Fabrication of MIL-Fe (53)/modified g-C3N4 photocatalyst synergy H2O2 for degradation of tetracycline

Ligand modulated charge transfers in Z-scheme configured Ni-MOF/g-C3N4 nanocomposites for photocatalytic remediation of dye-polluted water

The development of photocatalysts must be meticulous, especially when they are designed to degrade hazardous dyes that cause mutagenesis and carcinogenesis. In this meticulous approach, Ni-based metal-organic frameworks with different ligands, including terephthalic acid (NTP), 2-aminoterephthalic acid (NATP), and their composite with g-C3N4 (NTP/GCN, and NATP/GCN) have been synthesized using hydrothermal method. Structural analysis by XRD and ATR-IR revealed synergistic properties due to robust chemical interactions between the NATP-MOFs and GCN systems. A flower-like morphology was observed for both NTP and NATP, while their composites showed mixed-particulate structures mimicking the morphology of GCN. Optical analyses indicated visible-light driven properties with modulated recombination resistance in the system. Among the synthesized bare and composite systems, NATP/GCN exhibited the highest photocatalytic degradation efficiency for the cationic rhodamine B dye (~ 93% in 120 min), while it was relatively less efficient for the anionic Congo red dye, (~ 64% in 120 min). The insights gained from the fundamental characterizations including Mott-Schottky, scavenger, and electrochemical impedance analysis revealed that the amino-groups in NATP/GCN composite offered the band edge potentials suitable for the effective generation of energetic radical species with the improved carrier delocalization, recombination resistance, and charge transfer properties in the composite system through Z-scheme formation. Parametric investigations by varying the concentration of catalyst, dye, and pH along with recycle studies, demonstrated the excellent stability of the developed composites for sustainable photocatalytic applications.

Synergistic Ag/g-C3N4 H2O2 System for Photocatalytic Degradation of Azo Dyes

Graphitic carbon nitride (g-C3N4), known for being nontoxic, highly stable, and environmentally friendly, is extensively used in photocatalytic degradation technologies. Silver nanoparticles effectively capture the photogenerated electrons in g-C3N4, enhancing the photocatalytic efficiency. This study primarily focused on synthesizing graphitic carbon nitride via thermal polymerization and depositing noble metal silver onto g-C3N4 through photoreduction. Methyl orange (MO) and methylene blue (MB) were targeted as the pollutants in the photocatalytic experiments under visible light in conjunction with a H2O2 system. The characteristics peaks, structure, and morphology were analyzed using Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). g-C3N4 loaded with 6% Ag exhibited superior photocatalytic performance; the photocatalytic fraction of the degraded materials of the MO and MB solutions reached 100% within 70 and 80 min, respectively, upon adding 1 mL and 2 mL of H2O2. ·OH and ·O2- were the primary active free radicals in the dye degradation process within the synergistic system. Stability tests also demonstrated that the photocatalyst maintained good reusability under the synergistic system.

Sustainable design of photo-Fenton-like oxidation process in actual livestock wastewater through the highly dispersed FeCl3 anchoring on a g-C3N4 substrate

Photocatalytic technology emerges as a promising solution for the sustainable treatment of contaminated wastewater. However, the practical implementation of designed photocatalysts often faces challenges due to the intricate 'high carbon footprint' process and limited outdoor laboratory investigations. Herein, a simple yet versatile impregnation approach is proposed to anchor highly dispersed FeCl3 on a g-C3N4 substrate (Fe-C3N4) with minimal energy consumption and post-processing. Fe-C3N4 enhances photocatalytic reactivity for antibiotic degradation via a synergistic photo-Fenton-like oxidation technique, efficiently removing antibiotic pollutants from actual livestock wastewater. The Fe-C3N4 catalyst exhibited consistent degradation performance over five cycles in laboratory conditions, maintaining a degradation efficiency exceeding 90 % for tetracycline hydrochloride (TCHCl). Furthermore, we engineered a straightforward Fe-C3N4Na2SiO3 reactor for treating livestock wastewater, achieving an 81.8 % removal of TCHCl in outdoor field tests conducted in the winter and summer in China. The Fe-C3N4 catalyst demonstrated high feasibility in treating antibiotic-contaminated livestock wastewater under year-round climatic conditions, leveraging synergistic effects. The stabilization of Fe-C3N4 for the degradation of antibiotic-containing wastewater under sunlight represents a significant advancement in the practical application of photocatalysts, marking a crucial milestone from experimental conception to implementation. Acute toxicity estimation suggested that intermediates/products generated exhibited lower toxicity compared to TCHCl, indicating their practical applicability. Density functional theory (DFT) analysis successfully predicted significant electron transfer between Fe-C3N4 and TCHCl, indicating efficient interfacial interactions on the TCHCl surface. To ensure the environmental sustainability of Fe-C3N4, a life cycle assessment (LCA) was conducted to compared this photocatalyst with other commonly used emerging photocatalysts. The results demonstrated that Fe-C3N4 exhibits a two orders of magnitude lower CO2 equivalent emission compared to the ZnO photocatalyst, indicating a cost-effective and efficient synergistic photo-Fenton-like catalytic approach. This low-cost photocatalyst, moving from the laboratory to real-world wastewater applications, provides a powerful and more sustainable solution for the efficient treatment of wastewater containing antibiotics from livestock farming.

