendly processes, membrane adsorption has proved to be a fast and simple method in the removal of pollutants, offering great contaminants recovery percentages, fast adsorbent regeneration and recycle, and easy scale-up. Due to their large surface area and tunable chemistry, carbon nanotubes (CNTs)-based materials revealed to be extraordinary adsorbents, exceeding by far performances of ordinary organic and inorganic membranes such as polyethersulfone, polyvinylidene fluoride, polytetrafluoroethylene, ceramics, currently employed in membrane technologies for wastewater treatment. In consideration of this, the review aims to summarize recent developments in the field of carbon nanotubes-based materials for pollutants recovery from water through adsorption processes. After a brief introduction concerning what adsorption phenomenon is and how it is performed and governed by using carbon nanotubes-based materials, the review discusses into detail the employment of three common typologies of CNTs-based materials (CNTs powders, CNTs-doped polymeric membranes and CNTs membranes) in adsorption process for the removal of water pollutants. Particularly focus will be devoted on the emergent category of self-standing CNTs membranes (buckypapers), made entirely of carbon nanotubes, exhibiting superior performances than CNTs and CNTs-doped polymeric membranes in terms of preparation strategy, recovery percentages of pollutants and regeneration possibilities. The extremely encouraging results presented in this review aim to support and pave the way to the introduction of alternative and more efficient pathways in wastewater treatment technologies to contrast the problem of water pollution.

Ionic Hyperbranched Poly(amido-amine)-Incorporated Nanofiltration Membranes for High-Efficiency Dye Desalination

High-efficiency dye desalination is crucial in the textile industry, considering its importance for human health, safe aquatic ecological systems, and resource recovery. In order to solve the problem of effective separation of univalent salt and ionic dye under the condition of high salt, ionic hyperbranched poly(amido-amine) (HBPs) were synthesized based on a simple and scalable one-step polycondensation method and then incorporated into the polyamide (PA) selective layers to construct charged nanochannels through interfacial polymerization (IP) on the surface of a polyvinyl chloride ultrafiltration (PVC-UF) hollow fiber membrane. Both the internal nanopores of HBPs (internal nanochannels) and the interfacial voids between HBPs and the PA matrix (external nanochannels) can be regarded as a fast water molecule transport pathway, while the terminal ionic groups of ionic HBPs endow the nanochannels with charge characteristics for improving ionic dye/salt selectivities. The permeate fluxes and dye/salt selectivities of HBP-TAC/PIP (57.3 L m-2 h-1 and rhodamine B (RB)/NaCl selectivity of 224.0) and HBP-PS/PIP (63.7 L m-2 h-1 and lemon yellow (LY)/NaCl selectivity of 664.0) membranes under 0.4 MPa operation pressure are much higher than PIP-only and HBP-NH2/PIP membranes. At the same time, this project also studied the membrane desalination process in a simulated high-salinity dye/salt mixture system to provide a theoretical basis and technical support for the actual dye desalination process.

Development of Support Layers and Their Impact on the Performance of Thin Film Composite Membranes (TFC) for Water Treatment

Thin-film composite (TFC) membranes have gained significant attention as an appealing membrane technology due to their reversible fouling and potential cost-effectiveness. Previous studies have predominantly focused on improving the selective layers to enhance membrane performance. However, the importance of improving the support layers has been increasingly recognized. Therefore, in this review, preparation methods for the support layer, including the traditional phase inversion method and the electrospinning (ES) method, as well as the construction methods for the support layer with a polyamide (PA) layer, are analyzed. Furthermore, the effect of the support layers on the performance of the TFC membrane is presented. This review aims to encourage the exploration of suitable support membranes to enhance the performance of TFC membranes and extend their future applications.

A novel synergistic effect of TiO2 and ZnO incorporation in PES-based thin-film nanocomposite nanofiltration membrane for treatment of textile wastewater

A novel synergistic effect of TiO₂ and ZnO incorporation in the PES-based thin-film nanocomposite nanofiltration membranes was developed for the treatment of common effluent treatment plant (CETP) textile wastewater. PES@TiO₂ membranes were developed by phase inversion via the immersion precipitation method followed by the addition of zinc oxide nanoparticles prepared by the rapid microwave-assisted hydrothermal process via interfacial polymerization. p-Phenylenediamine was used as a monomer for the IP process that was coated on the PES@TiO₂ support layer. Various techniques have been applied to characterize the developed thin-film nanocomposite membranes such as Fourier transform infrared (FTIR) microscopy, field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), and contact angle measurement to examine the presence of vibrational modes, surface morphology, the crystal structure of nanoparticles, and hydrophilicity of the membrane, respectively. Membrane properties include porosity, salt rejection, mean pore radius, pure water flux, and industrial effluent rejection efficiency that were studied. The thin-film nanocomposite membrane T5-PES@TiO₂(2%)-ZnO(0.3%) was prepared with a combination of 17 wt% PES, 78 wt% DMF, 3 wt% PVP K30, 2% TiO₂, 2.5 wt% PPD, 0.3 wt% ZnO, and 1.0 wt% TMC that exhibited high water permeability, porosity, higher industrial effluent rejection, and salt rejection efficiency compared to the neat PES membrane.

