S-scheme Cs2AgBiBr6/Ag3PO4 heterojunction with efficient photocatalysis performance for H2 production and organic pollutant degradation under visible light

Magnetic recyclable visible light-driven Bi2WO6/Fe3O4/RGO for photocatalytic degradation of Microcystin-LR: Mechanism, pathway, and influencing factors

Photocatalysis was an attractive strategy that had potential to tackle the Microcystin-LR (MC-LR) contamination of aquatic ecosystems. Herein, magnetic photocatalyst Fe3O4/Bi2WO6/Reduced graphene oxide composites (Bi2WO6/Fe3O4/RGO) were employed to degrade MC-LR. The removal efficiency and kinetic constant of the optimized Bi2WO6/Fe3O4/RGO (Bi2WO6/Fe3O4-40%/RGO) was 1.8 and 2.3 times stronger than the pure Bi2WO6. The improved activity of Bi2WO6/Fe3O4-40%/RGO was corresponded to the expanded visible light adsorption ability and reduction of photogenerated carrier recombination efficiency through the integration of Bi2WO6 and Fe3O4-40%/RGO. The MC-LR removal efficiency exhibited a positive tendency to the initial density of algae cells, fulvic acid, and the concentration of MC-LR decreased. The existed anions (Cl-, CO3-2, NO3-, H2PO4-) reduced MC-LR removal efficiency of Bi2WO6/Fe3O4-40%/RGO. The Bi2WO6/Fe3O4-40%/RGO could degrade 79.3% of MC-LR at pH = 7 after 180 min reaction process. The trapping experiments and ESR tests confirmed that the h+, ∙OH, and ∙O2- played a significant role in MC-LR degradation. The LC-MS/MS result revealed the intermediates and possible degradation pathways.

Highly efficient recovery of Zn (II) from zinc-containing wastewater by tourmaline tailings geopolymers to in-situ construct nanoscale ZnS for the photodegradation of tetracycline hydrochloride

While treating zinc-containing wastewater, recovering zinc for reuse as a secondary resource has significant environmental and economic benefits. Herein, based on the alkali-activated tourmaline tailings geopolymers (TTG) after adsorption of zinc ions (Zn (II)), a series of new composites with in-situ construction ZnS nanoparticles on TTG (ZnS/TTG) were synthesized, and used as photocatalysts for the photodegradation of tetracycline hydrochloride (TCH) in solution. Specifically, ZnS nanoparticles were uniformly and stably distributed in the layered structure of TTG, interweaving with each other to generate an interfacial electric field, which could induce more photocarrier generation. Meanwhile, TTG acted as an electron acceptor to accelerate the electron transfer at the interface, thus enhancing the photodegradation activity for TCH. The active radical quenching experiments combined with the ESR indicated that the active species produced during the photocatalytic degradation of TCH by ZnS/TTG composites were •O2- and photogenerated h+. When the initial concentration of Zn (II) was 60 mg/L, the synthesized 60-ZnS/TTG composites (0.5 g/L) reached 91.53% degradation efficiency of TCH (10 mg/L) at pH = 6. Furthermore, the possible pathways and mechanism of 60-ZnS/TTG composites photodegraded TCH were revealed with the aid of degraded intermediates. This report not only proposed valuable references for reusing heavy metal ions and removing TCH from wastewater, but also provided promising ideas for realizing the conversion of used adsorbents into high-efficiency photocatalysts.

Fabricating a type II heterojunction by growing lead-free perovskite Cs2AgBiBr6in situ on graphite-like g-C3N4 nanosheets for enhanced photocatalytic CO2 reduction

