Highly efficient degradation of sulfamethoxazole (SMX) by activating peroxymonosulfate (PMS) with CoFe2O4 in a wide pH range

Magnetic CoFe hydrotalcite composite Co metal-organic framework material efficiently activating peroxymonosulfate to degrade sulfamethoxazole: Oxygen vacancy-mediated radical and non-radical pathways

Herein, a novel rich oxygen vacancy (Ov) cobalt-iron hydrotalcite composite cobalt metal-organic framework material (ZIF-67/CoFe-LDH) was prepared by simple urea water and heat reduction approach and utilized for the peroxymonosulfate (PMS) system to remove sulfamethoxazole (SMX). 95 ± 1.32 % SMX (20 mg/L) was able to degraded in 20 min with TOC removal of 53 ± 1.56 % in ZIF-67/CoFe-LDH/PMS system. The system maintained a fantastic catalytic capability with wide pH range (3-9) and common interfering substances (Cl-, NO3-, CO32-, PO42- and humic acid (HA)), and the degradation efficiency could even remain 80.2 ± 1.48 % at the fifth cycle. Meanwhile, the applicability and feasibility of the catalysts for practical water treatment was verified by the degradation effects of SMX in different water environments and several other typical pollutants. Co and Fe bimetallic active centers synergistically activate PMS, and density functional theory (DFT) predicted adsorption energy about Ov in ZIF-67/CoFe-LDH for PMS was 1.335 eV, and OO bond length of PMS was stretched to 1.826 Å. As a result, PMS was more easily activated and broken, which accelerated the singlet oxygen (1O2), sulfate radical (SO4•-), high-valent metals and other reactive oxygen species (ROS). Radical and non-radical jointly degrading the pollutants improved the catalytic effect. Finally, SMX degradation intermediates were analyzed to explain the degradation pathway and their biotoxicity was also evaluated. This paper provides a new research perspective of oxygen vacancy activating PMS to degrade pollutants.

In situ activation of peroxymonosulfate with bioelectricity for sulfamethoxazole sustainable removal

Conventional electrochemical activation of peroxymonosulfate (PMS) is not very cost-effective and practical by the excessive input of energy. The electricity generated by photosynthetic microalgae fuel cells (MFCs) is utilized to activate PMS, which would achieve the combination of green bioelectricity and advanced oxidation processes for sustainable pollutants degradation. In this study, a novel dual-chamber of MFCs was constructed by using microalgae as anode electron donor and PMS as cathode electron acceptor, which was operating under both close-circuit and open-circuit conditions. Under close-circuit condition, 1-12 mM PMS in cathode was successfully in situ activated, where 32.00%-99.83% of SMX was removed within 24 h, which was about 1.21-1.78 times of that in the open-circuit of MFCs. Meanwhile, a significant increase in bioelectricity generation in MFCs was observed after the accumulation of microalgae biomass (4.65-5.37 mg/L), which was attributed to the efficient electron separation and transfer. Furthermore, the electrochemical analysis demonstrated that SMX or its products were functioned as electronic shuttles, facilitating the electrochemical reaction and altering the electrical capacitance. The quenching experiments and voltage output results reflected that complex active radical (SO4⋅-, ⋅OH, and 1O2) were involved in SMX removal. Seven degradation products of SMX were detected and S-N bond cleavage was the main degradation pathway. Predicted toxicity values calculated by ECOSAR program showed that all the products were less toxic or nontoxic. Finally, the density functional theory (DFT) calculations revealed that the O and N atoms on SMX were more susceptible to electrophilic reactions, which were more vulnerable to be attacked by reactive species. This study provided new insights into the activation of PMS by bioelectricity for SMX degradation, proposing the mechanisms for PMS activation and degradation sites of SMX.

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

Conjugated Microporous Polymers-Based Catalytic Membranes with Hierarchical Channels for High-Throughput Removal of Micropollutants

Engineering a catalytic membrane capable of efficiently removing emerging organic microcontaminants under ultrahigh flux conditions is of significance for water purification. Herein, drawing inspiration from the functional attributes of lymphatic vessels involved in immunosurveillance and fluid transport with minimal energy consumption, a novel hierarchical porous catalytic membrane is engineered. This membrane, based on an innovative nitrogen-rich conjugated microporous polymer (polytripheneamine, PTPA), is synthesized using an electrospinning coupled in situ polymerization approach. The resulting bioinspired membrane with hierarchical channels comprises a thin layer (≈1.7 µm) of crosslinked PTPA nanoparticles covering the interconnected electrospun nanofibers. This unique design creates an intrinsic microporous angstrom-confined system capable of activating peroxymonosulfate (PMS) to generate 98.7% singlet oxygen (1O2), enabling durable and highly efficient degradation of microcontaminants. Additionally, the presence of a thin layer of mesoporous structure between PTPA nanoparticles and macroporous channels within the interwoven nanofibers enhances mass transfer efficiency and facilitates high flux rates. Notably, the prepared hierarchical porous organic catalytic membrane demonstrates enduring high-efficiency degradation performance with a superior permeance (>95% and >2500 L m-2 h-1 bar-1) sustained over 100 h. This work introduces an innovative pathway for the design of high-performance catalytic membranes for the removal of emerging organic microcontaminants.

