Solid-state NMR concepts for the investigation of supported transition metal catalysts and nanoparticles

Structures and Dynamics of Complex Guest Molecules in Confinement, Revealed by Solid-State NMR, Molecular Dynamics, and Calorimetry

This review gives an overview of current trends in the investigation of confined molecules such as water, small and higher alcohols, carbonic acids, ethylene glycol, and non-ionic surfactants, such as polyethylene glycol or Triton-X, as guest molecules in neat and functionalized mesoporous silica materials employing solid-state NMR spectroscopy, supported by calorimetry and molecular dynamics simulations. The combination of steric interactions, hydrogen bonds, and hydrophobic and hydrophilic interactions results in a fascinating phase behavior in the confinement. Combining solid-state NMR and relaxometry, DNP hyperpolarization, molecular dynamics simulations, and general physicochemical techniques, it is possible to monitor these confined molecules and gain deep insights into this phase behavior and the underlying molecular arrangements. In many cases, the competition between hydrogen bonding and electrostatic interactions between polar and non-polar moieties of the guests and the host leads to the formation of ordered structures, despite the cramped surroundings inside the pores.

Solution NMR methods for structural and thermodynamic investigation of nanoparticle adsorption equilibria

Characterization of dynamic processes occurring at the nanoparticle (NP) surface is crucial for developing new and more efficient NP catalysts and materials. Thus, a vast amount of research has been dedicated to developing techniques to characterize sorption equilibria. Over recent years, solution NMR spectroscopy has emerged as a preferred tool for investigating ligand-NP interactions. Indeed, due to its ability to probe exchange dynamics over a wide range of timescales with atomic resolution, solution NMR can provide structural, kinetic, and thermodynamic information on sorption equilibria involving multiple adsorbed species and intermediate states. In this contribution, we review solution NMR methods for characterizing ligand-NP interactions, and provide examples of practical applications using these methods as standalone techniques. In addition, we illustrate how the integrated analysis of several NMR datasets was employed to elucidate the role played by support-substrate interactions in mediating the phenol hydrogenation reaction catalyzed by ceria-supported Pd nanoparticles.

Ruthenium nanoparticles canopied by heptagon-containing saddle-shaped nanographenes as efficient aromatic hydrogenation catalysts

Ruthenium nanoparticles stabilized with non-planar polycyclic aromatic hydrocarbons (PAHs) are active catalysts in the hydrogenation of aromatic substrates under mild conditions.

Solid-state NMR studies of non-ionic surfactants confined in mesoporous silica

This review gives an overview of current trends in the investigation of confined molecules such as higher alcohols, ethylene glycol and polyethylene glycol as guest molecules in neat and functionalized mesoporous silica materials. All these molecules have both hydrophobic and hydrophilic parts. They are characteristic role-models for the investigation of confined surfactants. Their properties are studied by a combination of solid-state NMR and relaxometry with other physicochemical techniques and molecular dynamics techniques. It is shown that this combination delivers unique insights into the structure, arrangement, dynamical properties and the guest-host interactions inside the confinement.

Trifunctional Silyl Groups as Anchoring Units in the Preparation of Luminescent Phosphole-Silica Hybrids

A synthetic strategy to β-silylphospholes with three methoxy, ethoxy, chloro, hydrido, or phenyl substituents at silicon has been developed, starting from trimethoxy, triethoxy, or triphenyl silyl substituted phenyl phosphanides and 1,4-diphenyl-1,3-butadiyne. These trifunctional silylphospholes were attached to the surface of uniform spheric silica particles (15 μm) and, for comparison, to a polyhedral silsesquioxane (POSS)-trisilanol as a molecular model to explore their luminescent properties in comparison with the free phospholes. Density functional theory calculations were performed to investigate any electronic perturbation of the phosphole system by the trifunctional silyl anchoring unit. For the immobilized phospholes, cross-polarization magic-angle-spinning NMR measurements (¹³C, ²⁹Si, and ³¹P) were carried out to explore the bonding situation to the silica surface. Thermogravimetric analysis and X-ray photoelectron spectroscopy measurements were performed to approximate the amount of phospholes covering the silica surface. Identity and purity of all novel phospholes have been established with standard techniques (multinuclear NMR, mass spectrometry, and elemental analysis) and X-ray diffraction for the POSS derivative.

