Enhanced visible light photocatalytic degradation of acetaminophen with Ag2S-ZnO@rGO core-shell microsphere as a novel catalyst: Catalyst preparation and characterization and mechanistic catalytic experiments

Photocatalytic Degradation of Acetaminophen in Aqueous Environments: A Mini Review

Over the past few decades, acetaminophen (ACT), a typical nonsteroidal anti-inflammatory drug (NSAID), has gained global usage, positioning itself as one of the most extensively consumed medications. However, the incomplete metabolism of ACT leads to a substantial discharge into the environment, classifying it as an environmental contaminant with detrimental effects on non-target organisms. Various wastewater treatment technologies have been developed for ACT removal to mitigate its potential environmental risk. Particularly, photocatalytic technology has garnered significant attention as it exhibits high efficiency in oxidizing and degrading a wide range of organic pollutants. This comprehensive review aims to systematically examine and discuss the application of photocatalytic technology for the removal of ACT from aqueous environments. Additionally, the study provides a detailed overview of the limitations associated with the photocatalytic degradation of ACT in practical applications, along with effective strategies to address these challenges.

Boosted visible-light-driven degradation over stable ternary heterojunction as a plasmonic photocatalyst: Mechanism exploration, pathway and toxicity evaluation

The incorporation of plasmonic metals into semiconductors forming heterojunction photocatalysts is a promising route to enhance the photocatalytic performance in visible light. In this work, we reported the visible-light-driven one-dimensional (1D) nanostick silver/silver sulfide (Ag/Ag₂S) photocatalyst combining with two-dimensional (2D) nanosheet reduced graphene oxide intersected by hollow structure (h-RGO) was prepared via a feasible approach at room temperature. The density of Ag depositing on the surface of Ag₂S was easily tuned by the concentration of sodium borohydride and the silicon dioxide nanospheres were employed as templates in the preparation of h-RGO by the layer-by-layer (LBL) assembly. The ternary plasmonic Ag/Ag₂S/h-RGO photocatalysts exhibited better photocatalytic performance for degradation of naphthalene (95.95%) and 1-naphthol (98.65%) under visible light than the pure Ag₂S, composite Ag/Ag₂S and composite Ag/Ag₂S/RGO. Localized surface plasmon resonance of Ag, heterojunction formed between Ag/Ag₂S and RGO and the unique characteristics of h-RGO, which included higher specific surface areas, more efficient reflections of light and more active sites than RGO for boosting separation efficiency of charge carriers, were all responsible for such enhancement. By combining the characterization results with various computations, the mechanism, potential degradation pathways and the toxicity of the generated intermediates for photodegradation were examined. In addition to offering profound insight into the expansion of effective plasmonic photocatalysts with novel structures, the current study is beneficial to ease the environmental crisis to a certain extent.

Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors.

Development of Ag/Ag2O/ZnO photocatalyst and their photocatalytic activity towards dibutyl phthalate decomposition in water

The photocatalyst Ag/Ag₂O-modified ZnO, fabricated by a simple one-step calcination method, was applied into the degradation of organic pollutant dibutyl phthalate (DBP). Ag/ZnO and Ag₂O/ZnO were prepared as a reference comparison. The prepared catalysts were evaluated by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), BET surface area measurement, and photoluminescence spectra (PL) and UV-Vis diffuse reflectance spectroscopy (DRS) and electrochemical measurements. After the irradiation with ultraviolet light (352 nm), the solution was sampled and subjected to HPLC to evaluate the degradation efficiency of DBP. Ag/Ag₂O/ZnO showed the best results with the excellent degradation of DBP. Ag/Ag₂O/ZnO was four times more efficient, relative to zinc oxide alone. According to photocatalyst characterization, the total pore volume of photocatalyst was improved by loading Ag and Ag₂O, suggesting an increase in the active sites. Also, the efficient electron transfer of Ag/Ag₂O/ZnO was mainly responsible for the enhanced activity. The reaction mechanism for Ag/Ag₂O/ZnO was determined to become a Z-scheme. From the radical scavenger tests, the main active species was identified as superoxide radicals. The stability of Ag/Ag₂O/ZnO could be confirmed after five cycling reutilization. It was found from the radical scavenger test that •O₂ ^- play an important role as the main reactive species in the photocatalytic degradation of DBP. Consequently, Ag/Ag₂O/ZnO with a simple fabrication method seems to become one of the powerful photocatalyst for the photocatalytic degradation of organic pollutant in water.Implications: This study discusses the usefulness of Ag/Ag₂O/ZnO composites. This photocatalyst could be an approach to solve the environmental pollution caused by organic pollutants, which is a growing problem all over the world. In addition, the highly efficient photocatalyst Ag/Ag₂O/ZnO is an inexpensive and reusable catalyst with great practical potential.Furthermore, to the best of our knowledge, there are very few reports that have examined the combination of Ag, Ag₂O and ZnO. In addition, the photocatalytic mechanism has not been understood. Here, we introduce Ag into Ag₂O/ZnO to improve the photocatalytic performance and photostability, enhance the activity, and elucidate the mechanism of Ag/Ag₂O/ZnO.

