Plasmonic Ag modified Ag3VO4/AgPMo S-scheme heterojunction photocatalyst for boosted Cr(VI) reduction under visible light: Performance and mechanism

Construction of the Z-Scheme Heterogeneous HKUST-1/BiVO4 Nanorod Composite for Enhanced Piezo-Photocatalytic Reduction Performance of Cr(VI)

In recent years, piezo-photocatalysis has become a promising strategy for solving environmental pollution problems by adding additional mechanical energy to the photocatalysis process. This work reported the effective synthesis of a variety of HKUST-1/BiVO4 heterogeneous materials by combining monoclinic BiVO4 and porous HKUST-1 semiconductors. The piezo-photocatalytic properties of HKUST-1/BiVO4 were studied by the reduction of hexavalent chromium (Cr(VI)) under visible-light irradiation and ultrasonic waves. In the piezo-photocatalysis process, the best reduction rates among as-prepared HKUST-1/BiVO4 composites were up to 96.20% of 10 ppm Cr(VI) solution, which was approximately 1.80 times that under visible light and about 4.13 times that under ultrasound. Under the action of the piezoelectric potential, the availability of free radicals increased the reduction rate of Cr(VI) and reached a synergistic effect of 1.14-fold.

Enhancing photocatalytic reduction of Cr(VI) in water through morphological manipulation of g-C3N4 photocatalysts: A comparative study of 1D, 2D, and 3D structures

In this research, the dimensional catalysts of pure g-C3N4 photocatalysts (1D, 2D, and 3D) were investigated for the reduction of the highly toxic/carcinogenic Cr(VI) under visible light irradiation. The catalysts underwent explanation through various surface analysis techniques. According to the BET data, the specific surface area of the 3D catalyst was 1.3 and 7 times higher than those of the 2D and 1D CN catalysts, respectively. The 3D catalyst demonstrated superior performance, achieving an efficiency greater than 99% within 60 min under visible light irradiation in the presence of EDTA due to the abundance of active sites. The study also delved into the influence of factors such as the amount of EDTA-hole scavenger, pH, catalyst dosage, and temperature on the photocatalytic reduction of Cr(VI). Moreover, the 3D catalyst showed excellent reusability, maintaining an efficiency of more than 80% even after 10 cycles, and performed effectively in real water samples. The 3D CN catalyst, with its facile synthesis process, excellent visible light harvesting properties, high reduction efficiency that sustains over multiple cycles, and outstanding performance in real water samples, presents a significant advancement for practical applications in environmental remediation. This research contributes to a new understanding of developing efficient degradation methods for heavy metals in polluted water, highlighting the potential of 3D g-C3N4 catalysts in environmental cleanup efforts.

Synergistic effect on simultaneous treatment of Cr(VI) and chloramphenicol using a non-thermal plasma technology

Toxic organic and heavy metal contaminants commonly exist in industrial waste stream(s) and treatment is of great challenge. In this study, a dielectric barrier discharge (DBD) non-thermal plasma technology was employed for the simultaneous treatment of two important contaminants, chloramphenicol (CAP) and Cr(VI) in an aqueous solution through redox transformations. More than 70% of CAP and 20% of TOC were degraded in 60 min, while Cr(VI) was completely removed in 10 min. The hydroxyl radicals were the main active species for the degradation. Meanwhile, the consumption of hydroxyl radicals was beneficial to the reduction of Cr(VI). The synergistic effect was investigated between CAP degradation and Cr(VI) reduction. The reduction of Cr(VI) would be enhanced in the presence of CAP with a low concentration and could be inhibited under a high concentration, because part of hydroxyl radicals could be consumed by the low-concentration CAP and the obtained intermediates with a higher kinetic rate. However, CAP with a high concentration could react with such reductive species as eaq- and •H, which could compete with Cr(VI) and inhibit the reduction. In addition, the presence of Cr(VI) enhanced the degradation and mineralization of CAP; the study of obtained intermediates indicated that the presence of Cr(VI) changed the degradation path of CAP as Cr(VI) would react with reductive species, enhance the generation of hydroxyl radicals, and cause more hydroxylation reactions. Moreover, the mechanism for the simultaneous redox transformations of CAP and Cr(VI) was illustrated. This study indicates that the DBD non-thermal plasma technology can be one of better solutions for simultaneous elimination of heavy metal and organic contaminants in aquatic environments.

