Flexible and free-standing pristine polypyrrole membranes with a nanotube structure for repeatable Cr(VI) ion removal

Durable Flexible Conductive Fiber Based on Cross-Linking Network Tannic Acid/Polypyrrole for Wearable Thermotherapy Monitoring System

Intelligent wearable textiles have garnered attention and advancement, particularly in the realms of thermotherapy and health monitoring. As a critical component of intelligent wearable textiles, conductive fibers are expected to have long-term stable and durable conductivity. In this work, a highly stretchable and conductive fiber based on tannic acid/polypyrrole was developed. The conductive network was formed by doping TA into PPy, resulting in enhanced stretchability of PPy on the surface of PU. TA also improves the interface interaction between PPy and PU to gain more firm attachment of PPy, which achieves high conductivity (0.89 ± 0.23 S/cm) and durability. Furthermore, the stretchable conductive fiber also exhibited intelligent responses to electricity, light, and deformation. They can serve as heat sources under the action of electricity and light (temperature was raised to 42 °C under 4 V and 54 °C under solar radiation stimuli) and can also monitor the movements of humans, making them potential applications in thermotherapy textiles and intelligent sensing equipment. A PU/TA/PPy-based all-in-one smart wearable system was fabricated using textile molding technology capable of all-weather thermal therapy and motion detection. This fiber fabrication technology and integrated system offer insights for the future development of smart wearable devices.

α-α Coupling-Dominated PPy Film with a Well-Conjugated Structure for Superlong Cycle Life Supercapacitors

As the electrode of a supercapacitor, polypyrrole (PPy) inevitably suffers from structural rupture during repeated doping/dedoping processes and releases low practical capacitance due to the large amount of aggregation or cross-linking in PPy chains. The coupling mode (α-α, α-β, or β-β coupling) of pyrroles is critical to the conjugated structure, the conductivity, and cycling stability of PPy. Here, we prepared an α-α coupling-dominated PPy film via simple frozen interfacial polymerization. The PPy film with a nanostructure exposes more electrochemical active sites for the electrode, which can enhance the practical capacitance. The high proportion of the α-α coupling mode results in a high degree of large π-conjugation and a planar structure that can effectively improve the reversible ion transport efficiency and promote uniform stress distribution during the charge and discharge process. The assembled symmetric water-based supercapacitor delivers a high specific capacitance of 267.1 F g-1 at 1 A g-1 and 266.7 F g-1 at 5 A g-1 and exhibits an outstanding cycling performance of above 200 F g-1 even after 60,000 cycles.

Recyclable adsorption removal and fluorescent monitoring of hexavalent chromium by electrospun nanofibers membrane derived from Tb3+ coordinating polyarylene ether amidoxime

Emerging technologies or advanced materials which can simultaneously adsorb and detect highly toxic Cr(VI) are urgently in demand for environmental remediation. Herein, we have designed and synthesized a functional polyarylene ether with aromatic main chain and pendent carboxyl groups along with amidoxime group that can be coordinated with different metal ions. Thanks to its versatile activation of the lanthanide ions' inherent fluorescence and good processability, the fluorescent nanofiber membranes with competitive Cr(VI) adsorption and detection performance have been fabricated via one-step electrospinning of mixed solution containing synthesized polymer and terbium salt. More specifically, the optimized nanofiber membrane exhibits a maximal Cr(VI) adsorption of 278.2 mg/g and specific detection for hexavalent chromium down to 11.76 nM. More importantly, the prepared fluorescent nanofiber membranes can be easily re-generated and re-used for both Cr(VI) adsorption and detection for five times. Given the unique advantages of easy fabrication, competitive dual functionalities as well as good reusability of electrospun fluorescent nanofiber membranes, the present work basically opens up new insight in the design of multifunctional recyclable material for the remediation of heavy metal pollution.

