Ti3C2 Mxene modified SnNb2O6 nanosheets Schottky photocatalysts with directed internal electric field for tetracycline hydrochloride removal and hydrogen evolution

Wastewater Treatment Using High-Performance In Situ Formed Double-Heterojunction Janus Photocatalyst Microparticles Shaped via a Microfluidic Device

In this work, a heterogeneous photocatalysis system is fabricated for treating wastewater containing organic dyes and pharmaceutical substances. Double-heterojunction Janus photocatalysts are formed on the surface of size-tunable polydimethylsiloxane (PDMS) microparticles shaped via simple and low-cost coflow microfluidic devices. Ag0/Ag0-TiO2/TiO2 Janus-like photocatalysts are synthesized on the surface of porous PDMS microparticles as the support in which the metal-semiconductor heterojunction of Ag0/Ag0-TiO2 and the second heterojunction of Ag0-TiO2/TiO2 are created in situ, leading to the formation of Ag0/Ag0-TiO2/TiO2@PDMS photocatalysis systems. To form the heterojunctions on the PDMS surface, the polymer chain etching method is employed as a desired strategy to have half of the TiO2 nanoparticles on the surface of microparticles, which are treated by a Ag source. Using salt additives and the etching method, PDMS microparticles are made porous, providing more surface area for photoreactions. Surprisingly, the highest decomposition efficiencies of 94.4 and 91.1% are achieved for rhodamine B(RhB) and tetracycline (TC), respectively, under visible light for 60 min pH 11, a light source at a distance of 2 cm, 5 mM AgNO3, 10 wt % TiO2, 7 wt % NaCl, and 20 gm/L photocatalyst, which are conditions that result in the best performance for RhB degradation. Regarding the stability of the photocatalysts, no significant change is observed in the performance after five cycles.

Recyclable MXene-bridged Z-scheme NiFe2O4/MXene/Bi2WO6 heterojunction with enhanced charge separation for efficient sonocatalytic removal of ciprofloxacin

Sonocatalysis has emerged as a promising technology for addressing environmental pollution issues. However, the efficacy of sonocatalytic processes is primarily hindered by challenges related to the sluggish flow rate of photogenerated electrons. This study presents a novel approach to address this issue by developing an improved Z-scheme NiFe2O4/MXene/Bi2WO6 (NMB) composite that exhibits exceptional sonocatalytic activity for ciprofloxacin (CIP) degradation. In particular, the NiFe2O4/MXene (5 wt%)/Bi2WO6 composite could achieve high CIP (at 10 mg/L) degradation efficiency (97.39 %) after 60 min of ultrasonic irradiation. The exceptional sonocatalytic activity of the composite was attributed to the synergistic interaction of the Z-scheme heterojunction charge transfer route and the electron mediator of Ti3C2-MXene, which enhances light collection capacity, separates photogenerated carriers efficiently, and improves redox activity of the composite. The scavenging experiments reveal that the sonocatalytic degradation of CIP was driven by holes (h+), hydroxyl radicals (•OH), and superoxide anion radicals (•O2-), with the former playing a dominant role. The results of reuse experiments demonstrate the outstanding sonocatalytic stability of the catalyst, as well as its uncomplicated recovery. The developed NMB Z-scheme composite shows promise for sonocatalytic treatment of antibiotics in industrial wastewaters, particularly those with high turbidity and/or low transparency. The findings also open up avenues for developing efficient and cost-effective sonocatalysts with good recyclability and remarkable performance.

Environmental remediation of hazardous pollutants using MXene-perovskite-based photocatalysts: A review

Photocatalysis utilizing semiconductors offer a cost-effective and promising solution for the removal of pollutants. MXene and perovskites, which possess desirable properties such as a suitable bandgap, stability, and affordability, have emerged as a highly promising material for photocatalytic activity. However, the efficiency of MXene and perovskites is limited by their fast recombination rates and inadequate light harvesting abilities. Nonetheless, several additional modifications have been shown to enhance their performance, thereby warranting further exploration. This study delves into the fundamental principles of reactive species for MXene-perovskites. Various methods of modification of MXene-perovskite-based photocatalysts, including Schottky junction, Z-scheme and S-scheme are analyzed with regard to their operation, differences, identification techniques and reusability. The assemblance of heterojunctions is demonstrated to enhance photocatalytic activity while also suppressing charge carrier recombination. Furthermore, the separation of photocatalysts through magnetic-based methods is also investigated. Consequently, MXene-perovskite-based photocatalysts are seen as an exciting emerging technology that necessitates further research and development.