Multi-level FeCo/N-doped carbon nanosheet for peroxymonosulfate oxidation and sterilization inactivation

Magnetic carbon-based catalysts with environmental friendliness have exhibited prominent effects on advanced oxidation processes. Herein, a multi-level FeCo/N-doped carbon nanosheet (FeCo/CNS) was synthesized by facile impregnation iron-cobalt salt onto cotton and followed by confined pyrolysis. We identified excellent advantages of the modified FeCo/CNS materials: (i) The convenience of the synthesis method and (ii) The dual effect of sterilization and contaminant degradation achieved through the FeCo/CNS-activated Peroxymonosulfate (PMS). The comparative experimental showed that FeCo/CNS could provide favorable catalytic performance, completely removing bisphenol A (BPA) and tetracycline (TC) within 5 min. Moreover, the potent sterilization properties against Staphylococcus aureus and Escherichia coli were also verified. Analysis of the degradation pathway confirmed the existence of intermediates, and toxicological research demonstrated that the toxicity of the degradation intermediates of BPA gradually decreased over time. Our research provided an excellent application of FeCo/CNS in PMS oxidation and sterilization inactivation.

Peroxymonosulfate activation by nanocomposites towards the removal of sulfamethoxazole: Performance and mechanism

Heterogeneous activation of peroxomonosulfate (PMS) has been extensively studied for the degradation of antibiotics. The cobalt ferrite spinel exhibits good activity in the PMS activation, but suffers from the disadvantage of low PMS utilization efficiency. Herein, the nanocomposites including FeS, CoS2, CoFe2O4 and Fe2O3 were synthesized by hydrothermal method and used for the first time to activate PMS for the removal of sulfamethoxazole (SMX). The nanocomposites showed superior catalytic activity in which the SMX could be completely removed at 40 min, 0.1 g L-1 nanocomposites and 0.4 mM PMS with the first order kinetic constant of 0.2739 min-1. The PMS utilization efficiency was increased by 29.4% compared to CoFe2O4. Both radicals and non-radicals contributed to the SMX degradation in which high-valent metal oxo dominated. The mechanism analysis indicated that sulfur modification, on one hand, enhanced the adsorption of nanocomposites for PMS, and promoted the redox cycles of Fe2+/Fe3+ and Co2+/Co3+ on the other hand. This study provides new way to enhance the catalytic activity and PMS utilization efficiency of spinel cobalt ferrite.

CoFe2O4 as a source of Co(II) ions for imidacloprid insecticide oxidation using peroxymonosulfate: Influence of process parameters and surface changes

Nanometric cobalt magnetic ferrite (CoFe2O4) synthesized by distinct methods was used for in situ chemical activation of peroxymonosulfate (PMS) under neutral conditions to oxidize imidacloprid (IMD) insecticide. The effect of CoFe2O4 load (0.125-1.0 g L-1) and PMS concentration (250-1000 μM) was investigated as well as the influence of phosphate buffer and Co(II) ions. PMS activation by Co(II) ions, including those leached from CoFe2O4 (>50 μg L-1), exhibited a strong influence on IMD oxidation and, apparently, without substantial contributions from the solid phase. Within the prepared solid materials (i.e., using sol-gel and co-precipitation methods), high oxidation rates (ca. 0.5 min-1) of IMD were attained in ultrapure water. Phosphate buffer had no significant influence on the IMD oxidation rate and level, however, its use and solution pH have shown to be important parameters, since higher PMS consumption was observed in the presence of buffered solutions at pH 7. IMD byproducts resulting from hydroxylation reactions and rupture of the imidazolidine ring were detected by mass spectrometry. At optimum conditions (0.125 g L-1 of CoFe2O4 and 500 μM of PMS), the CoFe2O4 nanoparticles exhibited an increase in the charge transfer resistance and an enhancement in the surface hydroxylation after PMS activation, which led to radical (HO● and SO4●-) and nonradical (1O2) species. The latter specie led to high levels of IMD oxidation, even in a complex water matrix, such as simulated municipal wastewater at the expense of one-order decrease in the IMD oxidation rate.

Insights into the mechanism of multiple Cu-doped CoFe2O4 nanocatalyst activated peroxymonosulfate for efficient degradation of Rhodamine B

The multiple metal catalyst as a promising nanomaterial has shown excellent activity in the peroxymonosulfate (PMS) activation for pollutant degradation. However, the role of special sites and in-depth understanding of the PMS activation mechanism are not fully studied. In this study, a Cu-doped CoFe2O4 nanocatalyst (0.5CCF) was synthesized by a sol-gel and calcination method, and used for PMS activation to remove Rhodamine B (RhB). The results showed that the Cu doping obviously enhanced the catalytic performance of CoFe2O4, with 99.70% of RhB removed by 0.5CCF while 74.91% in the CoFe2O4 within 15 min. Based on the X-ray photoelectron spectroscopy and electrochemical analysis, this could be ascribed to the more low valence of Co and Fe species generated on the 0.5CCF and faster electron transfers occurred in the 0.5CCF due to the Cu doping. In addition, Cu doping could provide more reaction sites for the 0.5CCF to activate PMS for RhB removal. The metal species and the surface hydroxyl were the reaction sites of PMS activation, and the surface hydroxyl played an important role in surface-bound reactive species generation. During the PMS activation, the Cu not only activated PMS to produce reactive oxygen species (ROS), but also regenerated Co2+ and Fe2+ to accelerate the PMS activation. The non-radical of 1O2 was the main ROS with a 99.35% of contribution rate, and the SO5•- self-reaction was its major source. This study provides a new insight to enhance the PMS activation performance of multiple metal catalysts by Cu doping in wastewater treatment.