Recent trends and advancements in nanoporous membranes for water purification

When it comes to electrocatalysis, the creation of nanodevices, the research of energy and the environment, and diagnostics, nanoporous materials are an asset. Nanoporous membranes, which can be used to filter water, have recently been the subject of new research and are summarized in this review. These membranes are used to remove salts and metallic ions from the water following an analysis of several nanoporous membrane types and production procedures. Demonstrations and discussions of these membrane systems are then conducted. Nanoporous membranes can be used to filter water, according to the conclusions of this study, which will help readers better grasp how they work. As a result, novel water purification nanoporous compounds that are easy to manufacture, inexpensive, and effective will be developed. Merits and demerits of nanoporous membrane for water treatment and its advancements in purification were discussed.

Modification of polyethersulfone membranes by Polyethyleneimine (PEI) grafted Silica nanoparticles and their application for textile wastewater treatment

In the current work, a novel nanocomposite membrane for wastewater treatment applications has been synthesized. A hydrophilic nature nanoadditive comprised grafting polyethylenimine (PEI) molecules onto the surfaces of silica nanoparticles (SiO₂ NPs) was synthesized then entrapped within a polyethersulfone polymeric matrix at disparate ratios via the classical phase inversion technique. A series of experimental tools were employed to probe the influence of SiO₂-PEI on the surface topography and morphological changes, hydrophilicity, porosity, surface chemistry as well as permeation and dyes retention characteristics of the new nanocomposite. Upon increasing the nanoadditives content (up to 0.7 wt. % SiO₂- PEI), clear cross-sectional changes were depicted along with a noticeable decline in the water contact angle by 29.7%. Performance evaluation measurements against synthetic dye solutions were disclosed explicit enhancement in both; retention and permeation characteristics of the nanocomposite membranes. Besides, prolonged permeation test has maintained high flux stability against real textile wastewater; implying better resistance and self-cleaning characteristics have been achieved.

Preparation and Characterization of Polymer Membranes Impregnated with Carbon Nanotubes for Olive Mill Wastewater

In this study, polymer membrane(s) impregnated with carbon nanotubes (CNTs) were developed, characterized and evaluated for removing phenolic compounds from olive mill wastewater; thus, protecting the environment and public health. Polyethersulfone/functionalized, multi-walled carbon nanotube (PES/fCNTs) membranes were synthesized via the phase inversion method using PES and acid-treated CNTs. The prepared membranes were then characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and contact angle. Results obtained from this study indicate a more hydrophilic surface for the prepared PES/fCNTs membranes, with a higher pure water flux compared to the polyethersulfone (PES) membranes. In addition, the amount of fCNTs in the membranes was found to be the most significant factor affecting the morphology and water flux of the membranes. The PES/fCNTs membranes at 1 bar with 0 wt.% and 1 wt.% of CNTs showed water flux of 37.8 and 69.71 kg/h.m², respectively. In addition, PES/fCNTs membranes with 0.5 wt.% fCNTs showed the highest total phenol content removal of 74%.

Review of adsorption-membrane hybrid systems for water and wastewater treatment

Adsorption is an effective method for the removal of inorganic and organic contaminants and has been commonly used as a pretreatment method to improve contaminant removal and control flux during membrane filtration. Over the last two decades, many researchers have reported the use of hybrid systems comprising various adsorbents and different types of membranes, such as nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF) membranes, to remove contaminants from water. However, a comprehensive evaluation of the removal mechanisms and effects of the operating conditions on the transport of contaminants through hybrid systems comprising various adsorbents and NF, UF, or MF membranes has not been performed to date. Therefore, a systematic review of contaminant removal using adsorption-membrane hybrid systems is critical, because the transport of inorganic and organic contaminants via the hybrid systems is considerably affected by the contaminant properties, water quality parameters, and adsorbent/membrane physicochemical properties. Herein, we provide a comprehensive summary of the most recent studies on adsorption-NF/UF/MF membrane systems using various adsorbents and membranes for contaminant removal from water and wastewater and highlight the future research directions to address the current knowledge gap.