Efficient activation of persulfate by Ti3C2 MXene QDs modified ZnFe2O4 for the rapid degradation of tetracycline

Mxene-based catalysts with specific interfacial characteristics are beneficial for photocatalytic applications. Herein, Ti₃C₂ MXene modified ZnFe₂O₄ nanocomposite materials were prepared for photocatalysis. The morphology and structure of the nanocmposites were characterized by scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), which revealed that Ti₃C₂ MXene as quantum dots (QDs) was uniformly distributed on the ZnFe₂O₄ surface. The Ti₃C₂ QDs modified ZnFe₂O₄ catalyst (ZnFe₂O₄/MXene-15%) under visible light achieved 87% degradation efficiency of tetracycline within 60 min when coupled with persulfate (PS) system. The initial solution pH, PS dosage and co-existing ions were found to be the main factors affecting the heterogeneous oxidation process, while quenching experiments showed that O₂^•- is the main oxidizing species in the removal of tetracycline in ZnFe₂O₄/MXene-PS system. In addition, the cyclic experiments suggested that ZnFe₂O₄/MXene had good stability and thus it may have practical applications in industry.

MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review

The rapid increase in the global population and its ever-rising standards of living are imposing a huge burden on global resources. Apart from the rising energy needs, the demand for freshwater is correspondingly increasing. A population of around 3.8 billion people will face water scarcity by 2030, as per the reports of the World Water Council. This may be due to global climate change and the deficiency in the treatment of wastewater. Conventional wastewater treatment technologies fail to completely remove several emerging contaminants, especially those containing pharmaceutical compounds. Hence, leading to an increase in the concentration of harmful chemicals in the human food chain and the proliferation of several diseases. MXenes are transition metal carbide/nitride ceramics that primarily structure the leading 2D material group. MXenes act as novel nanomaterials for wastewater treatment due to their high surface area, excellent adsorption properties, and unique physicochemical properties, such as high electrical conductivity and hydrophilicity. MXenes are highly hydrophilic and covered with active functional groups (i.e., hydroxyl, oxygen, fluorine, etc.), which makes them efficient adsorbents for a wide range of species and promising candidates for environmental remediation and water treatment. This work concludes that the scaling up process of MXene-based materials for water treatment is currently of high cost. The up-to-date applications are still limited because MXenes are currently produced mainly in the laboratory with limited yield. It is recommended to direct research efforts towards lower synthesis cost procedures coupled with the use of more environmentally friendly materials to avoid secondary contamination.

Nanoarchitecture of a Ti3C2@TiO2 Hybrid for Photocatalytic Antibiotic Degradation and Hydrogen Evolution: Stability, Kinetics, and Mechanistic Insights

Designing of a visible-light-driven semiconductor-based heterojunction with suitable band alignment and well-defined interfacial contact is considered to be an effective strategy for the transformation of solar-to-chemical energy and environmental remediation. In this context, MXenes have received tremendous attention in the research community due to their merits of abundant derivatives, elemental composition, excellent metallic conductivity, and surface termination groups. Meanwhile, a facile synthetic strategy for MXene-derived TiO₂ nanocomposites with stable framework and higher photocatalytic activity under visible-light irradiation still remains a challenge for researchers. Herein, we report a novel synthetic strategy of preparing a two-dimensional Ti₃C₂@TiO₂ nanohybrid by a facile reflux method under acidic conditions. In this oxidation reaction, protonation of the hydroxyl terminal group of MXene creates Ti more electrophilic and susceptible to an oxidative nucleophilic addition reaction with the presence of both water and oxygen. The physicochemical properties of the nanohybrid Ti₃C₂@TiO₂ were verified by varieties of characterization techniques. High-resolution transmission electron microscopy and X-ray photoelectron spectroscopy analysis specifically elucidated the intimate interfacial interaction between Ti₃C₂ and TiO₂. The optimized Ti₃C₂@TiO₂-48 h photocatalyst exhibited the highest tetracycline hydrochloride (TCH, 90% in 90 min) degradation efficiency in comparison to pristine TiO₂ with a rate constant (k) of 0.02463 min^-1. The major contribution of ^•O₂^- and ^•OH radicals throughout photocatalytic TCH degradation was confirmed by the trapping experiment. Moreover, the photocatalyst showed the highest hydrogen generation rate of 140.8 μmol h^-1 along with an apparent conversion efficiency of 2.2%. The excellent photocatalytic activity of Ti₃C₂@TiO₂ originated from the superior electrical conductivity of cocatalyst Ti₃C₂, which facilitated spatial photogenerated e^-/h⁺ separation and transfer at the Ti₃C₂ MXene@TiO₂ interface. Overall, this research work will describe a promising protocol of designing MXene-derived photocatalysts toward efficient environmental remediation and wastewater treatment applications.

