Antifouling streptomycin-based nanofiltration membrane with high permselectivity for dye/salt separation

Fabrication of hollow fiber composite membranes via opposite transmission reaction method for dye/salt separation

The separation layer prepared by the conventional coating-crosslinking method is typically thick and prone to forming defective macropores, significantly affecting the water permeability and dye/salt separation performance of membranes. This work presented a novel method to prepare hollow fiber composite membranes for dye/salt separation based on the opposite transmission reaction of crosslinker. In this method, the macromolecule in situ reacted with a small-molecule crosslinker at the openings of membrane pore channels, forming a separation layer with discontinuous sheet-like and granular structure. Compared to the conventional forward coating-crosslinking method, the separation layer prepared by the opposite transmission reaction method exhibited an ultra-thin thickness of 29.1 nm. Consequently, the composite membrane exhibited a high water permeability of 72.7 L·m-2·h-1·bar-1, which was 2.3 times higher than that of conventional methods. Moreover, the prepared composite membrane presented a more uniformed pore structure, completely retaining the VBB (100%) with a low Na2SO4 rejection of 4.3%, demonstrating excellent dye/salt separation performance. Additionally, the prepared composite membrane exhibited superior anti-fouling properties compared to that prepared by the conventional method. Therefore, the opposite transmission reaction method proposed in this study held promising applications in the preparation of hollow fiber composite membranes for efficient dye/salt separation.

Construction of PDA-PEI/ZIF-L@PE tight ultra-filtration (TUF) membranes on porous polyethylene (PE) substrates for efficient dye/salt separation

Tight ultra-filtration (TUF) membranes were constructed by in situ growing zinc imidazole frameworks micro-crystalline leaves (ZIF-L) in polyethylene imine (PEI) and polydopamine (PDA) deposit layers on porous polyethylene (PE) substrates. The effects of preparation conditions on the surface physical and chemical structures as well as on the dye/salt separation performance of the formed TUF membranes were systematically investigated. By inserting selective water permeation channels and increasing contacting surface areas, in situ-grown ZIF-L arrays tightly cross-linked in the coating matrix greatly increased water permeation without trading off dye/salt retention selectivity. The morphology of the included ZIF-L particles could be varied by adjusting the ligand/Zn molar ratio (α) in the preparation processes. Optimized PDA-PEI/ZIF-L@PE TUF membranes containing ZIF-L of cross-cross block morphology showed very high pure water permeability of 180 ± 20 L·m-2·h-1·bar-1 (LMHB) and retention selectivity (SCR/Na2SO4 and SMB/Na2SO4) of 267 and 43, respectively, as well as excellent stability and anti-fouling properties.

Tailoring the performance of composite PEI nanofiltration membranes via incorporating activated cyclodextrins

Cyclodextrins (CDs) with unique cavity structures have been used as materials for nanofiltration membrane fabrications. In the present work, the activated CD (O-CD), oxidated by NaIO4, and polyethyleneimine (PEI) were co-deposited on a hydrolyzed polyacrylonitrile support, post-treated by glycerol protection and heating treatment, to prepare nanofiltration membranes with low molecular weight cut-off (MWCO). As the cavities in CD present and the aldehyde groups introduced after oxidation, the O-CDs were expected to crosslink the PEI layer and provide extra permeating channels. The filtration experiments showed that the incorporation of O-CDs improved the permeances of the O-CD-PEI/HPAN nanofiltration membranes. The performance can be tailored by the control of the loading or the oxidation degree of the O-CD. At optimal conditions, the permeance increment was nearly double (from 9.2 to 21.1 Lm-2·h-1·bar-1). While the selectivity was without significant sacrifice, the rejection of PEG 200 remained around 90%. Meanwhile, the membrane stability was demonstrated by pro-longed filtratiing a PEG 200 aqueous solution. The constant permeance and rejection confirmed the O-CD-PEI/HPAN membranes were stable. The incorporation of activated CD in PEI offers a facile strategy to promote the permeance of PEI-based membranes.

Interfacial Polymerization of Highly Active Thiolated Cyclodextrin for the Fabrication of a Loose Nanofiltration Membrane with a Chlorine-Resistant Poly(thioester) Linkage

Cyclodextrins have been frequently used to fabricate membranes via interfacial polymerization (IP). However, the relatively low reactivity of pristine cyclodextrins often induces a lower cross-linking density and unsatisfactory separation performance. In this work, to introduce a highly active thiolated β-cyclodextrin (CD-SH) monomer into IP progress, we constructed a dense and porous poly(thioester) linkage on a commercial membrane surface with loose nanofiltration by IP of CD-SH and trimesoyl trichloride (TMC) as the monomer in an aqueous phase and organic phase separately for the first time. Furthermore, the reactivity of CD-SH has been fully demonstrated by the two-phase IP aiming at unmodified β-CD, a CD-SH/TMC freestanding membrane with a thicker interfacial layer and a smoother surface, and a PAN/CD-SH membrane with a narrow porous distribution. The composite membrane possessed superior separation performance for a high rejection (83.1-99.6%) of different anionic dyes and a low rejection (<20%) of salts, as well as a high-efficiency sieving ability of dye/dye and dye/salt mixtures. The membrane with a poly(thioester) selective layer could steadily operate in a long-term filtration test and exhibit great stability, chloride-resistance performance, and recyclability.

Interfacial Polymerization on Polyethersulfone Ultrafiltration Membrane to Prepare Nanofiltration Layers for Dye Separation

Nanofiltration membranes are of great significance to the treatment of dye wastewater. Interfacial polymerization is a widely used method to fabricate nanofiltration membranes. In this study, the interaction of tannic acid-assisted polyethylene polyamine (PEPA) with terephthalaldehyde (TPAL) was performed on PES ultrafiltration membranes using novel nitrogen-rich amine monomers and relatively less reactive aldehyde-based monomers. A new nanofiltration membrane ((T-P-T)/PES) was prepared by interfacial polymerization. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy were used to analyze the elemental composition, bonding state, and surface morphology of the membrane surface. The effects of the PEPA deposition time, TPAL concentration, interfacial reaction time, and curing time on the nanofiltration layer were investigated. The modified membrane, prepared under optimal conditions, showed strong dye separation ability. The permeation of the modified membrane could reach 68.68 L·m^-2·h^-1·bar^-1, and the rejection of various dyes was above 99%. In addition, the (T-P-T)/PES membrane showed good stability during long-term dye separation.