Catalytic degradation of tetracycline using peroxymonosulfate activated by cobalt and iron co-loaded pomelo peel biochar nanocomposite: Characterization, performance and reaction mechanism

Mesoporous cobalt-manganese layered double hydroxides promote the activation of calcium sulfite for degradation and detoxification of metronidazole

Metronidazole (MNZ), a commonly used antibiotic, poses risks to water bodies and human health due to its potential carcinogenic, mutagenic, and genotoxic effects. In this study, mesoporous cobalt-manganese layered double hydroxides (CoxMny-LDH) with abundant oxygen vacancies (Ov) were successfully synthesized using the co-precipitation method and used to activate calcium sulfite (CaSO3) with slight soluble in water for MNZ degradation. The characterization results revealed that Co2Mn-LDH had higher specific areas and exhibited good crystallinity. Co2Mn-LDH/CaSO3 exhibited the best catalytic performance under optimal conditions, achieving a remarkable MNZ degradation efficiency of up to 98.1 % in only 8 min. Quenching experiments and electron paramagnetic resonance (EPR) tests showed that SO4•- and 1O2 played pivotal roles in the MNZ degradation process by activated CaSO3, while the redox cycles of Co2+/Co3+ and Mn3+/Mn4+ on the catalyst surface accelerated electron transfer, promoting radical generation. Three MNZ degradation routes were put forward based on the density functional theory (DFT) and liquid chromatography-mass spectrometer (LC-MS) analysis. Meanwhile, the toxicity analysis result demonstrated that the toxicity of intermediates post-catalytic reaction was decreased. Furthermore, the Co2Mn-LDH/CaSO3 system displayed excellent stability, reusability, and anti-interference capability, and achieved a comparably high removal efficiency across various organic pollutant water bodies. This study provides valuable insights into the development and optimization of effective heterogeneous catalysts for treating antibiotic-contaminated wastewater.

Biochar-based functional materials for the abatement of emerging pollutants from aquatic matrices

Biochar has emerged as a versatile and efficient multi-functional material, serving as both an adsorbent and catalyst in removing emerging pollutants (EPs) from aquatic matrices. However, pristine biochar's catalytic and adsorption capabilities are hindered by its poor surface functionality and small pore size. Addressing these limitations involves the development of functionalized biochar, a strategic approach aimed at enhancing its physicochemical properties and improving adsorption and catalytic efficiencies. Despite a growing interest in this field, there is a notable gap in existing literature, with no review explicitly concentrating on the efficacy of biochar-based functional materials (BCFMs) for removing EPs in aquatic environments. This comprehensive review aims to fill this void by delving into the engineering considerations essential for designing BCFMs with enhanced physiochemical properties. The focus extends to understanding the treatment efficiency of EPs through mechanisms such as adsorption or catalytic degradation. The review systematically outlines the underlying mechanisms involved in the adsorption and catalytic degradation of EPs by BCFMs. By shedding light on the prospects of BCFMs as a promising multi-functional material, the review underscores the imperative for sustained research efforts. It emphasizes the need for continued exploration into the practical implications of BCFMs, especially under environmentally relevant pollutant concentrations. This holistic approach seeks to contribute to advancing knowledge and applying biochar-based solutions in addressing the challenges posed by emerging pollutants in aquatic ecosystems.

A new strategy to construct MOF-on-MOF derivatives for the removal of tetracycline hydrochloride from water by activation of peroxymonosulfate

A MOF-on-MOF composite derivative material named ZIF-67@Ce-MOF-600 was designed and synthesized. The preparation of ZIF-67@Ce-MOF-600 was optimized from the aspects of the ratio of metal and ligand, heat-treatment temperature. It was demonstrated by XRD, FT-IR, SEM-EDS and TEM. The optimum conditions for the activation of PMS by ZIF-67@Ce-MOF-600 for the degradation of tetracycline (TC) were investigated by adjusting the catalyst dosage, TC, pH, peoxymonosulfate (PMS) concentration, and different kinds of water, co-existing anions and pollution. Under optimal conditions (20 mg catalysts and 50 mg PMS added) in 100 mL of tetracyclines (TC) solvent (20 mg TC/L), the removal rate could reach up to 99.2% and after five cycles was 70.5%. The EPR results indicated the presence of free radicals and non-free radical, among which free radicals intended to play a major role in the degradation process. Its possible degradation pathways and attack sites were analyzed by liquid-phase mass spectrometry and DFT analysis.

A one-stone-two-birds strategy for cellulose dissolution, regeneration, and functionalization as a photocatalytic composite membrane for wastewater purification

Photocatalytic membranes integrate membrane separation and photocatalysis to deliver an efficient solution for water purification, while the top priority is to exploit simple, efficient, renewable, and low-cost photocatalytic membrane materials. We herein propose a facile one-stone-two-birds strategy to construct a multifunctional regenerated cellulose composite membrane decorated by Prussian blue analogue (ZnPBA) microspheres for wastewater purification. The hypotheses are that: 1) ZnCl2 not only serves as a cellulose solvent for tuning cellulose dissolution and regeneration, but also functions as a precursor for in-situ growth of spherical-like ZnPBA; 2) More homogeneous reactions including coordination and hydrogen bonding among Zn2+, [Fe(CN)6]3- and cellulose chains contribute to a rapid and uniform anchoring of ZnPBA microspheres on the regenerated cellulose fibrils (RCFs). Consequently, the resultant ZnPBA/RCM features a high loading of ZnPBA (65.3 wt%) and exhibits excellent treatment efficiency and reusability in terms of photocatalytic degradation of tetracycline (TC) (90.3 % removal efficiency and 54.3 % of mineralization), oil-water separation efficiency (>97.8 % for varying oils) and antibacterial performance (99.4 % for E. coli and 99.2 % for S. aureus). This work paves a simple and useful way for exploiting cellulose-based functional materials for efficient wastewater purification.