Enhancing the near-infrared upconversion photocatalytic activity of ZnO/Bi3Ti2O8F:Yb3+, Er3+ by modulating the internal electric field through Z-scheme heterojunction construction

Exploring strategies to improve the near-infrared response of photocatalysts is an urgent challenge that can be overcome by utilizing upconversion (UC) luminescence to enhance photocatalysis. This paper reports the fabrication of a ZnO/Bi3Ti2O8F:Yb3+, Er3+ (ZnO/BTOFYE) Z-scheme heterojunction based on a Bi3Ti2O8F:Yb3+, Er3+ (BTOFYE) UC photocatalyst via electrostatic self-assembly. Fermi energy difference at the interface of BTOFYE and ZnO generates a strong internal electric field (IEF) in the Z-scheme heterojunction, offering a novel charge transfer mode that promotes carrier transfer and separation while retaining the strong redox capability. These results are confirmed through in situ X-ray photoelectron spectroscopy, in situ Kelvin probe force microscopy, electron spin resonance, and density functional theory calculations. In addition, the effect of the IEF on the UC luminescence process of Er3+ enhances the luminescence intensity, considerably improving the UC utilization efficiency. The optimal ZnO/BTOFYE degrades 64 % of ciprofloxacin in 120 min, which is 2.3 times more than that degraded by BTOFYE. Overall, the results of this study offer a reference for the rational development of high efficiency UC photocatalysts by generating IEF in Z-scheme heterojunctions.

Surface Plasmon Resonance-Mediated Photocatalytic H2 Generation

The limited yield of H2 production has posed a significant challenge in contemporary research. To address this issue, researchers have turned to the application of surface plasmon resonance (SPR) materials in photocatalytic H2 generation. SPR, arising from collective electron oscillations, enhances light absorption and facilitates efficient separation and transfer of electron-hole pairs in semiconductor systems, thereby boosting photocatalytic H2 production efficiency. However, existing reviews predominantly focus on SPR noble metals, neglecting non-noble metals and SPR semiconductors. In this review, we begin by elucidating five different SPR mechanisms, covering hot electron injection, electric field enhancement, light scattering, plasmon-induced resonant energy transfer, and photo-thermionic effect, by which SPR enhances photocatalytic activity. Subsequently, a comprehensive overview follows, detailing the application of SPR materials-metals, non-noble metals, and SPR semiconductors-in photocatalytic H2 production. Additionally, a personal perspective is offered on developing highly efficient SPR-based photocatalysis systems for solar-to-H2 conversion in the future. This review aims to guide the development of next-gen SPR-based materials for advancing solar-to-fuel conversion.

Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Preparation of core-shell structure Ag@TiO2 plasma photocatalysts and reduction of Cr(VI): Size dependent and LSPR effect

The poor light absorption and low carrier separation efficiency of Titanium dioxide (TiO2) limit its further application. The introduction of plasma metal Ag have the potential to solve these drawbacks owing to its plasma resonance effect. Thus core-shell structure Ag@TiO2 plasma photocatalysts was prepared by using facile reduction method in this work. More specifically, Ag@TiO2 composite catalysts with different Ag loading amounts were prepared in the presence of surfactant PVP. Ag@TiO2 demonstrates excellent light absorption performance and photoelectric separation efficiency compared with pure TiO2. As a result, it displays excellent performance of Cr(VI) reduction under visible light. The optimal composite catalysts Ag@TiO2-5P achieves exceptional visible-light-driven photocatalytic Cr(VI) reduction efficiency of 0.01416 min-1 that is 2.29 times greater than pure TiO2. To investigate the role of PVP, we also synthesized Ag@TiO2-5 without PVP. The experimental results show that although Ag@TiO2-5 Cr(VI) reduction performance is superior to pure TiO2, it significantly decreases compared with Ag@TiO2-5P. The results of TEM and optoelectronic testing show that agglomeration of Ag particles leads to a decrease in the photoelectric separation efficiency of Ag@TiO2-5. The smaller Ag particles provide more active sites and demonstrating a stronger overall local surface plasmon resonance (LSPR) effect. DMPO spin-trapping ESR spectra testing indicates that ∙O2- and ∙OH are the main reactive species. This research provides a potential strategy to prepare Ag-based plasma photocatalysts for environment protection.

