Sandwich structured membrane adsorber with metal organic frameworks for aflatoxin B1 removal

Synthesis and characterization of aluminosilicate and zinc silicate from sugarcane bagasse fly ash for adsorption of aflatoxin B1

Sugarcane bagasse fly ash, a residual product resulting from the incineration of biomass to generate power and steam, is rich in SiO2. Sodium silicate is a fundamental material for synthesizing highly porous silica-based adsorbents to serve circular practices. Aflatoxin B1 (AFB1), a significant contaminant in animal feeds, necessitates the integration of adsorbents, crucial for reducing aflatoxin concentrations during the digestive process of animals. This research aimed to synthesize aluminosilicate and zinc silicate derived from sodium silicate based on sugarcane bagasse fly ash, each characterized by a varied molar ratio of aluminum (Al) to silicon (Si) and zinc (Zn) to silicon (Si), respectively. The primary focus of this study was to evaluate their respective capacities for adsorbing AFB1. It was revealed that aluminosilicate exhibited notably superior AFB1 adsorption capabilities compared to zinc silicate and silica. Furthermore, the adsorption efficacy increased with higher molar ratios of Al:Si for aluminosilicate and Zn:Si for zinc silicate. The N2 confirmed AFB1 adsorption within the pores of the adsorbent. In particular, the aluminosilicate variant with a molar ratio of 0.08 (Al:Si) showcased the most substantial AFB1 adsorption capacity, registering at 88.25% after an in vitro intestinal phase. The adsorption ability is directly correlated with the presence of surface acidic sites and negatively charged surfaces. Notably, the kinetics of the adsorption process were best elucidated through the application of the pseudo-second-order model, effectively describing the behavior of both aluminosilicate and zinc silicate in adsorbing AFB1.

Simultaneously Selective Separation of Zearalenone and Four Aflatoxins From Rice Samples Using Co-Pseudo-Template Imprinted Polymers With MIL-101(Cr)-NH2 as Core

A novel approach for the simultaneous separation of zearalenone (ZEN) and four types of aflatoxins (AFB1, AFB2, AFG1 and AFG2) from rice samples was presented. This approach utilized modified MIL-101(Cr)-NH2 as core, with molecularly imprinted polymers (MIPs) serving as the shell. The MIL-101(Cr)-NH2 was prepared via ring-opening reaction, while the imprinted polymers were synthesized using warfarin and 4-methylumbelliferyl acetate as co-pseudo template, ethylene glycol dimethacrylate as the cross-linker and azobisisobutyronitrile as initiator. The resulting co-pseudo-template-MIPs (CPT-MIPs) were thoroughly characterized and evaluated. Adsorption studies demonstrate that the adsorption process of CPT-MIPs follows a chemical monolayer adsorption mechanism, with imprinted factors ranging from 1.24 to 1.52 and selective factors ranging from 1.29 to 1.52. Self-made columns were prepared, and the method for separation was developed and validated. The limit of detections ranged from 0.12 to 2.09 μg/kg, and the limit of qualifications ranged from 1.2 to 6.25 μg/kg. To assess the reliability of the method, ZEN and AFs were spiked at three different levels, and the recoveries ranged from 79.53 to 94.58%, with relative standard deviations of 2.90-5.78%.

Activate hydrogen peroxide for facile and efficient removal of aflatoxin B1 by magnetic Pd-chitosan/rice husk-hercynite biocomposite and its impact on the quality of edible oil

