Photodegradation performance and transformation mechanisms of sulfamethoxazole by porous g-C3N4 modified with ammonia bicarbonate

Degradation pathways of sulfamethoxazole under phototransformation processes: A data base of the major transformation products for their environmental monitoring

Sulfamethoxazole (SMX) is frequently detected in wastewater and aquatic environments worldwide at concentrations from ng L-1 to μg L-1. Unfortunately, SMX is not completely removed in municipal wastewater treatment plants (WWTPs), thus, SMX and their transformation products (TPs) are discharged into aquatic environments, where can be transformed by phototransformation reactions. In this study, the phototransformation of SMX as well as generation of their major TPs under photolysis and photocatalysis processes was reviewed. SMX can be totally removed under photolysis and photocatalysis processes in aqueous solutions using simulated or natural radiation. Degradation pathways such as isomerization, hydroxylation, fragmentation, nitration, and substitution reactions were identified during the generation of the major TPs of SMX. Particularly, 26 TPs were considered for the creation of a data base of the major TPs of SMX generated under phototransformation processes. These 26 compounds could be used as reference during the SMX monitoring both wastewater and water bodies, using analytic methodologies such as target analysis and suspect screening. A data base of the major TPs of pharmaceuticals active compounds (PhACs) as SMX could help to implementation of best environmental monitoring programs for the study of the environmental risks both PhACs and their TPs with highest occurrence in aquatic environments.

Hydrolysis of sulfamethoxazole in the hyporheic zone: kinetics, factors and pathways

ABSTRACTIt is unknown how antibiotics would behave after entering the hyporheic zone (HZ), which is an area where groundwater and surface water alternate continuously. In this study, the hydrolysis process in the HZ was investigated based on the intermediates identified by HPLC-Q-TOF-MS and FTIR, and the active sites of sulfamethoxazole (SMX) were predicted by density functional theory (DFT). The results showed that the hydrolysis rate of SMX during surface water recharged groundwater reached 38.94%, and the contribution rate of hydroxyl radicals reached 48.35%. In neutral and alkaline environments, SMX hydrolysed more quickly. This is due to the fact that ·OH, as the main precursor of OH-, is much higher in quantity under alkaline conditions. Inorganic anions such as NO3-, HCO3- and CO 3 2 - may inhibit the hydrolysis of SMX by eliminating the reactive oxygen species generated in the HZ. In the process of groundwater recharging to surface water, the concentration of dissolved oxygen (DO) and the rate of SMX hydrolysis gradually reduced. Nitrification, hydroxylation and polymerisation are the main hydrolysis pathways of SMX. The hydrolysis products of SMX in the HZ are more plentiful and have a higher hydrolysis rate compared to the single oxygen environment. The study on the hydrolysis mechanism of SMX in this paper will provide a theoretical basis for the treatment of antibiotic pollution.

New insights into Co3O4-carbon nanotube membrane for enhanced water purification: Regulated peroxymonosulfate activation mechanism via nanoconfinement

Co-based peroxymonosulfate (PMS) activation system with fascinating catalytic performance has become a promising technology for water purification, but it always suffers from insufficient mass transfer, less exposed active sites and toxic metal leaching. In this work, a carbon nanotube membrane confining Co3O4 inside (Co3O4-in-CNT) was prepared and was coupled with PMS activation (catalytic membrane process) for sulfamethoxazole (SMX) removal. Compared with counterpart with surface-loaded Co3O4 (Co3O4-out-CNT), the Co3O4-in-CNT catalytic membrane process exhibited enhanced SMX removal (99.5% vs. 89.1%) within residence time of 2.89 s, reduced Co leaching (20 vs. 147 μg L-1) and more interestingly, the nonradical-to-radical mechanism transformation (from 1O2 and electron transfer to SO4•- and •OH). These phenomena were ascribed to the nanoconfinement effect in CNT, which enhanced mass transfer (2.80 × 10-4 vs. 5.98 × 10-5 m s-1), accelerated Co3+/Co2+ cycling (73.4% vs. 65.0%) and showed higher adsorption energy for PMS (cleavage of O-O bond). Finally, based on the generated abundant reactive oxygen species (ROS), the seven degradation pathways of SMX were formed in system.