S-scheme towards interfacial charge transfer between POMs and MOFs for efficient visible-light photocatalytic Cr (VI) reduction

The establishment of heterojunctions was considered as an exceptional strategy to obtain high-efficiency charge separation and enhanced photocatalytic performance. Herein, a series of FePMo/MIL-53(Fe) (FeM-53) heterojunctions were successfully constructed through in-situ growth of FePMo onto MIL-53(Fe) surface and their photocatalytic capacity were examined by visible-light-induced Cr(VI) reduction. Interestingly, the as-fabricated composites offered various photocatalytic activities controllably relying on the mass ratio of FePMo to MIL-53(Fe). Particularly, the one with the 10% ratio displayed the highest Cr(VI) reduction rate (100%) within 75 min, which was respectively over 4 and 2 folds higher than pure FePMo and MIL-53(Fe). The boosted photoactivity might be ascribed to the establishment of S-scheme heterojunction with suitable band alignment between FePMo and MIL-53(Fe), which broadened the light absorption range and improved charge separation. Further mechanism investigations implied both •O2- and e- were the key reactive species for Cr(VI) removal. Besides, the composite preserved excellent stability after 4 consecutive tests, and performed well in the presence of organic dyes. Such a S-scheme heterojunction may promise for highly efficient environmental mitigation.

Sn(IV)porphyrin-Incorporated TiO2 Nanotubes for Visible Light-Active Photocatalysis

In this study, two distinct photocatalysts, namely tin(IV)porphyrin-sensitized titanium dioxide nanotubes (SnP-TNTs) and titanium dioxide nanofibers (TNFs), were synthesized and characterized using various spectroscopic techniques. SnP-TNTs were formed through the hydrothermal reaction of NaOH with TiO2 (P-25) nanospheres in the presence of Sn(IV)porphyrin (SnP), resulting in a transformation into Sn(IV)porphyrin-imbedded nanotubes. In contrast, under similar reaction conditions but in the absence of SnP, TiO2 (P-25) nanospheres evolved into nanofibers (TNFs). Comparative analysis revealed that SnP-TNTs exhibited a remarkable enhancement in the visible light photodegradation of model pollutants compared to SnP, TiO2 (P-25), or TNFs. The superior photodegradation activity of SnP-TNTs was primarily attributed to synergistic effects between TiO2 (P-25) and SnP, leading to altered conformational frameworks, increased surface area, enhanced thermo-chemical stability, unique morphology, and outstanding visible light photodegradation of cationic methylene blue dye (MB dye). With a rapid removal rate of 95% within 100 min (rate constant = 0.0277 min-1), SnP-TNTs demonstrated excellent dye degradation capacity, high reusability, and low catalyst loading, positioning them as more efficient than conventional catalysts. This report introduces a novel direction for porphyrin-incorporated catalytic systems, holding significance for future applications in environmental remediation.

Design of novel solar-light-induced KBi6O9I/Ag-AgVO3 nanophotocatalyst with Ag-bridged Z-scheme charge carriers separation and boosted photo-elimination of hospital effluents

In this research, a novel solar-light-induced KBi6O9I/Ag-AgVO3 nanophotocatalyst with an Ag-bridged Z-scheme structure has been designed and synthesized through a sonochemical method to photo-degrade antibiotic hospital contaminants under simulated solar-light irradiation. Synthesized nanophotocatalysts with varying KBi6O9I to Ag-AgVO3 weight ratios underwent N2 Adsorption-Desorption, XRD, TEM, UV-Vis DRS, FESEM and PL analyses. The Ag-bridged Z-scheme-structured KBi6O9I/Ag-AgVO3 (1:1) nanophotocatalyst, demonstrated broad light absorption within the solar-light spectrum and showcased effective photocatalytic efficacy in degrading tetracycline antibiotic (88.3% and 83.5% removal for 25 and 50 mg/L, respectively, after 120 min). This performance outperformed other composited photocatalysts, as well as pure Ag-AgVO3 and KBi6O9I photocatalysts. The enhanced degradation efficiency of the KBi6O9I/Ag-AgVO3 (1:1) composite can be ascribed to the synergistic interaction of various elements. These include the surface plasmon resonance impact of silver nanoparticles, their pronounced sensitivity to solar irradiation, and the Z-scheme heterojunction configuration. Collectively, these factors work together to minimize the recombination rate of photoinduced electron-hole pairs, thereby amplifying the efficacy of photodegradation. Furthermore, the KBi6O9I/Ag-AgVO3 (1:1) composite photocatalyst displayed sustained pollutants elimination performance even after undergoing four consecutive cycles.