Co-catalyst and heterojunction dual strategies to induce photogenerated charge separation for efficient hydrogen evolution of CdS

The construction of heterojunctions is considered to be an important means to promote efficient electron-hole separation in photocatalysts. However, photocatalysts have poor light absorption ability and a relatively small chance of capturing H⁺, and the stability needs to be improved. In this work, a non-precious metal co-catalyst Cu₃P was introduced for the successful construction of p-n heterojunctions from NiO and CdS to promote charge separation while expanding the light absorption capacity and increasing the chance of H⁺ capture, thus enhancing the photocatalytic hydrogen precipitation activity and stability. The overall photocatalytic performance was improved by continuously optimizing the loading of NiO and Cu₃P. Satisfyingly, using a 5 W LED lamp as the light source, the hydrogen evolution rate of the composite photocatalyst 15NC@Cu-10 in 10 vol% lactic acid solution is 15 612.0 μmol h^-1 g^-1, and the AQE reaches 10.4%. XPS analysis confirmed the direction and path of electron transfer. This synergistic strategy of co-catalyst modification of p-n heterojunctions provides a unique insight into the preparation of efficient and stable photocatalysts and also expands the applications of MOFs and their derivatives in the field of photocatalysis.

Rapid growth of MXene-based membranes for sustainable environmental pollution remediation

Water consumption has grown in recent years due to rising urbanization and industry. As a result, global water stocks are steadily depleting. As a result, it is critical to seek strategies for removing harmful elements from wastewater once it has been cleaned. In recent years, many studies have been conducted to develop new materials and innovative pathways for water purification and environmental remediation. Due to low energy consumption, low operating cost, and integrated facilities, membrane separation has gained significant attention as a potential technique for water treatment. In these directions, MXene which is the advanced 2D material has been explored and many applications were reported. However, research on MXene-based membranes is still in its early stages and reported applications are scatter. This review provides a broad overview of MXenes and their perspectives, including their synthesis, surface chemistry, interlayer tuning, membrane construction, and uses for water purification. Application of MXene based membrane for extracting pollutants such as heavy metals, organic contaminants, and radionuclides from the aqueous water bodies were briefly discussed. Furthermore, the performance of MXene-based separation membranes is compared to that of other nano-based membranes, and outcomes are very promising. In order to shed more light on the advancement of MXene-based membranes and their operational separation applications, significant advances in the fabrication of MXene-based membranes is also encapsulated. Finally, future prospects of MXene-based materials for diverse applications were discussed.

A Review on MXene Synthesis, Stability, and Photocatalytic Applications

Photocatalytic water splitting, CO₂ reduction, and pollutant degradation have emerged as promising strategies to remedy the existing environmental and energy crises. However, grafting of expensive and less abundant noble-metal cocatalysts on photocatalyst materials is a mandatory practice to achieve enhanced photocatalytic performance owing to the ability of the cocatalysts to extract electrons efficiently from the photocatalyst and enable rapid/enhanced catalytic reaction. Hence, developing highly efficient, inexpensive, and noble-metal-free cocatalysts composed of earth-abundant elements is considered as a noteworthy step toward considering photocatalysis as a more economical strategy. Recently, MXenes (two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides) have shown huge potential as alternatives for noble-metal cocatalysts. MXenes have several excellent properties, including atomically thin 2D morphology, metallic electrical conductivity, hydrophilic surface, and high specific surface area. In addition, they exhibit Gibbs free energy of intermediate H atom adsorption as close to zero and less than that of a commercial Pt-based cocatalyst, a Fermi level position above the H₂ generation potential, and an excellent ability to capture and activate CO₂ molecules. Therefore, there is a growing interest in MXene-based photocatalyst materials for various photocatalytic events. In this review, we focus on the recent advances in the synthesis of MXenes with 2D and 0D morphologies, the stability of MXenes, and MXene-based photocatalysts for H₂ evolution, CO₂ reduction, and pollutant degradation. The existing challenges and the possible future directions to enhance the photocatalytic performance of MXene-based photocatalysts are also discussed.

