Quantitative Measurement of Protease-Activity with Correction of Probe Delivery and Tissue Absorption Effects

Enzymatically activated near infrared nanoprobes based on amphiphilic block copolymers for optical detection of cancer

BACKGROUND AND OBJECTIVE

Nanotechnology offers the possibility of creating multi-functional structures that can provide solutions for biomedical problems. The nanoprobes herein described are an example of such structures, where nano-scaled particles have been designed to provide high specificity and contrast potential for optical detection of cancer. Specifically, enzymatically activated fluorescent nanoprobes (EANPs) were synthesized as cancer-specific contrast agents for optical imaging.

STUDY DESIGN/MATERIALS AND METHODS

EANPs were prepared by nanoprecipitation of blends of poly(lactic acid)-b-poly(ethylene glycol) and poly(lactic-co-glycolic acid)-b-poly(l-lysine). The lysine moieties were then covalently decorated with the near infrared (NIR) fluorescent molecule AlexaFluor-750 (AF750). Close proximity of the fluorescent molecules to each other resulted in fluorescence quenching, which was reversed by enzymatically mediated cleavage of poly(l-lysine) chains. EANPs were characterized by dynamic light scattering and electron microscopy. Enzymatic development of fluorescence was studied in vitro by fluorescence spectroscopy. Biocompatibility and contrast potential of EANPs were studied in cancerous and noncancerous cells. The potential of the nanoprobes as contrast agents for NIR fluorescence imaging was studied in tissue phantoms.

RESULTS

Spherical EANPs of ∼100 nm were synthesized via nanoprecipitation of polymer blends. Fluorescence activation of EANPs by treatment with a model protease was demonstrated with up to 15-fold optical signal enhancement within 120 minutes. Studies with MDA-MB-231 breast cancer cells demonstrated the cytocompatibility of EANPs, as well as enhanced fluorescence associated with enzymatic activation. Imaging studies in tissue phantoms confirmed the ability of a simple imaging system based on a laser source and CCD camera to image dilute suspensions of the nanoprobe at depths of up to 4 mm, as well as up to a 13-fold signal-to-background ratio for enzymatically activated EANPs compared to un-activated EANPs at the same concentration.

CONCLUSION

Nanoprecipitation of copolymer blends containing poly(l-lysine) was utilized as a method for preparation of highly functional nanoprobes with high potential as contrast agents for fluorescence based imaging of cancer. Lasers Surg. Med. 47:579-594, 2015. © 2015 Wiley Periodicals, Inc.

FRET-based and other fluorescent proteinase probes

The continuous detection of enzyme activities and their application in medical diagnostics is one of the challenges in the translational sciences. Proteinases represent one of the largest groups of enzymes in the human genome and many diseases are based on malfunctions of proteolytic activity. Fluorescent sensors may shed light on regular and irregular proteinase activity in vitro and in vivo and provide a deeper insight into the function of these enzymes and their role in pathophysiological processes. The focus of this review is on Förster resonance energy transfer (FRET)-based proteinase sensors and reporters because these probes are most likely to provide quantitative data. The medical relevance of proteinases are discussed using lung diseases as a prominent example. Probe design and probe targeting are described and fluorescent probe development for disease-relevant proteinases, including matrix-metalloproteinases, cathepsins, caspases, and other selected proteinases, is reviewed.

Chemical biology for understanding matrix metalloproteinase function

The matrix metalloproteinase (MMP) family has long been associated with normal physiological processes such as embryonic implantation, tissue remodeling, organ development, and wound healing, as well as multiple aspects of cancer initiation and progression, osteoarthritis, inflammatory and vascular diseases, and neurodegenerative diseases. The development of chemically designed MMP probes has advanced our understanding of the roles of MMPs in disease in addition to shedding considerable light on the mechanisms of MMP action. The first generation of protease-activated agents has demonstrated proof of principle as well as providing impetus for in vivo applications. One common problem has been a lack of agent stability at nontargeted tissues and organs due to activation by multiple proteases. The present review considers how chemical biology has impacted the progress made in understanding the roles of MMPs in disease and the basic mechanisms of MMP action.

Depth resolution and multiexponential lifetime analyses of reflectance-based time-domain fluorescence data

Time-domain fluorescence imaging is a powerful new technique that adds a rich amount of information to conventional fluorescence imaging. Specifically, time-domain fluorescence can be used to remove autofluorescence from signals, resolve multiple fluorophore concentrations, provide information about tissue microenvironments, and, for reflectance-based imaging systems, resolve inclusion depth. The present study provides the theory behind an improved method of analyzing reflectance-based time-domain data that is capable of accurately recovering mixed concentration ratios of multiple fluorescent agents while also recovering the depth of the inclusion. The utility of the approach was demonstrated in a number of simulations and in tissuelike phantom experiments using a short source-detector separation system. The major findings of this study were (1) both depth of an inclusion and accurate ratios of two-fluorophore concentrations can be recovered accurately up to depths of approximately 1 cm with only the optical properties of the medium as prior knowledge, (2) resolving the depth and accounting for the dispersion effects on fluorescent lifetimes is crucial to the accuracy of recovered ratios, and (3) ratios of three-fluorophore concentrations can be resolved at depth but only if the lifetimes of the three fluorophores are used as prior knowledge. By accurately resolving the concentration ratios of two to three fluorophores, it may be possible to remove autofluorescence or carry out quantitative techniques, such as reference tracer kinetic modeling or ratiometric approaches, to determine receptor binding or microenvironment parameters in point-based time-domain fluorescence applications.