Removal of Humic Acid Using 3-Methacryloxypropyl Trimethoxysilane Functionalized MWCNT Loaded TiO2/PES Hybrid Membrane

In the present work, a highly efficient mixed matrix membrane (MMM) for humic acid (HA) removal was developed. Multiwalled carbon nanotubes (MWCNTs) were functionalized in the presence of 3-methacryloxypropyl trimethoxysilane using the co-condensation method and were subsequently loaded with TiO2 (prepared via the sol-gel route). The as-prepared material was then incorporated into a PES polymer solution to prepare a fMWCNT-TiO2/PES hybrid membrane via non-solvent induced phase inversion. The microstructure of the membrane was characterized using Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, water contact angle, thickness, porosity, and pore size. The fMWCNT-TiO2/PES hybrid membrane was tested for the removal of HA and antifouling performance. The results show that the surface hydrophilicity of the membranes was greatly improved upon the addition of the fMWCNT-TiO2 particles. The results show that 92% of HA was effectively removed after 1 h of filtration. In comparison with pristine membrane, the incorporation of fMWCNT-TiO2 nanoparticles led to enhanced pure water flux (99.05 L/m2 h), permeate flux (62.01 L/m2 h), higher HA rejection (92%), and antifouling improvement (RFR: 37.40%, FRR: 86.02%). Thus, the fMWCNT-TiO2/PES hybrid membrane is considered to be a great potential membrane for the improvement of ultrafiltration membranes.

Ongoing progress on novel nanocomposite membranes for the separation of heavy metals from contaminated water

Membranes, as the primary separation element of membrane-based processes, have greatly attracted the attention of researchers in several water treatment applications, including wastewater treatment, water purification, water disinfection, toxic and non-toxic chemical molecules, heavy metals, among others. Today, the removal of heavy metals from water has become challenging, in which chemical engineers are approaching new materials in membrane technologies. Therefore, the current review elucidates the progress of using different concepts of membranes and potential novel materials for such separations, identifying that polymeric membranes can exhibit a removal efficiency from 77 up to 99%; while novel nanocomposite membranes are able to offer complete removal of heavy metals (up to 100%), together with unprecedented permeation rates (from 80 up to 1, 300 L m^-2 h^-1). Thereby, the review also addresses the highlighted literature survey of using polymeric and nanocomposite membranes for heavy metal removal, highlighting the relevant insights and denoted metal uptake mechanisms. Moreover, it gives up-to-date information related to those novel nanocomposite materials and their contribution to heavy metals separation. Finally, the concluding remarks, future perspectives, and strategies for new researchers in the field are given according to the recent findings of this comprehensive review.

Kinetic and Isothermal Investigations of Cost-Effective Sorptive Elimination of Gentian Violet Dye from Water Using Haplophragma adenophyllum Biowaste

A novel biosorbent, Haplophragma adenophyllum (HAB) was employed to explore the biosorption mechanism of Gentian Violet (GV) dye. The novel sorbent was characterized by using FTIR spectra and physiochemical analysis. The effect of different optimizing factors like HAB dosage, GV initial concentration, contact time between sorbent and sorbate, pH of a solution, and the temperature was studied. The optimum removal of GV by HAB was observed at pH 6.0. The equilibrium study was carried out using Langmuir and Freundlich isotherms. Experimental data fitted well in Langmuir isotherm indicating monolayer isotherm with qmax value obtained at optimum process condition of 13.21 mg/g. Kinetics study was carried out and followed by pseudo-second-order model. Thermodynamics studies reveal the endothermic reaction.

Infusion of Silver-Polydopamine Particles into Polyethersulfone Matrix to Improve the Membrane's Dye Desalination Performance and Antibacterial Property

The advancement in membrane science and technology, particularly in nanofiltration applications, involves the blending of functional nanocomposites into the membranes to improve the membrane property. In this study, Ag-polydopamine (Ag-PDA) particles were synthesized through in situ PDA-mediated reduction of AgNO₃ to silver. Infusing Ag-PDA particles into polyethersulfone (PES) matrix affects the membrane property and performance. X-ray photoelectron spectroscopy (XPS) analyses confirmed the presence of Ag-PDA particles on the membrane surface. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) describe the morphology of the membranes. At an optimum concentration of Ag-PDA particles (0.3 wt % based on the concentration of PES), the modified membrane exhibited high water flux 13.33 L∙m⁻²∙h⁻¹ at 4 bar with high rejection for various dyes of >99%. The PES_Ag-PDA0.3 membrane had a pure water flux more than 5.4 times higher than that of a pristine membrane. Furthermore, in bacterial attachment using Escherichia coli, the modified membrane displayed less bacterial attachment compared with the pristine membrane. Therefore, immobilizing Ag-PDA particles into the PES matrix enhanced the membrane performance and antibacterial property.

