Efficient activation of peroxymonosulfate on CuS@MIL-101(Fe) spheres featured with abundant sulfur vacancies for coumarin degradation: Performance and mechanisms

Superlong cycle-life sodium-ion batteries supported by electrode/active material interaction and heteroatom doping: Mechanism and application

To achieve both the capacity and stability of metal sulfides simultaneously remains a significant challenge. In this study, we have synthesized the manganese-doped copper sulfide three-dimensional (3D) hollow flower-like sphere (M/CuS-NSC), encapsulated in a nitrogen and sulfur co-doped carbon. The hollow lamellae structure allows the rational self-aggregation process of numerous active surface area enlarged nanosheets, thereby enhancing electrochemical activity. The subsurface framework characterized by CSC bonds enhances the pseudo-capacitive properties. Furthermore, the transformation of sulfur and the isomerization of carbon contribute to the enhancement of sodium ion storage. The incorporation of Mn into CuS lattice increases the interplanar distance, providing additional space for the accommodation of sodium ions. Mn doping facilitates the localization of electrons near the Fermi level, thereby improving conductivity. Additionally, Cu foils coated with M/CuS-NSC-2 engage with the electrolyte and sulfur, initiating the reaction sequence through the formation of Cu9S8. Consequently, M/CuS-NSC-2 exhibits highly reversible capacities of 676.24 mAh g-1 after 100 cycles at 0.1 A g-1 and 511.52 mAh g-1 after 10000 cycles at 10 A g-1, with an average attenuation ratio of only 0.009 %. In this study, we propose an effective strategy that combines structural design with heteroatom doping, providing a novel approach to enhance the electrochemical performance of monometallic sulfide.

CuS/Bi2O3 composites activating PMS under visible light for efficient degradation of antibiotic tetracycline

CuS/Bi2O3 composite photocatalyst was prepared by calcination and in situ precipitation, and peroxymonosulfate (PMS) was applied to the degradation of tetracycline (TC) wastewater under visible light. The microscopic morphology, chemical composition, and optical properties of the composites were investigated by characterization means of XRD, FTIR, SEM, XPS, and UV-Vis DRS. The results showed that the introduction of CuS increased the specific surface area of Bi2O3 and increased the visible absorption boundary of Bi2O3 from 455 to 524 nm, which effectively inhibited the complexation of photogenerated electron-hole pairs. The experimental results showed that the introduction of PMS strengthened the removal of TC from the composites, and 95% of TC could be removed under visible light irradiation, and the reaction rate was 8.22 times higher than that of the unspiked PMS, indicating that the BC-15+vis/PMS catalytic system could degrade the pollutants efficiently. The radical capture experiments showed that several radicals, including ·OH, SO4·-, ·O2-, h+, and 1O2, were present in the catalytic system as the main active species to degrade TC, and the mechanism of photocatalytic activation of PMS by Z-type heterostructures of CuS/Bi2O3 composites was proposed. The present study showed that BC-15 has excellent degradation performance and stability, which provides new ideas for the treatment of antibiotic wastewater.

Efficient degradation of ciprofloxacin in wastewater by CuFe2O4/CuS photocatalyst activated peroxynomosulfate

In this study, CuFe2O4/CuS composite photocatalysts were successfully synthesized for the activation of peroxynomosulfate to remove ciprofloxacin from wastewater. The structural composition and morphology of the materials were analyzed by XRD, SEM, TEM, and Raman spectroscopy. The electrochemical properties of the samples were tested by an electrochemical workstation. The band gap of the samples was calculated by DFT and compared with the experimental values. The effects of different catalysts, oxidant PMS concentrations, and coexisting ions on the experiments were investigated. The reusability and stability of the photocatalysts were also investigated. The mechanism of the photocatalytic degradation process was proposed based on the free radical trapping experiment. The results show that the p-p heterojunction formed between the two contact surfaces of the CuFe2O4 nanoparticle and CuS promoted the charge transfer between the interfaces and inhibited the recombination of electrons and holes. CuFe2O4-5/CuS photocatalyst has the best catalytic activity, and the removal rate of ciprofloxacin is 93.7%. The intermediates in the degradation process were tested by liquid chromatography-mass spectrometry (LC-MS), and the molecular structure characteristics of ciprofloxacin were analyzed by combining with DFT calculations. The possible degradation pathways of pollutants were proposed. This study reveals the great potential of the photocatalyst CuFe2O4/CuS in the activation of PMS for the degradation of ciprofloxacin wastewater.

Role of Interface of Metal-Organic Frameworks and Their Composites in Persulfate-Based Advanced Oxidation Process for Water Purification

The persulfate activation-based advanced oxidation process (PS-AOP) is an important technology in wastewater purification. Using metal-organic frameworks (MOFs) as heterogeneous catalysts in the PS-AOP showed good application potential. Considering the intrinsic advantages and disadvantages of MOF materials, combining MOFs with other functional materials has also shown excellent PS activation performance and even achieves certain functional expansion. This Review introduces the classification of MOFs and MOF-based composites and the latest progress of their application in PS-AOP systems. The relevant activation/degradation mechanisms are summarized and discussed. Moreover, the importance of catalyst-related interfacial interaction for developing and optimizing advanced oxidation systems is emphasized. Then, the interference behavior of environmental parameters on the interfacial reaction is analyzed. Specifically, the initial solution pH and coexisting inorganic anions may hinder the interfacial reaction process via the consumption of reactive oxygen species, affecting the activation/degradation process. This Review aims to explore and summarize the interfacial mechanism of MOF-based catalysts in the activation of PS. Hopefully, it will inspire researchers to develop new AOP strategies with more application prospects.

