Pre-grafting effect on improving adsorption efficiency of cellulose based biosorbent for Hg (II) removal from aqueous solution

A novel bio-based fluorescent N, P-CDs@CMC/PEI composite hydrogel for sensitive detection and efficient capture of toxic heavy metal ions

To address the serious environmental pollution problems of toxic heavy metal ions in water bodies, a novel fluorescent composite hydrogel N, P-CDs@CMC/PEI with a bio-based polymer matrix of carboxylmethyl cellulose (CMC), polyethylenimine (PEI) as a second interpenetrating network and N, P-doped carbon dots (N, P-CDs) as a fluorescent probe was prepared for simultaneous detection and capture of HMIs by a facile and simple one-step approach. The morphology, chemical structure, swelling ratio, mechanical strength and fluorescence property of these composite hydrogels were studied through varied characterization methods. The composite hydrogel showed sensitive and selective fluorescence response with Hg(II) and Fe(III) and the according LOD values were 0.48 and 0.27 mg L-1, respectively. The relationship between the types of the adsorbent, pH value, HMIs concentration and temperature on the adsorption capacity of these composite hydrogels were studied. The pseudo-second-order model and Langmuir model were applicable to explain the adsorption process of CPH2 for Hg(II) and Cr(VI). The maximum calculated adsorption capacities for the above targeted HMIs by Langmuir model were 846.7 and 289.5 mg g-1, respectively. Coexisting inorganic salts and organic acids in low concentration had little effects on Hg(II) and Cr(VI) removal and the composite hydrogel showed good recyclability and stability for Hg(II) and Cr(VI) removal after four cycles. The electrostatic attraction and coordination covalent bonds were responsible for the adsorption process.

Construction of cellulose-based hybrid hydrogel beads containing carbon dots and their high performance in the adsorption and detection of mercury ions in water

Cellulose-based adsorbents have been extensively developed in heavy metal capture and wastewater treatment. However, most of the reported powder adsorbents suffer from the difficulties in recycling due to their small sizes and limitations in detecting the targets for the lack of sensitive sensor moieties in the structure. Accordingly, carbon dots (CDs) were proposed to be encapsulated in cellulosic hydrogel beads to realize the simultaneous detection and adsorption of Hg (II) in water due to their excellent fluorescence sensing performance. Besides, the molding of cellulose was beneficial to its recycling and further reduced the potential environmental risk generated by secondary pollution caused by adsorbent decomposition. In addition, the detection limit of the hydrogel beads towards Hg (II) reached as low as 8.8 × 10-8 M, which was below the mercury effluent standard declared by WHO, exhibiting excellent practicability in Hg (II) detection and water treatment. The maximum adsorption capacity of CB-50 % for Hg (II) was 290.70 mg/g. Moreover, the adsorbent materials also had preeminent stability that the hydrogel beads could maintain sensitive and selective sensing performance towards Hg (II) after 2 months of storage. Additionally, only 3.3% of the CDs leaked out after 2 weeks of immersion in water, ensuring the accuracy of Hg (II) evaluation. Notably, the adsorbent retained over 80% of its original adsorption capacity after five consecutive regeneration cycles, underscoring its robustness and potential for sustainable environmental applications.

Adsorption removal of cationic dyes from wastewater using the corn straw modified with diethylenetriaminepentacetic acid ligand