Importance learning estimator for the site-averaged turnover frequency of a disordered solid catalyst

For disordered catalysts such as atomically dispersed "single-atom" metals on amorphous silica, the active sites inherit different properties from their quenched-disordered local environments. The observed kinetics are site-averages, typically dominated by a small fraction of highly active sites. Standard sampling methods require expensive ab initio calculations at an intractable number of sites to converge on the site-averaged kinetics. We present a new method that efficiently estimates the site-averaged turnover frequency (TOF). The new estimator uses the same importance learning algorithm [Vandervelden et al., React. Chem. Eng. 5, 77 (2020)] that we previously used to compute the site-averaged activation energy. We demonstrate the method by computing the site-averaged TOF for a simple disordered lattice model of an amorphous catalyst. The results show that with the importance learning algorithm, the site-averaged TOF and activation energy can now be obtained concurrently with orders of magnitude reduction in required ab initio calculations.

Small Molecules, Non-Covalent Interactions, and Confinement

This review gives an overview of current trends in the investigation of small guest molecules, confined in neat and functionalized mesoporous silica materials by a combination of solid-state NMR and relaxometry with other physico-chemical techniques. The reported guest molecules are water, small alcohols, and carbonic acids, small aromatic and heteroaromatic molecules, ionic liquids, and surfactants. They are taken as characteristic role-models, which are representatives for the typical classes of organic molecules. It is shown that this combination delivers unique insights into the structure, arrangement, dynamics, guest-host interactions, and the binding sites in these confined systems, and is probably the most powerful analytical technique to probe these systems.

Improved sensitivity and quantification for 29Si NMR experiments on solids using UDEFT (Uniform Driven Equilibrium Fourier Transform)

We demonstrate the possibility to use UDEFT (Uniform Driven Equilibrium Fourier Transform) technique in order to improve the sensitivity and the quantification of one-dimensional ²⁹Si NMR experiments under magic-angle spinning (MAS). We derive an analytical expression of the signal-to-noise ratios of UDEFT and single-pulse (SP) experiments subsuming the contributions of transient and steady-state regimes. Using numerical spin dynamics simulations and experiments on ²⁹Si-enriched amorphous silica and borosilicate glass, we show that 59₁₈₀298₀59₁₈₀ refocusing composite π-pulse and the adiabatic inversion using tanh/tan modulation improve the robustness of UDEFT technique to rf-inhomogeneity, offset, and chemical shift anisotropy. These pulses combined with a two-step phase cycle limit the pulse imperfections and the artifacts produced by stimulated echoes. The sensitivity of SP, UDEFT and CPMG (Carr-Purcell-Meiboom-Gill) techniques are experimentally compared on functionalized and non-functionalized mesoporous silica. Furthermore, experiments on a flame retardant material prove that UDEFT technique provides a better quantification of ²⁹Si sites with higher sensitivity than SP method.

Characterization of Nanoparticles: Advances

Over the past two decades, the unique properties of engineered nanoparticles (NPs) have placed them at the centre of revolutionary advancements in many sectors of science, technology and commerce. Multi-technique and multi-disciplinary analytical approaches are required to identify, quantify, and characterize the chemical composition, size and size distribution, surface properties and the number and concentration of NPs. In this chapter, an overview of the recent advances in the characterization of NPs will be presented.

Room temperature CO oxidation catalysed by supported Pt nanoparticles revealed by solid-state NMR and DNP spectroscopy

A series of 1 and 2 nm sized platinum nanoparticles deposited on different support materials are investigated by solid-state NMR combined with dynamic nuclear polarization (DNP).

Biofunctionalization of Nano Channels by Direct In-Pore Solid-Phase Peptide Synthesis

Diatom biosilica are highly complex inorganic/organic hybrid materials. To get deeper insights on their structure at a molecular level, model systems that mimic the complex natural compounds were synthesized and characterized. A simple and efficient peptide immobilization strategy was developed, which uses a well-ordered porous silica material as a support and commercially available Fmoc-amino acids, similar to the known solid-phase peptide synthesis. As an example, Fmoc-glycine and Fmoc-phenylalanine are immobilized on the silica support. The success of functionalization was investigated by ¹³ C CP MAS and ²⁹ Si CP MAS solid-state NMR. Thermogravimetric analysis (TGA) and elemental analysis (EA) were performed to quantify the functionalization. Changes of the specific surface area, pore volume, and pore diameters in all modification steps were studied by Brunauer-Emmett-Teller based nitrogen adsorption-desorption measurements (BET). The combination of the analytical methods provided high grafting densities of 2.1±0.2 molecules/nm² on the surface. Furthermore, they allowed for monitoring chemical changes on the pore surface and changes of the pore properties of the material during the different functionalization steps. This universal approach is suitable for the selective synthesis of pores with tunable surface-peptide functionalization, with applications to the synthesis of a big variety of silica-peptide model systems, which in the future may lead to a deeper understanding of complex biological systems.

