Complementary structural mass spectrometry techniques reveal local dynamics in functionally important regions of a metastable serpin

Electrochemical cofactor recycling of bacterial microcompartments

Bacterial microcompartments (BMCs) are prokaryotic organelles that consist of a protein shell which sequesters metabolic reactions in its interior. While most of the substrates and products are relatively small and can permeate the shell, many of the encapsulated enzymes require cofactors that must be regenerated inside. We have analyzed the occurrence of an enzyme previously assigned as a cobalamin (vitamin B12) reductase and, curiously, found it in many unrelated BMC types that do not employ B12 cofactors. We propose NAD+ regeneration as a new function of this enzyme and name it MNdh, for Metabolosome NADH dehydrogenase. Its partner shell protein BMC-TSE assists in passing the generated electrons to the outside. We support this hypothesis with bioinformatic analysis, functional assays, EPR spectroscopy, protein voltammetry and structural modeling verified with X-ray footprinting. This discovery represents a new paradigm for the BMC field, identifying a new, widely occurring route for cofactor recycling and a new function for the shell as separating redox environments.

Intact mass spectrometry screening to optimize hydroxyl radical dose for protein footprinting

Hydroxyl radical protein footprinting (HRPF) using synchrotron radiation is a well-validated method to assess protein structure in the native solution state. In this method, X-ray radiolysis of water generates hydroxyl radicals that can react with solvent accessible side chains of proteins, with mass spectrometry used to detect the resulting labeled products. An ideal footprinting dose provides sufficient labeling to measure the structure but not so much as to influence the results. The optimization of hydroxyl radical dose is typically performed using an indirect Alexa488 fluorescence assay sensitive to hydroxyl radical concentration, but full evaluation of the experiment's outcome relies upon bottom-up liquid chromatography mass spectrometry (LC-MS) measurements to directly determine sites and extent of oxidative labeling at the peptide and protein level. A direct evaluation of the extent of labeling to provide direct and absolute measurements of dose and "safe" dose ranges in terms of, for example, average numbers of labels per protein, would provide immediate feedback on experimental outcomes prior to embarking on detailed LC-MS analyses. To this end, we describe an approach to integrate intact MS screening of labeled samples immediately following exposure, along with metrics to quantify the extent of observed labeling from the intact mass spectra. Intact MS results on the model protein lysozyme were evaluated in the context of Alexa488 assay results and a bottom-up LC-MS analysis of the same samples. This approach provides a basis for placing delivered hydroxyl radical dose metrics on firmer technical grounds for synchrotron X-ray footprinting of proteins, with explicit parameters to increase the likelihood of a productive experimental outcome. Further, the method directs approaches to provide absolute and direct dosimetry for all types of labeling for protein footprinting.

Strand 1A variant in neuroserpin shows increased aggregation and no loss of inhibition: implication in ameliorating polymerization to retain activity

Neuroserpin (NS) is predominantly expressed in the brain and is the primary inhibitor of tissue plasminogen activator (tPA). NS variants are associated with the neurogenerative disease termed familial encephalopathy with neuroserpin inclusion bodies (FENIB). The disease is characterized by variable age of onset and severity. The reactive center loop (RCL) insertion-based inhibitory mechanism of NS requires a coordinated conformational change leading to a shift in the strands of the β-sheet A and movement of helix F. Strand 1A is connected to the helix F at its C terminal end and with the strand 2A at its N terminal, both these domain move for accommodating the inserting loop; therefore, a variant that influences their movement may alter the inhibition rates. A molecular dynamic simulation analysis of a H138C NS variant from strand 1A showed a large decrease in conformational fluctuations as compared with wild-type NS. H138 was mutated, expressed, purified and a native-PAGE and transmission electron microscopy (TEM) analysis showed that this variant forms large molecular weight aggregates on a slight increase in temperature. However, a circular dichroism analysis showed its secondary structure to be largely conserved. Surprisingly, its tPA inhibition activity and complex formation remain unhindered even after the site-specific labeling of H138C with Alexa fluor C5 maleimide. Further, a helix F-strand 1A (W154C-H138C) double variant still shows appreciable inhibitory activity. Increasingly, it appears that aggregation and not loss of inhibition is the more likely cause of shutter region-based variants phenotypes, indicating that hindering polymer formation using small molecules may retain inhibitory activity in pathological variants of NS.