Leveraging the photocatalytic Cr (VI) reduction by an IRMOF-3@NH2-MIL-101 (Fe) heterostructure based on interfacial Lewis acid-base interaction

A strategy to enhance the photocatalytic performance of metal-organic framework (MOF) based systems for the efficient elimination of Cr(VI) ions from polluted water under visible light irradiation has been developed by constructing MOF@MOF heterojunctions. Specifically, IRMOF-3 was grown in situ around NH2-MIL-101(Fe) based on interfacial Lewis acid-base interaction using 2-aminoterephthalic acid (ATA) as a linker, resulting in the formation of a MOF@MOF heterojunction, designated as IRMOF-3@NH2-MIL-101(Fe). In comparison to individual MOFs, the IRMOF-3@NH2-MIL-101(Fe) heterojunction exhibited a significantly higher photocatalytic reduction efficiency for Cr(VI), achieving a reduction of 95.98% within 120 min under visible-light irradiation. This performance surpasses that of individual MOFs and most reported photocatalysts. Additionally, the mechanism underlying Cr(VI) reduction by IRMOF-3@NH2-MIL-101(Fe) was comprehensively elucidated by analyzing optoelectronic properties, energy band structure, and structural results. It is worth noting that this study represents the first documented instance of photocatalytic Cr(VI) reduction utilizing IRMOF-3 and its interaction with NH2-MIL-101(Fe). The MOF@MOF photocatalyst, leveraging the synergistic effects of its various components, holds great promise for efficiently removing harmful pollutants from water and finds significant potential applications in environmental remediation.

Advancements in TiO2-based photocatalysis for environmental remediation: Strategies for enhancing visible-light-driven activity

Researchers have focused on efficient techniques for degrading hazardous organic pollutants due to their negative impacts on ecological systems, necessitating immediate remediation. Specifically, TiO2-based photocatalysts, a wide-bandgap semiconductor material, have been extensively studied for their application in environmental remediation. However, the extensive band gap energy and speedy reattachment of electron (e-) and hole (h+) pairs in bare TiO2 are considered major disadvantages for photocatalysis. This review extensively focuses on the combination of semiconducting photocatalysts for commercial outcomes to develop efficient heterojunctions with high photocatalytic activity by minimizing the e-/h+ recombination rate. The improved activity of these heterojunctions is due to their greater surface area, rich active sites, narrow band gap, and high light-harvesting tendency. In this context, strategies for increasing visible light activity, including doping with metals and non-metals, surface modifications, morphology control, composite formation, heterojunction formation, bandgap engineering, surface plasmon resonance, and optimizing reaction conditions are discussed. Furthermore, this review critically assesses the latest developments in TiO2 photocatalysts for the efficient decomposition of various organic contaminants from wastewater, such as pharmaceutical waste, dyes, pesticides, aromatic hydrocarbons, and halo compounds. This review implies that doping is an effective, economical, and simple process for TiO2 nanostructures and that a heterogeneous photocatalytic mechanism is an eco-friendly substitute for the removal of various pollutants. This review provides valuable insights for researchers involved in the development of efficient photocatalysts for environmental remediation.

S-scheme MOF-on-MOF heterojunctions for enhanced photo-Fenton Cr(VI) reduction and antibacterial effects