Peroxymonosulfate activation by iron-cobalt bimetallic phosphide modified nickel foam for efficient dye degradation

Novel catalysts with multiple active sites and rapid separation are required to effectively activate peroxymonosulfate (PMS) for the removal of organic pollutants from water. Therefore, an integrated catalyst for PMS activation was developed by directly forming Co-Fe Prussian blue analogs on a three-dimensional porous nickel foam (NF), which were subsequently phosphorylated to obtain cobalt-iron bimetallic phosphide (FeCoP@NF). The FeCoP@NF/PMS system efficiently degraded dye wastewater within 20 min. The system exhibited excellent catalytic degradation over a broad pH range and at high dye concentrations due to the presence of unique asymmetrically charged Coa+ and Pb- dual active sites formed by cobalt phosphides within FeCoP@NF. These active sites significantly enhanced the catalytic activity of PMS. The activation mechanism of PMS involves phosphorylation that accelerates electron transfer from FeCoP@NF to PMS, to generate SO4·-, ·OH, O2·-, and 1O2 active species. Three-dimensional FeCoP@NF could be readily recycled and showed good stability for PMS activation. In this study, a highly efficient, stable, and readily recyclable integrated catalyst was developed. This catalyst system effectively resolves the separation and recovery issues associated with conventional powder catalysts and has a wide range of potential applications in wastewater treatment.

Activating peroxymonosulfate with Fe-doped biochar for efficient removal of tetracycline: Dual action of reactive oxygen species and electron transfer

If pharmaceutical wastewater is not managed effectively, the presence of residual antibiotics will result in significant environmental contamination. In addition, inadequate utilization of agricultural waste represents a squandering of resources. The objective of this research was to assess the efficacy of iron-doped biochar (Fe-BC) derived from peanut shells in degrading high concentrations of Tetracycline (TC) wastewater through activated peroxymonosulfate. Fe-BC demonstrated significant efficacy, achieving a removal efficiency of 87.5% for TC within 60 min without the need to adjust the initial pH (20 mg/L TC, 2 mM PMS, 0.5 g/L catalyst). The degradation mechanism of TC in this system involved a dual action, namely Reactive Oxygen Species (ROS) and electron transfer. The primary active sites were the Fe species, which facilitated the generation of SO4•-, •OH, O2•-, and 1O2. The presence of Fe species and the C=C structure in the Fe-BC catalyst support the electron transfer. Degradation pathways were elucidated through the identification of intermediate products and calculation of the Fukui index. The Toxicity Estimator Software Tool (T.E.S.T.) suggested that the intermediates exhibited lower levels of toxicity. Furthermore, the system exhibited exceptional capabilities in real water and circulation experiments, offering significant economic advantages. This investigation provides an efficient strategy for resource recycling and the treatment of high-concentration antibiotic wastewater.

3D electro-Fenton augmented with iron-biochar particle electrodes derived from waste iron bottle caps and sugarcane bagasse for the remediation of sodium dodecyl sulphate

The present work demonstrates a novel strategy of synthesizing iron-biochar (Fe@BCSB) composite made with the waste iron bottle cap and sugar cane bagasse for implementation in the three-dimensional electro-Fenton (3DEF) process. The catalytic ability of the Fe@BCSB composite was explored to remediate the sodium dodecyl sulphate (SDS) surfactant from wastewater at neutral pH. At the optimum operating condition of Fe@BCSB dose of 1.0 g L-1, current density of 4.66 mA cm-2, and Na2SO4 dose of 50 mM, nearly 92.7 ± 3.1% of 20 mg L-1 of SDS abatement was attained during 120 min of electrolysis time. Moreover, the Fe@BCSB showed significant recyclability up to six cycles. Besides, other organics were successfully treated with more than 85% abatement efficiency in the proposed Fe@BCSB-supported 3DEF process. The total operating cost obtained during SDS treatment was around 0.31 US$ m-3 of wastewater. The phytotoxicity test revealed the positive impact of the 3DEF-treated effluent on the germination of the Vigna radiata. The electron paramagnetic resonance conveyed •OH as the prevailing reactive species for the oxidation of SDS in the 3DEF process. Further, about 81.3 ± 3.8% of SDS and 53.7 ± 4.1% of mineralization efficacy were acquired from the real institutional sewage.

