A highly efficient TiOX (X = N and P) photocatalyst for inactivation of Microcystis aeruginosa under visible light irradiation

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative. In the recent past, literature has been modified extensively with a decisive knowledge regarding algal invasion, desired preparation of nanomaterials with enhanced visible light absorption capacity and mechanisms for algal cell denaturation. The motivation behind this review article was to gather algal inactivation data in a systematic way based on various research studies, including the construction of nanoparticles and purposely to test their anti-algal activities under visible irradiation. Additionally, this article mentions variety of starting materials employed for preparation of various nano-powders with focus on their synthesis routes, analytical techniques as well as proposed mechanisms for lost cellular integrity in context of reduced chlorophyll' a' level, cell rapture, cell leakage and damages to other physiological constituents; credited to oxidative damage initiated by reactive oxidation species (ROS). Various floating and recyclable composited catalysts Ag2CO3-N: GO, Ag/AgCl@ZIF-8, Ag2CrO4-g-C3N4-TiO2/mEP proved to be game-changers owing to their enhanced VL absorption, adsorption, stability, separation and reusability. An outlook for the generalized limitations of published reports, cost estimations for practical implementation, issues and challenges faced by nano-photocatalysts and possible opportunities for future studies are also proposed. This review will be able to provide vast insights for coherent fabrication of catalysts, breakthroughs in experimental methodologies and help in elaboration of damage mechanisms.

Recent progress and prospect of graphitic carbon nitride-based photocatalytic materials for inactivation of Microcystis aeruginosa

The proliferation of harmful algal blooms is a global concern due to the risk they pose to the environment and human health. Algal toxins which are hazardous compounds produced by dangerous algae, can potentially kill humans. Researchers have been drawn to photocatalysis because of its clean and energy-saving properties. Graphite carbon nitride (g-C3N4) photocatalysts have been extensively studied for their ability to eliminate algae. These photocatalysts have attracted notice because of their cost-effectiveness, appropriate electronic structure, and exceptional chemical stability. This paper reviews the progress of photocatalytic inactivation of harmful algae by g-C3N4-based materials in recent years. A brief overview is given of a number of the modification techniques on g-C3N4-based photocatalytic materials, as well as the process of inactivating algal cells and destroying their toxins. Additionally, it provides a theoretical framework for future research on the eradication of algae using g-C3N4-based photocatalytic materials.

Antibacterial and sunlight-driven photocatalytic activity of graphene oxide conjugated CeO2 nanoparticles

This work focuses on the structural, morphological, optical, photocatalytic, antibacterial properties of pure CeO2 nanoparticles (NPs) and graphene oxide (GO) based CeO2 nanocomposites (GO-1/CeO2, GO-5/CeO2, GO-10/CeO2, GO-15/CeO2), synthesized using the sol-gel auto-combustion and subsequent sonication method, respectively. The single-phase cubic structure of CeO2 NPs was confirmed by Rietveld refined XRD, HRTEM, FTIR and Raman spectroscopy. The average crystallite size was calculated using Debye Scherrer formula and found to increase from 20 to 25 nm for CeO2 to GO-15/CeO2 samples, respectively. The related functional groups were observed from Fourier transform infrared (FTIR) spectroscopy, consistent with the outcomes of Raman spectroscopy. The optical band gap of each sample was calculated by using a Tauc plot, which was observed to decrease from 2.8 to 1.68 eV. The valence state of Ce (Ce3+ and Ce4+) was verified using X-ray photoelectron spectroscopy (XPS) for CeO2 and GO-10/CeO2. The poisonous methylene blue (MB) dye was used to evaluate the photocatalytic activity of each sample in direct sunlight. The GO-15/CeO2 nanocomposite showed the highest photocatalytic activity with rate constant (0.01633 min-1), and it degraded the MB dye molecules by 100% within 120 min. The high photocatalytic activity of this material for degrading MB dye establishes it as an outstanding candidate for wastewater treatment. Further, these nanocomposites also demonstrated excellent antimicrobial activity against Pseudomonas aeruginosa PAO1.

