Dually organic modified bentonite with enhanced adsorption and desorption of tetracycline and ciprofloxacine

A waste-to-wealth conversion of plastic bottles into effective carbon-based adsorbents for removal of tetracycline antibiotic from water

Currently, plastic waste and antibiotic wastewater are two of the most critical environmental problems, calling for urgent measures to take. A waste-to-wealth strategy for the conversion of polyethylene terephthalate (PET) plastic bottles into value-added materials such as carbon composite is highly recommended to clean wastewater contaminated by antibiotics. Inspired by this idea, we develop a novel PET-AC-ZFO composite by incorporating PET plastic-derived KOH-activated carbon (AC) with ZnFe2O4 (ZFO) particles for adsorptive removal of tetracycline (TTC). PET-derived carbon (PET-C), KOH-activated PET-derived carbon (PET-AC), and PET-AC-ZFO were characterized using physicochemical analyses. Central composite design (CCD) was used to obtain a quadratic model by TTC concentration (K), adsorbent dosage (L), and pH (M). PET-AC-ZFO possessed micropores (d ≈ 2 nm) and exceptionally high surface area of 1110 m2 g-1. Nearly 90% TTC could be removed by PET-AC-ZFO composite. Bangham kinetic and Langmuir isotherm were two most fitted models. Theoretical maximum TTC adsorption capacity was 45.1 mg g-1. This study suggested the role of hydrogen bonds, pore-filling interactions, and π-π interactions as the main interactions of the adsorption process. Thus, a strategy for conversion of PET bottles into PET-AC-ZFO can contribute to both plastic recycling and antibiotic wastewater mitigation.

Dimension-controlled synthesis of BiOI for efficient visible light photodegradation of tetracycline: role of pore structure

The transformation of photogenerated charge carriers (PC) in variable dimensional photocatalyst plays a pivotal role in unraveling the generation of reactive species (RS). However, the dimensional structure-activity relationship in photocatalysis remains elusive, with limited insights into its intricacies. Herein, we report a controlled synthesis strategy by using polyvinyl pyrrolidone (PVP)-assisted precipitation method for BiOI photocatalyst. Due to the steric hindrance of PVP, the 3D microsphere (3D-PVP0.5) and porous structure (3D-PVP1) of BiOI catalysts have been successfully prepared at room temperature. The 3D-PVP1 photocatalyst contains abundant mesopores and larger pores, which significantly shorten the diffusion distance of PC. Also, these PC in porous structure is beneficial for transferring from the inner phase to the surface of materials. Combined with optical property and radicals trapping experiments, the recombination rate of PC in porous structure performs a significant decrease, leading to the generation of more dominated ROS (•O2- and h+). The •O2- played a dominated role (86.98% of contribution rate) in photodegradation of tetracycline (TC) in 3D-PVP1 photocatalytic process. Compared with 2D nanosheet of BiOI (16.7% removal rate of TC), the as-prepared 3D porous structure of BiOI catalyst exhibits unique stable and high removal capacities (90.5%) for TC photodegradation under visible light irradiation. The kobs of 3D-PVP1 photocatalyst increased by 5.1 times than that of 2D nanosheet. To investigate its practical application, the effects of inorganic anions and pH have been systematically studied. This work sheds light on the design of variable dimension BiOI catalyst and provides more insight into the transfer mechanism of PC.

Tailoring the porosity of chemically activated carbons derived from the HTC treatment of sewage sludge for the removal of pollutants from gaseous and aqueous phases