Taking the thiazide cationic dye methylene blue (MB), triphenylmethane cationic dye crystal violet (CV), monoazo cationic dye cationic red 46 (R-46), and polycarboxycyanine cationic dye cationic rosé FG (P-FG) as the research objects, the adsorption behaviors of a self-made corn straw modified adsorbent HQ-DTPA-I for the dyes were investigated in depth. Under optimized conditions, HQ-DTPA-I can quickly adsorb most dyes within 3 min and reach equilibrium adsorption in 15-20 min. The removal rates of HQ-DTPA-I to MB, CV, R-46 and AP-FG can reach 95.28 %, 99.78 %, 99.28 % and 98.53 %, respectively. It also has good anti-interference ability for common ions present in most actual dye wastewater. For six consecutive adsorption-desorption cycles, the adsorption performance of HQ-DTPA-I can still reach 80.17 %, 81.61 %, 90.77 % and 83.48 % of the initial adsorption capacity, indicating good recovery performance. Based on Gaussian density functional theory to calculate its surface potential energy, it is found that the adsorption mechanism of HQ-DTPA-I for the cationic dyes is mainly due to the electrostatic interaction between the carboxyl groups in ligand DTPA and amino groups in dye molecules.

Efficient and selective capture of various mercury species from water using an exfoliated thiocellulose

The primary challenge in mercury (Hg) adsorbents for large-scale practical applications is to achieve the balance between performance and economy. This work attempts to address this issue by synthesizing an exfoliated thiocellulose (CU-SH) with high thiol density and hierarchical porosity using in-situ ligands grafting combined with chemical stripping. The prepared CU-SH shows remarkable physical stability and chemical resistance, and the micron sized fiber is conducive to separation from water. Hg(II) adsorption tests in water demonstrate that CU-SH has broad working pH range (1-12), fast kinetics (0.64 g/(mg‧min)), high adsorption capacity (652.9 mg/g), outstanding selectivity (Kd = 6.2 × 106 mg/L), and excellent reusability (R > 95 % after 20 cycles). Importantly, CU-SH exhibits good resistance to various coexisting ions and organic matter, and can efficiently remove Hg(II) from different real water. CU-SH can be made into a Point of Use (POU) device for continuous and efficient removal of Hg(II) from drinking water. 0.1 g CU-SH filled device can purify 3.2 L of Hg(II) (0.5 ppm) contaminated tap water before the breakthrough point of 2 ppb. Moreover, CU-SH also reveals good adsorption affinity for Hg-dissolved organic matter complexes (Hg(II)-DOM) in water, chloro(phenyl)mercury (PMC) in organic media and Hg0 vapor in air, suggesting the great practical potential of CU-SH.

DOTA functionalized adsorbent DOTA@Sludge@Chitosan derived from recycled shrimp shells and sludge and its application for lead and chromium removal from water

DOTA@Sludge@Chitosan was synthesized by a facile treatment using DOTA (1,4,7,10-tetraazacyclododecane-N,N',N,N'-tetraacetic acid) to modify dry sludge and chitosan in an acidic solution. The performance of developed DOTA@Sludge@Chitosan was investigated for the adsorptive removal of Cr6+ and Pb2+ from water. Characterization studies showed that the materials possess a large surface area (52.009 m2/g), pore volume (0.069 cm3/g), and abundant functional groups of amino and hydroxyl. The prepared material showed a synergetic effect due to carboxylic acid and sludge, effectively removing Cr6+ and Pb2+. It reached 329.4 mg/g (Pb2+) and 273.3 mg/g (Cr6+) at 20 °C, much higher than commercial activated carbon. The regeneration of the adsorbent was tested for six adsorption and desorption cycles. The results demonstrate that the DOTA@Sludge@Chitosan adsorbent well-maintained high adsorption capacity attributed to its stability, making it a promising adsorbent for heavy metals removal from industrial effluent.

Utilizing adsorption of wood and its derivatives as an emerging strategy for the treatment of heavy metal-contaminated wastewater

The rapid development of the industrial sector has resulted in tremendous economic growth. However, this growth has also presented environmental challenges, specifically due to the substantial sewage generated and its contribution to the early warning of global water resource depletion. Large concentrations of poisonous heavy metals, including cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and nickel (Ni), are found in industrial effluent. Therefore, various studies are currently underway to provide effective solutions to alleviate heavy metal ion pollution in sewage. One emerging strategy for sewage pollution remediation is adsorption using wood and its derivatives. This approach is gaining popularity due to the porous structure, excellent mechanical properties, and easy chemical modification of wood. Recent studies have focused on removing heavy metal ions from sewage, summarising and analysing different technical principles, affecting factors, and mainstream chemical modification methods on wood. Furthermore, this work provides insight into potential future development direction for enhanced adsorption of heavy metal ions using wood and its derivatives in wastewater treatment. Overall, this review aims to raise awareness of environmental pollution caused by heavy metals in sewage and promote green environmental protection, low-carbon energy-saving, and sustainable solutions for sewage heavy metal treatment.

