Treatment of polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions by flotation using colloidal gas aphrons

Soluble natural sweetener from date palm (Phoenix dactylifera L.) extract using colloidal gas aphrons generated with a food-grade non-ionic surfactant

Date palm (Phoenix dactylifera L.) is the most commonly cultivated fruit tree in the Middle East and North Africa. Date fruits are an excellent source of nutrition due to their high sugar content and high levels of phenols, minerals, and antioxidants. This work aimed to prepare a soluble natural sweetener from date fruit extract using colloidal gas aprons (CGAs) generated with a food-grade non-ionic surfactant (Tween 20). Various process parameters, such as the flow rate of the CGAs, the volume of the feed, the temperature of the CGAs, and the feed solution, were varied to obtain the optimal parameters. In the foam phase, the maximum soluble sugar enrichment of 92% was obtained at a flow rate of 50 mL/min of CGA and a solution temperature of 23 °C. The formation of intermolecular hydrogen bonding between the glucose molecules and the surfactant Tween 20 was confirmed by molecular modeling studies.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05907-9.

Cleaning Oily Sludge Using Colloidal Gas Aphrons: Optimizing Process Conditions and Analyzing Mechanisms

Colloidal gas aphrons (CGAs) are applied in pollutant removal due to their large specific surface area and high surface activity. The structure and properties of the prepared CGAs were investigated in the process of oil removal from oily sludge. The prepared CGAs had a liquid film thickness was 5-10 μm with high stability. CGA interfacial tension was as low as 3.157 mN/m. Then it was found that the oil removal rate of CGAs was higher than that of chemical treatments, showing that CGAs could increase the mass transfer surface area and provide additional attachment sites for pollutants, enhancing the oil removal. The treatment conditions of the oil removal were optimized through response surfaces, showing that under optimal treatment conditions, the oil removal rate of oily sludge reached 96.07%. Additionally, the interaction between surfactant concentration and temperature was the most significant of all of the influencing factors. The behavior and mechanism of CGAs in the cleaning process of oily sludge were further investigated using an inverted fluorescence microscope, SEM, FTIR, and two-dimensional fluorescence spectrometer, showing that pollutants transferred from the liquid film surface of CGAs to the inside the film, and CGAs could specifically adsorb negatively charged organic compounds and aromatic hydrocarbons. The results show that CGAs achieved liquid membrane solubilization. Many negatively charged organic compounds and aromatic hydrocarbons are adsorbed onto the CGAs liquid membrane surface via electrostatic and hydrophobic interactions and then migrated to the hydrophobic layer of the CGAs liquid membrane due to the distribution effect, thus enabling rapid pollutant migration between solid and liquid phases.

Application and development of foam extraction technology in wastewater treatment: A review

With the advancement of technology, wastewater treatment has become a significant challenge limiting the clean and sustainable development of chemical and metallurgical industries. Foam extraction, based on interfacial separation and mineral flotation, has garnered considerable attention as a wastewater treatment technology due to its unique physicochemical properties. Although considerable excellent accomplishments were reported, there still lacks a comprehensive summary of process features and contaminant removal mechanisms via foam extraction. According to the latest research progresses, the principles and characteristics of foam extraction technology, the classification and application of flotation reagents are systematically summarized in this work. Then comprehensively commented on the application fields and prospects of iterative flotation technology such as ion flotation, adsorption flotation and floating-extraction. The shortcomings and limitations of the current foam extraction technologies were discussed, and the feasible process intensification techniques were highlighted. This review aims to enchance the understanding of the foam extraction mechanism, and provides guidance for the selection appropriate reagents and foam extraction technologies in wastewater treatment.

Colloidal gas aphrons for biotechnology applications: a mini review

Colloidal gas aphrons (CGAs) are highly stable, spherical, micrometer-sized bubbles encapsulated by surfactant multilayers. They have several intriguing properties, including: high stability, large interfacial area, and the ability to maintain the same charge as their parent molecules. The physical properties of CGAs make them ideal for biotechnological applications such as the recovery of a variety of: biomolecules, particularly proteins, yeast, enzymes, and microalgae. In this review, the bio-application of CGAs for the recovery of natural components is presented, as well as: experimental results, technical challenges, and critical research directions for the future. Experimental results from the literature showed that the recovery of biomolecules was mainly determined by electrostatic or hydrophobic interactions between polyphenols and proteins (lysozyme, β-casein, β-lactoglobulin, etc.), yeast, biological molecules (gallic acid and norbixin), and microalgae with CGAs. Knowledge transfer is essential for commercializing CGA-based bio-product recovery, which will be recognized as a viable technology in the future.

A novel method for the separation of saponin from soybean meal by colloidal gas aphrons: optimization based on response surface methodology

Natural surfactants, such as soy saponins, are rich in triterpenoid saponins, which have significant biological activities and are used in different applications, such as cosmetics, food, and pharmaceutical industries. In this research, it was used colloidal gas aphrons (CGAs) as a green and cost-effective method to concentrate soy saponin from soybean meal extract. The production of micro-nano bubbles, in conjunction with the investigation of the effect of different chemical and process variables, significantly impacted the purity and recovery of saponins in this method. The response surface methodology (RSM) was employed to optimize the process. The purity and recovery percentage of saponins were found to be 75.12 and 25.87 in optimal conditions, respectively. Furthermore, when the maximum value for both responses was selected, the purity and recovery reached 57.61% and 71.94%, respectively. Eventually, the results indicate that this method is technically promising, straightforward, and cost-effective in separating saponins for various applications.

Rhamnolipid-Enhanced ZVI-Activated Sodium Persulfate Remediation of Pyrene-Contaminated Soil

In soil, polycyclic aromatic hydrocarbons (PAHs) are tightly bound to organic components, but surfactants can effectively transform them from a solid to a liquid phase. In this study, the biosurfactant rhamnolipid (RL) was selected as the eluent; shaking elution in a thermostatic oscillator improved the elution rate of pyrene, and the effects of RL concentration, temperature, and elution time on the elution effect were compared. After four repeated washings, the maximum elution rate was 75.6% at a rhamnolipid concentration of 20 g/L and a temperature of 45 °C. We found that 38 μm Zero-Valent Iron (ZVI) had a higher primary reaction rate (0.042 h^-1), with a degradation rate of 94.5% when 3 g/L ZVI was added to 21 mM Na₂S₂O₈ at 60 °C. Finally, electron paramagnetic resonance (EPR) detected DMPO-OH and DMPO-SO₄ signals, which played a major role in the degradation of pyrene. Overall, these results show that the combination of rhamnolipid elution and persulfate oxidation system effectively remediated pyrene-contaminated soil and provides some implications for the combined remediation with biosurfactants and chemical oxidation.