Due to the high heat and chemical stability of aflatoxin B1 (AFB1) with significant impacts on humans/animals and thus it needs to develop a practical and efficient approach for its removal. Herein, we fabricated a magnetic Pd-chitosan/glutaraldehyde/rice husk/hercynite (Pd@CRH-x) composite for efficient detoxification of AFB1. The Pd@CRH-x was obtained by a simple wet-impregnation procedure of CRH complexes followed by pyrolysis. The results confirmed that the unique structure of Pd@CRH-400 effectively improves dispersity, and mass transfer subsequently enhancing removal efficiency in batch conditions. Results indicate 94.30 % of AFB1 was efficiently degraded by 0.1 mg mL-1 Pd@CRH-400 with 4.0 mM H2O2 at wide pH ranges (3.0-10) at 60 min with a decomposition rate constant of 0.0467 min-1. Besides, by comparing the quality factors of edible oil (i.e., acid value, peroxide value, iodine value, moisture, volatile matters, anisidine value, and fatty acid composition), it was confirmed that there was no obvious influence on the physicochemical indicators of edible oil after removal/storage process. Subsequently, the systematic kinetic study and AFB1 degradation mechanism were presented. This study provides a new strategy for the efficient construction of controllable and dispersed Pd-based catalysts using CRH-x as a spatial support for alleviating the risk of toxic pollutants.

Occurrence of aflatoxins in water and decontamination strategies: A review

Aflatoxins are highly carcinogenic metabolites produced by some Aspergillus species and are the most prevalent mycotoxins. Although aflatoxins are commonly synthesized during fungal colonization in preharvest maize, cereals, and nuts, they can be transported by rainfall to surface water and are a common toxin found in wastewater from some food industries. Here, the occurrence of aflatoxins in bodies of water is reviewed for the first time, along with the decontamination methods. Aflatoxins have been detected in surface, wastewater and drinking water, including tap and bottled water. The specific sources of water contamination remain unclear, which is an important gap that must be addressed in future research. Two main kinds of decontamination methods have been reported, including degradation and adsorption. The best degradation rates were observed using gamma and UV irradiations, oxidoreductases and ozone, while the best adsorption abilities were observed with minerals, polyvinyl alcohol, durian peel and activated carbon. Synthetic polymers could be used as membranes in pipes to remove aflatoxins in water flows. Although most decontamination methods were screened using AFB₁, the other commonly found aflatoxins were not used in the screenings. Overall, the occurrence of aflatoxins in water could be a significant emerging public health concern largely ignored by local and international legislation. Numerous advances have been reported for the decontamination of aflatoxins in water; however, there is still a long way to go to put them into practice.

Efficient and simultaneous removal of aflatoxin B1, B2, G1, G2, and zearalenone from vegetable oil by use of a metal-organic framework absorbent

Vegetable oils are usually cocontaminated with different mycotoxins, including aflatoxins and zearalenone, which cause significant food safety issues. Establishment of multitarget, high-efficiency, and low-cost adsorption methods are considered to be ideal solutions for mycotoxin removal in vegetable oils. In this study, we used metal-organic frameworks (MOFs) were used for the simultaneous removal of aflatoxins and zearalenone from vegetable oils. The results showed that MOF-235 simultaneously removed, within 30 min, more than 96.1% of aflatoxins and 83.3% of zearalenone from oils, and oils treated with MOF-235 exhibited di minimis cytotoxicity. Thus, synthesized MOF-235 exhibited sufficient efficacy to remove the targeted residues, as well as safety and reusability, which could be applied as a novel potential adsorbent in the removal of multiple mycotoxins from contaminated vegetable oils.

Advanced mycotoxin control and decontamination techniques in view of an increased aflatoxin risk in Europe due to climate change

Aflatoxins are toxic secondary metabolites produced by Aspergillus spp. found in staple food and feed commodities worldwide. Aflatoxins are carcinogenic, teratogenic, and mutagenic, and pose a serious threat to the health of both humans and animals. The global economy and trade are significantly affected as well. Various models and datasets related to aflatoxins in maize have been developed and used but have not yet been linked. The prevention of crop loss due to aflatoxin contamination is complex and challenging. Hence, the set-up of advanced decontamination is crucial to cope with the challenge of climate change, growing population, unstable political scenarios, and food security problems also in European countries. After harvest, decontamination methods can be applied during transport, storage, or processing, but their application for aflatoxin reduction is still limited. Therefore, this review aims to investigate the effects of environmental factors on aflatoxin production because of climate change and to critically discuss the present-day and novel decontamination techniques to unravel gaps and limitations to propose them as a tool to tackle an increased aflatoxin risk in Europe.