Sulfur-doped α-Fe2O3 as an efficient and recycled peroxydisulfate activator toward organic pollutant degradation: performance and mechanism

Sulfur (S)-doped α-Fe2O3 has been regarded as an excellent catalyst for eliminating organic pollutants in the photo-Fenton-like reaction. Yet, the synthetic complexity and extremely low activity in the dark Fenton-like reaction still need to be solved. In this study, magnetic α-Fe2O3 with sulfide was successfully fabricated via hydrothermal and calcination processes, for the first time, where thiourea acted as both S source and reducing agent, and then, it was applied for activating peroxydisulfate (PDS) to degrade organic contaminants. Important influencing factors were systemically investigated, and the results showed that this catalyst activating PDS was highly effective in the removal of organic pollutants in dark- and photo-Fenton-like reactions. In addition, the catalyst possessed good stability and recyclable ability. The structure of catalyst was analyzed by several characterizations, such as XRD and XPS. The results revealed that sulfide had an important effect on the structure and performance of α-Fe2O3. The detected mechanism indicated that the main reactive oxygen species were altered after switching from darkness to LED illumination. This work offered a promising method to rationally design for S/α-Fe2O3 in the environmental remediation.

Rapid degradation and detoxification of metronidazole using calcium sulfite activated by CoCu two-dimensional layered bimetallic hydroxides: Performance, mechanism, and degradation pathway

In this study, cobalt copper-layered double hydroxides (CoCu-LDHs) were prepared by coprecipitation as catalysts to activate CaSO3 for metronidazole (MNZ) degradation. This is the first report on layered double hydroxides activating sulfite for the degradation of organic pollutants. Meanwhile, to address the issue of self-quenching reactions readily occurring in conventional sulfite advanced oxidation systems and resulting in low oxidant efficiency, CaSO3 with slightly soluble in water was used instead of commonly used Na2SO3, to improve the limitations of traditional systems. The results showed that in the CoCu-LDHs/CaSO3 system, the degradation rate of MNZ reached 98.7% within 5 min, representing a 23.0% increase compared to the CoCu-LDHs/Na2SO3 system. Owing to the excellent catalytic performance exhibited by CoCu-LDHs, characterizations including XRD, FTIR, SEM, TEM, BET and XPS were carried out to investigate this further. The results confirmed the successful synthesis of CoCu-LDH, and the activation mechanism study revealed that Co and Cu were considered to the main elements in activating CaSO3, demonstrating good synergistic effects. In addition, the oxygen vacancies on the catalyst surface also played a positive role in generating radicals and promoting electron transfer. Subsequently, the effects of Co/Cu ratio, catalyst dosage, oxidant concentration, pollutant concentration, pH and coexisting substances on MNZ degradation were investigated. Additionally, based on the LC-MS analysis of degradation products and toxicity tests, MNZ was transformed into different intermediates with low toxicity through four pathways, eventually mineralizing into inorganic small molecules. After six cycles, the MNZ degradation rate still reached 82.1%, exhibiting excellent stability and recyclability. In general, this study provides new ideas for activating sulfite, while providing theoretical support for subsequent research on sulfite advanced oxidation system.

Piezoelectricity ameliorates high-valent iron oxo species production in peroxymonosulfate activation for refractory atrazine remediation

Over the past few years, high-valent iron oxo species (Fe(IV)) have shown considerable promise. However, an improved solution is needed for the bottleneck of unsatisfactory electron transfer efficiency in Fe-based catalyst/PMS systems. In this study, Enteromorpha-derived biochar was pyrolyzed with iron and barium titanate (FeBCBa). Under ultrasonic treatment, it removes 94.5% of atrazine (10 mg/L) within 60 min, and is environmentally friendly. BaTiO3's piezoelectricity enhances Fe(IV) production in FeBCBa, resulting in superior performance. In the ultrasonic condition, the apparent reaction rate was 1.42 times higher than in the non-ultrasonic condition. Using density functional theory calculations, it can be shown that due to the Fe dopant, electrons in ATZ's LUMO are more easily transferred to the catalyst's HOMO, which is beneficial for ATZ removal. The results of this study provide new guidance for constructing stable and efficient catalysts for environmental remediation.

Regulation of tourmaline-mediated Fenton-like system by biochar: Free radical pathway to non-free radical pathway

The heterogeneous Fenton-like systems induced by Fe-containing minerals have been largely applied for the degradation of organic pollutants. However, few studies have been conducted on biochar (BC) as an additive to Fenton-like systems mediated by iron-containing minerals. In this study, the addition of BC prepared at different temperatures was found to significantly enhance the degradation of contaminants in the tourmaline-mediated Fenton-like system (TM/H2O2) using Rhodamine B (RhB) as the target contaminant. Furthermore, the hydrochloric acid-modified BC prepared at 700 °C (BC700(HCl)) could achieve complete degradation of high concentrations of RhB in the BC700(HCl)/TM/H2O2 system. Free radical quenching experiments showed that TM/H2O2 system removed contaminants mainly mediated by the free radical pathway. After adding BC, the removal of contaminants is mainly mediated by the non-free radical pathway in BC700(HCl)/TM/H2O2 system which was confirmed by the Electron paramagnetic resonance (EPR) experiments and electrochemical impedance spectroscopy (EIS). In addition, BC700(HCl) had broad feasibility in the degradation of other organic pollutants (Methylene Blue (MB) 100%, Methyl Orange (MO) 100%, and tetracycline (TC) 91.47%) in the tourmaline-mediated Fenton-like system. Possible pathways for the degradation of RhB by the BC700(HCl)/TM/H2O2 system were also proposed.