MXenes as Emerging Materials: Synthesis, Properties, and Applications

Due to their unique layered microstructure, the presence of various functional groups at the surface, earth abundance, and attractive electrical, optical, and thermal properties, MXenes are considered promising candidates for the solution of energy- and environmental-related problems. It is seen that the energy conversion and storage capacity of MXenes can be enhanced by changing the material dimensions, chemical composition, structure, and surface chemistry. Hence, it is also essential to understand how one can easily improve the structure-property relationship from an applied point of view. In the current review, we reviewed the fabrication, properties, and potential applications of MXenes. In addition, various properties of MXenes such as structural, optical, electrical, thermal, chemical, and mechanical have been discussed. Furthermore, the potential applications of MXenes in the areas of photocatalysis, electrocatalysis, nitrogen fixation, gas sensing, cancer therapy, and supercapacitors have also been outlooked. Based on the reported works, it could easily be observed that the properties and applications of MXenes can be further enhanced by applying various modification and functionalization approaches. This review also emphasizes the recent developments and future perspectives of MXenes-based composite materials, which will greatly help scientists working in the fields of academia and material science.

Self-powered Aptasensors Made with the In2O3-In2S3-Ti3C2 Composite for Dual-mode Detection of Microcystin-LR

A dual-mode self-powered aptasensing platform of photoelectrochemical (PEC) and photofuel cell (PFC) was constructed for Microcystin-LR (MC-LR) detection. Specifically, the In₂O₃-In₂S₃-Ti₃C₂ (IO-IS-TC) composite was facilely assembled on the base of MOF-derived In₂O₃ hollow tubulars, and the integrated mechanism and photoconversion efficiency are proposed and discussed in detail. Herein, a promising dual-mode sensing platform was constructed using the IO-IS-TC composite as a photoanode matrix with higher output power and obvious photocurrent response. Moreover, the dual-mode sensing platform did not require external bias and the addition of sacrificial agents under visible light irradiation. The enhanced PEC properties can be attributed to the matched energy level of ternary components and the improved separation of photogenerated carriers. Moreover, aptamer-based recognition was adopted to catch MC-LR molecules, which realized the highly sensitive and selective detection. The PFC aptasensor was exhibited at 50-5 × 10⁵ pmol/L with a detection limit of 17.4 pmol/L, and the PEC aptasensor was realized from 0.5 to 4 × 10⁵ pmol/L with a detection limit of 0.169 pmol/L. The proposed aptasensing platform showed good specificity, reproducibility, and stability, which paved the way for the construction of a fast and ultrasensitive PEC sensing methodology for environmental analysis.

Highly dispersed of Ag/AgCl nanoparticles on exfoliated FeOCl nanosheets as photo-Fenton catalysts for pollutants degradation via accelerating Fe(II)/Fe(III) cycle

In this work, Ag/AgCl/FeOCl (Ag-Fe) catalysts were successfully prepared via multistep routes in which Ag was uniformly anchored to the enriched Cl sites provided by exfoliated FeOCl nanosheets. Among these Ag-Fe catalysts, 5% Ag-Fe exhibited the highest pseudo first-order kinetic constant 0.1056 min^-1 for photo-Fenton degradation of Rhodamine B (RhB), which was 11 times higher than that of FeOCl (0.0096 min^-1). Ag-Fe catalysts exposed more coordinatively unsaturated Fe active sites to coordinate with H₂O₂ due to the cleavage of Fe-Cl bond. The exposed coordinatively unsaturated Fe(III) active sites could capture the photoinduced electrons and reduce them to Fe(II), which boosted the separation efficiency of photogenerated charge carriers. Meanwhile, the photogenerated electrons of Ag⁰ transferred to the FeOCl, promoting the reduction of Fe(III) to Fe(II). In addition, the intensified visible light adsorption (SPR effect) was achieved after introducing Ag/AgCl nanoparticles on exfoliated FeOCl. Hydroxyl radicals (·OH) and holes (h⁺) were determined as the main reactive oxidative species (ROS) in the photo-Fenton degradation process.

Emerging architecture titanium carbide (Ti3C2Tx) MXene based photocatalyst toward degradation of hazardous pollutants: Recent progress and perspectives

MXenes family has aroused marvelous consideration as a frontier photoactive candidate for solar energy transformation and environmental remediation. 2D Ti₃C₂ exhibit a unique layered microstructure, large surface functional groups (-F, -OH, -O), substantial sorption selectivity, superior reduction efficiency, and electrical conductivity. Electronically conductive Ti₃C₂T_x with tunable energy band gap (0.92-1.75eV) makes it one of the most potential photoactive materials for photodegradation. The present review paper aims to design cost-effective heterojunctions and Schottky junctions of Ti₃C₂ with transition metal oxides, sulfides, g-C₃N₄, and other organic frameworks. The discussion mainly involves different aspects related to its tunable electronic structure, stability problems, and surface morphology control. In addition, the advantages of Ti₃C₂ in fabricating highly efficient Ti₃C₂ based catalytic junctions exhibiting suppressed charge carrier recombination are discussed with particular emphasis on their adsorption and redox properties for the removal of toxic dyes, heavy metal ions, and various pharmaceuticals. Finally, current challenges and research directions are outlined and prospected for the future development of Ti₃C₂ based photocatalytic systems.