The management of sewage sludge is currently an open issue due to the large volume of waste to be treated and the necessity to avoid incineration or landfill disposal. Hydrothermal carbonization (HTC) has been recognized as a promising thermochemical technique to convert sewage sludge into value-added products. The hydrochar (HC) obtained can be suitable for environmental application as fuel, fertilizer, and sorbent. In this study, activated hydrochars (AHs) were prepared from sewage sludge through HTC followed by chemical activation with potassium hydroxide (KOH) and tested for the removal of pollutants in gaseous and aqueous environments, investigating carbon dioxide (CO2) and ciprofloxacin (CIP) adsorption capacity. The effects of activation temperature (550-750 °C) and KOH/HC impregnation ratio (1-3) on the produced AHs morphology and adsorption capacity were studied by Response Surface Methodology (RSM). The results of RSM analysis evidenced a maximum CO2 uptake of 71.47 mg/g for mild activation conditions (600-650 °C and KOH/HC = 1 ÷ 2), whereas the best CIP uptake of 628.61 mg/g was reached for the most severe conditions (750 °C, KOH/HC = 3). The prepared AHs were also applied for the removal of methylene blue (MB) from aqueous solutions, and the MB uptake results were used for estimating the specific surface area of AHs. High surface areas up to 1902.49 m2/g were obtained for the highest activation temperature and impregnation ratio investigated. Predictive models of CO2 and CIP uptake were developed by RSM analysis, and the optimum activation conditions for maximizing the adsorption performance together with high AH yield were identified: 586 °C and KOH/HC ratio = 1.34 for maximum yield (26.33 %) and CO2 uptake (67.31 mg/g); 715 °C and KOH/HC ratio = 1.78 for maximum yield (18.75 %) and CIP uptake (370.77 mg/g). The obtained results evidenced that chemical activation of previously HTC-treated sewage sludge is a promising way to convert waste into valuable low-cost adsorbents.

Application of the Aliivibrio fischeri bacterium bioassay for assessing single and mixture effects of antibiotics and copper

The Aliivibrio fischeri bioassay was successfully applied in order to evaluate the acute effect of sulfamethoxazole (SMX), ciprofloxacin (CIP), chlortetracycline (CTC) and copper (Cu), alone or in binary, ternary, and overall mixture. The toxicity results are reported in terms of both effective concentrations, which inhibited 50% of the bacterium bioluminescence (EC50%), and in Toxic Units (TUs). The TUs were compared with predicted values obtained using the Concentration Addition model (CA). Finally, the toxicity of water extracts from a soil contaminated by the three antibiotics (7 mg Kg-1 each) in the presence/absence of copper (30 mg Kg-1) was also evaluated. Copper was the most toxic chemical (EC50: 0.78 mg L-1), followed by CTC (EC50: 3.64 mg L-1), CIP (96 mg L-1) and SMX (196 mg L-1). Comparing the TU and CA values of the mixtures, additive effects were generally found. However, a synergic action was recorded in the case of the CIP+Cu co-presence and antagonistic effects in the case of CTC+Cu and the ternary mixture (containing each antibiotic at 0.7 mg L-1), were identified. Soil water extracts did not show any toxicity, demonstrating the buffering ability of the soil to immobilize these chemicals.

Biochar-layered double hydroxide composites for the adsorption of tetracycline from water: synthesis, process modeling, and mechanism

Antibiotic-contaminated water is a crucial issue worldwide. Thus, in this study, the MgFeCa-layered double hydroxides were supported in date palm-derived biochar (B) using co-precipitation, hydrothermal, and co-pyrolysis methods. It closes gaps in composite design for pharmaceutical pollutant removal, advances eco-friendly adsorbents, and advances targeted water cleanup by investigating synthesis methodologies and gaining new insights into adsorption. The prepared B-MgFeCa composites were investigated for tetracycline (TC) adsorption from an aqueous solution. The B-MgFeCa composites synthesized through co-precipitation and hydrothermal methods exhibited better crystallinity, functional groups, and well-developed LDH structure within the biochar matrix. However, the co-pyrolysis method resulted in the LDH structure breakage, leading to the low crystalline composite material. The maximum adsorption of TC onto all B-MgFeCa was obtained at an acidic pH range (4-5). The B-MgFeCa composites produced via hydrothermal and co-pyrolysis methods showed higher and faster TC adsorption than the co-precipitation method. The kinetic results can be better described by Langmuir kinetic and mixed order models at low and high TC concentrations, indicating that the rate-limiting step is mainly associated with active binding sites adsorption. The Sip and Freundlich models showed better fitting with the equilibrium data. The TC removal by B-MgFeCa composites prepared via hydrothermal, the highest estimated uptake which is around 639.76 mg.g-1 according to the Sips model at ambient conditions, and co-pyrolysis was mainly dominated by physical and chemical interactions. The composite obtained via the co-precipitation method adsorbed TC through chemical bonding between surface functional groups with anionic species of TC molecule. The B-MgFeCa composite showed excellent reusability performance for up to five cycles with only a 30% decrease in TC removal efficiency. The results demonstrated that B-MgFeCa composites could be used as promising adsorbent materials for effective wastewater treatment.