Cellulose beads supported CoFe2O4: A novel heterogeneous catalyst for efficient rhodamine B degradation via advanced oxidation processes

In this study, a novel mechanical process was used to produce cellulose beads (CB). These beads were then doped with cobalt ferrite nanoparticles (CoFe2O4 NPs) to serve as catalysts for the degradation of rhodamine B (RhB) through peroxymonosulfate (PMS) activation. The physical and chemical properties of CoFe2O4 and CoFe2O4@CB catalysts were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) combined with energy dispersive X-ray spectrometer (EDX), scanning transmission electron microscopy (STEM) techniques, and thermogravimetric analysis (TGA). To optimize RhB degradation efficiency, Response Surface Methodology (RSM) was employed, utilizing the Box-Behnken design (BBD). Under the optimized conditions of a catalyst dosage of 0.40 g/L, PMS dosage of 0.98 mM, RhB concentration of 40 mg/L, pH of 5.27, and reaction time of 60 min, a remarkable degradation efficiency of 98.51 % was achieved at a temperature of 25 °C. In quenching experiments, 1O2, SO4•-, and HO• species are produced in the CoFe2O4@CB/PMS system, with 1O2, and SO4•- species dominating RhB degradation. Remarkably, the new CoFe2O4@CB catalyst has demonstrated exceptional stability and reusability, validated by recycling tests (up to 78 % of RhB degradation efficiency after a 5-cycle experiment) and subsequent characterizations (FTIR, SEM, and EDX) emphasizing unchanged bands, uniform distribution, and consistent composition after reuse cycles. These results demonstrate the effectiveness of mechanically produced CoFe2O4@CB catalysts for advanced oxidation processes (AOPs), with promising applications in wastewater treatment.

Carbon nanotube supported cobalt nickel sulphide nano-catalyst for degradation of chloroquine phosphate with peroxymonosulphate

Carbon nanotubes supported cobalt nickel sulphide nanoparticles (nano-NiCo2S4@CNTs) were successfully prepared by a hydrothermal method as heterogeneous catalyst which can be used as an activator of peroxymonosulphate (PMS) for the degradation of chloroquine phosphate (CQP). Based on characterisation techniques, the prepared catalyst has excellent surface properties and structural stability. When different concentrations of CQP were treated with 0.2 g/L nano-NiCo2S4@CNTs and 1.0 mM PMS, the highest degradation rate could reach 99.86% after 30 min. Under the interference of pH, common anions and humic acid in the water environment, the reaction system can still achieve high degradation efficiency, showing excellent anti-interference ability and practical applicability. Furthermore, in the nano-NiCo2S4@CNTs/PMS system, according to the identification results of reactive oxygen species, the free radical and non-free radical pathway are responsible for the degradation of CQP, and the PMS mechanism activation was comprehensively proposed. Twelve intermediate products were detected in the degradation process, and the possible degradation pathways of CQP were proposed. This toxicity analysis demonstrates that the intermediate products formed during CQP degradation pose lower environmental risks compared to the original pollutant. In addition, after using the catalyst four cycles, the removal efficiency of CQP remains above 80%, indicating the excellent reusability and low metal ion leaching characteristics. Therefore, the nano-NiCo2S4@CNTs synthesised in this research has broad application prospects in activating PMS for wastewater treatment.

Efficient Degradation of Sulfamethoxazole by Diatomite-Supported Hydroxyl-Modified UIO-66 Photocatalyst after Calcination

Sulfamethoxazole (SMX) is a widely used antibiotic to treat bacterial infections prevalent among humans and animals. SMX undergoes several transformation pathways in living organisms and external environments. Therefore, the development of efficient remediation methods for treating SMX and its metabolites is needed. We fabricated a photo-Fenton catalyst using an UIO-66 (Zr) metal-organic framework (MOF) dispersed in diatomite by a single-step solvothermal method for hydroxylation (HO-UIO-66). The HO-UIO-66-0/DE-assisted Fenton-like process degraded SMX with 94.7% efficiency; however, HO-UIO-66 (Zr) is not stable. We improved the stability of the catalyst by introducing a calcination step. The calcination temperature is critical to improving the catalytic efficiency of the composite (for example, designated as HO-UIO-66/DE-300 to denote hydroxylated UIO-66 dispersed in diatomite calcined at 300 °C). The degradation of SMX by HO-UIO-66/DE-300 was 93.8% in 120 min with 4 mmol/L H2O2 at pH 3 under visible light radiation. The O1s XPS signatures signify the stability of the catalyst after repeated use for SMX degradation. The electron spin resonance spectral data suggest the role of h+, •OH, •O2-, and 1O2 in SMX degradation routes. The HO-UIO-66/DE-300-assisted Fenton-like process shows potential in degrading pharmaceutical products present in water and wastewater.

Facile synthesis of NaA zeolite supported Co2Fe1 for highly efficient degradation of Acid Orange 7 by activation of peroxymonosulfate

The development of heterogeneous Co-based catalysts with an effective combination mode of Co/Fe and supporter, a facile synthetic method, and a low treatment cost is an important environment challenge for azo dyes degradation by peroxymonosulfate (PMS) activation. In this study, NaA zeolite supported CoxFey with various molar ratio of Fe/Si and Co/Fe was synthesized by a facile hydrothermal process, and used to activate PMS for Acid Orange 7 (AO7) degradation. NaA zeolite supported Co2Fe1 with the Fe/Si molar ratio of 1:10 showed superior catalytic performance compared with other NaA zeolite supported CoxFey. In a system containing 0.6 g/L catalysts, 4 mM PMS, pH 5 and T = 30℃, 95.8% AO7 and 79.1% COD conversion could be achieved at 20 and 60 min, respectively, and the first order kinetic rate constant reached 0.14795 min-1. Moreover, NaA zeolite supported Co2Fe1/PMS system exhibited excellent catalytic effect in a wide pH range of 3-9. Temperature had an obvious effect on AO7 degradation, and the activation energy was 31.36 kJ/mol. HCO3- demonstrated an obvious depression on AO7 degradation, while Cl-, SO42- and H2PO4- had a relatively poor impact. Quenching experiments showed that both sulfate radicals ([Formula: see text]) and hydroxyl radicals (·OH) were generated in the PMS reaction system, and the [Formula: see text] was the dominant active radical. During 3 cycles experiments, an acceptable AO7 conversion ratio (91.8%) within 30 min arrived, suggesting the good stability of NaA zeolite supported Co2Fe1.

