Performance of nZVI/H 2 O 2 process in degrading polyvinyl alcohol in aqueous solutions

The self-designed reactor to achieve efficient degradation of polyvinyl alcohol under high-pressure and high-temperature conditions

A huge amount of polyvinyl alcohol (PVA) fabric is abandoned from nuclear power plants every year, the traditional treatment process will occupy land resources and pollute the environment; therefore, a lot of research has been carried out on the chemical treatment of PVA fabric. Herein, the performance of degradation of polyvinyl alcohol under high-pressure and high-temperature conditions is investigated. The effects of the initial pH value, reaction temperature, molar ratio of H2O2/Fe2+, and H2O2 dosage on PVA degradation were evaluated. In the tested ranges in this work, the degradation of PVA fabric via high-pressure and high-temperature method was optimum at the initial pH value of 4, reaction temperature of 300℃, molar ratio of H2O2/Fe2+ as 10, and H2O2 dosage of 13 g/L. The PVA removal rate and TOC removal rate were 99.99% and 97.36%, respectively. Meanwhile, the high-pressure and high-temperature methods also had a great effect on the removal of Rhodamine-B and Reactive Red X-3B, the removal rates of Rhodamine-B and Reactive Red X-3B were 99.83% and 99.76%, respectively. The reaction mechanism of high-pressure and high-temperature methods was also discussed in this study.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

Feasibility of a Heterogeneous Nanoscale Zero-Valent Iron Fenton-like Process for the Removal of Glyphosate from Water

Glyphosate is a widely used herbicide, and it is an important environmental pollutant that can have adverse effects on human health. Therefore, remediation and reclamation of contaminated streams and aqueous environments polluted by glyphosate is currently a worldwide priority. Here, we show that the heterogeneous nZVI-Fenton process (nZVI + H₂O₂; nZVI: nanoscale zero-valent iron) can achieve the effective removal of glyphosate under different operational conditions. Removal of glyphosate can also take place in the presence of excess nZVI, without H₂O₂, but the high amount of nZVI needed to remove glyphosate from water matrices on its own would make the process very costly. Glyphosate removal via nZVI--Fenton was investigated in the pH range of 3-6, with different H₂O₂ concentrations and nZVI loadings. We observed significant removal of glyphosate at pH values of 3 and 4; however, due to a loss in efficiency of Fenton systems with increasing pH values, glyphosate removal was no longer effective at pH values of 5 or 6. Glyphosate removal also occurred at pH values of 3 and 4 in tap water, despite the occurrence of several potentially interfering inorganic ions. Relatively low reagent costs, a limited increase in water conductivity (mostly due to pH adjustments before and after treatment), and low iron leaching make nZVI-Fenton treatment at pH 4 a promising technique for eliminating glyphosate from environmental aqueous matrices.

Hydrogen Peroxide Activated by Biochar-Supported Sulfidated Nano Zerovalent Iron for Removal of Sulfamethazine: Response Surface Method Approach

Biochar (BC)-supported sulfide-modified nanoscale zerovalent iron (S-nZVI/BC) was prepared using the liquid-phase reduction method for the application of the removal of sulfamethazine (SMZ) from water. The reaction conditions were optimized by the Box−Behnken response surface method (RSM). A model was constructed based on the influence factors of the removal rate, i.e., the carbon-to-iron ratio (C/Fe), iron-sulfur ratio (Fe/S), pH, and hydrogen peroxide (H2O2) concentration, and the influence of each factor on the removal efficiency was investigated. The optimal removal process parameters were determined based on theoretical and experimental results. The results showed that the removal efficiency was significantly affected by the C/Fe ratio and pH (p < 0.0001) but relatively weakly affected by the Fe/S ratio (p = 0.0973) and H2O2 concentration (p = 0.022). The optimal removal process parameters were as follows: 0.1 mol/L H2O2, a pH of 3.18, a C/Fe ratio of 0.411, and a Fe/S ratio of 59.75. The removal rate of SMZ by S-nZVI/BC was 100% under these conditions. Therefore, it is feasible to use the Box−Behnken RSM to optimize the removal of emerging pollutants in water bodies by S-nZVI/BC.

Evaluation of Fe2+/Peracetic Acid to Degrade Three Typical Refractory Pollutants of Textile Wastewater

In this work, the degradation performance of Fe2+/PAA/H2O2 on three typical pollutants (reactive black 5, ANL, and PVA) in textile wastewater was investigated in comparison with Fe2+/H2O2. Therein, Fe2+/PAA/H2O2 had a high removal on RB5 (99%) mainly owing to the contribution of peroxyl radicals and/or Fe(IV). Fe2+/H2O2 showed a relatively high removal on PVA (28%) mainly resulting from ·OH. Fe2+/PAA/H2O2 and Fe2+/H2O2 showed comparative removals on ANL. Additionally, Fe2+/PAA/H2O2 was more sensitive to pH than Fe2+/H2O2. The coexisting anions (20–2000 mg/L) showed inhibition on their removals and followed an order of HCO3− > SO42− > Cl−. Humic acid (5 and 10 mg C/L) posed notable inhibition on their removals following an order of reactive black 5 (RB5) > ANL > PVA. In practical wastewater effluent, PVA removal was dramatically inhibited by 88%. Bioluminescent bacteria test results suggested that the toxicity of Fe2+/PAA/H2O2 treated systems was lower than that of Fe2+/H2O2. RB5 degradation had three possible pathways with the proposed mechanisms of hydroxylation, dehydrogenation, and demethylation. The results may favor the performance evaluation of Fe2+/PAA/H2O2 in the advanced treatment of textile wastewater.