Advances in green materials derived from wood for detecting and removing mercury ions in water

The issue of mercury pollution in environmental remediation has garnered significant attention due to its severe health hazards to humans. Various strategies have been devised to mitigate the impact of toxic mercury ions, including coagulation, ion exchange, adsorption, membrane technology, and electrochemical treatment. Among these approaches, adsorption has emerged as an efficient and widely employed method for the uptake of low concentrations of mercury ions. It offers convenient operation, high removal efficiency, and facile regeneration of the adsorbent. Wood, being the most abundant renewable and sustainable bioresource, has garnered attention as a promising material for treating heavy metal wastewater. This is attributed to its unique physical and chemical characteristics, encompassing hierarchical pores, aligned channels, active functional groups, biodegradability, and cost-effectiveness. However, a comprehensive examination of the cutting-edge applications of wood and wood-derived biopolymers in the detection and removal of mercury ions from wastewater has yet to be undertaken. Consequently, this article presents a chronological overview of recent advancements in materials and structures derived from bulk wood and its constituents, including cellulose, lignin, hemicellulose, and tannin, with a specific focus on their utility in detecting and eliminating mercury from water sources. Subsequently, the most promising techniques and strategies involving wood and wood-derived biopolymers in addressing the predicament of mercury pollution are explored. Furthermore, this piece offers insights into the existing challenges and future prospects concerning environmentally friendly materials derived from wood, aiming to foster the development of cost-effective mercury adsorbents and detection devices.

Dansyl-labelled cellulose as dual-functional adsorbents for elimination and detection of mercury in aqueous solution via aggregation-induced emission

Dansyl chloride fluorophore exhibits typical aggregation induced fluorescence emission behavior in acetone/water solution. To realize the integration of detective and adsorptive functions, dansyl chloride is covalently immobilized on cellulose substrate to fabricate an efficient adsorbent for mercury ions in water. The as-prepared material exhibits excellent fluorescence sensing performance exclusively for Hg (II) with the presence of other metal ions. A sensitive and selective fluorescence quenching across the concentration range of 0.1-8.0 mg/L is observed with a detection limit of 8.33 × 10^-9 M as a result of the inhibition of aggregation induced emission caused by the coordination between adsorbent and Hg (II). Besides, the adsorption properties for Hg (II) including the influence of initial concentration and contact time are investigated. Langmuir model and pseudo-second-order kinetics are demonstrated to fit well with the adsorption experiment for the uptake of Hg (II) by the functionalized adsorbent, also, intraparticle diffusion kinetic model is proved to aptly describe the Hg (II) removal in aqueous solution. In addition, the recognition mechanism is considered to originate from the Hg (II) triggered structural reversals of naphthalene ring units which are verified by the X-ray photoelectron spectroscopy and density functional theory calculation. Moreover, the synthesis method used in this work also provides a strategy for the sensing application of organic sensor molecules with AIE properties in which the aggregated behavior could be appropriately realized.