Peroxymonosulfate-Activation-Induced Phase Transition of Mn3O4 Nanospheres on Nickel Foam with Enhanced Catalytic Performance

The transformations of physicochemical properties on manganese oxides during peroxymonosulfate (PMS) activation are vital factors to be concerned. In this work, Mn₃O₄ nanospheres homogeneously loaded on nickel foam are prepared, and the catalytic performance for PMS activation is evaluated by degrading a target pollutant, Acid Orange 7, in aqueous solution. The factors including catalyst loading, nickel foam substrate, and degradation conditions have been investigated. Additionally, the transformations of crystal structure, surface chemistry, and morphology on the catalyst have been explored. The results show that sufficient catalyst loading and the support of nickel foam play significant roles in the catalytic reactivity. A phase transition from spinel Mn₃O₄ to layered birnessite, accompanied by a morphological change from nanospheres to laminae, is clarified during the PMS activation. The electrochemical analysis reveals that more favorable electronic transfer and ionic diffusion occur after the phase transition so as to enhance catalytic performance. The generated SO₄^•- and •OH radicals through redox reactions of Mn are demonstrated to account for the pollutant degradation. This work will provide new understandings of PMS activation by manganese oxides with high catalytic activity and reusability.

Immobilization CoOOH nanosheets on biochar for peroxymonosulfate activation: Built-in electric field mediated radical and non-radical pathways

The strong electron interaction between metal oxide-carbon-based catalyst components plays a vital role in the peroxymonosulfate (PMS) activation for pollutant degradation. Herein, a novel CoOOH nanosheets anchored on rape straw-derived biochar (BC) surface (labeled as CoOOH/BC) as an efficient PMS activator toward degrading sulfamethoxazole (SMX) was synthesized. Experimental results indicated that integrating CoOOH nanosheets on the BC surface could inhibit CoOOH aggregation to increase the specific surface areas, exert a component synergistic effect to enhance activation degradation activity, and improve the catalyst stability. As a result, a 96 % degradation efficiency of SMX was achieved within 20 min over 20 wt% CoOOH/BC composite catalyst under the optimal conditions. Density functional theory (DFT) calculations disclosed that a built-in electric field (BIEF) pointing from BC to CoOOH was constructed at their interface, which could mediate PMS activation for reactive oxygen species (ROS) generation and induce direct electron transfer from SMX to PMS, resulting in efficient SMX degradation via both radical and non-radical pathways. Moreover, quenching experiments and electron paramagnetic resonance (EPR) measurements confirmed that single oxide (¹O₂) and superoxide radical (O₂^·-) are the dominant active species in the current system. Additionally, the possible SMX degradation routes were reasonably proposed based on liquid chromatography-mass spectrometry (LC-MS) results. This work provides an in-depth understanding of the role of BIEF in PMS activation, and expands the application of biochar-based materials in the field of environmental remediation.

Synthesis and Peroxide Activation Mechanism of Bimetallic MOF for Water Contaminant Degradation: A Review

Metal-organic framework (MOF) materials possess a large specific surface area, high porosity, and atomically dispersed metal active sites, which confer excellent catalytic performance as peroxide (peroxodisulfate (PDS), peroxomonosulfate (PMS), and hydrogen peroxide (H₂O₂)) activation catalysts. However, the limited electron transfer characteristics and chemical stability of traditional monometallic MOFs restrict their catalytic performance and large-scale application in advanced oxidation reactions. Furthermore, the single-metal active site and uniform charge density distribution of monometallic MOFs result in a fixed activation reaction path of peroxide in the Fenton-like reaction process. To address these limitations, bimetallic MOFs have been developed to improve catalytic activity, stability, and reaction controllability in peroxide activation reactions. Compared with monometallic MOFs, bimetallic MOFs enhance the active site of the material, promote internal electron transfer, and even alter the activation path through the synergistic effect of bimetals. In this review, we systematically summarize the preparation methods of bimetallic MOFs and the mechanism of activating different peroxide systems. Moreover, we discuss the reaction factors that affect the process of peroxide activation. This report aims to expand the understanding of bimetallic MOF synthesis and their catalytic mechanisms in advanced oxidation processes.