Sulfur vacancy rich MoS2/FeMoO4 composites derived from MIL-53(Fe) as PMS activator for efficient elimination of dye: Nonradical 1O2 dominated mechanism

A novel MoS2/FeMoO4 composite was synthesized for the first time by introducing an inorganic promoter MoS2 into the MIL-53(Fe)-derived PMS-activator. The prepared MoS2/FeMoO4 could effectively activate peroxymonosulfate (PMS) toward 99.7% of rhodamine B (RhB) degradation in 20 min, and achieve a kinetic constant of 0.172 min-1, which is 10.8, 43.0 and 3.9 folds higher than MIL-53, MoS2 and FeMoO4 components, respectively. Both Fe(II) and sulfur vacancies are identified as the main active sites on catalyst surface, where sulfur vacancies can promote adsorption and electron migration between peroxymonosulfate and MoS2/FeMoO4 to accelerate peroxide bond activation. Besides, the Fe(III)/Fe(II) redox cycle was improved by reductive Fe0, S2- and Mo(IV) species to further boost PMS activation and RhB degradation. Comparative quenching experiment and in-situ electron paramagnetic resonance (EPR) spectra verified that SO4•-, •OH, 1O2 and O2•- were produced in the MoS2/FeMoO4/PMS system, while 1O2 dominates RhB elimination. In addition, the influences of various reaction parameters on RhB removal were examined and the MoS2/FeMoO4/PMS system exhibits good performance over a wide pH and temperature range, as well as coexistence with common inorganic ions and humic acid (HA). This study provides a new strategy for preparing MOF-derived composite with simultaneous introduction of MoS2 promotor and rich sulfur vacancies, and enables new insight into radical/nonradical pathway in PMS activation process.

New insight into the activation mechanism of hydrogen peroxide by greigite (Fe3S4) for benzene removal: The combined action of dissolved and surface bounded ferrous iron

Iron sulfides have attracted growing concern in heterogeneous Fenton reaction. However, the structure of iron sulfides is different from that of iron oxides and how the structures affect the activation property of hydrogen peroxide (H₂O₂) remains unclear. This study investigated benzene removal through the activation of H₂O₂ by the synthesized magnetite (Fe₃O₄) and greigite (Fe₃S₄). The structures of Fe₃O₄ and Fe₃S₄ were characterized by XRD and EPR, the electron transfer properties of Fe₃O₄ and Fe₃S₄ were analyzed by electrochemical workstation, XPS and DFT. It is revealed that the effective benzene removal rate of 88.86％ in the Fe₃S₄/H₂O₂ was achieved, which compared to 15.58％ obtainable from the Fe₃O₄/H₂O₂, with the apparent rate constant in the Fe₃S₄/H₂O₂ being approximately 65 times over that in the Fe₃O₄/H₂O₂. The better H₂O₂ activation by Fe₃S₄ was attributed to the significant roles of S (-II) and S vacancies in regulating the dissolution of ferrous iron ions, thus generating abundant free •OH radical. In addition, surface bounded ferrous iron of Fe₃S₄ could transfer more electrons to H₂O₂ and O₂ to generate more surface bounded •OH and •O₂^-. This study revealed the combined action of dissolved and surface bounded ferrous iron of greigite on H₂O₂ activation, and provides an efficient heterogeneous H₂O₂ activator for the remediation of organic contaminants in groundwater.

Peroxymonosulfate Activation by Photoelectroactive Nanohybrid Filter towards Effective Micropollutant Decontamination

Herein, we report and demonstrate a photoelectrochemical filtration system that enables the effective decontamination of micropollutants from water. The key to this system was a photoelectric–active nanohybrid filter consisting of a carbon nanotube (CNT) and MIL–101(Fe). Various advanced characterization techniques were employed to obtain detailed information on the microstructure, morphology, and defect states of the nanohybrid filter. The results suggest that both radical and nonradical pathways collectively contributed to the degradation of antibiotic tetracycline, a model refractory micropollutant. The underlying working mechanism was proposed based on solid experimental evidences. This study provides new insights into the effective removal of micropollutants from water by integrating state–of–the–art advanced oxidation and microfiltration techniques.

Sulfur vacancies on MoS2 enhanced the activation of peroxymonosulfate through the co-existence of radical and non-radical pathways to degrade organic pollutants in wastewater

The enhancement of vacancies in catalysts involving Fenton-like reactions is a promising way to remove organic pollutants in wastewater, but sulfur vacancies are rarely involved. In this work, MoS₂ containing defect sites were synthesized by a simple high-temperature treatment and then applied for activating peroxymonosulfate to eliminate organic pollutants in wastewater. The structure was characterized by several techniques such as XRD, BET, and XPS. Important influencing factors were systemically investigated. The results indicated that MoS₂ with sulfur vacancies possessed a higher catalytic activity than that of the parent MoS₂. The annealing temperature of the catalyst had a great effect on the removal of organic pollutants. Besides, the catalytic system had a wide pH range. Quenching and electron paramagnetic resonance (EPR) experiments indicated that the reaction system contained radical and non-radical species. The characterization results revealed that the defect sites in catalysts mainly strengthened the activity of catalysts. This study offers a new heterogeneous catalyst for the removal of organic pollutants via the peroxymonosulfate-based Fenton-like reactions.

Sulfur vacancies on MoS2 enhanced the activation of peroxymonosulfate to remove organic pollutants in wastewater.