Nanoparticles for Mitigation of Harmful Cyanobacterial Blooms

With the rapid advancement of nanotechnology and its widespread applications, increasing amounts of manufactured and natural nanoparticles (NPs) have been tested for their potential utilization in treating harmful cyanobacterial blooms (HCBs). NPs can be used as a photocatalyst, algaecide, adsorbent, flocculant, or coagulant. The primary mechanisms explored for NPs to mitigate HCBs include photocatalysis, metal ion-induced cytotoxicity, physical disruption of the cell membrane, light-shielding, flocculation/coagulation/sedimentation of cyanobacterial cells, and the removal of phosphorus (P) and cyanotoxins from bloom water by adsorption. As an emerging and promising chemical/physical approach for HCB mitigation, versatile NP-based technologies offer great advantages, such as being environmentally benign, cost-effective, highly efficient, recyclable, and adaptable. The challenges we face include cost reduction, scalability, and impacts on non-target species co-inhabiting in the same environment. Further efforts are required to scale up to real-world operations through developing more efficient, recoverable, reusable, and deployable NP-based lattices or materials that are adaptable to bloom events in different water bodies of different sizes, such as reservoirs, lakes, rivers, and marine environments.

Effective photocatalytic inactivation of Microcystis aeruginosa by Ag3VO4/BiVO4 heterojunction under visible light

In recent years, photocatalytic technology has been increasingly used for the treatment of algal blooms in water bodies due to its high efficiency and environmental advantages. However, conventional semiconductor materials suffer from high electron-hole recombination rate, low carrier mobility and weak surface adsorption ability, which made their photocatalytic performance limited. Therefore, the photocatalytic performance of the composites can be improved by coupling another semiconductor material to form a heterojunction to accelerate electron transfer. In this study, a novel composite Ag3VO4/BiVO4 (ABV) photocatalyst was successfully prepared by in-situ deposition method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst showed excellent photocatalytic activity, and the degradation rate of M. aeruginosa chlorophyll a was up to 99.8% within 4 h under visible light. During the photocatalytic degradation, the morphology of algae cells, the permeability of cell membrane, the organic matter inside and outside the cells, the antioxidant system and the soluble protein were seriously damaged. Moreover, three cycle experiments showed that the prepared ABV photocatalyst had high reusability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In general, the synthesized ABV photocatalyst can effectively inactivate cyanobacteria under visible light and provided a new method for M. aeruginosa removal in water.

Nanoparticles, an Emerging Control Method for Harmful Algal Blooms: Current Technologies, Challenges, and Perspectives

Harmful algal blooms (HABs) are a global concern because they harm aquatic ecosystems and pose a risk to human health. Various physical, chemical, and biological approaches have been explored to control HABs. However, these methods have limitations in terms of cost, environmental impact, and effectiveness, particularly for large water bodies. Recently, the use of nanoparticles has emerged as a promising strategy for controlling HABs. Briefly, nanoparticles can act as anti-algae agents via several mechanisms, including photocatalysis, flocculation, oxidation, adsorption, and nutrient recovery. Compared with traditional methods, nanoparticle-based approaches offer advantages in terms of environmental friendliness, effectiveness, and specificity. However, the challenges and risks associated with nanoparticles, such as their toxicity and ecological impact, must be considered. In this review, we summarize recent research progress concerning the use of nanoparticles to control HABs, compare the advantages and disadvantages of different types of nanoparticles, discuss the factors influencing their effectiveness and environmental impact, and suggest future directions for research and development in this field. Additionally, we explore the causes of algal blooms, their harmful effects, and various treatment methods, including restricting eutrophication, biological control, and disrupting living conditions. The potential of photocatalysis for generating reactive oxygen species and nutrient control methods using nanomaterials are also discussed in detail. Moreover, the application of flocculants/coagulants for algal removal is highlighted, along with the challenges and potential solutions associated with their use. This comprehensive overview aims to contribute to the development of efficient and sustainable strategies for controlling HAB control.