Intensive adsorption of tetracycline by cobalt oxide quantum dots-loaded mineral carbon

Spent bleaching earth (SBE), a waste by-product produced from the bleaching step of edible oil by montmorillonite clays (bleaching earth), causes serious public health and environmental problems. Accordingly, in this study, SBE was pyrolyzed to yield mineral carbon materials (SBE@C) and cobalt oxide (Co3O4) was loaded to improve the active site of those materials. Due to the carrier function of SBE@C, ultra-fine Co3O4 quantum dots (QDs) (2-6 nm) were homogeneously and robustly immobilized onto SBE@C. The obtained adsorbent exhibited high regeneration performance and an outstanding adsorption capacity (253.36 mg/g). It can be attributed to the surface complexation of cobalt with TC being the dominant process contributing to adsorption behavior. Further, Co3O4 QDs-SBE@C still maintained adequate sorption capacity at a broad range of pH values and in the presence of co-occurring ions. These results suggested the significant application potential of SBE and demonstrated the efficiency of using Co3O4 QDs-SBE@C for wastewater remediation.

Hexamethyldisiloxane Removal from Biogas Using a Fe3O4-Urea-Modified Three-Dimensional Graphene Aerogel

Volatile methyl siloxanes (VMS), which are considered to be the most troublesome impurities in current biogas-cleaning technologies, need to be removed. In this study, we fabricated a series of Fe3O4-urea-modified reduced graphene-oxide aerogels (Fe3O4-urea-rGOAs) by using industrial-grade graphene oxide as the raw material. A fixed-bed dynamic adsorption setup was built, and the adsorption properties of the Fe3O4-urea-rGOAs for hexamethyldisiloxane (L2, as a VMS model pollutant) were studied. The properties of the as-prepared samples were investigated by employing various characterization techniques (SEM, TEM, FTIR, XRD, Raman spectroscopy, and N2 adsorption/desorption techniques). The results showed that the Fe3O4-urea-rGOA-0.4 had a high specific surface area (188 m2 g-1), large porous texture (0.77 cm3 g-1), and the theoretical maximum adsorption capacity for L2 (146.5 mg g-1). The adsorption capacity considerably increased with a decrease in the bed temperature of the adsorbents, as well as with an increase in the inlet concentration of L2. More importantly, the spent Fe3O4-urea-rGOA adsorbent could be readily regenerated and showed an excellent adsorption performance. Thus, the proposed Fe3O4-urea-rGOAs are promising adsorbents for removing the VMS in biogas.

Transport of dimethyl phthalate on loess with modified bentonite: A batch and column test investigation

Phthalic acid ester (PAE) is a toxic pollutant commonly found in high concentrations in municipal solid waste landfills. Soil-bentonite is widely used as a barrier material to control groundwater contaminants from landfill leachates. Traditional soil-bentonite materials always have a limited capacity for organic pollutant adsorption. To address this issue, the adsorption and transport behavior of dimethyl phthalate (DMP) on loess amended with two kinds of modified bentonite (HTMAC-B, modified with hexadecyltrimethylammonium chloride; CMC-B, modified with hydrophobic cationic surfactant, and carboxymethyl cellulose) were investigated. The kinetics of DMP adsorption indicates that film diffusion contributes significantly to the kinetic adsorption of DMP on HTMAC-B. The adsorption isotherm results showed that partitioning dominated DMP adsorption on loess with both modified bentonites. Owing to the in-ionic sites in HTMAC-B, which attracted hydrophobic compounds such as DMP, the adsorption capacity of 5 % HTMAC-B-amended loess (LH) was increased by a factor of 3.2. However, because CMC-B provided mostly ionic sites, 5 % CMC-B-amended loess (LC) had a little effect on DMP adsorption. The hydraulic conductivity values of LH and LC were 5.95 × 10^-10 and 1.65 × 10^-11 m/s, respectively. The X-CT result showed that there is a significant porosity change for both LH and LC. Dual-porosity model reveals that the leaching process primarily affects micro-pores, rather than larger pores in the soil matrix. The predicted retardation factors for LH and LC were 38.89 and 9.67, respectively. When using loess-bentonite as barrier material, the amendment of HTMAC-B and CMC-B can help to increase the retardation ability and reduce the permeability, respectively.

