Nanoparticles in household level water treatment: An overview

Removal of perfluoroalkyl and polyfluoroalkyl substances from tap water by means of point-of-use treatment: A review

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are widely used synthetic chemicals known for their environmental persistence and adverse health effects. For this reason, they have come under increasing scrutiny in drinking water, with several groundbreaking drinking water regulations adopted recently in the US and the EU. Nevertheless, conventional treatment processes often fail to remove PFAS effectively, raising concerns about drinking water quality and consumer health. More advanced treatment processes can remove PFAS with varying success from drinking water treatment plants. Using similar technology to that used in centralized PFAS treatment, many types of point-of-use/point-of-entry (POU/POE) water treatment devices are also commercially available. Herein, an overview of the literature regarding POU/POE efficacy in the removal of PFAS from tap water was compiled and critically discussed. Generally, they employ treatment technologies like granular activated carbon, ion exchange, and reverse osmosis to remove PFAS contamination. Despite their laboratory testing and often certification for removal of perfluorooctanoic and perfluorooctanesulfonic acid and other PFAS in tap water, in most cases their efficacy in actual use has yet to be well characterized. In particular, inconsistent testing and insufficient real-life studies complicate assessments of their long-term performance, especially against short-chain PFAS. Furthermore, improperly maintained activated carbon systems might even raise PFAS levels in purified water. Only a few peer-reviewed studies have measured PFAS levels at the tap after POU/POE treatment, with just five assessing removal efficiency in real-life scenarios. Limited to the findings described, not all filters were demonstrated to be effective, especially against short-chain PFAS. Additionally, inconsistent testing methods that do not follow standard guidelines make it hard to compare filter results, and the long-term performance of these systems remains uncertain. More occurrence studies are essential to verify performance over time and understand exposure to these contaminants through water treated by household systems.

Effective adsorption of amoxicillin by using UIO-66@ Cr-MIL-101 nanohybrid: isotherm, kinetic, thermodynamic, and optimization by central composite design

In this research, the amoxicillin (AMX) removal was studied on a prepared nanosorbent from MOFs. The aim of this research work is to prepare nanohybrids based on metal-organic frameworks (MOFs) as an efficient nanosorbent for the absorption of amoxicillin drug. In this study, UIO-66 nanoparticles (UIO-66 NPs) were prepared from Zirconium (Zr) metal and 1,4-benzene dicarboxylic acid (BDC). Then UIO-66@Cr-MIL-101 nanohybrid was synthesized by hydrothermal method. Structural and physicochemical properties of nanohybrid UIO-66@Cr-MIL-101 were characterized by different analyses such as X-ray diffraction analysis (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), therapeutic goods administration (TGA), and Brunauer-Emmett-Teller (BET). The effect of four fundamental variables effective on adsorption was optimized by the central composite response surface methodology (CCRSM). This parameters including loading percentage of Cr-MIL-101 NPs (10-30%), initial concentration of AMX (20-140 mg L-1), contact time (20-60 min), and pH (20-10). The removal percentage (Re%) of AMX equal to 99.50% was obtained under the following conditions: The loading value of 20% Wt%, the initial concentration of AMX 80 mg L-1, contact time 20 min, and pH = 6. Also, the experimental data were investigated with famous kinetic models and isotherms, and it was observed that AMX removal by nanohybrid is correlated with the PSO kinetic model and Langmuir isotherm.

Biocidal activity of multifunctional cuprite-doped anion exchanger - Influence of bacteria type and medium composition

The study presents unconventional, bifunctional, heterogeneous antimicrobial agents - Cu2O-loaded anion exchangers. The synergetic effect of a cuprous oxide deposit and polymeric support with trimethyl ammonium groups was studied against the reference strains of Enterococcus faecalis ATCC 29212 and Pseudomonas aeruginosa ATCC 27853. Biological testing (minimum bactericidal concentration, MBC), time- and dose-dependent bactericidal effect (under different conditions - medium composition and static/dynamic culture) demonstrated promising antimicrobial activity and confirmed its multimode character. The standard values of MBC, for all studied hybrid polymers and bacteria, were similar (64-128 mg/mL). However, depending on the medium conditions, due to the copper release into the bulk solution, bacteria were actively killed even at much lower doses of the hybrid polymer (25 mg/mL) and low Cu(II) concentrations in solution (0.01 mg/L). Simultaneously, confocal microscopic studies confirmed the effective inhibition of bacterial adhesion and biofilm formation on their surface. The studies conducted under different conditions showed also the influence of the structure and physical properties of studied materials on the biocidal efficacy and an antimicrobial action mechanism was proposed that could be significantly affected by electrostatic interactions and copper release to the solution. Although the antibacterial activity was also dependent on various strategies of bacterial cell resistance to heavy metals present in the aqueous medium, the studied hybrid polymers are versatile and efficient biocidal agents against bacteria of both types, Gram-positive and Gram-negative. Therefore, they can be a convenient alternative for point-of-use water disinfection systems providing water quality in medical devices such as dental units, spa equipment, and aesthetic devices used in the cosmetic sector.