Various species of Basidiomycota fungi reveal different abilities to degrade pharmaceuticals and also different pathways of degradation

The presence of pharmaceuticals (PhACs) in the aquatic environment is an emerging problem worldwide. PhACs reach surface water via the effluents of wastewater treatment plants (WWTPs). WWTPs, although able to remove organic pollutants, do not always remove PhACs. Currently, in the treatment of sewage with the activated sludge method, numerous microorganisms are used, mostly bacteria. Nevertheless, these microorganisms are not resistant to many drug contaminants, and some may also pose a risk to human health. White-rot fungi (WRF), which degrade a wide spectrum of environmental pollutants, may be used as an alternative to microorganisms. However, little data exists comparing the removal of various PhACs by different WRF. In this study, we aimed to determine the ability of three WRF Basidiomycota species, Armillaria mellea, Phanerochaete chrysosporium, and Pleurotus ostreatus, to remove PhACs from various therapeutic groups over the course of 1 h-4 days. Additionally, we identified the fungal metabolites of PhACs, proposed the degradation pathways, and assessed the toxicity of the post-culture media. All selected WRF removed PhACs, but the degree of removal depended on WRF species and PhACs type. Antidepressants and immunosuppressants were removed most efficiently by P. ostreatus, cardiovascular drugs and sulfamethoxazole by A. mellea, and erythromycin by P. chrysosporium. The vast differences observed highlight the need for more intensive testing of different WRF species to select the best species for removing pharmaceuticals of interest. The structure of metabolites generated during degradation strongly depended on WRF species, but the most frequent xenobiotic transformations were oxidation and dealkylation. The obtained results gave insight into the substrate specificity of selected WRF while also providing a broad extension of the knowledge of pharmaceutical degradation by A. mellea.

Enhanced sulfamethoxazole photodegradation by N-SrTiO3/NH4V4O10 S-scheme photocatalyst: DFT calculation and photocatalytic mechanism insight

In this study, we synthesized a N-SrTiO₃/NH₄V₄O₁₀ S-scheme photocatalyst by modifying NH₄V₄O₁₀ nanosheets with various proportions of N-doped SrTiO₃ nanoparticles using a mild hydrothermal method.Density Functional Theory(DFT) calculations were employed to elucidate thephotocatalytic mechanism, while the electron-hole transfer and separation of the S-type heterojunction were further characterized experimentally. The photocatalyst was applied to the photodegradation of sulfamethoxazole (SMX), a common water pollutant. Among all the prepared photocatalysts, 30 wt% N-SrTiO₃/NH₄V₄O₁₀ (NSN-30) displayed the highest photocatalytic performance. This was attributed to the facile electron transfer mechanism of the S-scheme heterojunction, which facilitated the effective separation of electron-holes and preserved the strong redox property of the catalyst. The possible intermediates anddegradation pathwaysin thephotocatalytic systemwere explored usingelectron paramagnetic resonance(EPR) and DFT calculations. Our findings demonstrate the potential of semiconductor catalysts to remove antibiotics from aqueous environments usinggreen energy.

Reconstruction of Electronic Structure of MOF-525 via Metalloporphyrin for Enhanced Photoelectro-Fenton Process

Photoelectro-Fenton (PEF) process can continuously promote the occurrence of Fenton reaction and the generation of active species, which is an advanced oxidation technology for pollutant degradation. However, the lack of bifunctional catalysts restricts the development of PEF technology. In this study, the electronic rearrangement MOF-525 modified by metalloporphyrin (named MOF-525-Fe/Zr) was prepared, to load on the carbon felt as a novel cathode catalyst, which is used in PEF process. A series of characterization and photoelectric chemical properties tests combined with DFT calculation showed that the modification of MOF-525 could not only have the large specific surface area and multistage pore structure but also co-stimulate the metal-to-ligand charge transfer (MLCT) and ligand-to-cluster charge transfer (LCCT) by photoelectric synergy. These charge transitions provide periodic electron donor-acceptor conduction paths in MOF-525-Fe/Zr, which can improve the active species formation and transfer efficiency. Owing to their favorable pore and electronic structure as well as stability, MOF-525-Fe/Zr shows great promise for the application in the catalytic process of PEF. Sulfamethoxazole (SMX) degradation was enhanced by MOF-525-Fe/Zr with the TOC removal rate above 75% both in river water and tap water. Finally, the reasonable pathway of PEF catalytic degradation of SMX was proposed by HPLC-MS analysis. In conclusion, this study provides a new idea for reconstructing the electronic structure of MOFs catalyst and broadening the practical application of PEF technology.