Bamboo charcoal fiber bundles loaded MOF-derived magnetic Co/CoO porous polyhedron for efficiently catalytic degradation of tetracyclines hydrochloride

The health of living things and the ecosystem of the planet have both been negatively impacted by antibiotic residue in the water environment. There has been a lot of interest in the catalyst made of metal-carbon compounds from MOFs as a potential solution for activating peroxymonosulfate (PMS) to produce reactive oxygen species to catalyze the degradation of residual antibiotics. In this study, zeolitic imidazolate frameworks (ZIF-67) on bamboo fiber bundles (BFB) were pyrolyzed to produce magnetic Co/CoO nanoparticles with porous polyhedrons mounted on bamboo charcoal fiber bundles (BCFB)(BCFB@PCo/CoO). Specific surface area of obtained BCFB@PCo/CoO with abundant active sites arrives at 302.41 m2/g. The catalytic degradation efficiency of Tetracycline hydrochloride (TCH), a target contaminant, could reach up to 99.94% within 15 minutes (PMS = 0.4g/L, Cat. = 0.2g/L). The effects of potential factors, including PMS dosage, interference ions, and temperature, on catalytic degradation efficiencies were investigated. Magnetic recovery and antimicrobial properties of the BCFB@PCo/CoO were also evaluated and the possible degradation pathways were explored. Catalytic mechanism explorations of BCFB@PCo/CoO/PMS system reveal MOF-derived magnetic Co/CoO nanoparticles embedded in BCFB promote the synergistic interaction of both radicals and non-radical pathways for catalytic degradation of TCH. The novel BCFB@PCo/CoO provides an alternative to deal with wastewater containing antibiotics.

A novel Ce-Ni@biochar nanocomposite with enhanced photocatalytic activity towards organic dyes degradation: impact of process variables and water matrices

The intent of this research work is to implement a biogenic, affordable, and highly effective Ce-Ni@biochar catalyst in order to study its photoactivity in the removal of crystal violet and malachite green oxalate. The catalyst was synthesized using liquid phase reduction method where cerium and nickel nanoparticles are embedded on the rice husk biochar for photocatalytic degradation of organic dyes in the presence of sunshine. Various characterization techniques were conducted on fabricated catalyst for adequate evaluation of the chemical composition as well as morphological and topographical properties of the formed compound. The nanoparticles embedded on biochar persuade increased charge separation that resulted in a substantial decrease in electron-hole recombination rate. The synergistic actions of the catalyst resulted in a high level of photocatalytic activity. The fabricated nanocatalyst showed excellent photoactivity that caused 96 and 99% degradation of crystal violet and malachite green oxalate, a growing industrial pollutant, within 35 and 25 min, respectively. A persuasive mechanism and kinetics are well presented. A series of investigations were done on other factors, such as contact duration, catalyst dosage, starting concentration, interfering ions, and pH, to know its degradation pursuance. The impacts of different water matrices were also investigated. The removal effectiveness of the synthesized catalyst persisted after five consecutive cycles. Marking the burgeoning industrial effluents as a result of rapid industrialization and also focusing on easy availability and low-cost source as well as high efficiency, reusability of the catalyst imparts its novelty and need of this research work.

Silica enhanced activation and stability of Fe/Mn decorated sludge biochar composite for tetracycline degradation

In this study, SiO₂-composited biochar decorated with Fe/Mn was prepared by co-pyrolysis method. The degradation performance of the catalyst was evaluated by activating persulfate (PS) to degrade tetracycline (TC). The effects of pH, initial TC concentration, PS concentration, catalyst dosage and coexisting anions on degradation efficiency and kinetics of TC were investigated. Under optimal conditions (TC = 40 mg L^-1, pH = 6.2, PS = 3.0 mM, catalyst = 0.1 g L^-1), the kinetic reaction rate constant could reach 0.0264 min^-1 in Fe₂Mn₁@BC-0.3SiO₂/PS system, which was 12 times higher than that in the BC/PS system (0.00201 min^-1). The electrochemical, X-ray diffractometer (XRD), Fourier transform infrared spectrum (FT-IR) and X-ray photoelectron spectroscopy (XPS) analysis showed that both metal oxides and oxygen-containing functional groups provide more active sites to activate PS. The redox cycle between Fe(II)/Fe(III) and Mn(II)/Mn(III)/Mn(IV) accelerated the electron transfer and sustained the catalytic activation of PS. Radical quenching experiments and electron spin resonance (ESR) measurements confirmed that surface sulfate radical (SO₄^•-) play a key role in TC degradation. Three possible degradation pathways of TC were proposed based on high-performance liquid chromatography coupled with high-resolution mass spectrometry (HPLC-HRMS) analysis, the toxicity of TC and its intermediates was analyzed by bioluminescence inhibition test. In addition to the enhanced catalytic performance, the presence of silica also improved the stability of the catalyst, as confirmed by cyclic experiment and metal ion leaching analysis. The Fe₂Mn₁@BC-0.3SiO₂ catalyst, derived from low-cost metals and bio-waste materials, offer an environmentally friendly option to design and implement heterogenous catalyst system for pollutant removal in water.