Multifunctional Composite Materials Based on Anion Exchangers Modified with Copper Compounds-A Review of Their Synthesis Methods, Characteristics and Applications

As copper and its compounds are of fundamental importance for the development of innovative materials, the synthesis of composites intended for water purification was undertaken in which submicron copper containing particles were dispersed within the matrix of a strongly basic anion exchanger, with a macroporous and gel-like structure. Due to their trimethylammonium functional groups, the host materials alone exhibited an affinity to anionic water contaminants and antimicrobial properties. The introduction of such particles as CuO, Cu2O, metallic Cu, CuO/FeO(OH), Cu4O3, Cu(OH)2, Cu4(OH)6SO4, Cu2(OH)3Cl increased these properties and demonstrated new properties. The composites were obtained unconventionally, in ambient conditions, using eco-friendly reagents. Alternative synthesis methods were compared and optimized, as a result of which a new group of hybrid ion exchangers was created (HIXs) containing 3.5-12.5 wt% of Cu. As the arrangement of the inorganic phase in the resin matrix was atypical, i.e., close to the surface of the beads, the obtained HIXs exhibited excellent kinetic properties in the process of oxidation and adsorption of As(III), as well as catalytic properties for the synthesis of triazoles via click reaction, and also antimicrobial properties in relation to Gram-positive Enterococcus faecalis and Gram-negative Pseudomonas aeruginosa and Escherichia coli, preventing biofilm formation. Using thermogravimetry, the effect of the inorganic phase on decomposition of the polymeric phase was evaluated for the first time and comprehensively, confirming the relationship and finding numerous regularities. It was also found that, depending on the oxidation state (CuO, Cu2O, Cu), copper-containing particles affected the textural properties of the polymeric phase endowing a tighter structure, limiting the porosity and reducing the affinity for water.

Iron oxide nanoparticles/nanocomposites derived from steel and iron wastes for water treatment: A review

Iron oxide nanoparticles (IONPs) are characterized by superior magnetic properties, high surface area to volume ratio, and active surface functional groups. These properties aid in removal of pollutants from water, through adsorption and/or photocatalysis, justifying the choice of IONPs in water treatment systems. IONPs are usually developed from commercial chemicals of ferric and ferrous salts alongside other reagents, a procedure that is costly, environmentally unfriendly and limits their mass production. On the other hand, steel and iron industries produce both solid and liquid wastes which in most cases are piled, discharged into water streams or landfilled as strategies to dispose them off. Such practices are detrimental to environmental ecosystems. Given the high content of iron present in these wastes, they can be used to generate IONPs. This work reviewed published literature through selected key words on the deployment of steel and/or iron-based wastes as IONPs precursors for water treatment. The findings reveal that steel waste-derived IONPs have properties such as specific surface area, particle sizes, saturation magnetization, and surface functional groups that are comparable or sometimes better than those synthesized from commercial salts. Furthermore, the steel waste-derived IONPs have high removal efficacy for heavy metals and dyes from water with possibilities of being regenerated. The performance of steel waste-derived IONPs can be enhanced by functionalization with different reagents such as chitosan, graphene, and biomass based activated carbons. Nonetheless, there is need to explore the potential of steel waste-based IONPs in removing contaminants of emerging concern, modifying pollutant detection sensors, their techno-economic feasibility in large treatment plants, toxicity of these nanoparticles when ingested into the human body, among other areas.