Bisphenol A adsorption and transport in loess and cationic surfactant/hydrophilic polymer modified bentonite liners

Bisphenol A (BPA) is a toxic endocrine disruptor often found in landfill leachate. Adsorption behaviors and mechanisms of BPA onto organo-bentonites amended loess, e.g., Hexadecyltrimethylammonium chloride-bentonite (HTMAC-B) and Carboxymethylcellulose-bentonite (CMC-B) were experimentally investigated. The adsorption capacity of loess amended by HTMAC-B (LHB) and CMC-B (LCB) is 4.2 and 4 times greater than that of loess (L), respectively. It is attributed to the increase of hydrogen bonds and hydrophobic lateral interactions between the adsorbent and the adsorbate. The binary (Pb²⁺-BPA) systems may enhance BPA adsorption onto the samples by the formation of coordination bonds between the hydroxyl group of BPA and Pb²⁺ ions. A cycled column test was used for investigating the transport behavior of BPA in LHB and LCB samples. The hydraulic conductivity of loess amended by the organo-bentonite (e.g., HTMAC-B, CMC-B) is generally lower than 1 × 10^-9 m/s. Especially for CMC-B amended loess, the hydraulic conductivity can be reduced to 1 × 10^-12 m/s. This guarantees the hydraulic performance of the liner system. Transport behavior of BPA in cycled column test is explained by the mobile-immobile model (MIM). Modelling results showed that loess amended by organo-bentonites can increase the breakthrough time of BPA. In comparison to loess-based liner, the breakthrough time of BPA for LHB and LCB can be increased by a factor of 10.4 and 7.5, respectively. These results indicate that organo-bentonites can serve as a potentially effective amendment for improving the adsorption of loess-based liners.

Preparation of Chitosan-Modified Bentonite and Its Adsorption Performance on Tetracycline

In this study, chitosan-modified bentonite was synthesized using the coprecipitation method. When the Na₂CO₃ content was 4% (weight of soil) and the mass ratio of chitosan to bentonite was 1:5, the adsorption performance of the chitosan/bentonite composite was best. The adsorbent was characterized by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller measurement. Various characterization results demonstrate that chitosan successfully entered the bentonite interlayer and increased layer spacing but did not modify bentonite's laminar mesoporous structure, and the -CH₃ and -CH₂ groups of chitosan appeared on chitosan-modified bentonite. Tetracycline was used as the target pollutant in the static adsorption experiment. The adsorption capacity was 19.32 mg/g under optimal conditions. The adsorption process was more consistent with the Freundlich model and the pseudo-second-order kinetic model, indicating that it was a nonmonolayer chemisorption process. The adsorption process is a spontaneous, endothermic, entropy-increasing process, according to thermodynamic characteristics.

Non-toxic and biodegradable κ-carrageenan/ZnO hydrogel for adsorptive removal of norfloxacin: Optimization using response surface methodology

Antibiotic resistance is increasing globally due to increased prescription and easy dispensing of antibiotic drugs universally. Hence, to mitigate this effect, efficient, biodegradable, and non-toxic adsorbents are required to be developed. Carrageenan (CG), a natural polymer, having multiple functional groups, provides a backbone for crosslinking with borax and incorporation of ZnO nanoparticles that formed borax-cross-linked κ-carrageenan (CG/Bx/ZnO) hydrogel which is used for efficient adsorption of norfloxacin from water. Surface morphology of as-synthesized hydrogel revealed the rough surface, which was determined by FESEM. Surface area of CG/Bx/ZnO hydrogel was found to be 22.90 m²/g with 3.41 nm pore radius. Systematic batch adsorption studies revealed that 99.4 % removal efficiency could be achieved at a dosage level of 20 mg/L of norfloxacin with 10 mg of hydrogel at pH of 4 in 8 h at room temperature. Experimentally optimized key parameters affecting the overall efficiency of adsorption matched well with the results assessed from ANOVA using Box-Behnken composite design model. The adsorption process was well fitted with the pseudo-second-order model and Langmuir isotherm with 1282.05 mg/g adsorption capacity. Thermodynamic study results show that adsorption is spontaneous and endothermic. The CG/Bx/ZnO hydrogel demonstrated excellent repeatability with minimal loss in norfloxacin adsorption for seven cycles.