Highly efficient activation of peroxymonosulfate by cobalt ferrite anchored in P-doped activated carbon for degradation of 2,4-D: adsorption and electron transfer mechanism

The dispersing effect of carbon materials on nanoparticles can enhance the full exposure of their active sites. Herein, phosphorus (P)-doped activated carbon-supported trace cobalt ferrite composites (P-CoFe@BC_X) were achieved by two-step pyrolysis for efficient peroxymonosulfate (PMS) activation and water pollution remediation. The removal efficiency of 2,4-dichlorophenoxyacetic acid (2,4-D) was optimized by adjusting the coupling ratio of carbon substrate and cobalt ferrite. P-CoFe@BC₅/PMS oxidation system (0.10 g L^-1, 0.50 mM) eliminated 98.3% of 2,4-D (20.0 mg L^-1) within 60 min at unadjusted pH. The constructed adsorption enrichment and oxidative degradation pathways are highly efficient in utilizing reactive oxygen species (ROS), and the dual tracks of free and non-free radicals achieve the rapid degradation of 2,4-D. P-doped activated carbon acts as an electron shuttle to accelerate electron transfer between active sites and enhances the adsorption efficiency of 2,4-D and PMS onto the composites. In addition, the P-CoFe@BC₅/PMS oxidation system still exhibited strong 2,4-D removal performance at a wide pH range of 2.0-10.0. The inhibitory effect of environmental components was related to their concentration, such as chloride, bicarbonate, sulfate and humic acid. Density functional theory calculations show that ROS tends to attack the CO bond on the 2,4-D branch chain, and the degradation products show lower biological toxicity. Hence, the constructed cobalt ferrite anchored P-doped activated carbon activated PMS system has great potential in treating organic wastewater.

Catalytic oxidation activation of peroxymonosulfate over Fe-Co bimetallic oxides for flurbiprofen degradation

In this research, FeCo₂O₄ nanomaterial was successfully synthesized by a typical sol-gel method and conducted as an effective agent for peroxymonosulfate (PMS) activation to eliminate antibiotics flurbiprofen (FLU), a strong nonsteroidal drug. FeCo₂O₄ nanomaterial was characterized by XRD, TEM, SEM, and XPS. Various characterization results proved that FeCo₂O₄ held stable spinel structure. The interfering factors including initial pH, PMS concentration, catalyst dosage, inorganic anions, and humic acid on FLU removal were also discussed. The conclusion was that the removal efficiency of FLU reached 98.2% within 120 min after adding FeCo₂O₄ (0.4 g L^-1) and PMS (3 mM). The optimal pH for FLU degradation was the initial pH of 6.5; too acidic or alkaline was not conductive to the degradation. The existence of HA and Cl^- restrained the degradation of FLU, and HCO₃^- promoted the removal, while the influence of NO₃^- and SO₄^2- could not be considered. The radical scavenging experiment confirmed that ^•OH, O₂^•-, and SO₄^•- participated in FLU removal and SO₄^•- functioned a leading role. FeCo₂O₄ showed high efficiency for PMS activation in pH range of 3.0 to 10.0. After the fourth cycle operation, the FLU removal rate exceeded 76.9%, and the Co leaching rate was low during the catalytic reaction. This study shows that FeCo₂O₄ nanomaterial is an efficient and environment-friendly catalyst, which can be applied for PMS activation to remove organic pollutants in water.

Significant roles of surface functional groups and Fe/Co redox reactions on peroxymonosulfate activation by hydrochar-supported cobalt ferrite for simultaneous degradation of monochlorobenzene and p-chloroaniline

CoFe₂O₄/hydrochar composites (FeCo@HC) were synthesized via a facile one-step hydrothermal method and utilized to activate peroxymonosulfate (PMS) for simultaneous degradation of monochlorobenzene (MCB) and p-chloroaniline (PCA). Additionally, the effects of humic acid, Cl^-, HCO₃^-, H₂PO₄^-, HPO₄^2- and water matrices were investigated and degradation pathways of MCB and PCA were proposed. The removal efficiencies of MCB and PCA were higher in FeCo@HC140-10/PMS system obtained under hydrothermal temperature of 140 °C than FeCo@HC180-10/PMS and FeCo@HC220-10/PMS systems obtained under higher temperatures. Radical species (i.e., SO₄^•-, •OH) and nonradical pathways (i.e., ¹O₂, Fe (IV)/Co (IV) and electron transfer through surface FeCo@HC140-10/PMS* complex) co-occurred in the FeCo@HC140-10/PMS system, while radical and nonradical pathways were dominant in degrading MCB and PCA respectively. The surface functional groups (i.e., C-OH and CO) and Fe/Co redox cycles played crucial roles in the PMS activation. MCB degradation was significantly inhibited in the mixed MCB/PCA solution over that in the single MCB solution, whereas PCA degradation was slightly promoted in the mixed MCB/PCA solution. These findings are significant for the provision of a low-cost and environmentally-benign synthesis of bimetal-hydrochar composites and more detailed understanding of the related mechanisms on PMS activation for simultaneous removal of the mixed contaminants in groundwater.

Carbon nanotube-loaded copper-nickel ferrite activated persulfate system for adsorption and degradation of oxytetracycline hydrochloride