Degradation of tetracycline by peroxymonosulfate activated with Mn0.85Fe2.15O4-CNTs: Key role of singlet oxygen

Tetracycline (TC) is a kind of electron-rich organic, and singlet oxygen (¹O₂) oxidative pathway-based advanced oxidation processes (AOPs) have represented outstanding selective degradation to such pollutants. In this paper, an excellent prepared strategy for ¹O₂ dominated catalyst was adopted. A catalyst composed of non-stoichiometric doping Mn-Fe bimetallic oxide supported on CNTs (0.3-Mn_0.85Fe_2.15O₄-CNTs) was synthesized and optimized by regulating the non-stoichiometric doping ratio of Mn & Fe and the loading amount of CNTs. Through optimization and control experiments, the optimized catalyst represented 94.9% of TC removal efficiency within 60 min in neutral condition under relatively low concentrations of Mn_0.85Fe_2.15O₄-CNTs (0.4 g/L) and PMS (0.8 mM). Through SEM and XRD characterization, Mn_0.85Fe_2.15O₄-CNTs was a hybrid of cubic Mn_0.85Fe_2.15O₄ uniformly dispersing on CNTs. By the characterization of XPS and FT-IR, more CO bonds and low-valent Mn (II) & Fe (II) appeared in Mn_0.85Fe_2.15O₄-CNTs. Reactive oxygen species (ROS) was determined by radical quenching experiments and electron spin resonance (EPR) spectroscopy, and ¹O₂ was verified to be the dominated ROS. The mechanism for PMS' activation was speculated, and more low-valent Mn (II) and Fe (II) contributed to the production of free-radical (•OH & SO₄^•-), while the reaction between PMS and the enhanced CO bond on Mn_0.85Fe_2.15O₄-CNTs played a crucial part in the generation of ¹O₂. In addition, through the comparative degradation of four different organics with distinct charge densities, the excellent selectivity of ¹O₂-based oxidative pathway to electron-rich pollutants was found. This paper supplied a good strategy to prepare catalyst for PMS activation to form a ¹O₂-dominated oxidative pathway.

Activation of peroxymonosulfate with cobalt embedded in layered δ-MnO2 for degradation of dimethyl phthalate: Mechanisms, degradation pathway, and DFT calculation

The sulfate radical-based advanced oxidation processes (SR-AOPs) offer huge potential for the removal of organic pollutants. In this study, Co(II)-intercalated δ-MnO₂ (Co-δ-MnO₂) catalyst was successfully prepared by a simple cation exchange reaction. The obtained Co-δ-MnO₂ exhibited high catalytic performance for the removal of dimethyl phthalate (DMP) under the activation of peroxymonosulfate (PMS), with the degradation efficiency reaching 100% within 6 h. Experiments and theoretical calculations revealed that interlayer Co(II) provided unique active sites in Co-δ-MnO₂. In addition, radical and non-radical pathways were confirmed to play a role in Co-δ-MnO₂/PMS system. ^•OH, SO₄^{• ̶}, and ¹O₂ were identified to be the dominating reactive species in Co-δ-MnO₂/PMS system. This study provided new insights into the design of catalysts and laid a foundation for developing modifiable layered heterogeneous catalysts.

Shaddock peels derived multilayer biochar with embedded CoO@Co nanoparticles for peroxymonosulfate based wastewater treatment

The utilization of bio-wastes, such as shaddock peels, is of great significance for sustainable development. Combined with the potential of peroxymonosulfate (PMS) based advanced oxidation process (AOP) in wastewater treatment, a highly efficient functional catalyst, derived from shaddock peels biochar (SPC) and embedded with CoO@Co nanoparticles, i.e. Co-SPC-x(y), was prepared using a facile impregnation-calcination method and used for refractory organics degradation with PMS. The decoration amount of Co and annealing temperature were optimized, and the effects of various reaction factors were investigated. The results indicated that the optimized sample of Co-SPC-10 (900) consisted of multilayer biochar with curly edges and highly dispersed CoO@Co nanoparticles in the range of 20-200 nm, which is in cubic metallic Co and CoO. Moreover, it also possessed a specific surface area of 248.6 m²/g, and exhibited excellent PMS activation ability with ∼100% chlortetracycline hydrochloride (CTC) removal ratio within only 12 min of operation. The Co-SPC-10 (900)/PMS system showed relatively high tolerance for HPO₄^2-, NO₃^- and SO₄^2-, while the Cl^- and HA had considerable effects on it. Mechanism exploration results revealed that both radical and non-radical pathways existed in the Co-SPC-10 (900)/PMS system, in which the multilayered biochar functioned as an electron transfer carrier to facilitate the continuous cycle of Co²⁺/Co³⁺ in the CoO@Co nanoparticles by reacting with the absorbed CTC and PMS, resulting in the production of •OH, SO₄^•-, O₂^•- and ¹O₂. Additionally, the Co-SPC-10 (900) also showed good stability and catalytic oxidation performance for various refractory organics.