Adsorption and Desorption Study of Reusable Magnetic Iron Oxide Nanoparticles Modified with Justicia adhatoda Leaf Extract for the Removal of Textile Dye and Antibiotic

The release of tetracycline hydrochloride (TCH) and methylene blue (MB) dye into the aquatic system uncontrollably caused major environmental and health problems; hence, their prevention required serious attention. Adsorption process is now being researched in order to increase adsorption efficiency and reprocess to alleviate environmental issues. The use of magnetic nanoparticle as an adsorbent for wastewater treatment has a lot of prospective. A magnetic iron oxide nanoparticle surface modified by Vasaka (Justicia adhatoda) leaf extract (JA-MIONs) is used to give a fast removal approach for MB dye and TCH antibiotics. Dynamic light scattering, UV-Vis and band gap measurement, powder X-ray diffraction, Fourier-transform infrared spectroscopy, and transmission electron microscopy were operated to analyse the formation and size of these magnetic nanoparticles. The impacts of different factors such as contact time (30-150 min), adsorbate concentration (10-50 mg/L), pH (4-10), and adsorbent dose (2-10 mg) were explored. Adsorption kinetics and isotherms show that it follows the pseudo-first-order kinetic and the Freundlich isotherm, with maximum adsorption capacities of 76.92 mg/g for MB and 200 mg/g for TCH at 298 K. The reusability of the JA-MIONs eventually exhibited a decline in the adsorption percentage of MB and TCH after five and four times respectively. After the desorption-adsorption cycles, this adsorbent continued to exhibit significant adsorption capacity. This investigation furnished the significant reference data for the synthesis of JA-MIONs as a novel and auspicious adsorbent for the industrial clean-up of toxic dyes and heavily used antibiotics from water.

Preparation and characterization of chitosan-curdlan composite magnetized by zinc ferrite for efficient adsorption of tetracycline antibiotics in water

Tetracycline (TC) antibiotic-related water pollution directly threatens human health and ecosystems. Here, a zinc ferrite/chitosan-curdlan (ZNF/CHT-CRD) magnetic composite was prepared via a co-precipitation method to be used as a novel, green adsorbent for TC removal from water. Benefiting from a multitude of functional groups, CRD was first crosslinked with CHT and then magnetized with ZNF to provide an easy separation from the solution with an external magnetic force. The successful synthesis and magnetization of the composite were verified with different characterization techniques. The effect of solution pH and composite dosage was carefully evaluated. The optimum solution pH and composite dosage were 6 and 0.65 g/L, respectively, with complete TC removal. The adsorption process by the magnetic composite followed the pseudo-first-order kinetics and Langmuir isotherm models. The maximum adsorption capacity determined from the Langmuir model was 371.42 mg/g at 328 K. Thermodynamic parameters indicated endothermic and spontaneous adsorption. Meanwhile, the composite could be readily separated from the aqueous solution thanks to its magnetic property. Then, it was regenerated with acetone and ethanol to be reused for five more successive cycles. Interestingly, the prepared adsorbent was highly stable and performant in removing TC, maintaining approximately 90 % of its first-cycle adsorption capacity. The adsorption mechanism was primarily attributed to electrostatic and hydrogen bonding attractions. Overall, the currently developed adsorbent could be a more favorable, efficient, and cost-effective candidate than other magnetic chitosan-based composites. These features make it applicable for treating water contaminated with various pharmaceutical pollutants with high separation efficiency and easy recovery under successive adsorption-desorption cycles.

Nitrogen-doped magnetic porous carbon material from low-cost anion-exchange resin as an efficient adsorbent for tetracyclines in water

In this work, nitrogen-doped magnetic porous carbon material (N-MPC) was prepared through the high-temperature calcination of low-cost [Fe(CN)₆]^3--loaded anion-exchange resin, which was experimentally demonstrated to have significant adsorption performance for tetracycline (TC) in water. The N-MPC adsorbent with a large specific surface area (781.1 m² g^-1) was able to maintain excellent performance in a wide pH range from 4 to 10 or in high ionic strength solution. The adsorption of TC on N-MPC was found to be more consistent with the pseudo-second-order model and Langmuir adsorption model, and the maximum adsorption capacity (q_{m, cal}) was calculated to be 603.4 mg g^-1. As a recoverable magnetic adsorbent, the N-MPC remained a TC removal rate higher than 70% after four adsorption cycles. The adsorption mechanism was speculated on the basis of characterizations, where pore filling, hydrogen bonding interaction, and π-π electron donor-acceptor (EDA) interaction were crucial adsorption mechanisms. A variety of antibiotics were selected for adsorption, and excellent performance was found especially for TCs, indicating that the N-MPC can be used for the efficient removal of TCs from water.

