Pilot scale hexavalent chromium removal with reduction, coagulation, filtration and biological iron oxidation

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater

Sustainable development has become an inevitable trend in the world's green chemical industry for a generation or more. In this study, a monodisperse magnetic polystyrene mesoporous composite microsphere (MPPS) composed of Fe3O4 nanoparticles loaded on polystyrene mesoporous microspheres is introduced. These microspheres serve as effective adsorbents for the swift removal of cationic dyes. The fabrication of the wastewater adsorbent, with its simple operation and economic practicality, involved a combination of dispersion polymerization, a sulfonation reaction, two-step swelling polymerization, and in situ alkaline oxidation technology. Notably, the adsorption capacity within 3 min reaches 184.0 mg/g, with an impressive adsorption efficiency of 92%. This is primarily attributed to the high specific surface area (Smax) of the MPPS providing more reaction sites for π-π interaction. Simultaneously, the attractive force between negatively charged sulfonic acid groups and cationic dyes is enhanced through surface modification of the MPPS. Furthermore, the MPPS, boasting a maximum saturation magnetization of 38.19 emu/g, ensures rapid separation from the solution for recycling within 3 s. Even after 5 cycles, the adsorption efficiency remains over 90%. The rapid separation of dyes is facilitated by the magnetic attraction of Fe3O4 nanoparticles from the MPPS under the application of a magnetic field. These composite mesoporous materials exhibit outstanding performance in both efficient selective adsorption and recyclability, presenting a novel green adsorbent with promising prospects for sustainable development. This innovation is poised to excel in fields such as sewage treatment, separation, and purification.

Simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range by using magnetic chitosan-based biopolymer

The simultaneous reduction of Cr(VI) and sequestration of the resulting Cr(III) in one process is highly desirable as a cost-effective and environmental-friendly approach for the decontamination of Cr(VI)-polluted wastewater. However, most of the existing adsorptive materials are only effective in low pH environments (pH = 1-3), severely restricting the adsorption efficiency and cost effectiveness. Herein, we proposed a chitosan-based magnetic porous microsphere (PPy@PMCS) for simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range. Benefiting from its abundant interaction sites, Cr(VI) was effectively adsorbed on the surface and then immediately reduced to Cr(III) with much lower toxicity. Most importantly, the resulting Cr(III) was in-situ sequestrated by the complexation of chitosan matrix. As a result, PPy@PMCS exhibited a maximum Cr(VI) adsorption capacity of 330.42 mg/g at pH 2.0 and an adsorption capacity of 167.82 mg/g even at near neutral pH (6.0), which is superior to most reported adsorbents. Furthermore, the exhausted PPy@PMCS can be rapidly separated from solutions under an external magnetic field and facilely regenerated. The proposed novel biopolymer-based material shows great application potentials in wastewater treatment.

Tin Oxide Nanoparticles via Solar Vapor Deposition for Hexavalent Chromium Remediation

Tin oxide nanoparticles optimized to capture low concentrations of hexavalent chromium from water were developed through a facile, scalable, and low-cost one-step solar vapor deposition methodology. Considering the preservation of high electron donation capacity as the key to support the reduction of mobile Cr(VI) into insoluble forms, the growth of SnO nanoparticles was favored by the co-evaporation of SnO2 with Fe powders at various mass ratios. Characterization techniques indicated that the percentage and the stability of SnO is proportional to the Fe content in the target with a requirement of at least 50% wt to inhibit the formation of a passive SnO2 surface layer. The produced particles were evaluated regarding their efficiency to capture Cr(VI) under conditions similar to water treatment for drinking purposes (pH 7). It was revealed that passivation-free SnO nanoparticles deliver significant improvement in the adsorption capacity corresponding to the residual concentration of 25 μg/L, reaching a value of 1.74 mg/g for the sample prepared with 50% wt Fe in the target. The increase of water acidity was found responsible for the activation of more reduction sites on the particle surface, as reflected through the elevation of efficiency by more than 20% at pH 6.

Efficient removal of Cr (VI) from aqueous solution by using tannery by-product (Buffing Dust)

The current study is focused on using tannery waste called buffing dust to remove hexavalent chromium from an aqueous solution. The buffing dust was characterised by using different technique like FTIR, SEM, and BET analysis. The adsorption experiment was conducted in batch mode. The different operating factors including contact time, dose and initial Cr (VI) concentration were investigated. The optimum adsorption capacity was observed at contact time of 240 min and dose of 1g/100 mL. The adsorption isotherm such as Langmuir, Freundlich and Temkin were investigated at different initial concentration. It was observed that Langmuir isotherm model was best fitted for present study with maximum adsorption efficiency of 11.33 mg/g. The kinetic study was performed for pseudo first order and pseudo second order and it was found that pseudo second order model was provided the best match with regression coefficient (R²) of 0.9991.