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

Catalytic activities of heterogeneous catalysts obtained by copolymerization of metal-containing 2-(acetoacetoxy)ethyl methacrylate

Among the synthetic strategies commonly used for supporting a metal complex onto an organic polymer in order to obtain an heterogenous catalyst, a valid choice is to synthesize a metal containing monomer (MCM), which can subsequently be subjected to polymerization with suitable comonomers and crosslinkers, achieving a supported transition metal catalyst as a metal-containing polymer (MCP). In this context, during the last two decades, we explored the use of 2-(acetoacetoxy)ethyl methacrylate (HAAEMA) as a ligand to prepare several MCMs for the relevant MCPs. In this review we summarize and discuss our developments in the studies of the catalytic activity of these “hybrid” catalysts. These catalysts have demonstrated high efficiency and/or excellent selectivity in several kinds of chemical reactions and very often they could be recovered and reused in multiple cycles maintaining their activity and selectivity without suffering from appreciable metal leaching.

Properties of Hydrogen-Bonded Liquids at Interfaces

Effects of interfaces on hydrogen-bonded liquids play major roles in nature and technology. Despite their importance, a fundamental understanding of these effects is still lacking. In large parts, this shortcoming is due to the high complexity of these systems, leading to an interference of various interactions and effects. Therefore, it is advisable to take gradual approaches, which start from well designed and defined model systems and systematically increase the level of intricacy towards more complex mimetics. Moreover, it is necessary to combine insights from a multitude of methods, in particular, to link novel preparation strategies and comprehensive experimental characterization with inventive computational and theoretical modeling. Such concerted approach was taken by a group of preparative, experimentally, and theoretically working scientists in the framework of Research Unit FOR 1583 funded by the Deutsche Forschungsgemeinschaft (German Research Foundation). This special issue summarizes the outcome of this collaborative research. In this introductory article, we give an overview of the covered topics and the main results of the whole consortium. The following contributions are review articles or original works of individual research projects.

Surface Enhanced DNP Assisted Solid-State NMR of Functionalized SiO2 Coated Polycarbonate Membranes

Surface enhanced solid-state NMR by dynamic nuclear polarization (DNP SENS) enables the characterization of the inner-pore surface functionalization of porous etched ion-track membranes exhibiting low specific surface areas compared to typical SBA- or MCM-type mesoporous silica materials. The membranes were conformally coated with a 5 nm thin SiO2 layer by atomic layer deposition. This layer was subsequently modified by aminopropyl silane linkers that allow further functionalization via the terminal amine group. The results evidence that in principle DNP SENS is a capable tool to analyze more complex porous systems, e.g. bioinspired functional etched ion-track membranes down to the molecular level. These results are relevant also for single nanopore systems, for which a direct analysis of the channel surface functionalization is not feasible by classical characterization methods. The applicability of DNP SENS to complex porous systems requires the optimization of the sample preparation and measurement parameters.

Chemically Modified Silica Materials as Model Systems for the Characterization of Water-Surface Interactions

A series of novel functionalized mesoporous silica-based materials with well-defined pore diameters, surface functionalization and surface morphology is synthesized by co-condensation or grafting techniques and characterized by solid-state NMR spectroscopy, DNP enhanced solid state-NMR and thermodynamic techniques. These materials are employed as host-systems for small-guest molecules like water, small alcohols, carbonic acids, small aromatic molecules, binary mixtures and others. The phase-behavior of these confined guests is studied by combinations of one dimensional solid-state NMR techniques (1H MAS, 2H-line shape analysis, 13C CPMAS) and two-dimensional correlation experiments like 1H-29Si- solid-state HETCOR.

Multinuclear solid-state NMR study: a powerful tool for understanding the structure of ZnO hybrid nanoparticles

Characterization of hybrid materials is crucial for gaining an in-depth understanding of nano-objects.

Afterglow Solid-State NMR Spectroscopy

Biomolecular solid-state NMR experiments have traditionally been collected through detection of 13C or 15N nuclei. Since these nuclei have relatively low sensitivity stemming from their smaller gyromagnetic ratios relative to 1H, the time required to collect multi-dimensional datasets serves as a limitation to resonance assignment and structure determination. One improvement in the field has been to employ simultaneous or parallel acquisition techniques with the goal of acquiring more than one dataset at a time and therefore speeding up the overall data collection process. Central to these experiments is the cross-polarization (CP) element, which serves as a way to transfer magnetization between nuclei via magnetic dipolar couplings. In this chapter, we show how residual signal remaining after CP is a polarization source that can be used to acquire additional datasets. The setup of this class of experiments, referred to as Afterglow spectroscopy, is described and demonstrated using a membrane protein transporter involved in multidrug resistance.