Z-scheme heterojunction composed of Fe-doped g-C3N4 and Bi2MoO6 for photo-fenton degradation of antibiotics over a wide pH range: Activity and toxicity assessment

In photo-Fenton technology, the narrower pH range limits its practical application for antibiotic wastewater remediation. Therefore, in this study, a Z-scheme heterojunction photo-Fenton catalyst was constructed by Fe-doped graphite-phase carbon nitride in combination with bismuth molybdate for the degradation of typical antibiotics. Fe doping can shorten the band gap and increase visible-light absorption. Simultaneously, the constructed Z-scheme heterojunction provides a better charge transfer pathway for the photo-Fenton reaction. Within 30 min, Fe3CN/BMO-3 removed 95.54% of tetracycline hydrochloride (TC), and its remarkable performance was the higher Fe3+/Fe2+ conversion efficiency through the decomposition of H2O2. The Fe3CN/BMO-3 catalyst showed remarkable photo-Fenton degradation performance in a wide pH range (3.0-11.0), and it also had good stability in the treatment of TC wastewater. Furthermore, the order of action of the active species was h+ > ·O2- > 1O2 > ·OH, and the toxicity assessment suggested that Fe3CN/BMO-3 was effective in reducing the biotoxicity of TC. The catalyst proved to be an economically feasible and applicable material for antibiotic photo-Fenton degradation, and this study provides another perspective on the application of elemental doping and constructed heterojunction photo-Fenton technology for antibiotic water environmental remediation.

Electron transfer mediated photo-Fenton-like synergistic catalysis of Fe,Cu-doped MIL-101 coupled with Ag3PO4: Quantitative evaluation and DFT calculations

Widespread use of tetracycline (TC) results in its persistent residue and bioaccumulation in aquatic environments, posing a high toxicity to non-target organisms. In this study, a bimetal-doped composite material Ag3PO4/MIL-101(Fe,Cu) has been designed for the treatment of TC in aqueous solutions. As the molar ratio of Fe/Cu in composite is 1:1, the obtained material AP/MFe1Cu1 is placed in an aqueous environment under visible light irradiation in the presence of 3 mM peroxydisulfate (PDS), which forms a photo-Fenton-like catalytic system that can completely degrade TC (10 mg/L) within 60 min. Further, the degradation rate constant (0.0668 min-1) is 5.66 and 7.34 times higher than that of AP/MFe and AP/MCu, respectively, demonstrating a significant advantage over single metal-doped catalysts. DFT calculations confirm the strong adsorption capacity and activation advantage of PDS on the composite surface. Therefore, the continuous photogenerated electrons (e-) accelerate the activation of PDS and the production of SO4•-, resulting in the stripping of abundant photogenerated h + for TC oxidation. Meanwhile, the internal circulation of FeⅢ/FeⅡ and CuⅡ/CuⅢ in composite also greatly enhances the photo-Fenton-like catalytic stability. According to the competitive dynamic experiments, SO4•- have the greatest contribution to TC degradation (58.93%), followed by 1O2 (23.80%). The degradation intermediates (products) identified by high-performance liquid chromatography-mass spectrometry (HPLC/MS) technique indicate the involvement of various processes in TC degradation, such as dehydroxylation, deamination, N-demethylation, and ring opening. Furthermore, as the reaction proceeds, the toxicity of the intermediates produced during TC degradation gradually decreases, which can ensure the safety of the aquatic ecosystem. Overall, this work reveals the synergy mechanism of PDS catalysis and photocatalysis, as well as provides technical support for removal of TC-contaminated wastewater.