MXenes as emerging nanomaterials in water purification and environmental remediation

Environmental pollution has accelerated and intensified because of the acceleration of industrialization, therefore fabricating excellent materials to remove hazardous pollutants has become inevitable. MXenes as emerging transition metal nitrides, carbides or carbonitrides with high conductivity, hydrophilicity, excellent structural stability, and versatile surface chemistry, become ideal candidates for water purification and environmental remediation. Particularly, MXenes reveal excellent sorption capability and efficient reduction performance for various contaminants of wastewater. In this regard, a comprehensive understanding of the removal behaviors of MXene-based nanomaterials is necessary to explain how they remove various pollutants in water. The eliminate process of MXene-based nanomaterials is collectively influenced by the physicochemical properties of the materials themselves and the chemical properties of different contaminants. Therefore, in this review paper, the synthesis strategies and properties of MXene-based nanomaterials are briefly introduced. Then, the chemical properties, removal behaviors and interaction mechanisms of heavy metal ions, radionuclides, and organic pollutants by MXene-based nanomaterials are highlighted. The overview also emphasizes associated toxicity, secondary contamination, the challenges, and prospects of the MXene-based nanomaterials in the applications of water treatment. This review can supply valuable ideas for fabricating versatile MXene nanomaterials in eliminating water pollution.

MXene-based hybrid composites as photocatalyst for the mitigation of pharmaceuticals

Environmental contamination is a burning issue and has gained global attention in the present era. Pharmaceuticals are emerging contaminants affecting the natural environment worldwide owing to their extensive consumption particularly in developing countries where self-medication is a common practice. These pharmaceuticals or their degraded active metabolites enter water bodies via different channels and are continuous threat to the whole ecological system. There is a dire need to find efficient approaches for their removal from all environmental matrices. Photocatalysis is one of the most effective and simple approach, however, finding a suitable photocatalyst is a challenging task. Recently, MXenes (two-dimensional transition metal carbides/nitrides), a relatively new material has attracted increasing interest as photocatalysts due to their exceptional properties, such as large surface area, appreciable safety, huge interlayer spacing, thermal conductivity, and environmental flexibility. This review describes the recent advancements of MXene-based composites and their photocatalytic potential for the elimination of pharmaceuticals. Furthermore, present limitations and future research requirements are recommended to attain more benefits of MXene-based composites for the purification of wastewater.

Constructing a WC/NCN Schottky Junction for Rapid Electron Transfer and Enrichment for Highly Efficient Photocatalytic Hydrogen Evolution

The low charge-transfer efficiency and slow surface reaction kinetics are the main factors affecting the performance of carbon nitride photocatalysts. Here, a Schottky heterostructure (WCN) was constructed by combining WC with porous carbon nitride nanosheets with a cyanide group (NCN). The Schottky junction provides a convenient way for photoinduced electrons to transfer and promotes the effective separation of photoinduced carriers. Furthermore, due to the good conductivity of WC and an electronic structure similar to Pt, the W atom in WC as the active site of hydrogen production can realize efficient reaction kinetics. In this way, the WCN Schottky heterostructure showed a 2.0- and 5.0-fold enhancement in photocatalytic H₂ evolution as compared to the single NCN component under visible-light and near-infrared light irradiation. By combining with theoretical simulations, as an electron acceptor in the WCN heterostructure, WC can effectively improve the charge-transfer efficiency and also act as an active site for hydrogen production.

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Antibiotic pollution is a major health issue inducing antibiotic resistance and the inefficiency of actual drugs, thus calling for improved methods to clean water and wastewater. Here we review the recent development of heterojunction photocatalysis and application in degrading tetracycline. We discuss mechanisms for separating photogenerated electron-hole pairs in different heterojunction systems such as traditional, p-n, direct Z-scheme, step-scheme, Schottky, and surface heterojunction. Degradation pathways of tetracycline during photocatalysis are presented. We compare the efficiency of tetracycline removal by various heterojunctions using quantum efficiency, space time yield, and figures of merit. Implications for the treatment of antibiotic-contaminated wastewater are discussed.

SnNb2O6/NiCo-LDH Z-scheme heterojunction with regulated oxygen vacancies obtained by engineering the crystallinity for efficient and renewable photocatalytic H2 evolution

SnNb2O6/NiCo-LDH Z-scheme heterojunction with abundant oxygen vacancies exhibited highly activity and stability toward photocatalytic H2 evolution, ascribed to the regeneration of oxygen vacancy by engineering the crystallinity.