Inactivation of algae by visible-light-driven modified photocatalysts: A review

Harmful algal blooms have raised great concerns due to their adverse effects on aquatic ecosystems and human health. Recently, visible light-driven (VLD) photocatalysis has attracted attention for algae inactivation owing to its unique characteristics of low cost, mechanical stability, and excellent removal efficiency. However, the low utilization of visible light and the high complexation rate of electron-hole (e^--h⁺) pairs are essential drawbacks of conventional photocatalysts. Scientific efforts have been devoted to modifying VLD photocatalysts to enhance their antialgal activity. This review concisely summarizes the anti-algae performance of the latest modified VLD photocatalysts. The summary of the mechanisms in VLD photocatalytic inactivation demonstrates that reactive oxygen species (ROS) can induce oxidative damage to algal cells and photocatalytic degradation of released organic matter. In addition, the factors, such as photocatalyst dosage, algal concentration and species, and the physicochemical properties of different water matrices, such as pH, natural organic matter, and inorganic ions, affecting the efficacy of VLD catalytic oxidation for algae removal are briefly outlined. Thereafter, this review compiles perspectives on the emerging field of VLD photocatalytic inactivation.

Photocatalytic degradation effect and mechanism of Karenia mikimotoi by non-noble metal modified TiO2 loading onto copper metal organic framework (SNP-TiO2@Cu-MOF) under visible light

In this study, the SNP-TiO₂@Cu-MOF composite was prepared successfully by loading non-noble metal modified TiO₂ (SNP-TiO₂) on the surface of copper metal organic skeleton (Cu-MOF), and compared the inactivation efficiency of different photocatalysts to Karenia mikimotoi (K. mikimotoi) under visible light. The obtained photocatalyst had the characteristic crystal faces of Cu-MOF and SNP- TiO₂, and contained functional groups such as Cu-O, -COOH, N-O, P-O, etc., which indicated the structural stability of the photocatalyst. The band gap of SNP-TiO₂@Cu-MOF composite was 2.82 eV, and it had great light absorption ability in visible light region. It was proved to be a mesoporous adsorption material, which had a huge specific surface area (245 m²/g). Compared with other photocatalysts, SNP-TiO₂@Cu-MOF composite showed the strongest photocatalytic activity. When the concentration of composite material was set to 100 mg/L and the exposure time was 6 h, the visible light photocatalytic inactivation efficiency of K. mikimotoi was 93.75 %. By measuring various metabolic indexes of K. mikimotoi under the action of different photocatalysts for 1 h, it was confirmed that cell inactivation was due to the increased membrane permeability and degradation of photosynthetic pigments and main life proteins. This research showed that SNP-TiO₂@Cu-MOF composite material was full of great potential and application prospect in controlling the outbreak of eutrophication.

A comprehensive review on the photocatalytic inactivation of Microcystis aeruginosa: Performance, development, and mechanisms

Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.

Research progress of photocatalysis for algae killing and inhibition: a review

The healthy development of biodiversity has been threatened frequent water eutrophication. In recent years, photocatalytic technology, which has attracted researchers' attention, not only showed increasing potential in the field of organic pollutant degradation, but also many kinds of photocatalysts were used in the field of red tide pollution control at present, which showed superior ability to inactivate harmful algae and degrade algal toxins. Researches have also explored the mechanisms of photocatalytic algae inhibition. In this study, the current research progress in the field of photocatalytic algae inhibition was systematically discussed from several aspects, such as common types of photocatalysts, modification methods of photocatalysts, types of tested algae for photocatalytic algae inhibition, and action mechanism of inactivated algae cells, so as to provide a certain theoretical basis for further application research of photocatalysts in the field of algae removal in the later period.