Enhanced Visible-Light-Responsive Photocatalytic Degradation of Ciprofloxacin by the CuxO/Metal-Organic Framework Hybrid Nanocomposite

Ciprofloxacin (CIP) is a commonly used antibiotic, however, once in the environment, it is highly toxic with a poor biodegradability. Given these attributes, an effective strategy for the removal of CIP is urgently needed for the protection of water resources. Herein, a novel copper metal-organic framework (CuxO/MOF) multifunctional material has been produced, in this work, by the calcination of Cu-MOF urea at 300 °C, in the presence of a 5% H2 atmosphere. The morphological, structural, and thermal properties of the prepared CuxO/MOF were determined through various techniques, and its photocatalytic behavior was investigated for the degradation of CIP under visible-light irradiation. The prepared CuxO/MOF bifunctional material is presented as a graphitic carbon-layered structure with a particle size of 9.2 ± 2.1 nm. The existence of CuO-Cu2O-C, which was found on the CuxO/MOF surface, enhanced the adsorption efficiency and increased the photosensitivity of CuxO/MOF, towards the degradation of CIP in aqueous solutions. The tailored CuxO/MOF, not only shows an excellent CIP degradation efficiency of up to 92% with a constant kinetic rate (kobs) of 0.048 min−1 under visible light, but it can also retain the stable photodegradation efficiency of >85%, for at least six cycles. In addition, CuxO/MOF has an excellent adsorption capacity at pH 6.0 of the maximum Langmuir adsorption capacity of 34.5 mg g−1 for CIP. The results obtained in this study demonstrate that CuxO/MOF is a reliable integrated material and serves as an adsorbent and photocatalyst, which can open a new pathway for the preparation of visible-light-responsive photocatalysts, for the removal of antibiotics and other emerging pollutants.

Sweep-Out of Tigecycline, Chlortetracycline, Oxytetracycline, and Doxycycline from Water by Carbon Nanoparticles Derived from Tissue Waste

Pharmaceutical pollution has pervaded many water resources all over the globe. The propagation of this health threat drew the researchers' concern in seeking an efficient solution. This study introduced toilet paper waste as a precursor for carbon nanoparticles (CRNPs). The TEM results showed a particle size range of 30.2 nm to 48.1 nm, the BET surface area was 283 m² g^-1, and the XRD pattern indicated cubical-graphite crystals. The synthesized CRNPs were tested for removing tigecycline (TGCN), chlortetracycline (CTCN), oxytetracycline (OTCN), and doxycycline (DXCN) via the batch process. The adsorption equilibrium time for TGCN, DXCN, CTCN, and OTCN was 60 min, and the concentration influence revealed an adsorption capacity of 172.5, 200.1, 202.4, and 200.0 mg g^-1, respectively. The sorption of the four drugs followed the PSFO, and the LFDM models indicated their high sorption affinity to the CRNPs. The adsorption of the four drugs fitted the multilayer FIM that supported the high-affinity claim. The removals of the four drugs were exothermic and spontaneous physisorption. The fabricated CRNPs possessed an excellent remediation efficiency for contaminated SW and GW; therefore, CRNPs are suggested for water remediation as low-cost sorbent.

Study on removal of copper ions from aqueous phase by modified sepiolite flocs method