Biosorption of methylene blue and eriochrome black T onto the brown macroalgae Fucus vesiculosus: equilibrium, kinetics, thermodynamics and optimization

The present study had the objective to investigate the equilibrium, kinetics, thermodynamic viability and system optimization of methylene blue (MB) and eriochrome black T (ET) biosorption onto Fucus vesiculosus (F. vesiculosus). A comprehensive bioadsorbent characterization was carried out. The infrared spectra suggested a physical biosorption mechanism that was later proven by the enthalpy change and the isotherms models. Furthermore, the process was best described by Langmuir and Temkin isotherm models, indicating the monolayer formation and the linear reduction of the heat of biosorption with the coverage degree. F. vesiculosus presented a maximum biosorption capacity of 698.477 mg·g-1 for MB, and 24.306 mg·g-1 for ET. Regarding kinetics, the pseudo-second-order kinetic model was the best fitted model. In addition, the film diffusion was confirmed as the process limiting step. The model's optimization was achieved in order to maximize the removal efficiency, corresponding to 99.28% for MB and 99.44% for ET.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

Transition Metal Dichalcogenide-Silk Nanofibril Membrane for One-Step Water Purification and Precious Metal Recovery

With the rapid worldwide industrial development, large amounts of pollutants such as heavy metals are discharged into the water sources, causing a huge threat to living beings. To mitigate this issue, there is an urgent need for new water treatment strategies. Inspired by a natural shell nacre structure and a multidimensional hybrid concept, we demonstrate multilayered inorganic-organic hybrid membranes using metallic molybdenum disulfide (MoS₂) as two-dimensional transition metal dichalcogenide nanosheets and one-dimensional silk nanofibrils for water purification. Because of its possessing negatively charged layers and interaction sites, the hybrid film could adsorb metal ions and dyes from water. The separation performance can be tuned by changing the component ratios of these two nanomaterials. During filtration, due to the reducing effect of the MoS₂ nanosheets, precious metal ions are reduced to their nanoparticle form without any further thermal or chemical treatments. In addition to the one-step removal and recovery of metal ions, the hybrid membranes exhibit excellent potential for the determination and removal of different dyes from water. The results of this research can open up an effective and green avenue for water purification and recovery of metal ions dissolved in water.

Industrial biowastes treatment using membrane bioreactors (MBRs) -a scientometric study

In the current global situation, the release of large amounts of potential effluents into the environment is considered as one of the most important and challenging issues. Innovations in the treatment methods to deal with this problem are among the research priorities within the scientific communities. Even though innumerable methods including physicochemical and biological have been used, yet no proper sustainability of the methods have been introduced. Membrane bioreactors (MBRs) have gained world-wide attention in recent years, but still there is no report in the literature to map the global research on this subject. The present manuscript describes a scientometric study on the global trend on the application of MBRs during the period 1991-2018 by employing variables such as: (1) distribution of documents over the adopted duration, (2) type of documents in this area, (3) rate of contribution among the different countries, (4) rate of cooperation among the authors, (5) frequency of the keywords co-occurring, (6) cited authors, (7) cited journals, (8) the frequency of categories appeared and (9) the cited documents. A total of 2452 bibliographic records from the Web of Science database were retrieved and analysed to generate results, thereby to create geospatial maps for a better understanding. The findings reveal an increase in the number of papers published in the world, especially China and USA being the top. The existing studies in MBRs research focus mainly on subject categories of the performance and fouling as the main criteria of the sustainable application of MBRs. This study therefore, provides an extensive understanding about the trends and research patterns of MBRs efforts worldwide.

Synthesis of Petal-Like MnO2 Nanosheets on Hollow Fe3O4 Nanospheres for Heterogeneous Photocatalysis of Biotreated Papermaking Effluent

Owing to the implementation of increasingly stringent water conservation policies and regulations, the pulp and paper mill industry must make increased efforts to meet the limits for pollutant emissions. The primary pretreatment and secondary biochemical treatment methods used currently generally fail to meet the country-specific environmental regulations, and the wastewater must be processed further even after being subjected to secondary biochemical treatments. In this work, we synthesized Fe₃O₄/MnO₂ nanocomposites (FMNs) with a flower-like structure for use in the heterogeneous photocatalytic treatment of biotreated papermaking wastewater. FMNs1.25, which were formed using a KMnO₄/Fe₃O₄ molar ratio of 1.25, could be separated readily using an external magnetic field and exhibited higher photocatalytic activity than those of the other samples as well as MnO₂ and Fe₃O₄. The effects of various experimental parameters on the photocatalytic activity of FMNs1.25, including the initial pH of the wastewater and the catalyst dosage, were determined. The common chemical oxygen demand (COD_Cr) reduction rate in the case of this sample reached 56.58% within 120 min at a pH of 3, the COD_Cr of effluent after treatment was 52.10 mg/L. Further, even under neutral conditions, the COD_Cr of the treated effluent was below the current limit for discharge in China. Moreover, the nanocomposites exhibited good recyclability, and their catalytic activity did not decrease significantly even after five usage cycles. This study should serve as a platform for the fabrication of effective photocatalysts for the advanced treatment of biotreated papermaking effluent and refractory organic wastewater.