Study on the cyclic adsorption performance of biomass composite membrane for Hg(II)

Salix psammophila wood flour /polyvinyl alcohol hydrogel composite membrane (SPPM) with high adsorption capacity and good cycle adsorption performance was prepared by wet spinning technology. The SPPM was characterised by the scanning electron microscope (SEM), specific surface area test (BET), energy dispersive spectrum (EDS) thermal gravimetric analysis (TGA), fourier transform infrared spectroscopy (FT-IR), and x-ray photoelectron spectroscopy (XPS). The results showed that the surface of SPPM is rough and porous, with good pore structure and thermal stability, and mercury ions (Hg(II)) have been successfully adsorbed on SPPM. At the same time, the effects of adsorption conditions (Hg(II) initial concentration, pH, adsorption time, and temperature) on the adsorption performance of SPPM were studied. Results from the adsorption experiment showed that the adsorption capacity of SPPM for Hg(II) can reach 426 mg/g. After four adsorption and desorption experiments, the adsorption capacity can reach 375 mg/g, which indicates that SPPM has good cycle adsorption performance. The adsorption kinetics was better described by the Pseudo-second-order kinetic, and their adsorption isotherms were fitted for the Langmuir model. The obtained results showed that SPPM is an available, economical adsorbent and was found suitable for removing Hg(II) from an aqueous solution.

Synchronously Enhanced Removal Ability and Stability of MXene through Biomimetic Modification

Increasing environmental problems intensify the demand for high-performance environmental purification materials. MXene is a typical transition-metal carbide/nitride material with a two-dimensional geometric feature and a good deal of functional groups, and it is considered as an efficient adsorbent for removing pollutants from wastewater. However, the easy oxidation and relatively low adsorption capacity greatly restrict its application. In this study, the MXene/polydopamine (PDA) composite particles were fabricated through the biomimetic modification method of inducing the self-polymerization of dopamine in an MXene aqueous solution. Microstructure characterizations demonstrate that PDA facilitates the exfoliation of MXene. Adsorption measurements show that MXene and PDA exhibit an apparent synergistic effect in removing chromium hexavalent Cr(VI) from aqueous solution, and more PDA content leads to a larger synergistic effect. Consequently, the composite particles exhibit an ultrahigh adsorption capacity (862.3 mg/g). Specifically, even if the composite particles were stored in aqueous solution for 2 months, they still exhibit high adsorption ability with only a 3.3% loss in adsorption capacity, indirectly confirming the enhanced stability of MXene induced by PDA. Furthermore, the composite particles also show reduction ability to Cr(VI) and about 54.3% Cr(VI) can be reduced to harmless chromium trivalent Cr(III). This study provides a new method for the preparation of MXene-based adsorbents with excellent adsorption capacity and high stability, which has broad application prospects in the field of wastewater treatment.

Turning waste into valuables: In situ deposition of polypyrrole on the obsolete mask for Cr(VI) removal and desalination

The global mask consumption has been exacerbated because of the coronavirus disease 2019 (COVID-19) pandemic. Simultaneously, the traditional mask disposal methods (incineration and landfill) have caused serious environmental pollution and waste of resources. Herein, a simple and green mass-production method has been proposed to recycle carbon protective mask (CPM) into the carbon protective mask/polydopamine/polypyrrole (CPM/PDA/PPy) composite by in situ polymerization of PPy. The CPM/PDA/PPy composite was used for the removal of Cr(VI) and salt ions to produce clean water. The synergistic effect of PPy and the CPM improved the removal capability of Cr(VI). The CPM/PDA/PPy composite provided high adsorption capacity (358.68 mg g^-1) and economic value (811.42 mg $^-1). Consequently, the CPM/PDA/PPy (cathode) was combined with MnO₂ (anode) for desalination in CDI cells, demonstrated excellent desalination capacity (26.65 mg g^-1) and ultrafast salt adsorption rate (6.96 mg g^-1 min^-1), which was higher than conventional CDI cells. Our work proposes a new low-carbon strategy to recycle discarded masks and demonstrates their utilization in Cr(VI) removal and seawater desalination.