With the improvement of environmental protection and standards, the recovery and recycling of copper ions released from industrial wastewater discharge has aroused sufficient research interest. A new adsorbent (ABsep) derived from natural sepiolite (Sep) by modification technology of hexadecyltrimethoxysilane (HDTMS) or tetraethylorthosilicate (TEOS) and flocs separation method for adsorption of Cu²⁺ in wastewater have been investigated in this paper. The changes of crystal structure and physicochemical properties of Sep during modification process showed that HDTMS and TEOS were loaded onto the Sep surface without inserting into the Sep interlayer structure. The adsorption experimental results presented a smaller amount of ABsep (1 g/L) achieved 97.5% removal of 50 mg/L Cu²⁺ at pH 6 and temperature of 298 K within a shorter contact time (50 min). It is interesting the adsorption process of Cu²⁺ on ABsep was spontaneous and exothermic, with physical adsorption dominating, as result of combination of physical adsorption, electrostatic gravitational force, and chemical reaction. Because of good physical-chemical adsorption performance of ABsep surface to Cu²⁺, high removal rates of Cu²⁺ from aqueous phase could be achieved after three adsorption regeneration cycles, this indicated the ABsep was expected to be a promising adsorbent of Cu²⁺ removal for wastewater treatment.

Highly Efficient Degradation of Tetracycline Hydrochloride in Water by Oxygenation of Carboxymethyl Cellulose-Stabilized FeS Nanofluids

The transformation of organic pollutants by stabilized nano-FeS in oxic conditions is far less understood than in anoxic states. Herein, carboxymethyl cellulose-stabilized FeS (CMC-FeS) nanofluids are prepared at a CMC-to-FeS mass ratio of 1/2 and their performance of tetracycline hydrochloride (TC) degradation under oxic conditions was investigated. Here, we showed that TC could be efficiently removed by oxygenation of CMC-FeS nanofluids at neutral initial pH. We found that CMC-FeS dosages as low as 15 mg/L can achieve the TC removal efficiency as high as 99.1% at an initial TC concentration of 50 mg/L. Oxidative degradation plays a predominated role in TC removal (accounting for 58.0%), adsorption has the second importance (accounting for 37.0%), and reduction has minor impact (accounting for 4.1%) toward TC removal. Electron spin resonance assays, fluorescent detection using coumarin as a probe, and radical scavenging experiments confirm that hydroxy radicals (•OH), both in free and surface-bound forms, contribute to oxidation of TC. Humic acids brought detrimental effects on TC removal and therefore should be biologically degraded in advance. This work offers a facile and cost-effective solution to decontaminate TC in natural and engineered water bodies.

Tetracycline removal enhancement with Fe-saturated nanoporous montmorillonite in a tripartite adsorption/desorption/photo-Fenton degradation process

The adsorption and photo-Fenton degradation of tetracycline (TC) over Fe-saturated nanoporous montmorillonite was analyzed. The synthesized samples were characterized using XRD, FTIR, SEM, and XRF analysis, and the adsorption and desorption of TC onto these samples, as well as the antimicrobial activity of TC during these processes, were analyzed at different pH. Initially, a set of adsorption/desorption experiments was conducted, and surprisingly, up to 50% of TC adsorbed was released from Mt structure. Moreover, the desorbed TC had strong antibacterial activity. Then, an acid treatment (for the creation of nanoporous layers) and Fe saturation of the montmorillonite were applied to improve its adsorption and photocatalytic degradation properties over TC. Surprisingly, the desorption of TC from modified montmorillonite was still high up to 40% of adsorbed TC. However, simultaneous adsorption and photodegradation of TC were detected and almost no antimicrobial activity was detected after 180 min of visible light irradiation, which could be due to the photo-Fenton degradation of TC on the modified montmorillonite surface. In the porous structures of modified montmorillonite high, ˙OH radicals were created in the photo-Fenton reaction and were measured using the Coumarin technique. The ˙OH radicals help the degradation of TC as proposed in an oxidation process. Surprisingly, more than 90% of antimicrobial activity of the TC decreased under visible light (after 180 min) when desorbed from nanoporous Fe-saturated montmorillonite compared to natural montmorillonite. To the best of our knowledge, this is the first time that such a high TC desorption rate from an adsorbent with the least residual antimicrobial activity is reported which makes nanoporous Fe-saturated montmorillonite a perfect separation substance of TC from the environment.