Complementary Structural Information for Stressed Antibodies from Hydrogen-Deuterium Exchange and Covalent Labeling Mass Spectrometry

Identifying changes in the higher-order structure (HOS) of therapeutic monoclonal antibodies upon storage, stress, or mishandling is important for ensuring efficacy and avoiding adverse effects. Here, we demonstrate diethylpyrocarbonate (DEPC)-based covalent labeling (CL) mass spectrometry (MS) and hydrogen-deuterium exchange (HDX)/MS can be used together to provide site-specific information about subtle conformational changes that are undetectable by traditional techniques. Using heat-stressed rituximab as a model protein, we demonstrate that CL/MS is more sensitive than HDX/MS to subtle HOS structural changes under low stress conditions (e.g., 45 and 55 °C for 4 h). At higher heat stress (65 °C for 4 h), we find CL/MS and HDX/MS provide complementary information, as CL/MS reports on changes in side chain orientation while HDX/MS reveals changes in backbone dynamics. More interestingly, we demonstrate that the two techniques work synergistically to identify likely aggregation sites in the heat-stressed protein. In particular, the C_H3 and C_L domains experience decreases in deuterium uptake after heat stress, while only the C_H3 domain experiences decreases in DEPC labeling extent as well, suggesting the C_H3 domain is a likely site of aggregation and the C_L domain only undergoes a decrease in backbone dynamics. The combination of DEPC-CL/MS and HDX/MS provides valuable structural information, and the two techniques should be employed together when investigating the HOS of protein therapeutics.

The metastable states of proteins

The intriguing process of protein folding comprises discrete steps that stabilize the protein molecules in different conformations. The metastable state of protein is represented by specific conformational characteristics, which place the protein in a local free energy minimum state of the energy landscape. The native-to-metastable structural transitions are governed by transient or long-lived thermodynamic and kinetic fluctuations of the intrinsic interactions of the protein molecules. Depiction of the structural and functional properties of metastable proteins is not only required to understand the complexity of folding patterns but also to comprehend the mechanisms of anomalous aggregation of different proteins. In this article, we review the properties of metastable proteins in context of their stability and capability of undergoing atypical aggregation in physiological conditions.

Considerations in the Analysis of Hydrogen Exchange Mass Spectrometry Data

A major component of a hydrogen exchange mass spectrometry experiment is the analysis of protein and peptide mass spectra to yield information about deuterium incorporation. The processing of data that are produced includes the identification of each peptic peptide to create a master table/array of peptide identity that typically includes sequence, retention time and retention time range, mass range, and undeuterated mass. The amount of deuterium incorporated into each of the peptides in this array must then be determined. Various software platforms have been developed in order to perform this specific type of data analysis. We describe the fundamental parameters to be considered at each step along the way and how data processing, either by an individual or by software, must approach the analysis.

Synergistic Structural Information from Covalent Labeling and Hydrogen-Deuterium Exchange Mass Spectrometry for Protein-Ligand Interactions

Hydrogen-deuterium exchange (HDX) mass spectrometry (MS) and covalent labeling (CL) MS are typically considered to be complementary methods for protein structural analysis, because one probes the protein backbone, while the other probes side chains. For protein-ligand interactions, we demonstrate in this work that the two labeling techniques can provide synergistic structural information about protein-ligand binding when reagents like diethylpyrocarbonate (DEPC) are used for CL because of the differences in the reaction rates of DEPC and HDX. Using three model protein-ligand systems, we show that the slower time scale for DEPC labeling makes it only sensitive to changes in solvent accessibility and insensitive to changes in protein structural fluctuations, whereas HDX is sensitive to changes in both solvent accessibility and structural fluctuations. When used together, the two methods more clearly reveal binding sites and ligand-induced changes to structural fluctuations that are distant from the binding site, which is more comprehensive information than either technique alone can provide. We predict that these two methods will find widespread usage together for more deeply understanding protein-ligand interactions.