Synthesis, Characterization and Antimicrobial Activity of Zinc Oxide Nanoparticles against Selected Waterborne Bacterial and Yeast Pathogens

The disinfection of wastewater using nanoparticles (NPs) has become a focal area of research in water treatment. In this study, zinc oxide (ZnO) NPs were synthesized using the microwave heating crystallization technique and characterized using transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Qualitative well diffusion and quantitative minimum inhibitory concentration (MIC) tests were conducted to determine the antimicrobial activity of ZnO NPs against selected waterborne pathogenic microbes. FTIR spectral studies confirmed that the binding of urea with Zn occurs through Zn–O stretching. XRD confirmed the crystallized identity in a hexagonal ZnO wurtzite-type structure. The formation of zones of inhibition and low MIC values in the antimicrobial analysis were indicative of the effective antimicrobial activity of zinc oxide nanoparticles against the test microorganisms. The application of metallic nanoparticles in water treatment could curb the spread of waterborne microbial diseases.

Green and eco-friendly synthesis of TiO2 nanoparticles and their application for removal of cadmium from wastewater: reaction kinetics study

The heavy metal cadmium (Cd) is known to be a widespread environmental contaminant and a potential toxin that may adversely affect human health across the globe. Green nanotechnology has recently received a lot of attention for developing eco-friendly, low-cost renewable and sustainable materials for the efficient removal of persistent contaminants from wastewater, including heavy metals (HMs). The current study compared the ability of titanium dioxide nanoparticles (TiO2 NPs) synthesized from Trianthema portulacastrum (A) and Chenopodium quinoa (B) extracts to remove Cd from wastewater. The washed biomass of both the plants was dried under shade for a few days and was ground into the fine particles in a blender. The powdered biomass of T. portulacastrum and C. quinoa was soaked separately in distilled water (@ 10 g/100 ml) for 36 h. The stock solution of titanium (0.3 M) was prepared from concentrated titanium tetraisopropoxide (TTIP) and was mixed with the plant extracts at 1:2 ratio of extract to TTIP solution with continuous stirring at room temperature. A light brown scum like TiO2-NPs were obtained at the bottom of china dish and calcined at 450 °C for 4 h. Finally, after natural cooling, the TiO2-NPs were collected and used for the sorption of Cd through wastewater. Sorption attributes of both TiO2 NPs (A, B) were investigated over contact time, dosage of adsorbent, pH, and initial concentration of Cd. Maximum sorption was obtained (46 mgg−1) by TiO2 NPs (A), followed by 44 mg Cd g−1 with TiO2 NPs (B) at pH 4.2, an optimum adsorbent dosage 0.7 g L−1, Cd initial level 30 mg L−1, with contact time of 2 h. Pseudo-second-order kinetic model was suited for adsorption experimental data using both nanoparticles. These results validated the potential use of TiO2 NPs to remove liquified cadmium at high concentrations from the industrial wastewater.

Biogenic Synthesis of Silver Nanoparticles, Characterization and Their Applications—A Review

With the growing awareness for the need of sustainable environment, the importance of synthesizing and the application of green nanoparticles has gained special focus. Among various metal nanoparticles, silver nanoparticles (AgNPs) have gain significant attention. AgNPs are synthesized conventionally by physical and chemical methods using chemicals such as reducing agents, which are hazardous to environment due to their toxic properties, provoking a serious concern to create and develop environment friendly methods. Thus, biological alternatives are emerging to fill gaps, such as green syntheses that use biological molecules taken from plant sources in the form of extracts, which have shown to be superior to chemical and physical approaches. These biological molecules derived from plants are assembled in a highly regulated manner to make them suitable for metal nanoparticle synthesis. The current review outlines the wide plant diversity that may be used to prepare a rapid and single-step procedure with a green path over the traditional ones, as well as their antifungal activity.

Iron Oxide Nanoparticles: Physicochemical Characteristics and Historical Developments to Commercialization for Potential Technological Applications

Iron oxide nanoparticles (IONPs) have gained increasing attention in various biomedical and industrial sectors due to their physicochemical and magnetic properties. In the biomedical field, IONPs are being developed for enzyme/protein immobilization, magnetofection, cell labeling, DNA detection, and tissue engineering. However, in some established areas, such as magnetic resonance imaging (MRI), magnetic drug targeting (MDT), magnetic fluid hyperthermia (MFH), immunomagnetic separation (IMS), and magnetic particle imaging (MPI), IONPs have crossed from the research bench, received clinical approval, and have been commercialized. Additionally, in industrial sectors IONP-based fluids (ferrofluids) have been marketed in electronic and mechanical devices for some time. This review explores the historical evolution of IONPs to their current state in biomedical and industrial applications.