In this study, a new composite (MWCNTs-CuNiFe₂O₄) prepared by loading magnetic CuNiFe₂O₄ particles onto carboxylated carbon nanotubes (MWCNTs) through co-precipitation was applied to remove oxytetracycline hydrochloride (OTC-HCl) in solution. The magnetic properties of this composite could address of the issue of difficulty associated with the separation of MWCNTs from mixtures when applied as an adsorbent. In addition to the good adsorption properties recorded for MWCNTs-CuNiFe₂O₄ towards OTC-HCl, this developed composite could be used to activate potassium persulfate (KPS) for an efficient degradation of OTC-HCl. The MWCNTs-CuNiFe₂O₄ was systematically characterized using Vibrating Sample Magnetometer (VSM), Electron Paramagnetic Resonance (EPR) and X-ray Photoelectron Spectroscopy (XPS). The influence of dose of MWCNTs-CuNiFe₂O₄, the initial pH, the amount of KPS and the reaction temperature on the adsorption and degradation of OTC-HCl by MWCNTs-CuNiFe₂O₄ were discussed. The adsorption and degradation experiments showed that MWCNTs-CuNiFe₂O₄ exhibited an adsorption capacity of 270 mg·g^-1 for OTC-HCl with the removal efficiency 88.6% at 303 K (at an initial pH 3.52, 5 mg KPS, 10 mg composite, 10 mL reaction concentration 300 mg·L^-1 of OTC-HCl). The Langmuir and Koble-Corrigan models were used to describe the equilibrium process while the Elovich equation and Double constant model were suitable to describe the kinetic process. The adsorption process was based on single-molecule layer reaction and non-homogeneous diffusion process. The mechanisms of adsorption were complexation and hydrogen bond whereas active species such as SO₄^‧-, ^‧OH and ¹O₂ were confirmed to have played a major role in the degradation of OTC-HCl. The composite was also found to be very stable with good reusability property. These results confirm the good potential associated with the use of MWCNTs-CuNiFe₂O₄/KPS system for the removal of some typical pollutants from wastewater.

Core-shell magnetic CFO@COF composites toward peroxymonosulfate activation for degradation of sulfamethoxazole from aqueous solution: A comparative study and mechanistic consideration

A core-shell covalent organic framework encapsulated Co1.2Fe1.8O4 magnetic particles (CFO@COF) was designed and prepared successfully to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) degradation. It displays amazing catalytic reactivity since the unique interior structure and synergistic effect between COF shell and CFO core, reaching 99.8% removal of SMX (10 mg/L) within 30 min and 90.8% TOC removal. The synergy between bimetals vests high reactivity to CFO core. And the outer COF shell can stabilize the CFO core under intricate reaction conditions to restrain the leaching of Co ions (decreased from 0.75 to 0.25 mg/L). Further investigation compared the activation mechanism in two different system, CFO/PMS system and CFO@COF/PMS system. The result showed that the radical mechanism controlled by SO4⋅- guided the SMX degradation in CFO/PMS system whereas the 1O2 played a pivotal role in CFO@COF/PMS system called non-radical leading. The influences of various factors on degradation experiments and SMX degradation pathway were also studied. Most importantly, risk assessment in CFO@COF/PMS/SMX system was estimated via "ecological structure activity relationships". In most case, the toxicities of intermediates were lower than the initial samples, which confirmed the effectiveness of CFO@COF/PMS/SMX system in the reduction of toxicity of SMX.

Non-radical-dominated catalytic degradation of methylene blue by magnetic CoMoO4/CoFe2O4 composite peroxymonosulfate activators

In this study, magnetic CoMoO₄/CoFe₂O₄ (CMO/CFO) nanospheres with a core-shell structure were synthesized via two-step hydrothermal methods. The obtained particles were employed as catalysts to activate peroxymonosulfate (PMS) and degrade methylene blue (MB). The physico-chemical characterizations of the synthesized CMO/CFO showed that the CMO shell contributed to the enhancement of redox conversion and the increase in the concentration of oxygen vacancies (OVs). By examining reactive oxygen species (ROS) in the CMO/CFO/PMS system, the MB degradation was dominated by a non-radical pathway, and ¹O₂ was identified as the most abundant ROS. Besides, the CMO/CFO exhibited faster reaction kinetics than the pristine CFO. Moreover, the magnetic properties guaranteed the recycling and reuse of CMO/CFO, and the removal rate of MB was maintained at ∼94% after continuous use five times. Both the tolerance to SO₄^2-and the wide pH range where the material is applicable make it a promising catalyst for dyeing wastewater treatment.

Co-doped Fe3O4/α-FeOOH for highly efficient peroxymonosulfate activation to degrade trimethoprim: Occurrence of hybrid non-radical and radical pathways

Trimethoprim (TMP), as a widely used chemotherapeutic antibiotic agent, has caused potential risks to the aquatic environment. In this study, magnetic Co-doped Fe₃O₄/α-FeOOH was fabricated by a facile one-step ageing method and used for activation of peroxymonosulfate (PMS) in TMP degradation. It was found that low catalyst (0.5 g/L) and PMS addition (0.2 mM) led to the high degradation efficiency of TMP (97.2%, k_obs = 0.11211 min^-1) over a wide range of pH. The oxidation of active radical (SO₄·^-) and non-radical singlet oxygen (¹O₂) co-acted on TMP degradation. Besides, PMS was activated through the cycles between Co(II)/Co(III) and Fe(II)/Fe(III). Fifteen degradation intermediates of TMP were identified by LC-MS, and three possible degradation pathways including hydroxylation, demethylation, and cleavage were proposed. The recovered catalysts exhibited high stability and reusability, maintaining 80% TMP removal efficiency with inappreciable metal leaching (0.012 mg/L of Co, 0.113 mg/L of Fe) after six cycles. Besides, the Co-Fe₃O₄/α-FeOOH/PMS system was highly tolerant to inorganic anions and actual water bodies (river water, lake water, tap water, and sewage plant effluent). Overall, this work provided a promising way to the potential application of Fe-based binary metal oxide for PMS activation.