Advances in Sorptive Removal of Hexavalent Chromium (Cr(VI)) in Aqueous Solutions Using Polymeric Materials

Sorptive removal of hexavalent chromium (Cr(VI)) bears the advantages of simple operation and easy construction. Customized polymeric materials are the attracting adsorbents due to their selectivity, chemical and mechanical stabilities. The mostly investigated polymeric materials for removing Cr(VI) were reviewed in this work. Assembling of robust functional groups, reduction of self-aggregation, and enhancement of stability and mechanical strength, were the general strategies to improve the performance of polymeric adsorbents. The maximum adsorption capacities of these polymers toward Cr(VI) fitted by Langmuir isotherm model ranged from 3.2 to 1185 mg/g. Mechanisms of complexation, chelation, reduction, electrostatic attraction, anion exchange, and hydrogen bonding were involved in the Cr(VI) removal. Influence factors on Cr(VI) removal were itemized. Polymeric adsorbents performed much better in the strong acidic pH range (e.g., pH 2.0) and at higher initial Cr(VI) concentrations. The adsorption of Cr(VI) was an endothermic reaction, and higher reaction temperature favored more robust adsorption. Anions inhibited the removal of Cr(VI) through competitive adsorption, while that was barely affected by cations. Factors that affected the regeneration of these adsorbents were summarized. To realize the goal of industrial application and environmental protection, removal of the Cr(VI) accompanied by its detoxication through reduction is highly encouraged. Moreover, development of adsorbents with strong regeneration ability and low cost, which are robust for removing Cr(VI) at trace levels and a wider pH range, should also be an eternally immutable subject in the future. Work done will be helpful for developing more robust polymeric adsorbents and for promoting the treatment of Cr(VI)-containing wastewater.

Flexible and easy-handling pristine polypyrrole membranes with bayberry-like vesicle structure for enhanced Cr(VI) removal from aqueous solution

Polypyrrole has been extensively explored for Cr(VI) removal from wastewater towing to the advantages of superior performance, low cost, facile synthesis, and high environmental stability. However, the unsatisfactory adsorption capacity and complicated process of adsorbent separation from aqueous solutions remain a huge challenge, limiting its practical application. Herein, a flexible PPy membrane with bayberry-like vesicle structures (PPy-B) was prepared via template-assisted interfacial polymerization. It was found that sodium sulfosalicylate not only improved the flexibility and strength of the PPy-B membrane for easy-handling but also participated in the polymerization of PPy as a dopant to improve the specific surface area and doping level for increasing adsorption sites. Benefiting from these, the easy-handling PPy-B membrane exhibited a high adsorption capacity (586.90-682.50 mg/g at 298-318 K), a high reusability (five adsorption-desorption cycles), and a high ultimate adsorption capacity after adsorption-desorption cycles until membrane failure (1174.86 mg/g at 298 K). The proposed mechanisms of the enhanced Cr(VI) removal involve electrostatic adsorption, reduction, and ion exchange. This flexible PPy membrane therefore shows attractive advantages in wastewater treatment.

Fabrication of electrospun polyamide–weathered basalt nano-composite as a non-conventional membrane for basic and acid dye removal

Abstract

In this study, an adsorptive electrospun polyamide membrane (ESPA) and electrospun polyamide–weathered basalt composite membrane (ESPA-WB) were prepared by an electrospinning process at room temperature. Hence, the WB structure was built as a polymeric membrane separation film in combination with the ESPA matrix as a composite nano-filtration membrane. Then, the ESPA and ESPA-WB membranes were characterized using BET surface area analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy (SEM). To avoid cracks forming during the sintering process, the WB should be added in certain percentages. The microstructures of the prepared membranes were investigated to evaluate their efficiency for basic and acidic dyesʼ removal and their permeation flux. Compared with the ESPA, the ESPA-WB membrane combines the characteristics of WB and ESPA, which greatly enhances the performance of both methylene blue (MB) and methyl orange (MO) dyes removal from synthetic wastewater. The outcomes of this study indicated that the dye uptake in the case of ESPA-WB is higher than that of ESPA, and it decreases with an increase in dye concentrations. The obtained membrane ESPA-WB showed both an excellent anti-dye fouling and a good rejection property for both dyes (i.e. 90% rejection for MB and 74% for MO) with no sign of contamination by the applied dyes. It was found that the structure of the ESPA-WB membrane contains a large number of several adsorption sites which leads to an increase in the removal rate of dyes. Hence, this study demonstrated a non-conventional strategy to prepare an effective adsorptive nano-composite membrane that can be applied as a highly recyclable one for the removal of organic dyes.