Performance evaluation of ceramic pot filters combined with adsorption processes for the removal of heavy metals and phenolic compounds

It has been demonstrated that the ceramic pot filters (CPFs) with impregnated colloidal silver are efficient for the removal of turbidity and pathogens for household water treatment. This investigation evaluated the efficiency of two filter models for the removal of chemical contaminants (Hg, Pb, As and phenolic compounds) during 175 days. The first model is a traditional CPF impregnated with colloidal silver and the second consists of the ceramic silver-impregnated pot plus a post-filtration column with granular activated carbon and zeolite (CPF + GAC-Z). The results of the CPF showed average efficiencies of 91.5% (Hg), 92% (Pb), 50.2% (As) and 78.7% (phenols). The CPF + GAC-Z showed similar efficiencies for the removal of heavy metals (92.5% Hg, 98.1% Pb and 52.3% As) and a considerably higher efficiency for the removal of phenols (96.4%). The As concentration of the filtered water in both systems was higher than the regulatory limit. The ceramic pot was responsible for the highest removal of chemical compounds. It can be concluded that the traditional CPF is a viable option for water supply treatment at the household level for the removal of chemical contaminants. The efficiency of this filter can be improved with the post-filtration column mainly for the removal of organic constituents.

Adsorptive removal of antibiotic ofloxacin in aqueous phase using rGO-MoS2 heterostructure

This paper reports the synthesis, characterization and detailed adsorption studies of rGO-MoS₂ heterostructure. The heterostructure was explored for the adsorption of ofloxacin from the aqueous phase. Detailed studies were conducted to study the effect of crucial parameters such as pH of drug solution, adsorbent dose, temperature and initial drug concentration on the adsorption capacity. Even with a low surface area of 17.17 m²/g, the adsorbent exhibited maximum removal efficiency of 95% at a dose of 0.35 g/L and an initial drug concentration of 10 mg/L in 240 min. Thermodynamic study revealed the values for ∆H⁰ and ∆G⁰ to be - 101.15 and - 7.47 kJ/mol respectively, indicating that the process is spontaneous and exothermic in nature. The heterostructure adsorbent exhibited remarkable reusability and stability up to five cycles. The heterostructure combines excellent adsorption capabilities arising from the two-dimensional structures of rGO and MoS₂ with the stronger and more specific interaction with the drug molecules which results in better performance towards the removal of the drug. The excellent performance of the heterostructure indicates that combining 2D materials can be a good strategy for producing highly efficient materials towards the adsorptive removal of pollutants.

Making Waves: Principles for the Design of Sustainable Household Water Treatment

Household water treatment (HWT) represents a key engineering intervention for billions of people's daily and emergency water needs. However, established HWT practices experience different challenges to achieve sustainability. Here, five essential principles are identified and discussed for the design of sustainable HWT, including treatment capability, environmental friendliness, user experience, economic viability, and social acceptance. A well-implemented HWT, with a consideration of energy resilience, relies heavily on advanced materials, innovative technologies, and/or creative designs capable of reliably abating both traditional and emerging contaminants, while minimizing undesirable chemical leaching and the formation of harmful disinfection byproducts. Environmental friendliness can be pursued by appreciably reducing environmental and energy footprints and properly managing HWT residuals. Meanwhile, a user-centered design approach and economic consideration need to be integrated into the HWT development to improve end users' willingness to use and pay, respectively. Finally, social acceptance should be intertwined by fostering public acceptance and market adoption for strengthening commercial viability of new-generation HWT products. Given that these principles span across different domains, multidisciplinary collaboration is required throughout different stages of the HWT technology innovation.