CoNi alloy anchored onto N-doped porous carbon for the removal of sulfamethoxazole: Catalyst, mechanism, toxicity analysis, and application

Developing highly efficient, stable, recyclable, and application value heterogeneous catalysts in advanced oxidation processes has essential application value in the degradation of refractory pollutants. In this paper, the CoNi alloy anchored onto N-doped porous carbon (CoNi-600@NC) catalyst was prepared using bimetallic doped metal-organic frameworks as precursors. The magnetic CoNi-600@NC can activate peroxymonosulfate (PMS) to degrade sulfamethoxazole (SMX). Therefore, SMX can be removed 100% within 25 min. CoNi-600@NC/PMS has a broad pH (3-9) application range, good applicability, and repeatability. Radical quenching, quantitative and electrochemical experiments proved that the degradation of SMX was dominated by free radical (Superoxide anions) and non-free radical pathways (surface-bound radicals). Mechanistic analysis showed that the interaction between Co-N_x/pyridine N-sites and graphitized carbon with PMS induced the formation of surface-bound active species. Moreover, CoNi nanoparticles promoted the redox cycle of metals. The synergistic catalytic mechanisms between the CoNi alloy and the abundant functional groups gave CoNi-600@NC excellent catalytic properties and applicability. Using density functional theory predicted the reaction sites of SMX and proposed four degradation pathways. The toxicity of intermediates was comprehensively evaluated. In addition, a CoNi-600@NC continuous flow reactor was constructed with a daily treatment capacity of 45 L and 100% SMX removal. This study expands the application of persulfate advanced oxidation technology by synthesizing recyclable magnetic catalysts and provides new synergistic degradation mechanisms for removing refractory organics.

Spinel ferrites materials for sulfate radical-based advanced oxidation process: A review

In the past decade, the sulfate radical-based advanced oxidation processes (SR-AOPs) have been increasingly investigated because of their excellent performance and ubiquity in the degradation of emerging contaminants. Generally, sulfate radicals can be generated by activating peroxodisulfate (PDS) or peroxymonosulfate (PMS). To date, spinel ferrites (SF) materials have been greatly favored by researchers in activating PMS/PDS for their capability and unique superiorities. This article reviewed the recent advances in various pure SF, modified SF, and SF composites for PDS/PMS activation. In addition, synthesis methods, mechanisms, and potential applications of SF-based SR-AOPs were also examined and discussed in detail. Finally, we present future research directions and challenges for the application of SF materials in SR-AOPs.

One-pot synthesis of a cellulose-supported CoFe2O4 catalyst for the efficient degradation of sulfamethoxazole

Cellulose-supported cobalt ferrite (CoFe₂O₄/RC) was synthesized via a facile one-pot hydrothermal method and demonstrated to be an efficient catalyst to activate peroxymonosulfate (PMS) for the degradation of sulfamethoxazole (SMX). The characterizations of CoFe₂O₄/RC catalysts revealed that an appropriate particle size of the cellulose support could promote the dispersion of CoFe₂O₄ nanoparticles and consequently promote the catalytic activity of the resulting CoFe₂O₄/RC catalysts. The degradation of SMX reached 97.6 % within 20 min at 30 °C with the CoFe₂O₄/RC/PMS system. The mechanism of SMX degradation over CoFe₂O₄/RC-activated PMS was studied via EPR, XPS, and quenching tests. The results suggested that ¹O₂ was the dominant reactive oxygen species and was accompanied by SO₄^-, OH, and O₂^- radicals for SMX degradation. The CoFe₂O₄/RC catalyst exhibited high stability and recyclability and maintained high catalytic activity after five experimental cycles.

Facile synthesis of CoFe2O4@BC activated peroxymonosulfate for p-nitrochlorobenzene degradation: Matrix effect and toxicity evaluation

p-Nitrochlorobenzene (p-NCB) is widely used in industry and poses a potential threat to the public health due to its persistence, carcinogenicity and mutagenicity. Herein, magnetic catalyst CoFe₂O₄@Biochar (CoFe₂O₄@BC) was synthesized by a facile sol-gel method, efficiently activating peroxymonosulfate (PMS) to degrade p-NCB. The synergistic effect of Fe and Co in well-dispersed CoFe₂O₄ and the electron transfer promote the production of reactive oxygen species (ROS) (OH, SO₄^- and O₂^-), efficiently removing p-NCB enriched by CoFe₂O₄@BC. Under optimum conditions, the CoFe₂O₄@BC/PMS system could remove 89% of p-NCB from water, and the degradation efficiency could reach 80% in soil. Toxic chlorinated intermediates appeared during the degradation process and thus efficient dechlorination process can lower the toxicity of the reaction solution, which was also proved by the oxygen uptake inhibition experiment as well as zebrafish toxicity experiments. Furthermore, p-NCB degradation efficiency could be inhibited by Cl^-, HCO₃^-, HPO₄^2- and humic acid (HA) through quenching effect or occupation of CoFe₂O₄@BC surface active sites while HPO₄^2- could also improve the efficiency by directly activating PMS. The CoFe₂O₄@BC/PMS system can be efficiently applied in the remediation of p-NCB pollution in water and soil.

Electro-enhanced sulfamethoxazole degradation efficiency via carbon embedding iron growing on nickel foam cathode activating peroxymonosulfate: Mechanism and degradation pathway

The combination of peroxymonosulfate (PMS) activation by hetero-catalysis and electrolysis (EC) attracted incremental concerns as an efficient antibiotics degradation method. In this work, carbon embedding iron (C@Fe) catalysts growing on nickel foam (NF) composite cathode (C@Fe/NF) was prepared via in-situsolvothermal growth and carbonization method and used to activate PMS toward sulfamethoxazole (SMX) degradation. The EC-[C@Fe/NF(II)]-PMS system exhibited an excellent PMS activation, with 100% SMX removal efficiency achieving within 30 min. Reactive oxygen species (ROS) generation and their roles in SMX degradation were confirmed by quenching experiments and electron paramagnetic resonance. It was found that singlet oxygen (¹O₂) and surface-bound radicals were responsible for SMX degradation, and ¹O₂ contributed the most. Furthermore, the possible SMX degradation pathways were proposed on the base of the detected degradation intermediates and density functional theory (DFT) calculation. Toxicity changes were also assessed by the Ecological Structure Activity Relationships (ESAR). This work provides a practicable strategy for synergistically enhancing PMS activation efficiency and promoting antibiotics removal.