Effective photocatalytic degradation of sulfamethoxazole using tunable CaCu3Ti4O7 perovskite

Sulfamethoxazole (SMX) is largely prescribed for bacterial infections but raises a major concern over generation of antibiotic-resistant bacteria in the environment. This study employed various perovskite-type photocatalysts, made by two-step synthesis procedures, to remove SMX. The as-synthesized CaCu₃Ti₄O₇ (CCTO) perovskites were characterized by XRD, SEM-EDX, and DLS. Complete degradation (∼99%; k_obs = 0.0279 min^-1) of SMX was recorded under UV-light irradiation for 90 min in the presence of CCTO. SMX removal rate was investigated under various reaction conditions including pH, catalyst dose, electrolyte (NaCl and NaBr). The astonishing rate of SMX removal (k_obs = 0.0614 min^-1) was observed with the addition of 50 mM NaBr electrolytes in the reaction, which might imply that the appearance of halogen reactive species. CCTO-MS particles were aggregated in traces when the electrolytes concentration increases, resulting in reduced rate of SMX. The SMX concentration abatement and the formation of possible intermediates during photocatalytic reaction were analyzed. The upshot of this study reveals that the inexpensive and environmentally benign CCTO perovskite photocatalyst could be applied for the treatments of emerging contaminants in the future.

Incorporating nitrogen vacancies in exfoliated B-doped g-C3N4 towards improved photocatalytic ciprofloxacin degradation and hydrogen evolution

The e-BCN fabricated from the double calcination process exhibited significant photocatalytic activity towards photocatalytic ciprofloxacin degradation and hydrogen generation.

Porous loofah-sponge-like ternary heterojunction g-C3N4/Bi2WO6/MoS2 for highly efficient photocatalytic degradation of sulfamethoxazole under visible-light irradiation

A novel porous loofah-sponge-like ternary heterojunction g-C₃N₄/Bi₂WO₆/MoS₂ (CN-BM) was prepared via a facile method. The introduction of binary Bi₂WO₆/MoS₂ into g-C₃N₄ could be qualified for constructing reasonable heterostructure while regulating photocatalysts morphology. Benefiting from the unique structure, the ternary heterojunction composites not only inhibited the agglomeration but also exhibited the prominent visible-light harvest capacity and abundant active sites, which could accelerate the photogenerated carriers separation and preserve the robust redox ability. The results showed that the optimized sample (CN-BM2) displayed the excellent degradation efficiency of sulfamethoxazole (SMX) under visible-light irradiation (over 99% within 60 min), and the fitted pseudo-first-order kinetic rate constant reached to 0.089 min^-1, where it was 3.17 times than that of pure CN. Additionally, the radical scavenger experiments and electron spin resonance experiments indicated that the active species super-oxide radical and hole played a major role in the degradation experiment. The charge transfer mechanism was proposed and the main intermediates indicated that the active radicals attacked on the benzene ring and isoxazole ring in SMX, and further mineralized to inorganic molecules eventually.

A reusable chitosan/TiO2@g-C3N4 nanocomposite membrane for photocatalytic removal of multiple toxic water pollutants under visible light

Photocatalysis has been proved to be a promising approach in wastewater purification. However, it is hard to recycle powdery photocatalysts from wastewater in industry, but immobilizing them using larger materials can overcome this drawback. For that reason, TiO₂@g-C₃N₄ was embedded into chitosan to synthesize a highly reusable and visible-light-driven chitosan/TiO₂@g-C₃N₄ nanocomposite membrane (CTGM). CTGM showed enhanced photoactivity and the photocatalytic efficiencies of the toxic water pollutants methyl orange (M.O.), rhodamine B (Rh.B), chromium (VI) (Cr (VI)), 2,4-dichlorophenol (2,4-DCP) and atrazine (ATZ) were more than 90% under visible light at ambient conditions. Significantly, CTGM was easy to recycle and showed excellent reusability: there was no decrease in the photocatalytic decolorization efficiency of Rh.B throughout 10 cycles. A continuous-flow photocatalysis system was set up and 90% of Rh.B was effectively decolorized. A simple approach was developed to prepare a novel, effective and visible-light-driven membrane that was easy to reuse, and a feasible photocatalysis continuous-flow system was designed to be a reference for wastewater treatment in industry.