Perovskite-based photocatalysts have received significant attention for converting CO2 into fuels, such as CO, CH4 or long alkyl chains. However, the use of these catalysts is plagued by several limitations, such as poor stability, lead toxicity, and inadequate conversion efficiency due to the rapid recombination of carriers. Herein, a g-C3N4@Cs2AgBiBr6 (CABB) type II heterojunction photocatalyst has been prepared by growing lead-free CABB nanocrystals (10-14 nm) on the graphite-like carbon nitride (g-C3N4) nanosheet using the in situ crystallization method. The resulting nanocomposite, g-C3N4@CABB, demonstrated an efficient charge transfer pathway via a typical type II heterojunction. With formation rates of 10.30 μmol g-1 h-1 for CO and 0.88 μmol g-1 h-1 for CH4 under visible light irradiation, the nanocomposite exhibited enhanced photocatalytic efficiency in CO2 reduction compared to CABB and g-C3N4. The improved photocatalytic performance of the g-C3N4@CABB nanocomposite was attributed to the fabricated type II heterojunction, which boosted the interfacial charge transfer from g-C3N4 to CABB. This work will inspire the design of heterojunction-based photocatalysts and increase the fundamental understanding of perovskite-based catalysts in the CO2 photoreduction process.

Self-propelled nanojets an interfacial Schottky junctions modulated oxygen vacancies enriched for enhanced photo-Fenton degradation of organic contaminant: Improving H2O2 generation, Fe3+/Fe2+ cycle and enhancing plant metabolism

The study reports an innovative approach on sunlit driven heterostructure photocatalytic generation of H₂O₂ and removal of cefixime. In the present work, we have fabricated Mn/Mg doped CoFe₂O₄ modified CaCr₂O₄ decorated by Ag₃PO₄ quantum dots (Ag₃PO₄ QDs), a p-n-p nano heterojunction. The study promotes the photocatalytic production of H₂O₂ and self-Fenton photocatalytic degradation of cefixime. Egg white-assisted synthesis of Mn-doped CoFe₂O₄ causes the lattice oxygen defect, which enhances the photocatalytic activity. Lattice oxygen defect enable the adsorption of O₂, which enable the conversion of •O² in the valence band of CoFe₂O₄ for the endogenous production of H₂O₂. The higher in the surface area enhance the photocatalytic activity under visible light irradiation. Mn-CoFe₂O₄-CaCr₂O₄-Ag₃PO₄ QDs enables the complete photocatalytic degradation of cefixime (99.9%) and the complete removal was determined by total organic carbon (TOC) removal and it was around 99.4%. Meanwhile the photocatalytic degradation pathway of cefixime was determined by LC-MS/MS. Reusability of the nano heterojunction was determined by six cycle test, and the reusability of the nano heterojunction was 99.8%. Further, the toxicity of the nanomaterial was studied in maize plant and the results shows that the nanoheterojunction enhances the maize growth. The study systematically reveals the robust activity of nano heterojunction for sustainable water treatment.

A dual S-scheme TiO2@In2Se3@Ag3PO4 heterojunction for efficient photocatalytic CO2 reduction

The excellent photoresponse of semiconductors enables them to be promising photocatalysts for CO₂ reduction, but practical application is hampered by fast recombination of photogenerated carriers, low CO₂ capture capacity and poor stability. Herein, mesoporous hollow nanospheres of a dual S-scheme titanium dioxide@indium selenide@silver phosphate (TiO₂@In₂Se₃@Ag₃PO₄) heterojunction with a large specific surface area are designed and synthesized. The products of photocatalytic CO₂ reduction are CH₄, CH₃OH and CO with yields of 3.98, 4.32 and 8.2 μmol g^-1 h^-1, respectively, and the photocatalysts exhibit excellent cycle performance. The excellent photocatalytic performance is attributed to the large specific surface area of the samples and the construction of dual S-scheme heterojunctions. The large specific surface area can provide sufficient active sites for photocatalytic activity. Simultaneously, the built-in electric field (IEF) in the dual S-scheme exposed to light can facilitate the migration of photogenerated electrons from the CB of the oxidation photocatalyst (OP) to the VB of the reduction semiconductor (RP), where they recombine with the photogenerated holes on the VB of the RP, leaving behind photogenerated carriers with high redox ability for photocatalytic activity. This work provides new insights into the mechanism and design of highly efficient heterojunction photocatalysts for CO₂ reduction.