The effect of graphene photocatalysis on microbial communities in Lake Xingyun, southwestern China

Graphene photocatalysis is a new method for harmful algae and water pollution control. However, microbial communities undergoing graphene photocatalysis treatment in freshwater lakes have been poorly studied. Here, using 16S rRNA and 18S rRNA gene high-throughput sequencing, the responses of microbial communities to graphene photocatalysis were analyzed in the eutrophic lake, Lake Xinyun, southwestern China. For microeukaryotes, we found that Arthropoda was dominant in summer, while its abundant level declined in spring under natural conditions. The evident reduction of Arthropods was observed after graphene photocatalysis treatment in summer and then reached a relatively stable level. For bacteria, Cyanobacteria decreased in summer due to the graphene photocatalysis-mediated inactivation. However, Cyanobacteria was higher in the treated group in spring with a genera group-shift. Functional analysis revealed that microeukaryotes showed higher potential for fatty acid oxidation and TCA cycle in the treated group in summer, but they were more abundant in control in spring. Pathways of starch and sucrose metabolism and galactose metabolism were more abundant in control in summer, while they were enriched in the treated group in spring for bacteria. This study offers insights into the effects of graphene photocatalysis on microbial communities and their functional potential in eutrophic lake.

The inactivation effects and mechanisms of Karenia mikimotoi by non-metallic elements modified TiO2 (SNP-TiO2) under visible light

As an advanced oxidation technology, photocatalytic treatment of red tide algae pollution was potential of great research prospects. However, the most commonly used photocatalyst TiO₂ can only use ultraviolet light with short wavelength because of its wide band gap. In this study, the non-metallic elements S, N and P were added into the TiO₂ (SNP-TiO₂) lattice by hydrothermal synthesis, and the inactivation effects and mechanisms of Karenia mikimotoi were studied under visible light. The particle size of the obtained photocatalyst was about 10 nm. There were obvious characteristic peaks at the (101) (004) (200) (105) (211) (204) interface and included NO bond, PO bond and SO bond. The incorporation of S, N and P reduced the band gap of TiO₂ from 3.2 eV to 3.08 eV, which showed the integrity of the doping process. S_0.7N_1.4P_0.05-TiO₂ was full of excellent photocatalytic activity, the continuous inhibition effect was the most obvious. When exposed to 200 mg/L for 96 h, the growth inhibition rate (IR) was 81.8%. Photocatalytic process led to membrane damage of algal cells and collapse of photosynthetic system, caused oxidative stress response and accelerated algal cell inactivation. The study indicated that non-metallic elements modified TiO₂ (SNP-TiO₂) was full of potential of in treating red tide outbreak pollution under visible light.

Self-floating photocatalytic hydrogel for efficient removal of Microcystis aeruginosa and degradation of microcystins-LR

Cyanobacterial harmful algal blooms (CyanoHABs) and the release of cyanotoxins have posed adverse impacts to aquatic system and human health. In this study, a novel self-floating Ag/AgCl@LaFeO₃ (ALFO) photocatalytic hydrogel was prepared via freeze-thaw method for removal of Microcystis aeruginosa (M. aeruginosa). The ALFO hydrogel performed an excellent photocatalytic activity with a 99.4% removal efficiency of chlorophyll a within 4 h. It can still remove above 95% chlorophyll a after six consecutive recycles. Besides it has also shown excellent mechanical strength and elasticity, which can ensure its use in practical applications. The mechanisms of M. aeruginosa inactivation are attributed to •O₂^- and •OH generated by the ALFO hydrogel under visible light radiation. In addition, •O₂^- and •OH can further oxidative degrade and even mineralize the leaked algae organic matter, avoiding the recurrence of CyanoHABs. What's more, the ALFO hydrogel owns good photocatalytic degradation performance for microcystins-LR (MC-LR) with a 97% removal efficiency within 90 min. A possible photocatalytic degradation pathway of MC-LR was proposed through the identification of the intermediate products during the photocatalytic reaction, which confirmed the reduction of MC-LR toxicity. This work develops recyclable a self-floating ALFO hydrogel to simultaneously inactivate M. aeruginosa and degrade MC-LR, providing a prospective method for governing and controlling CyanoHABs in practical application.