Singlet Oxygen Formation Mechanism for the H2O2-Based Fenton-like Reaction Catalyzed by the Carbon Nitride Homojunction

The singlet oxygen (1O2) oxidation process activated by metal-free catalysts has recently attracted considerable attention for organic pollutant degradation; however, the 1O2 formation remains controversial. Simultaneously, the catalytic activity of the metal-free catalyst limits the practical application. In this study, carbon nitride (HCCN) containing an intramolecular homojunction, a kind of metal-free catalyst, exhibits excellent activity compared to g-C3N4 (CN) and crystalline carbon nitride (HCN) for tetracycline hydrochloride degradation through the H2O2-based Fenton-like reaction. The rate constant for HCCN increased about 16.1 and 8.9 times than that of CN and HCN, respectively. The activity of HCCN was enhanced, and the dominant reactive oxygen species (ROS) changed from hydroxyl radicals (•OH) to 1O2 with an increase in pH from 4.5 to 11.5. A novel formation pathway of 1O2 was revealed. This result is different from the normal reference, in which •OH is always the primary ROS in the H2O2-based Fenton-like reaction. This study may provide a possible strategy for the investigation on the nonradical oxidation process in the Fenton-like reaction.

The ortho-substituent effect regulating the separation of photogenerated carriers to efficiently photodegrade tetracycline on the surface of FeCo-based MOFs

It is feasible to improve the photodegradation efficiency of organic pollutants by metal-organic frameworks (MOF)-based semiconductors via ligand engineering. In this work, three (Fe/Co)-XBDC-based MOFs were synthesized by introducing different ortho-functional groups X (X = -H, -NO2, -NH2) next to the carboxyl group of the organic ligand (i.e., terephthalic acid). The analysis focused on the influence mechanism of the adjacent functional group effect of the ligand on the physicochemical properties of the material and the actual photodegradation activity of TC. Multiple pieces of evidences suggested that the differences in electron-induced and photocharge-transfer mechanisms of the above ortho functional groups affect the crystal morphology and photocatalytic activity of FeCo-MOF during pyrolysis. Interestingly, (Fe/Co)-NH2BDC exhibited the highest photocatalytic activity under neutral conditions. The results of density functional theory show that the introduction of a strong donor-NH2 group can enhance light absorption and act as an "electron pump" to supply electrons to the iron center, accelerating the separation and efficient transport of photogenerated carriers on the ligand-metal bridge. In conclusion, this study is a proposal for a strategy of structural regulation for the enhancement of the catalytic activity of (Fe/Co)-MOFs in the photodegradation of TC.

Enhanced tetracycline degradation with TiO2/natural pyrite S-scheme photocatalyst

In this study, TiO2 nanoparticles were employed as a photocatalyst for the degradation of tetracycline (TC) under visible light irradiation. The TiO2 nanoparticles were decorated on natural pyrite (TiO2/NP) and characterized using XRD, FTIR, and SEM-EDX methods. This study evaluated the impacts of various operational parameters such as pH, catalyst dosage, initial TC concentration, and light intensity on TC removal. The findings revealed that under optimal conditions (pH 7, catalyst: 2 g/L, TC: 30 mg/L, and light intensity: 60 mW/cm2), 100% of TC and 84% of TOC were removed within 180 min. The kinetics of TC elimination followed a first-order model. The dominant oxidation species involved in the photocatalytic elimination of TC was found to be ·OH radicals in the TiO2/NP system. The reuse experiments showed the high capability of the catalyst after four consecutive cycles. This study confirmed that the TiO2/NP system has high performance in photocatalytic TC removal under optimized experimental conditions.

Optimizing the performance of Fe-based metal-organic frameworks in photo-Fenton processes: Mechanisms, strategies and prospects

Contaminants in water pose a significant challenge as they are harmful and difficult to treat using conventional methods. Therefore, various new methods have been proposed to degrade organic pollutants in water, among which the photo-Fenton process is considered promising. In recent years, Fe-based metal-organic frameworks (Fe-MOFs) have gained attention and found applications in different fields due to their cost-effectiveness, non-toxic nature, and unique porous structure. Many researchers have applied Fe-MOFs to the photo-Fenton process in recent years and achieved good results. This review focuses on describing different strategies for enhancing the performance of Fe-MOFs in the photo-Fenton process. Also, the mechanism of MOF in the photo-Fenton process is described in detail. Finally, prospects for the application of Fe-MOFs in photo-Fenton systems for the treatment of organic pollutants in water are presented. This study provides information and ideas for researchers to use Fe-MOFs to remove organic pollutants from water by photo-Fenton process.