Graphic abstract

Novel co-polymerization of polypyrrole/polyaniline on ferrate modified biochar composites for the efficient adsorption of hexavalent chromium in water

It is still a huge challenge to prepare cheap and effective composite materials for removing hexavalent chromium (Cr(VI)) in sewage treatment. In this study, a noval co-polymerization of polypyrrole/polyaniline on ferrate modified biochar (Ppy/PANI/FBC) was fabricated via ferrate-promoted pyrolysis and in-situ oxidative polymerization of pyrrole and aniline molecules to effectively remove Cr(VI) from polluted water. The Ppy/PANI/FBC quickly decreased Cr(VI) concentration from 38.92 to 3.92 mg/L within 400 min, with an efficient removal efficiency (89.92%), which was significantly higher than that of FBC (4.75%), Ppy/FBC (72.30%), and PANI/FBC (42.43%). These results are mainly caused by its conjugated connection and well-dispersion of Ppy and PANI on the surface of a carbon-based material. Meanwhile, the experimental results were in line with the pseudo-second-order kinetic and Freundlich models. The Ppy/PANI/FBC is featured by a high capacity of Cr(VI) adsorption (up to 203.71 mg/g). In addition, it could be adopted for efficiently removing Cr(VI) over a wide pH range (4-9) because of the positively charged nitrogen (-NH^.+- and = N⁺-). The sorption mechanisms of Cr(VI) were identified, including electrostatic interaction with surface protonated nitrogen (N⁺), ion exchange between the doped Cl^- ions and Cr(VI), chemical decrease of the Cr(VI) to Cr(III) by the iron valence cycle and efficient electron transfer of Ppy/PANI/FBC, as well as surface complexation by amine and oxygen-containing groups. More importantly, 97.98% Cr(VI) was efficiently removed in 20 min by coupling a photocatalytic reaction, also providing a novel idea for the practical use of adsorbents in wastewater treatment.

Polypyrrole-based adsorbents for Cr(VI) ions remediation from aqueous solution: a review

Anthropogenic activities are principally responsible for the manifestation of toxic and carcinogenic hexavalent chromium (Cr(VI)) triggering water pollution that threatens the environment and human health. The World Health Organisation (WHO) restricts Cr(VI) ion concentration to 0.1 and 0.05 mg/L in inland surface water and drinking water, respectively. The available technologies for Cr(VI) ion removal from water were highlighted with an emphasis on the adsorption technology. Furthermore, the characteristics of several polypyrrole-based adsorbents were scrutinized including amino-containing compounds, biosorbents, graphene/graphene oxide, clay materials and many other additives with reported effective Cr(VI) ion uptake. This efficiency in Cr(VI) ions adsorption is attributed to enhanced redox properties, increased number of functional groups as well as the synergistic behaviour of the materials making up the composites. The Langmuir isotherm best described the adsorption processes with maximum adsorption capacities ranging from 3.40-961.50 mg/g. The regeneration of Cr(VI) ion-laden adsorbents was studied. Ion exchange, electrostatic attractions, complexation, chelation reactions with protonated sites and reduction were the mechanisms of adsorption. Nevertheless, there are limited details on comprehensive adsorbent regeneration studies to prolong robustness in adsorption-desorption cycles and utilization of the Cr(VI) ion-laden adsorbent in other areas of research to limit the threat of secondary pollution.

Facial Synthesis of Adsorbent from Hemicelluloses for Cr(VI) Adsorption

It is challenging work to develop a low-cost, efficient, and environmentally friendly Cr(VI) adsorbent for waste water treatment. In this paper, we used hemicelluloses from chemical fiber factory waste as the raw material, and prepared two kinds of carbon materials by the green hydrothermal method as adsorbent for Cr(VI). The results showed that hemicelluloses hydrothermally treated with citric acid (HTC) presented spherical shapes, and hemicelluloses hydrothermally treated with ammonia solution (HTC-NH2) provided spongy structures. The adsorption capacity of the samples can be obtained by the Langmuir model, and the adsorption kinetics could be described by the pseudo-second-order model at pH 1.0. The maximum adsorption capacity of HTC-NH2 in the Langmuir model is 74.60 mg/g, much higher than that of HTC (61.25 mg/g). The green hydrothermal treatment of biomass with ammonia solution will provide a simple and feasible way to prepare adsorbent for Cr(VI) in waste water treatment.