Effective assessment of biopolymer-based multifunctional sorbents for the remediation of environmentally hazardous contaminants from aqueous solutions

Persistent contaminants in wastewater effluent pose a significant threat to aquatic life and are one of the most significant environmental concerns of our time. Although there are a variety of traditional methods available in wastewater treatment, including adsorption, coagulation, flocculation, ion exchange, membrane filtration, co-precipitation and solvent extraction, none of these have been found to be significantly cost-effective in removing toxic pollutants from the water environment. The upfront costs of these treatment methods are extremely high, and they require the use of harmful synthetic chemicals. For this reason, the development of new technologies for the treatment and recycling of wastewater is an absolute necessity. Our way of life can be made more sustainable by the synthesis of adsorbents based on biomass, making the process less harmful to the environment. Biopolymers offer a sustainable alternative to synthetic polymers, which are manufactured by joining monomer units through covalent bonding. This review presents a detailed classification of biopolymers such as pectin, alginate, chitosan, lignin, cellulose, chitin, carrageen, certain proteins, and other microbial biomass compounds and composites, with a focus on their sources, methods of synthesis, and prospective applications in wastewater treatment. A concise summary of the extensive body of knowledge on the fate of biopolymers after adsorption is also provided. Finally, consideration is given to open questions about future developments leading to environmentally friendly and economically beneficial applications of biopolymers.

Bis-Schiff base cellulosic nanocrystals for Hg (II) removal from aqueous solution with high adsorptive capacity and sensitive fluorescent response

Mercury pollution in aqueous solutions is a severe problem in environmental protection and the contaminated water may cause serious risks to human health. Based on the constant development of adsorptive materials, adsorption technique is widely applied as an efficient and convenient approach to eliminate mercury species from waters. In this work, we report a one-pot procedure to prepare a bis-Schiff base cellulosic adsorbent to integrate the advantages of large adsorptive capacity and excellent fluorescent recognition towards mercury ions. The adsorption experiments demonstrate that sulfydryl-contained cellulosic nanocrystals exhibit specific affinity with mercury species and the adsorption capacity reaches as high as 624.8 mg/g at room temperature. Besides, the introduction of rhodamine moiety endows the material a 19 times enhancement of selective "off-on" fluorescent sensing while exposed to mercury. Additionally, the bifunctional adsorbent material shows high sensitivity towards mercury ions in aqueous solution with detection limits of as low as 8.29 × 10^-8 M for fluorescence and 5.9 × 10^-9 M for UV-vis spectrum, respectively. The fitting results of the adsorption models indicate a monolayer adsorption during the uptake of mercury ions and the removal process follows the pseudo-second order kinetics. Moreover, density functional theory studies are employed to further understand the adsorptive and responsive mechanisms.

Adsorption of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose beads: Characterization, toxicity tests, and adsorption experiments

Mercury (Hg) is widely used in many industrial processes and is released into the environment. Therefore, efficient removal of Hg from water is of vital importance worldwide. Here, we explored the adsorption characteristics of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose (PEI-CMC) beads and studied the toxicity of the beads toward Daphnia magna and Pseudokirchneriella subcapitata. The PEI-CMC beads had an average particle size of 2.04 ± 0.25 mm, a point of zero charge (pH_pzc) of 5.8, and a swelling ratio of 2.45. Acute toxicity tests demonstrated that the PEI-CMC beads had no toxic effects on D. magna. The growth inhibition tests revealed that growth inhibition of P. subcapitata could be attributed to adsorption of trace elements in growth media on the PEI-CMC beads. The adsorption experiments exhibited that the Matthews and Weber model best described the kinetic data, whereas the Redlich-Peterson model was well fitted to the isotherm data. The theoretical maximum Hg(II) adsorption capacity of the PEI-CMC beads was 313.1 mg/g. The thermodynamic experiments showed endothermic nature of the Hg(II) adsorption on the PEI-CMC beads at 10-40 °C. The adsorption experiments exhibited that the Hg(II) adsorption capacity decreased gradually as pH increased from 2 to 12. The adsorption of Hg(II) on the PEI-CMC beads can occur through chelation and electrostatic attraction. The FTIR and XPS spectra before and after Hg(II) adsorption confirmed that chelation of neutral Hg(II) species (HgCl₂, HgClOH, and Hg(OH)₂) can occur with amino and oxygen-containing functional groups on the PEI-CMC beads. Considering species distribution of Hg(II) and the pH_pzc of the PEI-CMC beads, electrostatic attraction between the positively-charged beads and anionic Hg(II) species (HgCl₃^- and HgCl₄^2-) can take place in highly acidic solutions. The PEI-CMC beads were regenerated and reused for Hg(II) adsorption using 0.1 M HCl.