Efficient Removal of Siloxane from Biogas by Using β-Cyclodextrin-Modified Reduced Graphene Oxide Aerogels

In this study, β-cyclodextrin-modified reduced graphene oxide aerogels (β-CD-rGOAs) were synthesized via a one-step hydrothermal method and were used to remove hexamethyldisiloxane (L2) from biogas. The β-CD-rGOAs were characterized by the Brunner–Emmet–Teller technique, using Fourier-transform infrared spectroscopy, Raman spectrometry, scanning electron microscopy (SEM), contact angle measurements, and X-ray diffraction. The results of the characterizations indicate that β-CD was grafted onto the surface of rGOAs as a cross-linking modifier. The β-CD-rGOA had a three-dimensional, cross-linked porous structure. The maximum breakthrough adsorption capacity of L2 on β-CD-rGOA at 273 K was 111.8 mg g⁻¹. A low inlet concentration and bed temperature facilitated the adsorption of L2. Moreover, the β-CD-rGOA was regenerated by annealing at 80 °C, which renders this a promising material for removing L2 from biogas.

Porous multifunctional phenylcarbamoylated-β-cyclodextrin polymers for rapid removal of aromatic organic pollutants

In this work, polymers containing a large number of benzene rings and multiple functional groups were designed to remove aromatic organic pollutants. Using tetrafluoroterephthalonitrile (TFTPN) as a rigid crosslinking agent to crosslink different functionalized phenylcarbamoylated-β-cyclodextrin derivatives to prepare a series of porous multifunctional cyclodextrin (CD) polymerizations, including three preliminary polymerized adsorption materials and a mix β-cyclodextrin polymer (X-CDP) prepared via a secondary crosslinking procedure of the above three materials. The X-CDP preparation process connects the pre-formed nanoparticles and increases the presence of linkers inside the particles. At the same time, X-CDP exhibited porous structure with various functional groups such as nitro, chlorine, fluorine, and hydroxyl. Those special characteristics render this material with good adsorption ability towards various aromatic organic pollutants in water, including tetracycline, ibuprofen, dichlorophenol, norfloxacin, bisphenol A, and naphthol. Especially, the maximum adsorption capacity for tetracycline at equilibrium reached 110.56 mg·g^-1, which is competitive with the adsorption capacities of other polysaccharide adsorbents. X-CDP removed organic contaminants much more quickly than other adsorbents, reaching almost ~95% of its equilibrium in only 30 s, and the rate constant reaches 2.32 g·mg^-1·min^-1. The main adsorption process of the pollutants by X-CDP fitted the pseudo-second-order kinetic and Langmuir isotherm well, indicating that the adsorption process is monolayer adsorption. Moreover, X-CDP possessed the good reusability where the pollutant removal rate was only reduced 8.3% after five cycles. Such advantages render the polymer great potential in the rapid treatment of organic pollutants in water bodies.

Effects of environmental aging on the adsorption behavior of antibiotics from aqueous solutions in microplastic-graphene coexisting systems

The extensive use of nanofillers, such as graphene oxide (GO) and reduced graphene oxide (rGO), as plastic additives has led to the coexistence of microplastics (MPs) and nanomaterials in aquatic environments. However, there is a lack of studies on the adsorption behavior of MPs when coexisting with GO. Moreover, MPs and GO are prone to undergoing aging processes in real environments under conditions such as sunlight exposure, which changes their physicochemical properties and affects their adsorption behavior. In this study, the aging processes of MPs and GO in a real environment were simulated by ultraviolet (UV) irradiation and thermal treatments, respectively. The adsorption behavior of ciprofloxacin (CIP) on three types of MPs (polypropylene (PP), polyamide (PA), and polystyrene (PS)) before and after aging was explored. The MPs are ordered in terms of CIP adsorption capacity as aged-PA > aged-PS > aged-PP > PA > PP > PS, and the adsorption capacity of aged MPs was approximately twofold higher than that of pristine MPs. This paper also studied the adsorption performance of antibiotics in a coexisting system of aged MPs and GO/rGO, and the tetracycline (TC) adsorption capacity was increased by ~336% in aged PP-GO and ~100% in an aged PP-rGO coexisting system. GO/rGO with high degree of oxidation and concentration in an aged- PP-GO/rGO coexisting system are more conducive to the TC adsorption, due to the contribution of oxygen-containing functional groups. Surface and partition adsorption co-occurred during the TC adsorption process. The TC adsorption behavior in the MPs-GO/rGO coexisting system was strongly dependent on the solution pH, which was more favorable under acidic (pH = 3) or alkaline (pH = 11) conditions. This study improves the understanding of the environmental behavior of MPs, graphene, and antibiotics and guides research on strategies for preventing the migration of antibiotics in MPs-GO/rGO coexisting systems.