Characterization of an Iron-Copper Bimetallic Metal-Organic Framework for Adsorption of Methyl Orange in Aqueous Solution

Iron-based organic frame material MIL-53 (Fe) was synthesized by the hydrothermal method with Cu2+ incorporated to obtain bimetallic composite MIL-53 (Fe, Cu). The structure and morphology of the material were characterized by SEM, XRD, BET, FTIR, XPS, and zeta potential. The adsorption performance of MIL-53 (Fe, Cu) on methyl orange was tested under a variety of conditions, including the effects of pH and material dosage, by the static adsorption test. The results show that under the condition of pH = 7, a temperature of 30°C, and an adsorbent dosage of 20 mg, the removal rate of MIL-53 (Fe, Cu) for methyl orange can reach more than 96% within 4 h, and the maximum adsorption capacity after fitting by the thermodynamic model can reach 294.43 mg/g, showing the excellent adsorption performance of MIL-53 (Fe, Cu) on methyl orange. In addition, by exploring the adsorption mechanism of MIL-53 (Fe, Cu) on methyl orange, it is found that the adsorption of MIL-53 (Fe, Cu) on methyl orange depends on chemical adsorption, as evidenced by combining Fe3+ and Cu2+ in the material with methyl orange molecules to form complexes to achieve adsorption. While the specific surface area of the material had no obvious effect on adsorption, the effects of pH, temperature, and concentration were explored. At a pH of 6.5, greater adsorption occurred at higher temperatures, as determined by thermodynamic model fitting, as well as with higher initial methyl orange molecule concentration.

Tuning Band Gap in Fe-Doped g-C3N4 by Zn for Enhanced Fenton-Like Catalytic Performance

Multiple oxidation states of first-row transition-metal cations were always doped in g-C₃N₄ to enhance the catalytic activity by the synergistic action between the cations in the Fenton-like reaction. It remains a challenge for the synergistic mechanism when the stable electronic centrifugation (3d¹⁰) of Zn²⁺ was used. In this work, Zn²⁺ was facilely introduced in Fe-doped g-C₃N₄ (named xFe/yZn-CN). Compared with Fe-CN, the rate constant of the tetracycline hydrochloride (TC) degradation increased from 0.0505 to 0.0662 min^-1 for 4Fe/1Zn-CN. The catalytic performance was more outstanding than those of similar catalysts reported. The catalytic mechanism was proposed. With the introduction of Zn²⁺ in 4Fe/1Zn-CN, the atomic percent of Fe (Fe²⁺ and Fe³⁺) and the molar ratio of Fe²⁺ to Fe³⁺ at the catalyst's surface increased, where Fe²⁺ and Fe³⁺ were the active sites for adsorption and degradation. In addition, the band gap of 4Fe/1Zn-CN decreased, leading to enhanced electron transfer and conversion from Fe³⁺ to Fe²⁺. These changes resulted in the excellent catalytic performance of 4Fe/1Zn-CN. Radicals •OH, •O₂^-, and ¹O₂ formed in the reaction and took different actions under various pH values. 4Fe/1Zn-CN exhibited excellent stability after five cycles under the same conditions. These results may give a strategy for synthesizing Fenton-like catalysts.

The potential application of an efficient MOF-derived visible light-responsive photocatalyst based on Au/C/ZnO for tetracycline antibiotic photodegradation

A series of porous photocatalysts, Au-carbon-doped ZnO (Au/C/ZnO), were synthesized successfully via calcination using MOF-5 as template, with the matrix impregnated with Au nanorods through the seed-mediated method. The catalytic performance was investigated by the photodegradation of tetracycline hydrochloride (TC-HCl). Ninety percent of TC was degraded by Au/C/ZnO sample within 360 min under visible light, showing an efficient photocatalytic activity. The enhanced activity was mainly ascribed to the effect of oxygen vacancies produced by C doping during calcination process of MOF-5 and Au nanorods. The density functional theory (DFT) calculation shows that due to the intermediate energy level, the electron-hole pairs generated by photoelectricity transition were transitioned from valence band (VB) to the intermediate energy level, and further to the conduction band (CB) under irradiation. Thus, the separation efficiency of photogenerated carrier was improved in this process. Meanwhile, the surface plasmon resonance (SPR) and electromagnetic field effect of Au nanorods which were loaded on the C/ZnO promoted the separation efficiency of change carriers, and this process also provided more hot electrons for free radicals generation. This work provides an efficient method for the design and synthesis of noble metal- and non-metal-doped oxide photocatalysts and provides an effective photocatalytic technique for the antibiotic degradation under visible light, which possesses the huge application potential in the environmental purification.