Fabrication of 3D self-supported MoS2-Co-P/nickel foam electrode for adsorption-electrochemical removal of Cr(Ⅵ)

Electrochemistry is considered to be one of the most efficient and environment-friendly methods for removing highly toxic Cr (Ⅵ). In this study, a 3D self-supported MoS₂-Co-P/nickel foam (NF) electrode was prepared via a calcination-hydrothermal process to remove the Cr (Ⅵ) in aqueous medium. Scanning electron microscope (SEM) analysis indicated that the pine-needle-like Co₂P nanoneedle and flower-like MoS₂ nanosheets were successfully loaded on the three-dimensional (3D) framework of NF, which provided abundant active sites. The electrode modified by Co, P and MoS₂ exhibited high removal efficiency of Cr (Ⅵ) (96.9%) at pH 3.0, current of 0.128 mA and voltage of 2.5 V. Co, P and MoS₂ have the synergistic promotion on the catalytic performance of electrodes, and the reduction efficiency of Cr (Ⅵ) was greatly improved by 127.5 times relative to pure NF. The enhanced removal of Cr (Ⅵ) was related to the coupling effect of adsorption and electrocatalytic reduction. The mechanism study indicated that electron (e^-) is the active species of Cr (Ⅵ) reduction. The Cr (Ⅵ) removal rate was maintained at 90 ± 1% after five successive cycle experiments, demonstrating good stability and potential industrial applications of MoS₂-Co-P/NF.

A comprehensive study on the adsorption-photocatalytic processes using CoFe2O4/SiO2/MnO2 magnetic nanocomposite as a novel photo-catalyst for removal of Cr (VI) under simulated sunlight: Isotherm, kinetic and thermodynamic studies

PURPOSE

The present study aimed to investigate the efficiency of CoFe₂O₄/SiO₂/flower-like MnO₂ nanoparticles as a catalyst for Cr (VI) adsorption-photocatalytic processes.

METHODS

The magnetic nanocomposite used was first synthesized and then characterized using TEM, SEM, EDX, XRD, FTIR, XRF and BET advanced techniques. The removal of the Cr (VI) was performed through a batch adsorption approach and the effects of sample pH (A; 2-6), initial chromate concentration (B; 50-100 ppm) and adsorbent weight to sample volume ratio (C; 1-3 mg ml^-1), hole scavenger (0.1 -0.3%w/v) and time (E; 30-60 min), to evaluate the individual and interactive effects under ultraviolet light conditions, were also studied by the central composite design in the photocatalytic process of adsorption.

RESULTS

The adsorption-photocatalytic performance of the CoFe₂O₄/SiO₂/MnO₂ composite was high in which 98.1% of Cr(VI) after 30 min of photocatalytic treatment in optimum conditions (i.e. pH = 3, catalyst concentration = 2 mg L^-1, Cr(VI) concentration = 200 mg L^-1, and hole scavenger concentration = 0.4% (w/ v), At laboratory temperature, speed = 400 rpm, under UV radiation).Under optimum conditions, Cr(VI) reductive followed pseudo-second-order kinetics and followed the Langmuir and Temkin isotherms, also, positive value of ΔH° indicates endothermic nature.

CONCLUSIONS

The results showed that the synthesized CoFe₂O₄/SiO₂/MnO₂ magnetic nanocomposite holds a great potential for use as a photocatalyst to remove Cr (VI) in adsorption reactions. It can be used as an effective catalyst in the eradication of Cr (VI) wastewater.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-021-00763-1.

Adsorption-Desorption Surface Bindings, Kinetics, and Mass Transfer Behavior of Thermally and Chemically Treated Great Millet Husk towards Cr(VI) Removal from Synthetic Wastewater

This study reports the efficacy of adsorbents synthesized by thermal (TT-GMH) and chemical (CT-GMH) modification of great millet husk (GMH) for the treatment of synthetic wastewater containing Cr(VI). The chemical modification of raw GMH was done by concentrated H2SO4 to increase the porosity and heterogeneity on the surface. The comparative investigations of physicochemical properties of synthesized adsorbents were examined by point of zero charge (pHpzc), BET surface area, SEM-EDX, FTIR, and XRD analyses. The results revealed that CT-GMH had around three times higher surface area and more porous structure as compared to TT-GMH. The adsorption experiments were executed in batch mode to examine the impact of parameters governing the adsorption process. For Cr(VI) solution of 25 mg/L, adsorbent dose of 4 g/L, temperature of 25 ${}^{°}\text{C}$ , and shaking speed of 150 RPM, the maximum removal for TT-GMH was attained at pH 1 and contact time 150 min, while for CT-GMH, maximum removal was attained at pH 2 and contact time 120 min. The experimental results fitted to the rate kinetic equations showed that for both TT-GMH and CT-GMH, adsorbents followed the quasi-second-order kinetic model during the adsorption process. Further, results revealed that the adsorption process was endothermic and Sips isotherm model was followed for both TT-GMH and CT-GMH. Based on the Sips isotherm, maximum uptake capacity for TT-GMH and CT-GMH was noted to be 16 and 22.21 mg/g, respectively. Among the tested mass transfer models, liquid film diffusion model was followed during the adsorption process of both the adsorbents. The desorption study revealed that TT-GMH and CT-GMH give 69.45% and 74.48% removal, respectively, up to six cycles.