Bioimmobilization and transformation of chromium and cadmium in the fungi-microalgae symbiotic system

Microalgae and fungi in the fungi-microalgae symbiotic system(FMSS) can solve the problems of deep purification of heavy metals in wastewater and harvesting of microalgae cell by synergistic interaction. Therefore, it is of great significance to use the FMSS for remediation of heavy metal pollution. However, at present, the immobilization and transformation mechanism of heavy metals in the FMSS is not clear, which limits the development and industrial application of the FMSS with high adsorption performance, high selectivity, and high tolerance. In this study, the FMSS constructed using Aspergillus funigatus and Synechocystis sp. PCC6803, was used as the research object to explore heavy metal adsorption performance. Under optimal conditions, the adsorption efficiencies of Cd(II) and Cr(VI) were as high as 90.02% and 80.03%, respectively. The adsorption process was controlled by both internal and external diffusion. Extracellular absorption was dominant, and intracellular absorption was secondary. XRD, XPS, SEM-EDX and TEM-EDX results revealed that ionic crystals and precipitates (Cd(OH)₂, CdCO₃, calcium oxalate crystals, Cr(OH)₃, Cr₂O₃, and CrCl₃) were formed after adsorption. The adsorption of Cr(VI) involved the reduction of Cr(VI). Functional groups, such as amino, carboxyl, aldehyde, and ether groups, on the cell surface also interact with heavy metal ions. To summarize, by constructing the FMSS, optimizing the symbiosis conditions, exploring the adsorption and accumulation rules of Cd(II) and Cr(VI) inside and outside the cells in the system, and revealing the molecular response mechanism, we were able to establish a theoretical basis for further understanding the interaction between the FMSS and heavy metals.

Feasible synthesis of bifunctional polysilsesquioxane microspheres for robust adsorption of Hg(II) and Ag(I): Behavior and mechanism

The pollution of Hg(II) and Ag(I) to water system exerts hazardous effect to aquatic ecosystem and public security. Simple strategy for constructing adsorbents to efficient remove them is greatly desired. Thus, a series of thiol and amino groups containing bifunctional polysilsesquioxanes (ASPSS) microspheres with adjustable porous structure and functional group content were synthesized by one-step feasible sol-gel process. The adsorption behavior and mechanism of ASPSS microspheres toward Hg(II) and Ag(I) was thoroughly determined. The maximum adsorption capacity of ASPSS for Hg(II) and Ag(I) are 4.32 and 3.86 mmol·g^-1 under 25 ℃. The as-prepared ASPSS microspheres can 100% selectively capture Hg(II) with the coexisting of Mn(II), Co(II), Pb(II), Cd(II), Cu(II), Fe(III). And they can 100% adsorb Ag(I) with the presence of Cd(II), Pb(II), Co(II), Ni(II), and Zn(II). Moreover, the ASPSS microspheres exhibit good removal efficiency for Hg(II) and Ag(I) from simulated industrial wastewater with the coexistence of multiple pollutants. Adsorption mechanism suggests the adsorption for Hg(II) and Ag(I) is the synergistic coordination effect of amino and thiol groups. The excellent adsorption selectivity for Hg(II) and Ag(I) is attributed to the super binding ability of these functional group. ASPSS microspheres also exhibit good regeneration ability and could be reused for removing Hg (II) and Ag(I) from aqueous solution with practical value.