Efficient elimination of the pollutants in eutrophicated water with carbon strengthened expanded graphite based photocatalysts: Unveiling the synergistic role of metal sites

Metal sites (Ni, Bi or Ag) were introduced into carbon strengthened expanded graphite (CEG) based photocatalysts, and performed as a novel strategy to enhance the elimination of Microcystis aeruginosa and microcystin-LR from water. Results show that metal doping can efficiently improve the adsorption of harmful algae and enhance the photocatalytic activities in inactivation of harmful algae and degradation of MC-LR. Among the CEG catalysts, Ni-CEG can achieve the highest removal rate up to 90.6% for algal cells with 5 h visible light irradiation, while Bi-CEG catalyst provides the best performance for MC-LR degradation with the removal rate of 80.9% in 6 h visible light irradiation. In general, considering the coexistence of algal cells and microcystin-LR, Bi-CEG is proved to be an excellent candidate for the remediation of eutrophicated waters since it can achieve the efficient removal of both harmful algae and MC-LR. DFT calculations indicate that metal doping can transform the photocatalysts into n-type semiconductor, and provide the mid-gap state. In addition, the partial charge density distribution near Fermi level was mainly composed by the metal dopants, which can enhance the interaction with harmful algae and MC-LR.

Efficient integration of plasmonic Ag/AgCl with perovskite-type LaFeO3: Enhanced visible-light photocatalytic activity for removal of harmful algae

A novel plasmonic Ag/AgCl@LaFeO₃ (ALFO) photocatalyst was successfully synthesized by a simple in-situ synthesis method with enhanced photocatalytic activity under visible light for harmful algal blooms (HABs) control. The structure, morphology, chemical states, optical and electrochemical properties of the photocatalyst were systematically investigated using a series of characterization methods. Compared with pure LaFeO₃ and Ag/AgCl, ALFO-20% owned a higher light absorption capacity and lower electron-hole recombined rate. Therefore, ALFO-20% had higher photocatalytic activity with a near 100% removal rate of chlorophyll a within 150 min, whose kinetic constant was 15.36 and 9.61 times faster than those of LaFeO₃ and Ag/AgCl. In addition, the changes of zeta potential, cell membrane permeability, cell morphology, organic matter, total soluble protein, photosynthetic system and antioxidant enzyme system in Microcystis aeruginosa (M. aeruginosa) were studied to explore the mechanism of M. aeruginosa photocatalytic inactivation. The results showed that ALFO-20% could change the permeability and morphology of the algae cell membrane, as well as destroy the photosynthesis system and antioxidant system of M. aeruginosa. What's more, ALFO could further degrade the organic matters flowed out after algae rupture and die, reducing the secondary pollution and avoiding the recurrence of HABs. Finally, the species of reactive oxygen species (ROS) (mainly •O₂^- and •OH) produced by ALFO were determined through quenching experiments, and a possible photocatalytic mechanism was proposed. Overall, ALFO can efficiently remove the harmful algae under the visible light, providing a promising method for controlling HABs.

Anti-algal activity of a fluorine-doped titanium oxide photocatalyst against Microcystis aeruginosa and its photocatalytic degradation

Fluorine-doped TiO2 was successfully synthesised and applied as algaecide. Studies on algae removal efficiencies and mechanisms illustrated that F-TiO2 was suitable for algae elimination in natural water bodies.

Effective inactivation of Microcystis aeruginosa by a novel Z-scheme composite photocatalyst under visible light irradiation

Microcystis aeruginosa is one of the most famous harmful algae. In this work, Z-scheme g-C₃N₄-MoO₃ (Mo-CN) composite photocatalysts were successfully synthesized to alleviate the algae pollution. The obtained composites exhibited excellent performance for the inactivation of M. aeruginosa. The optimal photocatalysts (15Mo-CN) achieved a removal efficiency of 97% for the algal cells after 3 h visible light irradiation, which was attributed to their remarkable surface properties and ingenious structure design. The physiological status of Microcystis aeruginosa were evaluated by the chlorophyll a (chla), relative electron transport rate (rETR) and maximum photochemical efficiency (Fv/Fm), and all of them decreased in different degrees. Furthermore, the as-prepared photocatalysts also show a certain activity for the removal of leaked macromolecule organic compounds during the process of algal cells inactivation. Finally, a possible mechanism on the photocatalytic inactivation of algal cells by the Z-scheme photocatalysts was deduced based on the experimental and characterization results. We believe this study would provide new insights into the development of promising technology and basic theory for remediation of algae pollution.