The photocatalytic efficiency is commonly restrained by inferior charge separation rate. Herein, the S-scheme MIL-100(Fe)/NH2-MIL-125(Ti) (MN) photo-Fenton catalyst with the built-in electric field (BEF) was successfully constructed by a simple ball-milling technique. As a result, the MN-3 (the mass ratio of MIL-100(Fe) to NH2-MIL-125(Ti) was 3) composite presented the best visible-light-induced photocatalytic ability, in contrast to pure MIL-100(Fe) and NH2-MIL-125(Ti). The reduction efficiency of Cr(VI) almost reached 100% within 35 min of illumination. Moreover, the MN-3 heterojunction also exhibited the highest antibacterial activity, and about 100% E. coli and more than 90% S. aureus were killed within 60 min of illumination. In photo-Fenton system, In the photo-Fenton system, e-, O2•- and Fe2+ played vital roles for Cr(VI) reduction, and •OH, h+ and O2•- and 1O2 were responsible for sterilization. Additionally, 5 cyclic tests and relevant characterizations confirmed the excellent repeatability and stability of the composite. Also, the S-scheme charge transfer process was put forward. This work offers a novel idea for establishing the MOF-on-MOF photo-Fenton catalyst for high-efficiency environmental mitigation.

Assisted assembling of Bi2WO6/rGO composites: A 3D/2D Hierarchical nanostructures for enhanced photocatalytic water remediation and photo-(electro)catalytic water splitting proficiency

The current study explores the possibility of effectively improving Bi2WO6 (BWO) nanostructures in photocatalytic clean H2 generation and treating water from pharmaceutical wastes. BWO nanoparticles (NPs) hybridized with carbon-derived materials proved to be an efficient candidate in the field of photocatalysis. In this work, BWO nanostructures have been synthesized via the facile co-precipitation technique. The reduced graphene oxide (r-GO) was used as the carbon derivative for the hybridization process. Furthermore, different weight percentages of rGO were loaded with BWO NPs through the wet impregnation technique. The structural, and morphological analysis confirmed the formation of BWO/x% rGO composites. UV-DRS analysis showcased the reduction in bandgap in annexure with increased light absorbance region upon rGO inclusion. Time-resolved photoluminescence (TRPL) proved a prolonged lifetime for BWO/15% rGO composite. In addition, their photocatalytic abilities were put to the test, and BWO/15% rGO nano-hybrid demonstrated a superior degradation of pharmaceutical wastes like tetracycline hydrochloride (TCH) and levofloxacin (LVX) from water in 15 min. Furthermore, photo-electrochemical measurements showed the lowest onset potential and better charge transfer for efficient splitting of water. The photocatalytic water splitting was performed in the presence of sacrificial agents and in the absence of sacrificial agents, where BWO/15% rGO exhibited maximum H2 evolution.

Accelerated electron and mass transfer through constructing H2WO4/Ti3C2/g-C3N4 Z-scheme photocatalyst for environmental remediation

The catalytic efficiency of photocatalysts highly depends on electron transport and mass transfer. Herein, we designed and prepared an effective H2WO4/Ti3C2/g-C3N4 (HTC) Z-scheme heterojunction through interfacial engineering strategy. The results manifested that 97.4% of Cr(VI) (80 μM, 50 mL) could be removed by HTC heterojunction within 10 min under visible light irradiation. The reduction rate constant of Cr(VI) for H2WO4/g-C3N4 (HC) heterojunction increased by a factor of 21 after introducing the conductive Ti3C2. Moreover, 96% of tetracycline (TC, 10 mg L-1, 50 mL) could be degraded by HTC heterojunction within 30 min. The electronic conductivity and ionic diffusion coefficient of HC heterojunction increased by a factor of 64 and 1064 after adding Ti3C2, respectively. This result indicated that the introduction of highly conductive Ti3C2 significantly improved the electron and mass transfer of the heterojunction. Meanwhile, the HCT heterojunction displayed favorable photocurrent, and keep excellent photostability during the long-term test. Moreover, density functional theory (DFT) calculations demonstrated that the internal electric field (IEF) from g-C3N4 to H2WO4 in HCT heterojunction promotes the combination of the photoinduced electrons in the H2WO4 conduction band (CB) with photoinduced holes in the g-C3N4 valence band (VB), thus accelerating the charge transfer in the HCT Z-scheme heterojunction. The antibacterial efficiency of HTC heterojunction against E. coli and S. aureus could reach up to 98.4% and 99.7%, respectively. The degradation intermediates and the potential degradation mechanism of TC were analyzed and proposed based on the results of HPLC-MS analysis. Moreover, the toxicity of TC and degradation intermediates were estimated by Toxicity Estimation Software (T.E.S.T.) based on quantitative structure-activity relationship (QSAR). This work provided a valuable guideline for designing the effective MXene-based Z-scheme heterojunction for environmental remediation.

