Unveiling activation mechanism of persulfate by homologous hemp-derived biochar catalysts for enhanced tetracycline wastewater remediation

Advancements in biochar activating persulfate advanced oxidation processes (PS-AOP), have gained significant attention. However, the understanding of biochar-based catalysts in activating PS remains limited. Herein, biochar (BC) and N-doped biochar (NBC) were synthesized from hemp for activating PS to treat tetracycline (TC) wastewater and analyzed their mechanisms separately. Surprisingly, N-doped in biochar leads to a change in the activation mechanism of PS. The BC-PS system operates mainly through a radical pathway, advantageous for treating soil organic pollution (68%) with pH adaptability (less than 10% variation). Nevertheless, the NBC-PS system primarily employs an electron transfer non-radical pathway, demonstrating stability (only 7% performance degradation over four cycles) and enhanced resistance to anionic interference (less than 10% variation) in organic wastewater treatment. This study provides a technical reference and theoretical foundation for enhancing biochar activation of PS in the removal of organic pollutants from aquatic and terrestrial environments.

Why is HSO5- so effective against bacteria? Insights into the mechanisms of Escherichia coli disinfection by unactivated peroxymonosulfate

This study examined the antimicrobial efficacy of peroxymonosulfate (PMS) against bacteria, using Escherichia coli (E. coli) as a model organism. Our investigation delineates the complex mechanisms exerted by unactivated PMS. Thus, an initial redox reaction between PMS and the target biomolecules of bacteria generates SO4•- as the pivotal reactive species for bacterial inactivation; to a lesser extent, •OH, 1O2, or O2•- may also participate. Damage generated during oxidation was identified using an array of biochemical techniques. Specifically, redox processes are promoted by PMS and SO4•- targets and disrupt various components of bacterial cells, predominantly causing extracellular damage as well as intracellular lesions. Among these, external events are the key to cell death. Finally, by employing gene knockout mutants, we uncovered the role of specific gene responses in the intracellular damage induced by radical pathways. The findings of this study not only expand the understanding of PMS-mediated bacterial inactivation but also explain the ten-fold higher effectiveness of PMS than that reported for H2O2. Hence, we provide clear evidence that unactivated PMS solutions generate SO4•- in the presence of bacteria, and consequently, should be considered an effective disinfection method.

Developing Prussian blue/wood-derived biochar catalyst for persistent organic pollutant degradation: Preparation, characterization, and mechanism

Biomass-derived biochar shows broad promise for persistent organic pollutants (POPs) degradation and thus establishes a more sustainable homestead. However, effective catalytic performance is still challenging. Herein, an efficient catalyst (Prussian blue decorated wood-derived biochar, PBB) was constructed by introducing Prussian blue (PB) into wood-based biochar to activate peroxymonosulfate (PMS) for removing POPs. After anchoring of PB, the degradation performance of biochar was enhanced (degradation efficiency of methylene blue (MB, 20 mg/L) increased from 52% of biochar to 95% of PBB within 60 min). The PBB presents effective MB degradation performance with a wide pH value (3.0 < pH < 11.0) or co-existing diverse anions (Cl-, NO3-, H2PO4-, and HCO3-). Electron paramagnetic resonance (EPR) analysis as well as electrochemical tests confirmed that the non-radical pathway (1O2) is the key to biochar activation of PMS, but by restricting PB into the biochar, the radical pathway (SO4•- and •OH), the non-radical pathway (1O2), and direct electron transfer can work together to activate PMS. In addition, the degradation efficiency could remain about 80% after five-time cyclic tests. This work elucidates the role of PB nanoparticles in enhancing biochar catalysts, which can inspire the development of a carbon-neutralized, cost-effective, and effective strategy for POPs removal.

C-H Bond Functionalization of N-Heteroarenes Mediated by Selectfluor

Herein, recent developments for Selectfluor-mediated C-H functionalization of N-heteroarenes are described. This type of C-H bond activation is an attractive and competitive alternative to traditional methodologies, allowing the functionalization of a variety of chemical functions. In addition, Selectfluor is a more sustainable and economically accessible oxidant compared with expensive/toxic metals or hazardous peroxides. For a practical understanding, the current review classified systematically the reported strategies in four subsections as follows: (1) carbon-carbon formation, (2) carbon-nitrogen bond formation, (3) carbon-chalcogen bond, and (4) carbon-halogen bond formation. Mechanistic aspects and reaction conditions are fully discussed to provide an understanding of the aspects that govern C-H functionalization in N-heteroarenes mediated by Selectfluor.