Algae-derived metal-free boron-doped biochar acts as a catalyst for the activation of peroxymonosulfate toward the degradation of diclofenac

In this study, plain seaweed biochar (SW) and boron-doped seaweed biochar (BSW) were prepared through a simple pyrolysis process using Undaria pinnatifida (algae biomass) and boric acid. The BSW catalyst was utilized to degrade organic pollutants in aqueous environments by activating peroxymonosulfate (PMS). Surface characterization of the BSW demonstrated successful doping of boron into the biochar materials. BSW₆₀₀ exhibited greater catalytic activity than SW₆₀₀, as evidenced by the former's maximum adsorption capacity of diclofenac (DCF) onto BSW₆₀₀ (q_max = 30.01 mg g^-1) and the activation of PMS. Complete degradation of DCF was achieved in 30 min using 100 mg L^-1 BSW₆₀₀, 0.5 mM PMS, and 6.5 initial solution pH as critical parameters. The pseudo-first-order kinetic model accurately described the DCF degradation kinetics. The scavenger experiment displayed that radical and non-radical reactive oxygen species (ROS) formed in the BSW₆₀₀/PMS system. Furthermore, the generation of ROS in the BSW₆₀₀/PMS system was confirmed by electron spin resonance spectroscopy (ESR). The percentage contribution of ROS was assessed to be 10, 65, and 25% for HO^•, SO₄^•-, and ¹O₂, respectively. Additionally, the electron transfer pathway was also confirmed by electrochemical analysis. Moreover, the influence of water matrics on the BSW₆₀₀/PMS system was demonstrated. The co-existence of anions and humic acid (HA) did not affect the catalytic activity of the BSW₆₀₀/PMS system. The recyclability of BSW₆₀₀ was assessed by DCF removal (86.3%) after three cycles. Ecological structure-activity relationships software was used to assess by-product toxicity. This study demonstrates the efficacy of non-metallic heteroatom-doped biochar materials as eco-friendly catalysts in groundwater applications.

Engineered ball-milled colloidal activated carbon material for advanced oxidation process of ibuprofen: Influencing factors and insights into the mechanism

This study explores a simple and efficient, physically modified ball-milled activated carbon (AC_BM) preparation from granular activated carbon (GAC), which can be demonstrated for groundwater application. The colloidal stability of the AC_BM plays a vital role in the activation of peroxymonosulfate (PMS) and the degradation of pollutants. Adsorption kinetics and isotherm studies explain that the AC_BM has more active sites and maximum adsorption capacity (q_max = 509 mg g^-1) on the surface of the materials than GAC. The 92% of ibuprofen degradation was achieved at 240 min along with 0.1 g L^-1 of AC_BM, 5 mM of PMS, and 6.3 of initial solution pH. A chemical scavenger and electron spin resonance spectra also confirmed the formation of reactive oxygen species such as radicals (O₂^•-, HO^•, SO₄^•-) and non-radical (¹O₂) in the AC_BM/PMS system. Three major degradation pathways, hydroxylation, demethylation, and decarboxylation involved in ibuprofen degradation. Nearly 13 degradation by-products were detected during the AC_BM/PMS oxidation of ibuprofen. The toxicity analysis of oxidation by-products of ibuprofen was also discussed by computational simulation employing the ecological structure-activity relationships software. The AC_BM/PMS system was successfully applied to the natural groundwater system for ibuprofen degradation. Hence, the AC_BM/PMS system is an excellent catalyst for real groundwater applications.

Rape Straw Supported FeS Nanoparticles with Encapsulated Structure as Peroxymonosulfate and Hydrogen Peroxide Activators for Enhanced Oxytetracycline Degradation

Iron-based catalysts with high load content of iron sulfide (FeS) were commonly peroxymonosulfate (PMS) and hydrogen peroxide (H₂O₂) activators to degrade organic pollutants but limited catalytic efficiency and increased risk of ferrous ion leaching restricted their use. Meanwhile, various biomass materials such as straw, peel, and branch have been extensively prepared into biochar for mechanical support for iron-based catalysts; however, the preparation process of biochar was energy-intensive. In this study, FeS nanoparticles modified rape straw composites (RS-FeS) encapsulated with ethylenediaminetetraacetic acid (RS-EDTA-FeS) were successfully presented by in-situ synthesis method for efficiently activating PMS and H₂O₂ to degrade oxytetracycline (OTC), which was economical and environmentally friendly. The results showed that the modified rape straw can remove OTC efficiently, and the addition of EDTA also significantly enhanced the stability and the reusability of the catalyst. In addition, EDTA also promoted the activation of H₂O₂ at neutral pH. The OTC degradation efficiency of the two catalysts by PMS was faster than that of H₂O₂, but H₂O₂ had a stronger ability to remove OTC than PMS. The highest OTC removal efficiency of RS-FeS and RS-EDTA-FeS were 87.51 and 81.15%. O₂^•- and ¹O₂ were the major reactive oxidative species (ROS) in the PMS system. Furthermore, compared with RS-FeS, the addition of EDTA inhabited the generation of O₂^•- in the PMS system. Instead, O₂^•- and ^•OH were the major ROS in the H₂O₂ system, but ¹O₂ was also identified in RS-FeS/H₂O₂ system. RS-EDTA-FeS showed a trend of rising first and then decreasing in recycle test. Instead, the removal rate of OTC by RS-FeS decreased significantly with the increase in reuse times. In the actual wastewater test, the TOC removal of two catalysts active by H₂O₂ was better than PMS, which was consistent with the test results of OTC, indicating that the two catalysts have application value in the removal of organic pollutants in actual wastewater. This study directly used plant materials as catalysts and omits the preparation process of biochar, greatly reduces the preparation cost and secondary pollution of catalysts, and provides theoretical support for the deepening of advanced oxidation technology.