Water molecules mediate zinc mobility in the bacterial zinc diffusion channel ZIPB

Regulated ion diffusion across biological membranes is vital for cell function. In a nanoscale ion channel, the active role of discrete water molecules in modulating hydrodynamic behaviors of individual ions is poorly understood because of the technical challenge of tracking water molecules through the channel. Here we report the results of a hydroxyl radical footprinting analysis of the zinc-selective channel ZIPB from the Gram-negative bacterium, Bordetella bronchiseptica Irradiating ZIPB by microsecond X-ray pulses activated water molecules to form covalent hydroxyl radical adducts at nearby residues, which were identified by bottom-up proteomics to detect residues that interact either with zinc or water in response to zinc binding. We found a series of residues exhibiting reciprocal changes in water accessibility attributed to alternating zinc and water binding. Mapping these residues to the previously reported crystal structure of ZIPB, we identified a water-reactive pathway that superimposed on a zinc translocation pathway consisting of two binuclear metal centers and an interim zinc-binding site. The cotranslocation of zinc and water suggested that pore-lining residues undergo a mode switch between zinc coordination and water binding to confer zinc mobility. The unprecedented details of water-mediated zinc transport identified here highlight an essential role of solvated waters in driving zinc coordination dynamics and transmembrane crossing.

Assembly of a GPCR-G Protein Complex

The activation of G proteins by G protein-coupled receptors (GPCRs) underlies the majority of transmembrane signaling by hormones and neurotransmitters. Recent structures of GPCR-G protein complexes obtained by crystallography and cryoelectron microscopy (cryo-EM) reveal similar interactions between GPCRs and the alpha subunit of different G protein isoforms. While some G protein subtype-specific differences are observed, there is no clear structural explanation for G protein subtype-selectivity. All of these complexes are stabilized in the nucleotide-free state, a condition that does not exist in living cells. In an effort to better understand the structural basis of coupling specificity, we used time-resolved structural mass spectrometry techniques to investigate GPCR-G protein complex formation and G-protein activation. Our results suggest that coupling specificity is determined by one or more transient intermediate states that serve as selectivity filters and precede the formation of the stable nucleotide-free GPCR-G protein complexes observed in crystal and cryo-EM structures.

Covalent labeling-mass spectrometry with non-specific reagents for studying protein structure and interactions

Using mass spectrometry (MS) to obtain information about a higher order structure of protein requires that a protein's structural properties are encoded into the mass of that protein. Covalent labeling (CL) with reagents that can irreversibly modify solvent accessible amino acid side chains is an effective way to encode structural information into the mass of a protein, as this information can be read-out in a straightforward manner using standard MS-based proteomics techniques. The differential reactivity of proteins under two or more conditions can be used to distinguish protein topologies, conformations, and/or binding sites. CL-MS methods have been effectively used for the structural analysis of proteins and protein complexes, particularly for systems that are difficult to study by other more traditional biochemical techniques. This review provides an overview of the non-specific CL approaches that have been combined with MS with a particular emphasis on the reagents that are commonly used, including hydroxyl radicals, carbenes, and diethylpyrocarbonate. We describe the reagent and protein factors that affect the reactivity of amino acid side chains. We also include details about experimental design and workflow, data analysis, recent applications, and some future prospects of CL-MS methods.

Reactive Center Loop Insertion in α-1-Antitrypsin Captured by Accelerated Molecular Dynamics Simulation

Protease inhibition by metastable serine protease inhibitors (serpins) is mediated by one of the largest functional intradomain conformational changes known in biology. In this extensive structural rearrangement, protease-serpin complex formation triggers cleavage of the serpin reactive center loop (RCL), its subsequent insertion into central β-sheet A, and covalent trapping of the target protease. In this study, we present the first detailed accelerated molecular dynamics simulation of the insertion of the fully cleaved RCL in α-1-antitrypsin (α₁AT), the archetypal member of the family of human serpins. Our results reveal internal water pathways that allow the initial incorporation of side chains of RCL residues into the protein interior. We observed structural plasticity of the helix F (hF) element that blocks the RCL path in the native state, which is in excellent agreement with previous experimental reports. Furthermore, the simulation suggested a novel role of hF and the connected turn (thFs3A) as chaperones that support the insertion process by reducing the conformational space available to the RCL. Transient electrostatic interactions of RCL residues potentially fine-tune the serpin inhibitory activity. On the basis of our simulation, we generated the α₁AT mutants K168E, E346K, and K168E/E346K and analyzed their inhibitory activity along with their intrinsic stability and heat-induced polymerization. Remarkably, the E346K mutation exhibited enhanced inhibitory activity along with an increased rate of premature structural collapse (polymerization), suggesting a significant role of E346 in the gatekeeping of the strain in the metastable native state.