Preparation of novel diperylene-cored polyimide photocatalyst with broad-spectra response and high stability

A novel polyimide (PI) with broad-spectra response, high photocatalytic activity and stability under super acidic conditions (pH = 0) was synthesized via polymerizing method. Two types of perylene-cored materials (PDIAN and PTCDA) with anhydride and diamine respectively, were applied as precursors for PI polymerization. The as-prepared PI was optimized at 1:1 initial molar ratio of PDIAN to PTCDA. Using common PI (synthesized from melamine and pyromellitic dianhydride) as comparison, the Cr(VI) reduction rate was boosted from 25.4% to 96.6% within 120 min light irradiation. The corresponding rate constant by PI(PDIAN/PTCDA) was estimated to be ca. 11.7 times relative to that by common PI. The boosted performance was ascribed to the strong π-π conjugation from diperylene cores, which can decrease the photoluminescence intensity and electrochemical impedance, so as to promote the separation and transfer of photogenerated electron-hole pairs. In addition, the optimized PI(PDIAN/PTCDA) displayed wide-spectra response, which can still work under 730 nm light. The influencing factors toward Cr(VI) reduction were also clarified to be beneficial at lower pH and increased concentration of hole scavenger. After five cycles at pH 0, the PI still maintained excellent redox activity and structural stability.

Ferric-ellagate complex: A promising multifunctional photocatalyst

The semiconductors have exhibited great potential in the field of photocatalytic energy production, environmental remediation and bactericidal. Nevertheless, those inorganic semiconductors are still restricted in commercial application due to the drawbacks of easy agglomeration and low solar energy conversion efficiency. Herein, ellagic acid (EA) based metal-organic complexes (MOCs) were synthesized through a facile stirring process at room temperature with Fe³⁺, Bi³⁺ and Ce³⁺ as the metal center. The EA-Fe photocatalyst exhibited superior photocatalytic activity toward Cr(VI) reduction, where Cr(VI) were completely removed within 20 min. Meanwhile, EA-Fe also displayed good photocatalytic degradation of organic contaminants and photocatalytic bactericidal performance. The photodegradation rates of TC and RhB by EA-Fe were 15 and 5 times that by bare EA, respectively. Moreover, EA-Fe was capable of effectively eliminating both E. coli and S. aureus bacteria. It was found that EA-Fe was capable of generating superoxide radicals, which could participate in the reduction of heavy metals, degradation of organic contaminants and inactivation of bacteria. A photocatalysis-self-Fenton system could be established by EA-Fe solely. This work would provide a new insight for designing multifunctional MOCs with high photocatalytic efficiency.

PDINH bridged NH2-UiO-66(Zr) Z-scheme heterojunction for promoted photocatalytic Cr(VI) reduction and antibacterial activity

Z-scheme mechanism was a promising approach to considerably enhance photocatalytic activity. In this work, the PDINH/NH₂-UiO-66(Zr) (PNU) heterojunctions were made using a facile ball-milling method. As expect, the optimum PNU-1 composite acted as highly active photocatalyst with 97% Cr(VI) to be reduced within 60 min of LED light illumination. Moreover, the antibacterial rate almost reached 100% for E. coli and S. aureus in 4 h, which was more conspicuous than the others. The wider light absorption range, promoted charge separation because of Z-scheme mechanism and efficient generation of reactive ¹O₂, •O₂^-, and •OH contributed greatly to the enhanced photocatalytic activity. Meanwhile, the superior stability and repeatability of the composites were also demonstrated by five cyclic experiments and related physicochemical characterizations. Therefore, this work provides a novel insight for designing high-efficiency Z-scheme heterostructures between MOFs and organic PDINH for wastewater remediation.