Applicability of statistical analysis for performance and reliability evaluation of large-scale water treatment plants with direct filtration systems

Water treatment plants (WTPs) are extremely important in basic sanitation services because of their association with human health by producing safe drinking water. Thus, their proper operation is of utmost relevance and has led to the development of distinct performance evaluation methodologies. Direct filtration is a leading technology applied in WTPs. However, although it costs less than conventional treatment, it might also be less flexible and robust. To evaluate performance with data from real-scale WTPs with direct filtration systems, the use of a statistical analysis methodology for turbidity, apparent color, and pH data from raw and effluent water is proposed. Reliability analysis, a probabilistic-based methodology, was applied for turbidity alongside evaluating the compliance of the treated water with different potability standards. The parameters pH (between 6.0 and 8.0) and apparent color (< 15 HU) showed almost complete compliance (> 99%). Reliability analysis could not be applied for apparent color and pH, while apparent color did not adhere to the lognormal distribution frequency. The turbidity results show high variability in the coefficients of variation and reliability among various plants and a general difficulty in complying with stricter standards, such as the 0.1 and 0.3 NTU defined by the United States Environmental Protection Agency. All WTP studies show a 95% compliance with the World Health Organization standard of 5.0 NTU. A higher value for the coefficient of reliability and a lower value for the variation coefficient could indicate a more stable process, regardless of the treated water quality, highlighting the relevance of applying combined methods for performance evaluation, such as compliance with established standards.

Magnetic carnosine-based metal-organic framework nanoparticles: fabrication, characterization and application as arsenic adsorbent

This study centers on the controllable synthesis, characterization, and application of a novel magnetic bio-metal-organic framework (Bio-MOF) for the adsorption and subsequent removal of arsenic from aqueous solutions. Zinc ions and carnosine (Car) were exploited to construct the Car-based MOF on the surface of magnetite (Fe₃O₄ NPs). The Magnetite precoating with Car led to an increase in the yield and the uniform formation of the magnetic MOF. The prepared magnetic Bio-MOF nanoparticles (Fe₃O₄-Car-MOF NPs) had semi-spherical shape with the size in the range of 35-77 nm, and the crystalline pattern of both magnetite and Car-based MOF. The NPs were employed as an adsorbent for arsenic (As) removal. The adsorption analyses revealed that all studied independent variables including pH, adsorbent dose, and initial arsenic concentration had a significant effect on the arsenic adsorption, and the adsorption data were well matched to the quadratic model. The predicted adsorption values were close to the experimental values confirming the validity of the suggested model. Furthermore, adsorbent dose and pH had a positive effect on arsenic removal, whereas arsenic concentration had a negative effect. The adsorption isotherm and kinetic studies both revealed that As adsorption fitted best to the Freundlich isotherm model. The maximum monolayer adsorption capacity (94.33 mg/g) was achieved at room temperature, pH of 8.5 and adsorbent dose of 0.4 g/L. Finally, the results demonstrated that the adsorbent could be efficiently applied for arsenic removal from aqueous environment.

Adsorption of cadmium by a high-capacity adsorbent composed of silicate-titanate nanotubes embedded in hydrogel chitosan beads

In this study, we developed a nanoparticle-based mesoporous composite that consisted of silicate-titanate nanotubes (STNTs) supported in hydrogel chitosan beads (STNTs-Ch beads) and was studied for Cd²⁺ adsorption. By using Fourier-transform infrared spectroscopy, transmission and scanning electron microscopy coupled to an energy-dispersive X-ray spectrometer, we could determine that the hollow STNTs were highly dispersed in the walls of the hollow beads. The dispersion was attributed to the effect of pH when the composite was prepared and we observed a non-interaction between STNTs and chitosan. The adsorption studies of Cd²⁺ showed that the kinetic rate (k ₂) increased 3-fold and that the diffusion rate (K _d) increased 2-fold after the embedment. Moreover, the maximum capacity of adsorption of STNTs-Ch beads was 2.3 times higher than that of STNTs alone. The treatment of a synthetic Cd²⁺ solution and a real leachate in continuous mode showed two phases in which it was observed higher removed fractions of transition metal ions (Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺ and Cu²⁺) and the post-transition metal ion Pb²⁺, in comparison to the removed fractions of alkali and alkali-earth metal ions (Ca²⁺, K⁺, Mg²⁺). The composite was successfully reused four times when adsorbing Cd²⁺, saving three times the needed amounts of TiO₂, SiO₂ and chitosan for the production of the material. This composite was produced in a simple way and shows the potential for wastewater treatment.