Photocatalytic degradation of microcystin-LR by modified TiO2 photocatalysis: A review

Microcystin-LR (MC-LR), the most toxic and commonly encountered cyanotoxin, is produced by harmful cyanobacterial blooms and potentially threatens human and ecosystems health. Titanium dioxide (TiO₂) photocatalysis is attracting growing attention and has been considered as an efficient, environmentally friendly and promising solution to eliminate MC-LR in the aquatic ecosystems. Over recent decades, scientific efforts have been directed towards the understanding of fundamentals, modification strategies, and application potentials of TiO₂ photocatalysis in degrading MC-LR. In this article, recent reports have been reviewed and progress has been summarized in the development of heterogeneous TiO₂-based photocatalysts for MC-LR photodegradation under visible, UV, or solar light. The proposed photocatalytic principles of TiO₂ and destruction of MC-LR have been thoroughly discussed. Specifically, some main modification methods for improving the drawbacks and performance of TiO₂ nanoparticle were highlighted, including element doping, semiconductor coupling, immobilization, floatability amelioration and magnetic separation. Moreover, the performance evaluation metrics quantum yield (QY) and figure of merit (FOM) were used to compare different photocatalysts in MC-LR degradation. The best performance was seen in N-TiO₂ with QY and FOM values of 2.20E-07 molecules/photon and 1.00E-11 mol·L/(g·J·h). N-TiO₂ or N-TiO₂-based materials may be excellent options for photocatalyst design in terms of MC-LR degradation. Finally, a summary of the remaining challenges and perspectives on new tendencies in this exciting frontier and still an emerging area of research were addressed accordingly. Overall, the present review will offer a deep insight for understanding the photodegradation of MC-LR with modified TiO₂ to further inspire researchers that work in associated fields.

Simultaneous removal of harmful algal cells and toxins by a Ag2CO3-N:GO photocatalyst coating under visible light

The frequent harmful algae blooms (HABs) in eutrophic waters pose serious threats to the water environment and health of human beings and animals. In this study, a new type of photocatalytic coating was prepared by loading Ag₂CO₃-N:GO (AGON) on the polyurethane sponge modified by silica sol via a dip coating method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) and degradation of Microcystin-LR (MC-LR). The factors including photocatalyst loading dosage, natural organic matter (NOM), and alkalinity were studied. The effects on the physiological characteristics of M. aeruginosa and reactive oxygen species (ROS) were also investigated to reveal the photocatalytic inactivation mechanisms. The results showed that the AGON coating-4 (the initial concentration of AGON suspension used for loading is 4 g/L) exhibited the optimum photocatalytic performance under visible light, which can completely remove chlorophyll a after 5 h of irradiation. And the NOM and alkalinity in water have relatively negative effects on the photocatalytic inactivation of algae. The prepared AGON coating also exhibited excellent photocatalytic performance in the degradation of MC-LR under visible light. It only needed 20, 60 and 120 min to completely degrade 0.1, 0.3 and 0.5 mg/L MC-LR, respectively. However, the mixed systems of algae and MC-LR required a longer time to achieve photocatalytic degradation. The O₂^- were the predominant reactive oxygen species, causing the damage of cell membranes and walls and the leakage of cellular content, which eventually led to the irreversible damage to algal cells. What's more, the coating can be reused several times due to its good cyclability and stability. Therefore, the AGON coating has promising prospects for the treatment of algal blooms in eutrophic waters.