A review on plasmonic-based heterojunction photocatalysts for degradation of organic pollutants in wastewater

Organic pollutants in wastewater are the biggest problem facing the world today due to population growth, rapid increase in industrialization, urbanization, and technological advancement. There have been numerous attempts to use conventional wastewater treatment techniques to address the issue of worldwide water contamination. However, conventional wastewater treatment has a number of shortcomings, including high operating costs, low efficiency, difficult preparation, fast recombination of charge carriers, generation of secondary waste, and limited light absorption. Therefore, plasmonic-based heterojunction photocatalysts have attracted much attention as a promising method to reduce organic pollutant problems in water due to their excellent efficiency, low operating cost, ease of fabrication, and environmental friendliness. In addition, plasmonic-based heterojunction photocatalysts contain a local surface plasmon resonance that enhances the performance of photocatalysts by improving light absorption and separation of photoexcited charge carriers. This review summarizes the major plasmonic effects in photocatalysts, including hot electron, local field effect, and photothermal effect, and explains the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants. Recent work on the development of plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater is also discussed. Lastly, the conclusions and challenges are briefly described and the direction of future development of heterojunction photocatalysts with plasmonic materials is explored. This review could serve as a guide for the understanding, investigation, and construction of plasmonic-based heterojunction photocatalysts for various organic pollutants degradation.

GRAPHICAL ABSTRACT

Herein, the plasmonic effects in photocatalysts, such as hot electrons, local field effect, and photothermal effect, as well as the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants are explained. Recent work on plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater such as dyes, pesticides, phenols, and antibiotics is discussed. Challenges and future developments are also described.

Exceptional visible-light photoelectrocatalytic activity of dual Z-scheme Bi@BiOI-Bi2O3/C3N4 heterojunction for simultaneous remediation of Cr(VI) and phenol

Developing highly efficient and stable photocatalysts remains a major challenge for the remediation of environmental pollutants. In this work, the Bi⁰ decorated BiOI-Bi₂O₃/C₃N₄ heterojunction (Bi@BiOI-Bi₂O₃/C₃N₄) film was fabricated through ultrasonic stripping, I^- etching and in situ UV-reduction processes and then characterized thoroughly by various analytical techniques. The characteristics of simultaneous mitigation of phenol and Cr(VI) were evaluated over Bi@BiOI-Bi₂O₃/C₃N₄ photoanode under visible light. The results exhibited that both phenol and Cr(VI) were removed completely by the photoanode at 2.5 V within 1.5 h, superior to our previous report. The synergy of the surface plasmon resonance (SPR) effect of Bi⁰ and ternary heterojunction accelerated the separation and transfer of photo-induced charge carrier and thus heavily promoted the removal efficiency. Moreover, the excellent stability of this photoanode was hold with no considerably activity attenuation after 4 cycles. Finally, a dual Z-scheme charge transfer process was presented. This work offers an attractive pathway to construct highly active photoelectrode with promising application for simultaneous remediation of organics and heavy metals in wastewater.

Efficient and Stable Catalytic Hydrogen Evolution of ZrO2/CdSe-DETA Nanocomposites under Visible Light

Composite photocatalysts are crucial for photocatalytic hydrogen evolution. In this work, ZrO2/CdSe-diethylenetriamine (ZrO2/CdSe-DETA) heterojunction nanocomposites are synthesized, and efficiently and stably catalyzed hydrogen evolution under visible light. X-ray photoelectron spectroscopy (XPS) and high resolution transmission electron microscope (HRTEM) confirm the formation of heterojunctions between ZrO2 (ZO) and CdSe-DETA (CS). Ultraviolet–visible spectroscopy diffuse reflectance spectra (UV-vis DRS), Mott–Schottky, and theoretical calculations confirm that the mechanism at the heterojunction of the ZrO2/CdSe-DETA (ZO/CS) nanocomposites is Type-I. Among the ZO/CS nanocomposites (ZO/CS-0.4, ZO/CS-0.6, and ZO/CS-0.8; in the nanocomposites, the mass ratio of ZO to CS is 0.1:0.0765, 0.1:0.1148, and 0.1:0.1531, respectively). ZO/CS-0.6 nanocomposite has the best photocatalytic hydrogen evolution activity (4.27 mmol g−1 h−1), which is significantly higher than ZO (trace) and CS (1.75 mmol g−1 h−1). Within four cycles, the ZO/CS-0.6 nanocomposite maintains an efficient catalytic hydrogen evolution rate. Due to the existence of the heterojunction of the composites, the photogenerated electron-hole pairs can be effectively separated, which accelerates the photocatalytic hydrogen evolution reaction and reduces the progress of photocorrosion. This work reveals the feasibility of ZO/CS nanocomposite photocatalysts for hydrogen evolution.