Rational design of Z-scheme ZnFe2O4/Ag@Ag2CO3 hybrid with enhanced photocatalytic activity, stability and recovery performance for tetracycline degradation

Fasting-Mimicking Diet Facilitates Anti-tumor Therapeutic Effects by Nutrient-Sensitive Nanocomposites

Cancer cells support their uncontrolled proliferation primarily by regulating energy metabolism. Inhibiting tumor growth by blocking the supply of nutrients is an effective treatment strategy. Fasting-mimicking diet (FMD), as a low-calorie, low-protein, low-sugar, high-fat diet, can effectively reduce the nutrient supply to tumor cells. However, the significant biological barrier presented by the tumor microenvironment imposes greater demands and challenges for drug design. This study constructs the multifunctional nanocomposite ZnFe2O4@TiO2@CHC@Orl-FA (ZTCOF), which has great potential to overcome the aforementioned drawbacks. ZnFe2O4@TiO2 could produce 1O2 with ultrasound, and stimulate the Fenton-like conversion of endogenous H2O2 to ·OH, achieving a combined therapeutic effect of sonodynamic therapy (SDT) and chemodynamic therapy (CDT). Orl (Orlistat) and CHC (α-cyano-4-hydroxycinnamic acid) not only block tumor cell energy metabolism but also increase sensitivity to reactive oxygen species, enhancing the cytotoxic effect on tumor cells. Furthermore, combining the treatment strategies with FMD condition control can further inhibit cancer cell energy metabolism, achieving significant synergistic anti-tumor therapy. Both in vitro and in vivo experiments confirm that ZTCOF with SDT/CDT/starvation can achieve effective tumor suppression and destruction. This work provides theoretical and technical support for anti-tumor multimodal synergistic therapy.

Improved visible light triggered photocatalytic activities of BiOCl photocatalysts via a synergistic effect of doping and heterojunction engineering

To manipulate the photocatalytic activities of BiOCl photocatalysts, doping and heterojunction engineering are simultaneously adopted. Herein, the photocatalysts Sm3+-doped BiOCl and BiOCl:Sm3+@yg-C3N4 were designed, in which their phase structure, morphology, optical properties and photocatalytic activities were systematically discussed. Excited at 408 nm, red emissions are seen from Sm3+-doped BiOCl microplates and their intensities were impacted by doping content, reaching the maximum value when the Sm3+ content was 1 mol% and the involved concentration mechanism was dominated by quadrupole-quadrupole interaction. Through analyzing the degradation of TC, the visible light triggered photocatalytic behaviors of the resultant compounds were studied. Compared with BiOCl microplates, an improved TC removal ability was seen in Sm3+-doped BiOCl microplates and the products with a Sm3+ content of 0.5 mol% show the best performance. Moreover, through constructing the heterojunction with g-C3N4, the TC removal capacity was further enhanced and the BiOCl:Sm3+@60%g-C3N4 exhibits the optimal photocatalytic activity, which was also much better than that of the commercial SnO2 and TiO2. Accordingly, the ˙O2-, h+ and ˙OH active species were proven to contribute to the involved visible light driven photocatalytic mechanism. Furthermore, the separation and recombination of photogenerated carries via the Z-scheme transfer process in the designed heterojunction composites, led to splendid photocatalytic properties. Additionally, it was verified that the TC solution treated with synthesized compounds was nontoxic toward plant growth. Our findings may propose an available route to regulate the photocatalytic performance of the visible light driven photocatalysts.

Synthesizing Ag2Ox(3 wt%)-loaded ZnFe2O4 photocatalysts for efficiently saving polluted aquatic ecosystems

Herein, we report an Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts synthesized by co-precipitation and incipient wet impregnation approach for acetamiprid degradation, antibacterial, antioxidant, and toxicity assay. Initially, bare ZnFe2O4 nanostructures were made through a simple co-precipitation method. In the second step, 3 wt% of various transition metal oxides (CuOx, ZrOx, and Ag2Ox) were embedded on the surface of ZnFe2O4 photocatalysts via a wet impregnation method. Further, the prepared photocatalysts were systematically characterized using XRD, FTIR, FE-SEM, BET, HRTEM, and XPS analysis. The optimum Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts revealed higher degradation efficiencies for acetamiprid under sunlight irradiation. Additionally, the Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts showed more effective antioxidant and antibacterial activity than blank and bare ZnFe2O4 nanomaterials. The enriched catalytic efficiency can be accredited to the 3 wt% of Ag2Ox NPs loaded on ZnFe2O4 nanomaterials, possibly due to the boosted transport properties of the electron-hole pairs. This study will provide a new avenue for the development of simple and effective photocatalysts for efficiently saving polluted aquatic ecosystems.