Green and Superior Adsorbents Derived from Natural Plant Gums for Removal of Contaminants: A Review

The ubiquitous presence of contaminants in water poses a major threat to the safety of ecosystems and human health, and so more materials or technologies are urgently needed to eliminate pollutants. Polymer materials have shown significant advantages over most other adsorption materials in the decontamination of wastewater by virtue of their relatively high adsorption capacity and fast adsorption rate. In recent years, "green development" has become the focus of global attention, and the environmental friendliness of materials themselves has been concerned. Therefore, natural polymers-derived materials are favored in the purification of wastewater due to their unique advantages of being renewable, low cost and environmentally friendly. Among them, natural plant gums show great potential in the synthesis of environmentally friendly polymer adsorption materials due to their rich sources, diverse structures and properties, as well as their renewable, non-toxic and biocompatible advantages. Natural plant gums can be easily modified by facile derivatization or a graft polymerization reaction to enhance the inherent properties or introduce new functions, thus obtaining new adsorption materials for the efficient purification of wastewater. This paper summarized the research progress on the fabrication of various gums-based adsorbents and their application in the decontamination of different types of pollutants. The general synthesis mechanism of gums-based adsorbents, and the adsorption mechanism of the adsorbent for different types of pollutants were also discussed. This paper was aimed at providing a reference for the design and development of more cost-effective and environmentally friendly water purification materials.

Enhanced adsorption of copper ions from aqueous solution by two-step DTPA-modified magnetic cellulose hydrogel beads

Copper contamination of water is one of the most pressing environmental problems which has attracted extensive concern in recent decades. In this study, a series of magnetic adsorbents were synthesized by two-step modified cellulose with N-[3-(trimethoxysilyl)propyl]ethylenediamine (KH-792) and diethylenetriaminepentaacetic acid (DTPA) using for removal of Cu(II) from aqueous solutions. Adsorption performance of Cu(II) was systematically investigated under various treatment conditions as the effect of solution pH, contact time, initial concentration and temperature. The adsorption process was found to match better with the pseudo-second-order kinetics model, and the equilibrium adsorption data were well described by Langmuir model, which meant predominant governance of monolayer chemical adsorption. The analysis of FTIR and XPS confirmed the possible adsorption mechanism between Cu(II) and the synthesized adsorbents was electrostatic attraction and the chemical coordination. Compared with MCCs and APMC, DPMC showed higher adsorption capacity of Cu(II), reaching maximum adsorption capacity of 298.62 mg·g^-1 at pH 6. Given this, ease of preparation, low cost and excellent reusability, DPMC will be promising adsorbent for application in Cu(II) removal from wastewater.

Multifunctional Cellulose and Cellulose-Based (Nano) Composite Adsorbents

In recent years, faced with the improvement of environmental quality problems, cellulose and cellulose-based (nano) composites have attracted great attention as adsorbents. In this review article, we first report the recent progress of modification and functionalization of cellulose adsorbents. In addition, the adsorbents produced by the modification and functionalization of carboxymehyl cellulose are also introduced. Moreover, the cellulose-based (nano) composites as adsorbents are reviewed in detail. Finally, the development prospect of cellulose and cellulose-based (nano) composites is studied in the field of the environment. In this review article, a critical comment is given based on our knowledge. It is believed that these biomass adsorbents will play an increasingly important role in the field of the environment.

A novel fluorometric chemosensor based on imidazo[4,5-b]phenazine-2-thione for ultrasensitive detection and separation of Hg2+ in aqueous solution

We synthesized and developed 1,3-dihydro-2H-imidazo[4,5-b]phenazine-2-thione as a ratiometric chemosensor for Hg2+ recognition in a DMSO/H2O (v/v = 9:1) binary solution. We rationally introduced the phenazine imidazole group as the fluorophore and the thione moiety as the recognition site to bind Hg2+. Interestingly, the chemosensor showed an ultrasensitive response to Hg2+, and the lowest limit of detection was 0.167 nM. In addition, it can also separate Hg2+ from aqueous solutions with excellent ingestion capacity, with an adsorption ratio of up to 96%. Furthermore, ion test strips based on chemosensors were fabricated for convenient and efficient detection of Hg2+.