Surface-mediated periodate activation by nano zero-valent iron for the enhanced abatement of organic contaminants

Periodate (PI)-based advanced oxidation processes have recently received increasing attentions. Herein, PI was readily activated by nano zero-valent iron (nZVI) and subsequently led to the enhanced oxidation of organic contaminants, with the removal performance of sulfadiazine (SDZ) in the nZVI/PI process even higher than that in the nZVI/peroxydisulfate process under identical conditions. Kinetic experiments indicated that the decay of SDZ was susceptible to the dosage of nZVI and PI, but was barely affected by pH values (4.0-7.0) under buffered conditions, suggesting the promising performance of the nZVI/PI process in a relatively wide pH range. Selective degradation of contaminants and ¹⁸O-isotope labeling assays collectively demonstrated that iodate radical (^•IO₃), high-valent iron-oxo species (Fe(IV)) and hydroxyl radical (^•OH) were responsible for the abatement of organic contaminants. More importantly, due to the relatively weak steric hindrance effect of PI, PI easily adsorbed on the surface of nZVI and no iron leaching was detected throughout the reaction, implying that PI activation induced by nZVI was a surface-mediated process. Besides, PI was not transformed into harmful reactive iodine species. This study proposed an environmental-friendly approach for PI activation and shed new lights on the PI-based processes.

A review of the new multifunctional nano zero-valent iron composites for wastewater treatment: Emergence, preparation, optimization and mechanism

Nano zero-valent iron (NZVI) with high chemical reactivity and environmental friendliness had recently become one of the most efficient technologies for wastewater restoration. However, the unitary NZVI system had not met practical requirements for wastewater treatments. Expectantly, the development of NZVI would prefer multifunctional NZVI-based composites, which could be prepared and optimized by the combined methods and technologies. Consequently, a systematic and comprehensive summary from the perspective of multifunctional NZVI-composite had been conducted. The results demonstrated that the advantages of various systems were integrated by multifunctional NZVI-composite systems with a more significant performance of pollutant removal than those of the bare NZVI and its composites. Simultaneously, characteristics of the product prepared by the incorporation of numerous methods were superior to those by a simple method, resulting in the increase of the entirety efficiency. By comparison with other preparation methods, the ball milling method with higher production and field application potential was worthy of attention. After combining multiple technologies, the effect of NZVI and its composite systems could be dramatically strengthened. Preparation technology parameters and treatment effect of contaminants could be further optimized using more comprehensive experimental designs and mathematical models. The mechanism of the multifunctional NZVI system for contaminants treatment was primarily focused on adsorption, oxidation, reduction and co-precipitation. Multiple techniques were combined to enhance the dispersion, alleviating passivation, accelerating electron transfer efficiency or mass transfer action for optimizing the effect of NZVI composites.

Recent Advances in Dynamic Modeling and Process Control of PVA Degradation by Biological and Advanced Oxidation Processes: A Review on Trends and Advances

Polyvinyl alcohol (PVA) is an emerging pollutant commonly found in industrial wastewater, owing to its extensive usage as an additive in the manufacturing industry. PVA’s popularity has made wastewater treatment technologies for PVA degradation a popular research topic in industrial wastewater treatment. Although many PVA degradation technologies are studied in bench-scale processes, recent advancements in process optimization and control of wastewater treatment technologies such as advanced oxidation processes (AOPs) show the feasibility of these processes by monitoring and controlling processes to meet desired regulatory standards. These wastewater treatment technologies exhibit complex reaction mechanisms leading to nonlinear and nonstationary behavior related to variability in operational conditions. Thus, black-box dynamic modeling is a promising tool for designing control schemes since dynamic modeling is more complicated in terms of first principles and reaction mechanisms. This study seeks to provide a survey of process control methods via a comprehensive review focusing on PVA degradation methods, including biological and advanced oxidation processes, along with their reaction mechanisms, control-oriented dynamic modeling (i.e., state-space, transfer function, and artificial neural network modeling), and control strategies (i.e., proportional-integral-derivative control and predictive control) associated with wastewater treatment technologies utilized for PVA degradation.