Development of a new vacuum impregnation method at room atmosphere to produce silver-copper oxide nanoparticles on activated carbon for antibacterial applications

A new impregnation method was tested in this study. Without a stabilizing agent, silver and copper metallic compounds were directly impregnated on activated carbon using vacuum impregnation followed by drying at 100°C and vacuum impregnation followed by thermal decomposition at 350°C in an ambient atmosphere. The effect of thermal decomposition on the structural, morphological, and textural characteristics of the modified nanomaterials was analysed by Brunauer-Emmett-Teller, X-ray diffraction, scanning electron microscopy, energy dispersive X-Ray, and transmission electron microscopy. The characteristics of the produced materials were not altered. Silver and CuO nanoparticles were identified in the samples with average diameters ranging from 33.3-36.8 nm and 29.0-33.3 nm, respectively. The materials were tested for their antibacterial capacity and for their potential to leach Ag and Cu into water, thus analysing the effect of the thermal decomposition process on the impregnation process. The vacuum impregnation process followed by thermal decomposition produced the best results, with the resultant material reducing bacterial abundance by 5.31-6.61 log and leaching only low concentrations of metals into the water (Ag - 0.010-0.025 mg L^-1 and Cu - 0.270-0.361 mg L^-1). Samples produced without the thermal decomposition step reached bacterial reductions of 1.86-1.97 log and yielded higher concentrations of metals in the water (Ag - 0.051-0.086 mg L^-1 and Cu - 0.819-0.894 mg L^-1).

Improving the performance of solar still using different heat localization materials

This work aimed to explore a new technique for improving the performance of solar stills (SSs) through utilizing three different types of a new hybrid structure of heat localization materials (HSHLM) floating on the water surface to increase the evaporation rate as well as water production and minimize heat losses. The three types were exfoliated graphite flakes with wick (type A), carbon foam with wick (type B), and exfoliated graphite flakes with wick and carbon foam (type C). These hybrid structures had good features such as high absorption and hydrophilic capillary forces to interconnected pores for fluid flow through the structure. Two identical SSs were designed, fabricated, and investigated to assess SSs' performance with and without HSHLM (modified and conventional SSs). The obtained results showed that the daily productivity was enhanced by 34.5, 28.6, and 51.8% for type A, type B, and type C, respectively, relative to the conventional one. Moreover, the efficiency of the SS reached about 37.6% for type C; while, it reached about 27% for the conventional SS. Contrary to conventional SSs, the use of HSHLM resulted in increasing the productivity proportional to water depth.

Molecularly imprinted microparticles (microMIPs) embedded with reduced graphene oxide for capture and destruction of E.coli in drinking water

In this article for the first time, we have reported, a facile way for the creation of E.coli impressions in the polymer for selective capture and to destroy E. coli in drinking water. This microporous imprinted polymer has shown the existence of micrometer size rod shape cavities with the population of 2.45 × 10² ± 60 imprints per cm². Adsorption capacity of the polymer for E.coli was 10³ CFU mg^-1. This microporous imprinted polymer captured 99% of the bacteria within 30 min at initial concentration of 10⁹ CFU mL^-1. The non-imprinted polymer prepared without the bacteria imprinting reported only 40% of the bacteria removal even after 60 min. The reduced graphene oxide was embedded in the microporous imprinted polymer and it reported minimum inhibitory concentration at 7.4 mg L^-1. Within 10 min, reduced graphene oxide completely kills the E.coli while microporous imprinted polymer was embedded with the reduced graphene oxide takes about 13 min to disinfect the water. The reduced graphene oxide nanoparticles were near the imprinted cavity to generate localized temperature between 180 and 210 °C to kill the bacterial cells trapped inside the imprinted cavities of the polymer. The thermal atomic force microscope with the specialized heated probe tips were used to determine the localized temperature in the polymers. The localized thermal energy would be responsible for the production of superoxides, which were as similar to photolysis reactions, and would be further improving antibacterial activity. The combination of selective capture and destruction of pathogens in a single molecular construct improves disinfection of drinking water.

Role of Nanomaterials in the Treatment of Wastewater: A Review

Water is an essential part of life and its availability is important for all living creatures. On the other side, the world is suffering from a major problem of drinking water. There are several gases, microorganisms and other toxins (chemicals and heavy metals) added into water during rain, flowing water, etc. which is responsible for water pollution. This review article describes various applications of nanomaterial in removing different types of impurities from polluted water. There are various kinds of nanomaterials, which carried huge potential to treat polluted water (containing metal toxin substance, different organic and inorganic impurities) very effectively due to their unique properties like greater surface area, able to work at low concentration, etc. The nanostructured catalytic membranes, nanosorbents and nanophotocatalyst based approaches to remove pollutants from wastewater are eco-friendly and efficient, but they require more energy, more investment in order to purify the wastewater. There are many challenges and issues of wastewater treatment. Some precautions are also required to keep away from ecological and health issues. New modern equipment for wastewater treatment should be flexible, low cost and efficient for the commercialization purpose.