Synergistic effect of pistachio shell powder and nano-zerovalent copper for chromium remediation from aqueous solution

Pistachio shell powder supported nano-zerovalent copper (ZVC@PS) material prepared by borohydride reduction was characterized using SEM, FTIR, XRD, TGA/DTA, BET, and XPS. SEM, XRD, and XPS revealed the nano-zerovalent copper to consist of a core-shell structure with CuO shell and Cu(0) core with a particle size of 40-100 nm and spherical morphology aggregated on PS biomass. ZVC@PS was found to contain 39% (w/w %) Cu onto the pistachio shell biomass. Batch sorption of Cr(VI) from the aqueous using ZVC@PS was studied and was optimized for dose (0.1-0.5 g/L), initial Cr(VI) concentration(1-20 mg/L), and pH (2-12). Optimized conditions were 0.1 g/L doses of sorbent and pH=3 for Cr(VI) adsorption. Langmuir and Freundlich adsorption isotherm models fitted well to the adsorption behavior of ZVC@PS for Cr(VI) with a pseudo-second-order kinetic behavior. ZVC@PS (0.1g/L) exhibits q_max for Cr(VI) removal up to 110.9 mg/g. XPS and other spectroscopic evidence suggest the adsorption of Cr(VI) by pistachio shell powder, coupled with reductive conversion of Cr(VI) to Cr(III) by ZVC particles to produce a synergistic effect for the efficient remediation of Cr(VI) from aqueous medium.

Lead, cadmium, mercury, and chromium in urine and blood of children and adolescents in Germany - Human biomonitoring results of the German Environmental Survey 2014-2017 (GerES V)

Metals reach humans through food and drinking water intake and inhalation of airborne particles and can have detrimental health effects in particular for children. The metals presented here (lead, cadmium, chromium, and mercury) could lead to toxic effects such as neurotoxicity, mutagenicity, and have been classified as (possible) carcinogens. Using population representative data from the German Environmental Survey 2014-2017 (GerES V) from 3- to 17-year-old children on lead and cadmium in blood (n = 720) and on cadmium, chromium, and mercury in urine (n = 2250) we describe current internal exposure levels, and socio-demographic and substance-specific exposure determinants. Average internal exposure (geometric means) in blood was 9.47 μg/L for lead and below 0.06 μg/L (limit of quantification) for cadmium, and in urine 0.072 μg/L for cadmium, 0.067 μg/L for mercury, and 0.393 μg/L for chromium, respectively. Younger children have higher concentrations of lead and chromium compared to 14-17-year-old adolescents, and boys have slightly higher mercury concentrations than girls. With respect to substance specific determinants, higher lead concentrations emerged in participants with domestic fuel and in non-smoking children with smokers in the household, higher levels of cadmium were associated with smoking and vegetarian diet and higher levels of mercury with the consumption of seafood and amalgam teeth fillings. No specific exposure determinants emerged for chromium. The health based guidance value HBM-I was not exceeded for mercury and for cadmium in urine it was exceeded by 0.6% of the study population. None of the exceedances was related to substantial tobacco smoke exposure. Comparisons to previous GerES cycles (GerES II, 1990-1992; GerES IV, 2003-2006) indicate continuously lower levels.

Highly Efficient Visible Light Photodegradation of Cr(VI) Using Electrospun MWCNTs-Fe3O4@PES Nanofibers

The development of highly efficient photocatalysis has been prepared by two different methods for the photodegradation of Cr(VI) from an aqueous solution under visible light. The electrospun polyethersulfone (PES)/iron oxide (Fe3O4) and multi-wall carbon nanotubes (MWCNTs) composite nanofibers have been prepared using the electrospinning technique. The prepared materials were characterized by SEM and XRD analysis. The result reveals the successful fabrication of the composite nanofiber with uniformly and smooth nanofibers. The effect of numerous parameters were explored to investigate the effects of pH value, contact time, concentration of Cr(VI), and reusability. The MWCNTs-Fe3O4@PES composite nanofibers exhibited excellent photodegradation of Cr(VI) at pH 2 in 80 min. The photocatalysis materials are highly stable without significant reduction of the photocatalytic efficiency of Cr(VI) after five cycles. Therefore, due to its easy separation and reuse without loss of photocatalytic efficiency, the photocatalysis membrane has tremendous potential for the removal of heavy metals from aqueous solutions.

Ion-imprinted modified molecular sieves show the efficient selective adsorption of chromium(vi) from aqueous solutions

Molecular sieve 5A was modified with (3-aminopropyl) triethoxysilane (APTES) as the support matrix, on which 4-VP was used as the ionic imprinting group.