Free-Standing and Self-Crosslinkable Hybrid Films by Core-Shell Particle Design and Processing

The utilization and preparation of functional hybrid films for optical sensing applications and membranes is of utmost importance. In this work, we report the convenient and scalable preparation of self-crosslinking particle-based films derived by directed self-assembly of alkoxysilane-based cross-linkers as part of a core-shell particle architecture. The synthesis of well-designed monodisperse core-shell particles by emulsion polymerization is the basic prerequisite for subsequent particle processing via the melt-shear organization technique. In more detail, the core particles consist of polystyrene (PS) or poly(methyl methacrylate) (PMMA), while the comparably soft particle shell consists of poly(ethyl acrylate) (PEA) and different alkoxysilane-based poly(methacrylate)s. For hybrid film formation and convenient self-cross-linking, different alkyl groups at the siloxane moieties were investigated in detail by solid-state Magic-Angle Spinning Nuclear Magnetic Resonance (MAS, NMR) spectroscopy revealing different crosslinking capabilities, which strongly influence the properties of the core or shell particle films with respect to transparency and iridescent reflection colors. Furthermore, solid-state NMR spectroscopy and investigation of the thermal properties by differential scanning calorimetry (DSC) measurements allow for insights into the cross-linking capabilities prior to and after synthesis, as well as after the thermally and pressure-induced processing steps. Subsequently, free-standing and self-crosslinked particle-based films featuring excellent particle order are obtained by application of the melt-shear organization technique, as shown by microscopy (TEM, SEM).

Characterization of secondary phosphine oxide ligands on the surface of iridium nanoparticles

The coordination mode of secondary phosphine oxide ligands on the surface of iridium nanoparticle catalysts was elucidated by solid-state NMR.

31P-Solid-State NMR Characterization and Catalytic Hydrogenation Tests of Novel heterogenized Iridium-Catalysts

The synthesis of novel robust and stable iridium-based immobilized catalysts on silica-polymer hybrid materials (Si-PB-Ir) is described. These catalysts are characterized by a combination of 1D 31P CP-MAS and 2D 31P-1H HETCOR and J-resolved multinuclear solid state NMR experiments. Different binding situations such as singly and multiply coordinated phosphines are identified. Density functional theory (DFT) calculations are performed to corroborate the interpretation of the experimental NMR data, in order to propose a structural model of the heterogenized catalysts. Finally, the catalytic activity of the Si-PB-Ir catalysts is investigated for the hydrogenation of styrene employing para-enriched hydrogen gas.

Synthesis and solid state NMR characterization of novel peptide/silica hybrid materials

The successful synthesis and solid state NMR characterization of silica-based organic-inorganic hybrid materials is presented. For this, collagen-like peptides are immobilized on carboxylate functionalized mesoporous silica (COOH/SiOx) materials. A pre-activation of the silica material with TSTU (O-(N-Succinimidyl)-N,N,N',N'-tetramethyluronium tetrafluoroborate) is performed to enable a covalent binding of the peptides to the linker. The success of the covalent immobilization is indicated by the decrease of the (13)C CP-MAS NMR signal of the TSTU moiety. A qualitative distinction between covalently bound and adsorbed peptide is feasible by (15)N CP-MAS Dynamic Nuclear Polarization (DNP). The low-field shift of the (15)N signal of the peptide's N-terminus clearly identifies it as the binding site. The DNP enhancement allows the probing of natural abundance (15)N nuclei, rendering expensive labeling of peptides unnecessary.

Natural abundance 15N NMR by dynamic nuclear polarization: fast analysis of binding sites of a novel amine-carboxyl-linked immobilized dirhodium catalyst

A novel heterogeneous dirhodium catalyst has been synthesized. This stable catalyst is constructed from dirhodium acetate dimer (Rh2(OAc)4) units, which are covalently linked to amine- and carboxyl-bifunctionalized mesoporous silica (SBA-15-NH2-COOH). It shows good efficiency in catalyzing the cyclopropanation reaction of styrene and ethyl diazoacetate (EDA) forming cis- and trans-1-ethoxycarbonyl-2-phenylcyclopropane. To characterize the structure of this catalyst and to confirm the successful immobilization, heteronuclear solid-state NMR experiments have been performed. The high application potential of dynamic nuclear polarization (DNP) NMR for the analysis of binding sites in this novel catalyst is demonstrated. Signal-enhanced (13)C CP MAS and (15)N CP MAS techniques have been employed to detect different carboxyl and amine binding sites in natural abundance on a fast time scale. The interpretation of the experimental chemical shift values for different binding sites has been corroborated by quantum chemical calculations on dirhodium model complexes.

Multi-responsive cellulose nanocrystal–rhodamine conjugates: an advanced structure study by solid-state dynamic nuclear polarization (DNP) NMR

Monitoring stimuli-responsive cellulose nanocrystals with surface-attached rhodamine spiroamide of low amount using DNP-enhanced ssNMR spectroscopy.