Cyanobacteria as a bioreactor for synthesis of silver nanoparticles-an effect of different reaction conditions on the size of nanoparticles and their dye decolorization ability

The green synthesis of metallic nanoparticles has paved the way for improving and protecting the environment by decreasing the use of toxic chemicals and eliminating biological risks in biomedical applications. Biological synthesis of metal nanoparticles is gaining more importance due to simplicity, rapid rate of synthesis and eco-friendliness. In the present investigation cyanobacterial (Microchaete NCCU-342) cell free aqueous extract has been used for optimizing biosynthesis of silver nanoparticles (AgNP). The optimized reaction parameters for efficient synthesis of AgNP were: biomass quantity of 80 μg/ml, pH 5.5, 60 °C temperature, duration of 60 min UV light exposure and 1 mM AgNO₃ concentration. AgNP was characterized by UV-Visible Spectrophotometery, Transmission Electron Microscopy and Dynamic light scattering. The smallest nanoparticles (obtained from biomass parameter were spherical, polydisperessed and in the range of 60-80 nm) were characterized further in a degradation study of azo dye methyl red. Degradation of methyl red within 2 h was more with AgNP (84.60%) as compared to cyanobacterial extract (49.80%).

Simultaneous removal of pollutants from water using nanoparticles: A shift from single pollutant control to multiple pollutant control

The steady increase in population, coupled with the rapid utilization of resources and continuous development of industry and agriculture has led to excess amounts of wastewater with changes in its composition, texture, complexity and toxicity due to the diverse range of pollutants being present in wastewater. The challenges faced by wastewater treatment today are mainly with the complexity of the wastewater as it complicates treatment processes by requiring a combination of technologies, thus resulting in longer treatment times and higher operational costs. Nanotechnology opens up a novel platform that is free from secondary pollution, inexpensive and an effective way to simultaneously remove multiple pollutants from wastewater. Currently, there are a number of studies that have presented a myriad of multi-purpose/multifunctional nanoparticles that simultaneously remove multiple pollutants in water. However, these studies have not been collated to review the direction that nanoparticle assisted wastewater treatment is heading towards. Hence, this critical review explores the feasibility and efficiency of simultaneous removal of co-existing/multiple pollutants in water using nanomaterials. The discussion begins with an introduction of different classes of pollutants and their toxicity followed by an overview and highlights of current research on multipollutant control in water using different nanomaterials as adsorbents, photocatalysts, disinfectants and microbicides. The analysis is concluded with a look at the current attempts being made towards commercialization of multipollutant control/multifunctional nanotechnology inventions. The review presents evidence of simultaneous removal of pathogenic microorganisms, inorganic and organic compound chemical pollutants using nanoparticles. Accordingly, not only is nanotechnology showcased as a promising and an environmentally-friendly way to solve the limitations of current and conventional centralised water and wastewater treatment facilities but is also presented as a good substitute or supplement in areas without those facilities.

Enhanced antibacterial profile of nanoparticle impregnated cellulose foam filter paper for drinking water filtration

Filtration is a promising water treatment method to purify drinking water. To develop highly efficient drinking water filter paper, water-resistant cellulose foam paper with a high wet strength property was fabricated using diverse metal oxide (e.g., copper oxide (CuO), zinc oxide (ZnO), and silver oxide (Ag₂O)) nanoparticles. These nanoparticles were synthesized using the hydrothermal reaction method. Their morphological structures were studied using a field emission scanning electron microscope (FESEM). The presence of coated nanoparticles on the cellulose foam filter was verified by energy dispersive X-ray spectroscopy (EDX) methods. The antibacterial performance of different types of modified cellulose foam filters was studied against E. coli, P. aeruginosa, B. subtilis, and B. cereus strains using the zone of inhibition test. The antibacterial profile of the cellulose foam filter impregnated with Ag₂O nanoparticles, when tested against different types of bacteria, exhibited higher antibacterial activity than the cellulose foam filter impregnated with ZnO and CuO nanoparticles.