Removal of aflatoxin B1 from aqueous solution using amino-grafted magnetic mesoporous silica prepared from rice husk

It is urgent to solve the contamination of aflatoxin B₁ (AFB₁) in food and water. In this study, the mesoporous silica was prepared from rice husk, which was then magnetized using the precipitation technique, followed by amino-modification with 3-aminopropyltriethoxysilane, forming amino-grafted magnetic mesoporous silica (NMMS). X-ray diffraction, Fourier transformed infrared spectra, and thermogravimetric analysis showed the successful grafting of amino groups on NMMS with a percentage of grafting up to 13.33%. The NMMS had an adsorption capacity of 169.88 μg/g and a removal rate of 93.43% for AFB₁ in aqueous solutions at 20 °C, pH 7.0 for 2.0 h. The adsorption of AFB₁ by NMMS followed a quasi-second-order kinetics and fitted well with the Langmuir model. Furthermore, the removal rate of AFB₁ by NMMS remained 72.43% after repeating the adsorption-desorption process for five times. This study provided a facile approach to prepare NMMS for effective removal of AFB₁.

Synthesis and evaluation of a Zn-Al layered double hydroxide for the removal of ochratoxin A. Greenness assessment

The retention behavior of a dangerous toxin, ochratoxin A (OTA), present in food samples and derivatives was evaluated using Layered Double Hydroxides (LDHs). This nanomaterial composed mostly of zinc and aluminum was synthesized by the co-precipitation method and the obtained solid was characterized by different techniques, such as XRD, FTIR, TGA, SEM, and N₂ adsorption-desorption isotherms. Experimental conditions were optimized by chemometric tools. Ochratoxin A determination was performed using an ultra-high-performance liquid chromatography (UHPLC) system coupled to tandem mass spectrometry. From the findings, quantitative removal of the mycotoxin was achieved. Thus, a novel, nanostructured, innocuous, low-cost, easily synthesized material, such as the Zn-Al layered double hydroxide, is proposed for ochratoxin A removal. This might represent an effective and sustainable approach with potential applications to different types of food and feed samples.

Synergistic Effects of Probiotic Bifidobacterium Isolated from Chicken's Intestine in Combination with Polyvinylpyrrolidone on Reduction of Aflatoxin B1

Food contamination with aflatoxin is one of the most critical concerns of health professionals. One of the best ways to reduce aflatoxin content in food is probiotics. Therefore, this study was performed to isolate Bifidobacterium from the chick's intestine; evaluate its probiotic activities and its application with Polyvinylpyrrolidone (PVP) to reduce aflatoxin B₁ (AFB₁ ) in the medium were investigated. Samples were isolated from the chick's intestine, and Bifidobacterium was isolated and identified by biochemical and molecular methods. Next, the potential probiotic characterization was assessed. Afterward, the effect of selected isolate and PVP on reducing AFB₁ in the medium was studied using ELISA and HPLC. Biochemical and molecular evaluations indicated isolation of Bifidobacterium bifidum strain from chick's intestine. One of the B. bifidum strains was selected for the next steps, which showed potential probiotic characterization and the ability to reduce the concentration of AFB₁ in the medium (50% reduction). When used in combination with PVP showed synergistic effects in reducing the concentration of AFB₁ from the medium (up to 90%). In conclusion, it was found that selected B. bifidum strains and PVP could have synergistic effects in reducing AFB₁ toxin in a medium up to 90%.

Metal-organic frameworks with peroxidase-like activity for efficient removal of aflatoxin B1

Aflatoxin B₁ (AFB₁), a naturally produced toxin existing in major food crops, is highly toxic and carcinogenic to human and animals. In this study, a reusable material, Pd@PCN-222 with great adsorption performance and peroxidase-like activity was synthesized for the removal of AFB₁. Pd@PCN-222 exhibited great adsorption performance owing to hierarchical porous structure. Pd@PCN-222 also could catalyze the AFB₁ in the presence of H₂O₂ due to the Fe-tetrakis (4-carboxyphenyl) porphyrin and Pd as effective peroxidase active site, which improved the removal efficiency of AFB₁. Pd@PCN-222 was applied for the removal of AFB₁ with a removal rate of 96.52% in 2 h. Owing to the advantages of high removal efficiency and reusability, Pd@PCN-222 had great application potential in AFB₁ removal.