Facile fabrication of surface vulcanized Co-Fe spinel oxide nanoparticles toward efficient 4-nitrophenol destruction

Developing efficient modulation strategies to boost the degradation efficiencies of non-noble metal catalysts for toxic phenolic compounds involving peroxymonosulfate (PMS)-based oxidation processes is essential but remains an arduous challenge. This study reports the one-pot construction of in-situ surface vulcanized CoFe₂O₄ @carbon (S_x-CF@C) to boost the PMS activation for 4-nitrophenol (4-NP) destruction. The direct pyrolysis of an aerogel precursor consisted of cobalt nitrate, ferric nitrate, melamine, and thiourea enables the as-formed S_x-CF@C with hierarchical structure, rich oxygen vacancies, and electron/mass transfer, thereby considerably promoting PMS activation performance of S_x-CF@C toward 4-NP degradation. Specifically, the optimal S_0.2-CF@C can achieve a removal efficiency of 99% for 4-NP destruction (20 mg/L) through PMS activation. Meanwhile, the catalyst also has generality to degrade a variety of antibiotic and dye organic pollutants. The radical quenching and electron paramagnetic resonance tests reveal the radical and non-radical activation mechanism in the S_0.2-CF@C/PMS system. The degradation pathway for 4-NP destruction over the S_0.2-CF@C/PMS system is proposed. This study provides an efficient approach to modulate the PMS activation performance of ferrite spinel materials toward the degradation of acute phenolic compounds.

Engineering single-atom Fe-Pyridine N4 sites to boost peroxymonosulfate activation for antibiotic degradation in a wide pH range

Single-atom Fe catalysts have shown great potential for Fenton-like technology in organic pollutant decomposition. However, the underlying reaction pathway and the identification of Fe active sites capable of activating peroxymonosulfate (PMS) across a wide pH range remain unknown. We presented a novel strategy for deciphering the production of singlet oxygen (¹O₂) by regulating the Fe active sites in this study. Fe single atoms loaded on nitrogen-doped porous carbon (Fe_SA-CN) catalysts were synthesized using a cage encapsulation method and compared to Fe-nanoparticle-loaded catalysts. It was discovered that Fe_SA-CN catalysts served as efficient PMS activators for pollutant decomposition over a wide pH range. Several analytical measurements and density functional theory calculations revealed that the pyridinic N-ligated Fe single atom (Fe-pyridine N₄) was involved in the production of ¹O₂ by the binding of two PMS ions, resulting in an excellent catalytic performance for PMS adsorption/activation. This work has the potential to not only improve the understanding of nonradical reaction pathway but to also provide a generalizable method for producing highly stable PMS activators with high activity for practical wastewater treatment.

Effective photocatalytic degradation of sulfamethoxazole using tunable CaCu3Ti4O7 perovskite

Sulfamethoxazole (SMX) is largely prescribed for bacterial infections but raises a major concern over generation of antibiotic-resistant bacteria in the environment. This study employed various perovskite-type photocatalysts, made by two-step synthesis procedures, to remove SMX. The as-synthesized CaCu₃Ti₄O₇ (CCTO) perovskites were characterized by XRD, SEM-EDX, and DLS. Complete degradation (∼99%; k_obs = 0.0279 min^-1) of SMX was recorded under UV-light irradiation for 90 min in the presence of CCTO. SMX removal rate was investigated under various reaction conditions including pH, catalyst dose, electrolyte (NaCl and NaBr). The astonishing rate of SMX removal (k_obs = 0.0614 min^-1) was observed with the addition of 50 mM NaBr electrolytes in the reaction, which might imply that the appearance of halogen reactive species. CCTO-MS particles were aggregated in traces when the electrolytes concentration increases, resulting in reduced rate of SMX. The SMX concentration abatement and the formation of possible intermediates during photocatalytic reaction were analyzed. The upshot of this study reveals that the inexpensive and environmentally benign CCTO perovskite photocatalyst could be applied for the treatments of emerging contaminants in the future.

Cu-Doped magnetic loofah biochar for tetracycline degradation via peroxymonosulfate activation

The Cu-doped deactivated magnetic biochar exhibited high PMS activation to degrade TC with a high removal rate of 97.6%.

Synergetic effect of photocatalysis and peroxymonosulfate activated by MIL-53Fe@TiO2 for efficient degradation of tetracycline hydrochloride under visible light irradiation

The MIL-53Fe was prepared by simple solvothermal method, and the MIL-53Fe photocatalysts showed lower photocatalytic activity for the degradation of tetracycline hydrochloride under visible light irradiation. After combined with TiO2,...

New FeOCl/graphene quantum dots catalyst for peroxymonosulfate activation to efficiently remove organic pollutants and inactivate Escherichia coli

The sulfate radical-based advanced oxidation processes (SR-AOPs) are well-established and efficient techniques for degradation of organic pollutants. Fe2+ is used as an environmentally friendly and cost-effective catalyst for activating peroxymonosulfate...