Magnetic reed biochar materials as adsorbents for aqueous copper and phenol removal

Organics and heavy metals are common pollutants in many wastewaters and water bodies. Adsorption processes by magnetic materials can rapidly remove these pollutants from water and effectively recycle adsorbent. In this study, magnetic analyzer, X-ray diffraction, Flourier transform infrared spectroscopy, and granulometry were used to characterize the synthesized magnetic reed biochar materials (ZnFe₂O₄/biochar). Influences of adsorption time, pH, temperature, initial solution concentration, and adsorption equilibrium concentration on adsorption performances were investigated for Cu²⁺ and phenol adsorption by ZnFe₂O₄/biochar. Adsorption kinetic and isotherm models were used to describe the adsorption processes. Adsorption of phenol and Cu²⁺ by ZnFe₂O₄/biochar reached saturation within 45 min and increased slightly with the increase of temperature from 15 to 45 °C. Adsorption of Cu²⁺ increased with the increase of pH, while the adsorption of phenol peaked at pH = 6. The adsorption processes fit the pseudo-second order kinetics model, and both conformed to the Langmuir model. The fitting results show that the maximum single-component adsorption capacity of phenol and Cu²⁺ by ZnFe₂O₄/biochar is 63.29 and 12.20 mg/g, and the maximum bi-component adsorption capacity reaches 40.16 and 9.48 mg/g, respectively. All the findings demonstrate that ZnFe₂O₄/biochar has good adsorption performance for phenol and Cu²⁺.

In Situ Coupling Carbon Defective C3N5 Nanosheet with Ag2CO3 for Effective Degradation of Methylene Blue and Tetracycline Hydrochloride

The development of novel catalysts for degrading organic contaminants in water is a current hot topic in photocatalysis research for environmental protection. In this study, C₃N₅ nanosheet/Ag₂CO₃ nanocomposites (CNAC-X) were used as efficient photocatalysts for the visible-light-driven degradation of methylene blue (MB), and tetracycline hydrochloride (TC-HCl) was synthesized for the first time using a simple thermal oxidative exfoliation and in situ deposition method. Due to the synergistic effect of nanosheet structures, carbon defects, and Z-scheme heterojunctions, CNAC-10 exhibited the highest photocatalytic activity, with photodegradation efficiencies of 96.5% and 97.6% for MB (60 mg/L) and TC-HCl (50 mg/L) within 90 and 100 min, respectively. The radical trapping experiments showed that ·O₂^- and h⁺ played major roles in the photocatalytic effect of the CNAC-10 system. Furthermore, intermediates in the photodegradation of MB and TC-HCl were investigated to determine possible mineralization pathways. The results indicated that C₃N₅ nanosheet/Ag₂CO₃ photocatalysts prepared in this work could provide an effective reference for the treatment of organic wastewater.

In suit constructing S-scheme FeOOH/MgIn2S4 heterojunction with boosted interfacial charge separation and redox activity for efficiently eliminating antibiotic pollutant

Photocatalytic elimination of antibiotic pollutant is an appealing avenue in response to the water contamination, but it still suffers from sluggish charge detachment, limited redox capacity as well as poor visible light utilization. Herein, a particular S-scheme FeOOH/MgIn₂S₄ heterojunction with wide visible light absorption was triumphantly constructed by in-situ growth of MgIn₂S₄ nanoparticles onto the surface of FeOOH nanorods, and employed as a high-efficiency visible light driven photocatalyst for removing tetracycline (TC). Conspicuously, the as-obtained FeOOH(15 wt%)/MgIn₂S₄ elucidated the optimal TC removal rate of 0.01258 min^-1 after 100 min of visible light illumination, which was almost 33.1 and 6.6 times larger than those of neat FeOOH and MgIn₂S₄, separately. The exceptional degradation performance was principally put down to the establishment of S-scheme heterojunction between FeOOH and MgIn₂S₄, which could not merely accelerate the detachment of photogenerated carriers, but also retain the powerful reducing ability of photoinduced electrons for MgIn₂S₄ and high oxidizing capacity of photoexcited holes for FeOOH, strongly driving the generation of plentiful active species including holes, superoxide and hydroxyl radicals. Additionally, the possible degradation mechanism and pathways of TC were also speculated. This work offers a valuable perspective for constructing high-efficiency S-scheme heterojunction photocatalysts for eradicating antibiotics.

Construction of Au and C60 quantum dots modified materials of Institute Lavoisier-125(Ti) architectures for antibiotic degradation: Performance, toxicity assessment, and mechanistic insight

High-performance and stabilized photocatalytic degradation of antibiotic contaminants still remains a challenge in environmental photocatalysis and has been studied worldwide. In this work, hybrid Au and C60 quantum dots decorated Materials of Institute Lavoisier-125(Ti) (MIL-125(Ti)) composites were successfully fabricated for visible-light photocatalytic tetracycline degradation with pristine MIL-125(Ti) as a comparison. The experimental results revealed that the introduction of C60 quantum dots and Au nanoparticles resulted in highly enhanced visible-light harvesting and charge separation for efficient tetracycline degradation. The optimal Au/C60-MIL-125(Ti)-1.0% sample exhibited the highest visible-light photocatalytic performance, and the corresponding rate constant was approximately 9.19 times of MIL-125(Ti), indicating the significant roles of Au and C60 quantum dots in boosting visible-light absorption and charge separation. Furthermore, the radical species, possible degradation pathways and toxicity assessment, and photocatalytic mechanism were also investigated. Current work indicates a synergistic strategy for enhancing visible-light harvesting and charge separation to fabricate high-performance composite photocatalysts.