Removal of Contaminants from Water by Membrane Filtration: A Review

Drinking water sources are increasingly subject to various types of contamination due to anthropogenic factors and require proper treatment to remove disease-causing agents. Public drinking water systems use different treatment methods to provide safe and quality drinking water to populations. However, they are ineffective in removing contaminants that are considered a danger to the environment and therefore to humans. Several alternative treatment processes have been proposed, such as membrane filtration, as final purification methods. This paper aims to summarize the type of pollutant compounds, filtration processes, and membranes that have been most studied in this area with particular emphasis on how the modification of membranes, either the manufacturing process or the incorporation of nanomaterials, influences their performance.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

Synthesis of Polyaniline Coated Magnesium and Cobalt Oxide Nanoparticles through Eco-Friendly Approach and Their Application as Antifungal Agents

Plant-mediated synthesis of nanoparticles exhibits great potential to minimize the generation of chemical waste through the utilization of non-toxic precursors. In this research work, we report the synthesis of magnesium oxide (MgO) and cobalt oxide (Co₃O₄) nanoparticles through a green approach using Manilkara zapota leaves extract, their surface modification by polyaniline (PANI), and antifungal properties against Aspergillus niger. Textural and structural characterization of modified and unmodified metal oxide nanoparticles were evaluated using FT-IR, SEM, and XRD. The optimal conditions for inhibition of Aspergillus niger were achieved by varying nanoparticles’ concentration and time exposure. Results demonstrate that PANI/MgO nanoparticles were superior in function relative to PANI/Co₃O₄ nanoparticles to control the growth rate of Aspergillus niger at optimal conditions (time exposure of 72 h and nanoparticles concentration of 24 mM). A percentage decrease of 73.2% and 65.1% in fungal growth was observed using PANI/MgO and PANI/Co₃O₄ nanoparticles, respectively, which was higher than the unmodified metal oxide nanoparticles (67.5% and 63.2%).

Prediction of the phenol removal capacity from water by adsorption on activated carbon

High-performance sulfonated polysulfone (SPSf) mixed-matrix membranes (MMMs) were fabricated via a nonsolvent-induced phase separation (NIPS) method using zeolitic imidazolate frameworks-67 (ZIF-67) as a crosslinker. Acid-base crosslinking occurred between the sulfonic acid groups of SPSf and the tertiary amine groups of the embedded ZIF-67, which improved the dispersion of ZIF-67 and simultaneously improved the membrane strzcture and permselectivity. The dispersion of ZIF-67 in the MMMs and the acid-base crosslinking reaction were verified by energy-dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The pore structure analysis of MMMs indicated that filling ZIF-67 into SPSf enhanced the average surface pore sizes, surface porosities and more micropore in cross-sections. The crossflow filtrations showed the MMMs have higher pure water fluxes (57 to 111 L m^-2 h^-1) than the SPSf membrane (55 L m^-2 h^-1) but also higher bovine serum albumin (BSA) rejection rate of 93.9-95.8%, a model protein foulant. The MMMs showed a higher water contact angle than the SPSf membrane due to the addition of hydrophobic ZIF-67 and acid-base crosslinking, and also maintained high thermal stability evidenced by the thermogravimetric analysis (TGA) results. At the optimal ZIF-67 concentration of 0.3 wt%, the water flux of the SPSf-Z67-0.3 membrane was 82 L m^-2 h^-1 with a high BSA rejection rate of 95.3% at 0.1 MPa and better antifouling performance (FRR = 70%).

Metal–organic frameworks/biopolymer nanocomposites: from fundamentals toward recent applications in modern technology

Bio–nanocomposite compounds based on biopolymers and MOFs have presented great potential in various applications for modern technology.