Near-infrared pH-activatable fluorescent probes for imaging primary and metastatic breast tumors

Highly tumor selective near-infrared (NIR) pH-activatable probe was developed by conjugating pH-sensitive cyanine dye to a cyclic arginine-glycine-aspartic acid (cRGD) peptide targeting α(v)β(3) integrin (ABIR), a protein that is highly overexpressed in endothelial cells during tumor angiogenesis. The NIR pH-sensitive dye used to construct the probe exhibits high spectral sensitivity with pH changes. It has negligible fluorescence above pH 6 but becomes highly fluorescent below pH 5, with a pK(a) of 4.7. This probe is ideal for imaging acidic cell organelles such as tumor lysosomes or late endosomes. Cell microscopy data demonstrate that binding of the cRGD probe to ABIR facilitated the endocytosis-mediated lysosomal accumulation and subsequent fluorescence enhancement of the NIR pH-activatable dye in tumor cells (MDA-MB-435 and 4T1/luc). A similar fluorescence enhancement mechanism was observed in vivo, where the tumors were evident within 4 h post injection. Moreover, lung metastases were also visualized in an orthotopic tumor mouse model using this probe, which was further confirmed by histologic analysis. These results demonstrate the potential of using the new integrin-targeted pH-sensitive probe for the detection of primary and metastatic cancer.

Lifetime-based tomographic multiplexing

Near-infrared (NIR) fluorescence tomography of multiple fluorophores has previously been limited by the bandwidth of the NIR spectral regime and the broad emission spectra of most NIR fluorophores. We describe in vivo tomography of three spectrally overlapping fluorophores using fluorescence lifetime-based separation. Time-domain images are acquired using a voltage-gated, intensified charge-coupled device (CCD) in free-space transmission geometry with 750 nm Ti:sapphire laser excitation. Lifetime components are fit from the asymptotic portion of fluorescence decay curve and reconstructed separately with a lifetime-adjusted forward model. We use this system to test the in vivo lifetime multiplexing suitability of commercially available fluorophores, and demonstrate lifetime multiplexing in solution mixtures and in nude mice. All of the fluorophores tested exhibit nearly monoexponential decays, with narrow in vivo lifetime distributions suitable for lifetime multiplexing. Quantitative separation of two fluorophores with lifetimes of 1.1 and 1.37 ns is demonstrated for relative concentrations of 1:5. Finally, we demonstrate tomographic imaging of two and three fluorophores in nude mice with fluorophores that localize to distinct organ systems. This technique should be widely applicable to imaging multiple NIR fluorophores in 3-D.

Cleavage-sensing redox peptide monolayers for the rapid measurement of the proteolytic activity of trypsin and alpha-thrombin enzymes

Ferrocene (Fc)-labeled peptides are end-grafted onto gold electrodes via a flexible polyethylene glycol (PEG) linker, and their ability to act as substrates for proteolytic enzymes trypsin and alpha-thrombin is investigated by cyclic voltammetry. It is shown that whereas a short Fc-tetrapeptide substrate is rapidly cleaved by trypsin, a longer Fc-heptapeptide substrate is required for alpha-thrombin detection. However, in both cases it is observed that not all of the Fc-peptide chains present on the electrode surface are cleavable by the proteases and that the cleavage yield is actually controlled by the surface coverage in the Fc-peptide. Surface dilution of the Fc-peptide using a backfilling molecule such as MCH (6-mercapto-1-hexanol) was required to obtain a cleavage yield larger than 80%. The kinetics of Fc-peptide cleavage by trypsin or alpha-thrombin is then shown to be adequately described by Michaelis Menten kinetics, allowing enzymatic constants k(cat) and K(M) to be determined. The obtained rate constant values showed that the affinity of the enzymes for their respective Fc-peptide substrates is very high (i.e., low K(M) values) whereas that for the cleavage step itself is relatively low (low k(cat) values). Partial compensation of these parameters yields a fast response of the Fc-peptide electrodes to the proteases in solution in the 1-1000 nM range. The type of molecule used to backfill the Fc-peptide layers, either MCH or PEG(6) chains, is shown to modulate the activity of the proteases versus the Fc-peptide layers: in particular, the PEG(6) diluent is specifically shown to decrease the ability of alpha-thrombin to cleave its Fc-peptide substrate whereas trypsin activity is unaffected by the presence of PEG chains.