TiO2-Acetylacetone as an Efficient Source of Superoxide Radicals under Reduced Power Visible Light: Photocatalytic Degradation of Chlorophenol and Tetracycline

Visible light-sensitive TiO2-based nanomaterials are widely investigated for photocatalytic applications under high power (≥300 W) UV and visible light. The formation of charge transfer complexes (CTCs) between bidentate ligands and nanocrystalline TiO2 promotes visible light absorption and constitutes a promising alternative for environmental remediation under reduced visible light power. However, the efficiency of photodegradation, the volatilization profile of bidentates, and the role of reactive oxidizing species (ROS) are not fully understood. In this study, thermogravimetric analyses coupled with mass spectroscopy (TGA-MS) were performed on TiO2-Acetylacetone (ACAC) CTC. TiO2-ACAC CTC calcined at 300 °C (TiO2-A300) was applied for the photocatalytic degradation of chlorophenol (4-CP) and tetracycline (TC) under low power visible light (26 W). Furthermore, the ROS scavengers isopropanol and benzoquinone were added for studying the photocatalytic role of •OH and •O2− radicals. The TGA-MS showed the release of ACAC fragments, such as ethyl ions and acetone, in the range between 150 °C and 265 °C, while between 300 °C and 450 °C only CO2 and H2O were released during oxidation of ACAC. The photocatalytic abatement of tetracycline (68.6%), performed by TiO2-A300, was ~two times higher than that observed for chlorophenol (31.3%) after 6 h, indicating a distinct participation of ROS in the degradation of these pollutants. The addition of the ROS scavenger revealed •O2− radicals as primarily responsible for the high efficiency of TiO2-ACAC CTC under reduced visible light. On the other hand, the •OH radicals are not efficiently generated in the CTC. Therefore, the development of heterostructures based on TiO2-ACAC CTC can increase the generation of ROS through coupling with semiconductors capable of generating •OH under visible light.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Novel organic assisted Ag-ZnO photocatalyst for atenolol and acetaminophen photocatalytic degradation under visible radiation: performance and reaction mechanism

This study is on photocatalytic degradation of pharmaceutical residues of atenolol (ATL) and acetaminophen (ACT) present in secondary effluent under visible light irradiation stimulated by Ag doped ZnO (Ag-ZnO) photocatalyst. Lawsonia inermis leaf extract was used for reduction of Zinc sulphate to ZnO nanoparticles (NPs). Further, ZnO NPs were doped with Ag and characterized by XRD, FT-IR, SEM-EDX, surface area analyzer, UV-Vis, and photoluminescence spectrometry to analyze the structure, morphology, chemical composition, and optical property. FT-IR analysis revealed major functional groups such as OH, C=O, and SEM analysis depicted the polyhedron shape of the NPs with size range of 100 nm. Ag-ZnO NPs were used in the photocatalytic degradation of ATL and ACT, and its removal was evaluated by varying initial contaminant concentration, catalyst dosage, and initial pH. Findings indicate that Ag-ZnO NPs demonstrated relative narrow bandgap and efficient charge separation that resulted in enhanced photocatalytic activity under visible light illumination. The photocatalytic degradation of ATL and ACT fitted well with pseudo-first-order kinetic model. Further, it was found that under optimal conditions of 5 mg/L of contaminants, pH of 8.5, and catalyst dose of 1 g/L, degradation efficiency of 70.2% (ATL) and 90.8% (ACT) was achieved for a reaction time of 120 min. More than 60% reduction in TOC was observed for both contaminants and OH• pathway was found to be the major removal process. Ag-ZnO photocatalyst showed good recycling performance, and these findings indicate that it could be cost effectively employed for removing emerging contaminants under visible light radiation.

Efficient solar removal of acetaminophen contaminant from water using flexible graphene composites functionalized with Ni@TiO2:W nanoparticles

This work presents the morphological, structural and photocatalytic properties of flexible graphene composites decorated with Ni@TiO₂:W nanoparticles (TiNiW NPs) with an average size of 27 ± 2 nm. The TiNiW NPs were immobilized on the surface of a flexible graphene composite using a PVA-based slurry-paste (FG/TiNiW composite). The SEM study showed that the TiNiW NPs remained exposed on the surface of the FG/TiNiW composite, which benefited its photocatalytic activity. The photocatalytic performance for the degradation of acetaminophen (ACT) was evaluated using both the TiNiW powders and the FG/TiNiW composite, obtaining maximum degradation efficiencies of 100 and 86%, respectively, after 3 h under natural solar irradiation. The degradation of ACT was caused mainly by the reactive oxygen species such as OH radicals and h⁺, which was confirmed by scavenger experiments. Photoluminescence, XPS and absorbance experiments revealed that oxygen vacancy defects were created by i) doping the TiNiW NPs with W and by ii) introducing graphene into the composites. These defects enhanced the absorbance of light in the range of 400-800 nm, which in turn, promoted the photocatalytic degradation of ACT. Moreover, the reuse experiments confirmed that both the TiNiW NPs and FG/TiNiW composite were very stable for the degradation of ACT, since degradation efficiencies >82% were obtained after 4 reuse cycles for both photocatalysts. The experimental findings of this work demonstrate that the flexible TiO₂/graphene composites are a feasible option for the removal of pharmaceutical contaminants from water using natural solar irradiation.

One-Pot Sonochemical Synthesis of ZnO Nanoparticles for Photocatalytic Applications, Modelling and Optimization

This present study proposed a successful one pot synthesis of zinc oxide nanoparticles (ZnO NPs) and their optimisation for photocatalytic applications. Zinc chloride (ZnCl2) and sodium hydroxide (NaOH) were selected as chemical reagents for the proposed study. The design of this experiment was based on the reagents' amounts and the ultrasonic irradiations' time. The results regarding scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy confirmed the presence of ZnO NPs with pure hexagonal wurtzite crystalline structure in all synthesised samples. Photocatalytic activity of the developed samples was evaluated against methylene blue dye solution. The rapid removal of methylene blue dye indicated the higher photocatalytic activity of the developed samples than untreated samples. Moreover, central composite design was utilised for statistical analysis regarding the obtained results. A mathematical model for the optimisation of input conditions was designed to predict the results at any given point. The role of crystallisation on the photocatalytic performance of developed samples was discussed in detail in this novel study.