Hydrothermal synthesis of sewage sludge biochar for activation of persulfate for antibiotic removal: Efficiency, stability and mechanism

The use of biochar materials as catalysts to activate persulfate (PS) for the degradation of antibiotics has attracted much attention. In this study, a carbonaceous material (Cu/Zn-SBC) was prepared from sewage sludge by hydrothermal modification. The efficiency of PS activation by Cu/Zn-SBC was investigated using tetracycline (TC) as the model antibiotic. In the Cu/Zn-SBC + PS system, the TC removal rate reached 90.13% at 10 min and exceeded 99% within 4 h. This not only met the requirement of removing large amounts of pollutants in a short time but also achieved the complete removal of pollutants in the subsequent time. Additionally, the Cu/Zn-SBC + PS system was found to be dominated by radical and nonradical pathways. Cu, hydroxyl and carboxyl groups on the surface of Cu/Zn-SBC promoted the production of free radicals and non-free radicals. Under several changes in reaction conditions and water environment factors, the TC removal rate remained above 85% within 10 min. Furthermore, the removal rate of TC was still 85.79% when Cu/Zn-SBC combined with PS was reused twice and 77.14% when reused four times. This study provides an ideal solution for the treatment of sewage sludge, and offers a stable and efficient material for removing antibiotics from wastewater.

Efficient Adsorption of a Sulfonamide Antibiotic in Aqueous Solutions with N-doped Magnetic Biochar: Performance, Mechanism, and Reusability

Conventional biochar has limited effectiveness in the adsorption of sulfonamide antibiotics, while modified biochar exhibits greater adsorption potential. Residues of sulfamethoxazole (SMX) in the aquatic environment can threaten the safety of microbial populations as well as humans. In this study, iron-nitrogen co-doped modified biochar (Fe-N-BC) was prepared from palm fibers and doped with Fe and urea via synthesis at 500 °C. Fe-N-BC has a richer surface functional group based on elemental content, X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The Brunauer-Emmett-Teller (BET) specific surface area test exhibited Fe-N-BC, which possessed a greater surface area (318.203 m²/g) and a better developed pore structure (0.149 cm³/g). The results of the hysteresis loop and the Raman spectrum show that Fe-N-BC has a higher degree of magnetization and graphitization. Fe-N-BC showed a remarkable adsorption capacity for SMX (42.9 mg/g), which could maintain 93.4% adsorption effect after four cycles, and 82.8% adsorption capacity in simulated piggery wastewater. The adsorption mechanism involves pore filling, surface complexation, electrostatic interactions, hydrogen bonding, and π-π EDA interactions. The results of this study show that Fe-N-BC prepared from palm fibers can be a stable, excellent adsorbent for SMX removal from wastewater and has promise in terms of practical applications.

Z-scheme CuO/Fe3O4/GO heterojunction photocatalyst: Enhanced photocatalytic performance for elimination of tetracycline

CuO/Fe₃O₄/GO, as a Z-scheme heterojunction catalyst, was successfully synthesized and used as a photocatalyst for removing tetracycline from aqueous solution. The CuO/Fe₃O₄/GO heterogeneous catalyst combines the narrow bandgap semiconductor CuO, oxygen vacancies of Fe₃O₄, and oxygen-containing reaction sites of GO. Without the addition of activators (persulfate or H₂O₂), the photocatalytic performance on decomposing tetracycline is very excellent. Compared with GO, Fe₃O₄, and CuO, CuO/Fe₃O₄/GO exhibits superior photocatalytic performance. Under visible light radiation, CuO/Fe₃O₄/GO generates h⁺ and ⋅O₂^-, which are the mainly responsible active groups for TC degradation. The effects of various pH, catalysts, and reuse on the degradation performance are evaluated, and the optimal conditions for CuO/Fe₃O₄/GO removal of tetracycline are obtained at pH 7, catalyst dosage 20 mg⋅L^-1, TC at a concentration of 30 mg/L, nearly 97.3% of tetracycline is decomposed. This study has great potential in the treatment of wastewater containing various antibiotics.

A critical review on biochar-based catalysts for the abatement of toxic pollutants from water via advanced oxidation processes (AOPs)

Proper waste disposal is a key towards sustainable development. Wastewater treatment is delineated by the application of efficient, economic and novel catalysts. Biochar is derived from the thermochemical conversion of biomass or any carbonaceous materials and is considered as one of the most eco-friendly substitute for activated carbon. Owing to its large surface area, porosity, crystallinity and active functional groups, the biochar-based catalysts has been extensively applied for the abatement of toxic pollutants from wastewater streams. While most of the reviews focus on the adsorptive properties of the biochar, this review critically analyses the recent development of biochar-based catalysts in the field of advanced oxidation processes (Fenton-like systems, photocatalytic and sonocatalytic systems). The presence of persistent free radicals and oxygen-containing functional groups renders biochar to act as catalyst. The mechanisms accompanying catalytic performance of biochar-based catalysts have also been reviewed. However, the research in this area is quite at an initial phase, and many advancements schemes are essential prior to scale-up and commercialization. Future researches should be devoted to more efficient and rigorous understanding of the structural properties of biochar to engineer the catalytic degradation of targeted pollutants in wastewater treatment.