Removal of tetracycline from wastewater using g-C3N4 based photocatalysts: A review

Tetracycline is currently one of the most consumed antibiotics for human therapy, veterinary purpose, and agricultural activities. Tetracycline worldwide consumption is expected to rise by about more than 30% by 2030. The persistence of tetracycline has necessitated implementing and adopting strategies to protect aquatic systems and the environment from noxious pollutants. Here, graphitic carbon nitride-based photocatalytic technology is considered because of higher visible light photocatalytic activity, low cost, and non-toxicity. Thus, this review highlights the recent progress in the photocatalytic degradation of tetracycline using g-C₃N₄-based photocatalysts. Additionally, properties, worldwide consumption, occurrence, and environmental impacts of tetracycline are comprehensively addressed. Studies proved the occurrence of tetracycline in all water matrices across the world with a maximum concentration of 54 μg/L. Among different g-C₃N₄-based materials, heterojunctions exhibited the maximum photocatalytic degradation of 100% with the reusability of 5 cycles. The photocatalytic membranes are found to be feasible due to easiness in recovery and better reusability. Limitations of g-C₃N₄-based wastewater treatment technology and efficient solutions are also emphasized in detail.

Z-scheme CuO/Fe3O4/GO heterojunction photocatalyst: Enhanced photocatalytic performance for elimination of tetracycline

CuO/Fe₃O₄/GO, as a Z-scheme heterojunction catalyst, was successfully synthesized and used as a photocatalyst for removing tetracycline from aqueous solution. The CuO/Fe₃O₄/GO heterogeneous catalyst combines the narrow bandgap semiconductor CuO, oxygen vacancies of Fe₃O₄, and oxygen-containing reaction sites of GO. Without the addition of activators (persulfate or H₂O₂), the photocatalytic performance on decomposing tetracycline is very excellent. Compared with GO, Fe₃O₄, and CuO, CuO/Fe₃O₄/GO exhibits superior photocatalytic performance. Under visible light radiation, CuO/Fe₃O₄/GO generates h⁺ and ⋅O₂^-, which are the mainly responsible active groups for TC degradation. The effects of various pH, catalysts, and reuse on the degradation performance are evaluated, and the optimal conditions for CuO/Fe₃O₄/GO removal of tetracycline are obtained at pH 7, catalyst dosage 20 mg⋅L^-1, TC at a concentration of 30 mg/L, nearly 97.3% of tetracycline is decomposed. This study has great potential in the treatment of wastewater containing various antibiotics.

Fe-O-Zr in MOF for effective photo-Fenton Bisphenol A degradation: Boosting mechanism of electronic transmission

To enhance the efficiency of photogenerated electron transport in the photo-Fenton reaction, we report a Fe-doped UiO-66 containing Fe-O-Zr bonds for the photo-Fenton reaction system. The modulation changes the energy bandgap from 3.89 eV to 2.02 eV, and its absorption edge is red-shifted from the UV region to the visible range. Simultaneously, Fe-O-Zr reduces the redox internal resistance, enhances the photocurrent and catalytic process, and suppresses the compounding of photogenerated electrons and holes. These promote the valence cycling of Fe(III)/Fe(II) in the photo-Fenton reaction. Compared with UiO-66, the hydroxyl radical generation efficiency of this reaction system was increased by 5.8 times (UiO-66: 0.0009 mM/min, FeUiO-1: 0.0053 mM/min). The degradation efficiency of BPA was increased by 100.8 times (UiO-66: 0.0012 min^-1, FeUiO-1: 0.121 min^-1), and the removal rate of TOC also reached 69.55%. The removal rate of BPA was maintained at more than 85% through 5 cycles. The reaction system was able to maintain a removal rate more than 97% at pH:3-9. In the presence of anions, such as Cl^-, SO₄^2-, NO₃^2- (10 mM), the degradation rates of BPA were still above 94%. The catalytic efficiency was 2.02 times higher under natural light than relative to dark conditions. It was demonstrated by EPR and inhibition experiments that the main active species in the reaction were hydroxyl radicals and vacancies. The HOMO energy level and LUMO energy level of the intermediates were analyzed, and the possible degradation pathways of the active species were speculated. Evaluation of the biological toxicity of intermediates demonstrated that the system can effectively detoxify BPA. This investigation provides a reference method to enhance the efficiency of the photo-Fenton reaction of MOFs.