Enhanced degradation of polyethylene terephthalate plastics by CdS/CeO2 heterojunction photocatalyst activated peroxymonosulfate

Waste plastics have posed enormous to the environment, but their recycling, especially polyethylene terephthalate plastics, was still a huge challenge. Here, CdS/CeO₂ was used as the photocatalyst to promote the degradation of PET-12 plastics by activating peroxymonosulfate (PMS) synergistic photocatalytic system. The results showed that 10 % CdS/CeO₂ had the best performance under the illumination condition, and the weight loss rate of PET-12 could reach 93.92 % after adding 3 mM PMS. The effects of important parameters (PMS dose and co-existing anions) on PET-12 degradation were systematically studied, and the excellent performance of the photocatalytic-activated PMS system was verified by comparison experiments. SO₄^•- contributed the most to the degradation performance of PET-12 plastics, which was demonstrated by electron paramagnetic resonance (EPR) and free radical quenching experiments. Furthermore, the results of GC showed that the gas products including CO, and CH₄. This indicated that the mineralized products could be further reduced to hydrocarbon fuel under the action of the photocatalyst. This job supplied a new idea for the photocatalytic treatment of waste microplastics in the water, which will help recycle waste plastics and recycle carbon resources.

Activation of peroxymonosulfate with cobalt embedded in layered δ-MnO2 for degradation of dimethyl phthalate: Mechanisms, degradation pathway, and DFT calculation

The sulfate radical-based advanced oxidation processes (SR-AOPs) offer huge potential for the removal of organic pollutants. In this study, Co(II)-intercalated δ-MnO₂ (Co-δ-MnO₂) catalyst was successfully prepared by a simple cation exchange reaction. The obtained Co-δ-MnO₂ exhibited high catalytic performance for the removal of dimethyl phthalate (DMP) under the activation of peroxymonosulfate (PMS), with the degradation efficiency reaching 100% within 6 h. Experiments and theoretical calculations revealed that interlayer Co(II) provided unique active sites in Co-δ-MnO₂. In addition, radical and non-radical pathways were confirmed to play a role in Co-δ-MnO₂/PMS system. ^•OH, SO₄^{• ̶}, and ¹O₂ were identified to be the dominating reactive species in Co-δ-MnO₂/PMS system. This study provided new insights into the design of catalysts and laid a foundation for developing modifiable layered heterogeneous catalysts.

An innovative, highly stable Ag/ZIF-67@GO nanocomposite with exceptional peroxymonosulfate (PMS) activation efficacy, for the destruction of chemical and microbiological contaminants under visible light

In this work, Ag nanoparticles were loaded on ZIF-67 covered by graphene oxide (Ag/ZIF-67@GO), and its catalytic performance was studied for the heterogeneous activation of peroxymonosulfate (PMS) under visible-light. The catalyst surface morphology and structure were analyzed by FT-IR, XRD, XPS, DRS, FE-SEM, EDX, TEM, BET, ICP-AES and TGA analysis. The efficacy of PMS activation by the Ag/ZIF-67@GO under visible light was assessed by phenol degradation and E. coli inactivation. Phenol was completely degraded within 30 min by HO^•, SO₄^•- and O₂^•- generated through the photocatalytic PMS activation. In addition, total E. coli inactivation was attained in 15 min that confirmed the highly efficient catalytic activation of PMS by the as-made nanocomposite under visible light. The reaction mechanism was elucidated and the importance of the generated reactive species followed the order of: HO^• > SO₄^•- > O₂^•- > h⁺, implying a radical-pathway dominated process.

Efficient activation of persulfate by a magnetic recyclable rape straw biochar catalyst for the degradation of tetracycline hydrochloride in water

A recyclable magnetic rape straw biochar (MRSB) catalyst was synthesized by a high value-added and energy-saving method using abandoned rape straw as the raw material. The MRSB catalyst showed high catalytic activity and recyclability for activating persulfate (PS) to degrade tetracycline hydrochloride (TC) in water. The Fe₃O₄ in the MRSB greatly promoted the activation of PS. More importantly, the MRSB catalyst exhibited high catalytic performance over a wide pH range (2.99-11.01) for activating PS to degrade TC in water. Moreover, MRSB still had good catalytic activity for TC degradation after 8 recycling cycles and was easily separated by an external magnetic field for reuse. The electron spin resonance (ESR) analysis indicated that the generation of the sulfate radicals (SO₄^-), hydroxyl radicals (OH) and superoxide radicals (O₂^-) was greatly promoted in the MRSB/PS system. As a result, MRSB exhibited 13.24-fold higher reaction rate for activating PS than those of rape straw biochar (RSB). Both radical mechanism and non-radical mechanism existed in the MRSB/PS system, and SO₄^- and singlet oxygen (¹O₂) played a determinative role. This study might give a new way to reuse abandoned rape straw and synthesize new recyclable catalysts for activating PS to degrade organic pollutants in water.

Sono-bromination of aromatic compounds based on the ultrasonic advanced oxidation processes

A novel, mild "sono-halogenation" of various aromatic compounds with potassium halide was investigated under ultrasound in a biphasic carbon tetrachloride/water medium. The feasibility study was first undertaken with the potassium bromide and then extended to chloride and iodide analogues. This methodology could be considered as a new expansion of the ultrasonic advanced oxidation processes (UAOPs) into a synthetic aspect as the developed methodology is linked to the sonolytic disappearance of carbon tetrachloride. Advantages of the present method are not only that the manipulation of the bromination is simple and green, but also that the halogenating agents used are readily available, inexpensive, and easy-handling.