Construction of three-dimensional reduced graphene oxide wrapped nZVI doped with Al2O3 as the ternary Fenton-like catalyst: Optimization, characterization and catalytic mechanism

The rational design and synthesis of novel nanocomposites as effective heterogeneous catalysts is meaningful for the advances in Fenton-like technology. Herein, multiple variants of three-dimensional reduced graphene oxide wrapped nZVI doped with Al₂O₃ (3D-RGO@nZVI/Al₂O₃) were prepared by three different self-assembly methods. The composites were characterized by field emission scanning electron microscopy, nitrogen adsorption/desorption isotherms, Raman spectrum analysis, X-ray diffraction, and X-ray photoelectron spectroscopy. A series of experiments on chloramphenicol degradation at different pH values were employed to evaluate the catalytic properties of the prepared catalysts. With the systematical investigation of their morphologies, chemical components and catalytic performance, the optimal 3D-RGO@nZVI/Al₂O₃ catalyst was synthesized, which was favorable for inducing the Fenton-like reaction by activation of dissolved oxygen (DO) within a wide pH range. The anchored nZVI particles were the main active sites for catalytic oxidation, and doped Al³⁺ played a major role in buffering the pH of CAP solution. Electron spin resonance spectroscopy revealed the existence of the superoxide radicals (·O₂^-) and singlet oxygen (¹O₂), which provides a new insight into the reaction mechanism of reactive oxygen species in the Fenton-like system. This work is an essential effort to explore the promoting effect of synthesis methods on the catalytic behavior of catalysts, and to further study the Fenton-like reaction triggered by DO activation.

Removal of Polycyclic Aromatic Hydrocarbons in a Heterogeneous Fenton Like Oxidation System Using Nanoscale Zero-Valent Iron as a Catalyst

Oil and gas effluents contains highly toxic and harmful organic pollutants. Therefore, it is necessary to eliminate and/or reduced the concertation of organic pollutants to a technologically acceptable levels before their discharge into water streams. This study investigates the application of nanoscale zero-valent iron (nZVI), and hydrogen peroxide (H2O2) for removal of organic pollutants from real oily produced water. Batch studies were performed and effect of different operating parameters, including concentration of nZVI and H2O2, pH and reaction time were studied. Moreover, optimization of independent variables was performed using central composite design (CCD) in response surface methodology (RSM). The experimental set up provided maximum removal efficiencies of 89.5% and 75.3% for polycyclic aromatic hydrocarbons (PAHs) and chemical oxygen demand (COD), respectively. The optimum values of independent variables such as concentrations of nZVI, and H2O2, contact time and pH were obtained as 4.35 g/L, 1.60 g/L, 199.9 min and 2.9, respectively. Predicted PAHs and COD removal efficiencies at the optimum values of independent variables were found as 89.3% and 75.7%, respectively which are in line with the experimental values. The study indicates that application of heterogeneous Fenton like oxidation system using nZVI as a catalyst is an efficient treatment method for removal of organic pollutants from real produced water.

Enhanced heterogeneous Fenton-like degradation of nuclear-grade cationic exchange resin by nanoscale zero-valent iron: experiments and DFT calculations

Nanoscale zero-valent iron (nZVI) was prepared and used as a heterogeneous Fenton-like catalyst for the degradation of nuclear-grade cationic exchange resin. The properties of nZVI before and after reaction were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) surface area analysis. The results showed that nZVI-H₂O₂ system exhibited the enhanced degradation of cationic resins, compared with Fe²⁺-H₂O₂, Cu⁰-H₂O₂, and Fe⁰/Cu⁰-H₂O₂ systems. The effects of initial temperature, nZVI dose, and H₂O₂ concentration were studied, and the higher temperature and nZVI dose with relatively low H₂O₂ concentration brought faster degradation rate. The degradation of cationic resins followed the pseudo-first-order kinetics with the apparent activation energy of 53.29 kJ/mol. According to the experimental and calculated infrared and UV-visible spectra, the carbon skeleton of cationic resins was broken with the detachment of benzene ring and the desulfonation of resin polymer by hydroxyl radicals (•OH), generating long-chain alkenes. These intermediates were further oxidized through the hydroxyl substitution, hydrogen abstraction, ring cleavage, or carbonylation reactions, finally forming carboxylic acids remained in solution.

A novel Poly(vinyl alcohol) / carboxymethyl cellulose / yeast double degradable hydrogel with yeast foaming and double degradable property

A novel polyvinyl alcohol/carboxymethyl cellulose/yeast double degradable hydrogel was prepared with yeast as a foaming agent. The chemical structure of the hydrogel was characterized by FTIR and XPS. The micro-structure of the hydrogel was observed by SEM. The specific surface area and pore size of hydrogel were measured by BET. Methylene blue adsorption capacity of the hydrogels were investigated and the adsorption mechanism was explored. The biodegradability of double degradable hydrogel was investigated. The results showed that yeast was encapsulated in hydrogel by electrostatic action. With the addition of yeast, not only the specific surface area and average pore size of the hydrogel increased but also methylene blue maximum adsorption capacity of the double degradable hydrogel (110 ± 3.5 mg/g) was significantly higher than that of the hydrogel without yeast (57 ± 1.9 mg/g). The adsorption mechanism was dominated by chemical adsorption and was accompanied by biodegradable and electrostatic adsorption. The kinetic data were fitted to the pseudo-second-order kinetic model reasonably well. The introduction of yeast promoted the biodegradable of hydrogel and increased the degradation rate of polyvinyl alcohol in the material with a maximum degradation rate of 45 ± 2.8%.