A stable Fe/Co bimetallic modified biochar for ofloxacin removal from water: adsorption behavior and mechanisms

In this study, Fe-Co-modified biochar (FMBC) loaded with iron (Fe) and cobalt (Co) bimetals after NaOH activation was prepared by pyrolysis using forestry waste cedar bark as a raw material to study its properties and the adsorption of ofloxacin (OFX). The surface structure and chemical properties were analyzed by BET, SEM-EDS, XRD, XPS, and FTIR characterization, and the results showed that the FMBC possessed a larger specific surface area and abundant surface functional groups. FMBC conformed to pseudo-second-order kinetic and Langmuir isotherm models, indicating that the OFX adsorption process on FMBC was a monolayer adsorption process and controlled by chemisorption. The saturation adsorption capacity of FMBC was 10 times higher than that of cedar bark biochar (BC). In addition, the effects of initial pH and coexisting ions on the adsorption process were investigated, and FMBC showed good adsorption, with the best adsorption capacity at pH = 7. Multiple adsorption mechanisms, including physical and chemical interactions, were involved in the adsorption of OFX by FMBC. TG, metal leaching, different water sources, and VSM tests showed that FMBC had good stability and was easily separated from water. Finally, the reusability performance of FMBC was investigated by various methods, and after five cycles it could still reach 75.78-89.31% of the adsorption capacity before recycling. Therefore, the FMBC synthesized in this study is a promising new adsorbent.

Ce(Ⅲ) activates peroxymonosulfate for the degradation of substituted PAHs

Substituted polycyclic aromatic hydrocarbons (SPAHs) are being intensively investigated, considering their high toxicity. Additionally, the mechanism of the effect of substituents on the removal of SPAHs and the activation of Ce(III) ions on peroxymonosulfate (PMS) have not been explored. Here we evaluated the removal efficiency of SPAHs in the oxidation system constructed by Ce(Ⅲ) ions and PMS, with emphasized the effect of substituents on SPAHs degradation. Ce(Ⅲ) has high catalytic performance for PMS, and the degradation percentage of all pollutants was higher than 92%. The significantly negative correlation between the reaction rate constants of SPAHs and the highest occupied molecular orbital-the lowest unoccupied molecular orbital gap, confirms that substituents lead to the differences in the degradation of SPAHs. The generation of reactive oxygen species (SO₄^•-, ^•OH, and ¹O₂) is based on the electron transfer between Ce(Ⅲ) and PMS, and the contribution of ROS to substituted naphthalene varies due to the role of substituents. The Ce(Ⅳ)/Ce(Ⅲ) cycle accelerates the activation of PMS. Based on the transformation products and condensed Fukui function, the possible degradation pathways are inferred. In addition, inorganic anions and organic matter have little effect on the Ce(Ⅲ)/PMS system, which is a prerequisite for applying this system to real-world waste-water for SPAHs removal. This work demonstrates a new model of the degradation mechanism of SPAHs in the Ce(Ⅲ)/PMS system.

Wastewater Purification and All-Solid Z-Scheme Heterojunction ZnO-C/MnO2 Preparation: Properties and Mechanism

Unlike many studies on the preparation of Z-scheme heterojunctions by doping precious metals, in this paper we first prepared a core-shell material obtained by C doping in ZnO and then composite with MnO2 to form a heterojunction; that is, a low-cost and highly catalytic ternary composite catalyst was prepared by a simple hydrothermal reaction. Meanwhile, a large amount of experimental data have enabled the heterostructure type as well as the mechanism of photocatalytic performance to be fully demonstrated. It is proven that C as an intermediate medium achieves electron transport while making up the deficiency of ZnO, and constitutes an all-solid state Z-scheme heterojunction, which enables the rapid transfer of photogenerated electron pairs and visible light irradiation to the stream to improve the photocatalytic performance of the composite photocatalyst. In terms of examination of degradation performance, this catalyst showed a high photodegradation rate of tetracycline hydrochloride (TC) of 92.6% within 60 min, and the surface ZnO-C/MnO2 catalysts also showed good degradation effect on practical petrochemical wastewater in CODcr degradation experiments.

Heterogeneous Metal-Activated Persulfate and Electrochemically Activated Persulfate: A Review

The problem of organic pollution in wastewater is an important challenge due to its negative impact on the aquatic environment and human health. This review provides an outline of the research status for a sulfate-based advanced oxidation process in the removal of organic pollutants from water. The progress for metal catalyst activation and electrochemical activation is summarized including the use of catalyst-activated peroxymonosulfate (PMS) and peroxydisulfate (PDS) to generate hydroxyl radicals and sulfate radicals to degrade pollutants in water. This review covers mainly single metal (e.g., cobalt, copper, iron and manganese) and mixed metal catalyst activation as well as electrochemical activation in recent years. The leaching of metal ions in transition metal catalysts, the application of mixed metals, and the combination with the electrochemical process are summarized. The research and development process of the electrochemical activation process for the degradation of the main pollutants is also described in detail.

Iron pyrophosphate doped carbon nanocomposite for tetracycline degradation by activation of peroxymonosulfate

An Fe2P2O7@C catalyst was synthesized by simple carbonization of complex precursors and showed strong resistance to interference.