The role of structural proteomics in vaccine development: recent advances and future prospects

Vaccines are the most effective way to fight infectious diseases saving countless lives since their introduction. Their evolution during the last century made use of the best technologies available to continuously increase their efficacy and safety. Mass spectrometry (MS) and proteomics are already playing a central role in the identification and characterization of novel antigens. Over the last years, we have been witnessing the emergence of structural proteomics in vaccinology, as a major tool for vaccine candidate discovery, antigen design and life cycle management of existing products. In this review, we describe the MS techniques associated to structural proteomics and we illustrate the contribution of structural proteomics to vaccinology discussing potential applications.

Quantitative mapping of protein structure by hydroxyl radical footprinting-mediated structural mass spectrometry: a protection factor analysis

Measurements from hydroxyl radical footprinting (HRF) provide rich information about the solvent accessibility of amino acid side chains of a protein. Traditional HRF data analyses focus on comparing the difference in the modification/footprinting rate of a specific site to infer structural changes across two protein states, e.g., between a free and ligand-bound state. However, the rate information itself is not fully used for the purpose of comparing different protein sites within a protein on an absolute scale. To provide such a cross-site comparison, we present a new, to our knowledge, data analysis algorithm to convert the measured footprinting rate constant to a protection factor (PF) by taking into account the known intrinsic reactivity of amino acid side chain. To examine the extent to which PFs can be used for structural interpretation, this PF analysis is applied to three model systems where radiolytic footprinting data are reported in the literature. By visualizing structures colored with the PF values for individual peptides, a rational view of the structural features of various protein sites regarding their solvent accessibility is revealed, where high-PF regions are buried and low-PF regions are more exposed to the solvent. Furthermore, a detailed analysis correlating solvent accessibility and local structural contacts for gelsolin shows a statistically significant agreement between PF values and various structure measures, demonstrating that the PFs derived from this PF analysis readily explain fundamental HRF rate measurements. We also tested this PF analysis on alternative, chemical-based HRF data, showing improved correlations of structural properties of a model protein barstar compared to examining HRF rate data alone. Together, this PF analysis not only permits a novel, to our knowledge, approach of mapping protein structures by using footprinting data, but also elevates the use of HRF measurements from a qualitative, cross-state comparison to a quantitative, cross-site assessment of protein structures in the context of individual conformational states of interest.

Chromogenic chemical probe for protein structural characterization via ultraviolet photodissociation mass spectrometry

A chemical probe/ultraviolet photodissociation (UVPD) mass spectrometry strategy for evaluating structures of proteins and protein complexes is reported, as demonstrated for lysozyme and beta-lactoglobulin with and without bound ligands. The chemical probe, NN, incorporates a UV chromophore that endows peptides with high cross sections at 351 nm, a wavelength not absorbed by unmodified peptides. Thus, NN-modified peptides can readily be differentiated from nonmodified peptides in complex tryptic digests created upon proteolysis of proteins after their exposure to the NN chemical probe. The NN chemical probe also affords two diagnostic reporter ions detected upon UVPD of the NN-modified peptide that provides a facile method for the identification of NN peptides within complex mixtures. Quantitation of the modified and unmodified peptides allows estimation of the surface accessibilities of lysine residues based on their relative reactivities with the NN chemical probe.

Submillisecond protein folding events monitored by rapid mixing and mass spectrometry-based oxidative labeling

Kinetic measurements can provide insights into protein folding mechanisms. However, the initial (submillisecond) stages of folding still represent a formidable analytical challenge. A number of ultrarapid triggering techniques have been available for some time, but coupling of these techniques with detection methods that are capable of providing detailed structural information has proven to be difficult. The current work addresses this issue by combining submillisecond mixing with laser-induced oxidative labeling. Apomyoglobin (aMb) serves as a model system for our measurements. Exposure of the protein to a brief pulse of hydroxyl radical (·OH) at different time points during folding introduces covalent modifications at solvent accessible side chains. The extent of labeling is monitored using mass spectrometry-based peptide mapping, providing spatially resolved measurements of changes in solvent accessibility. The submillisecond mixer used here improves the time resolution by a factor of 50 compared to earlier ·OH labeling experiments from our laboratory. Data obtained in this way indicate that early aMb folding events are driven by both local and sequence-remote docking of hydrophobic side chains. Assembly of a partially formed A(E)G(H) scaffold after 0.2 ms is followed by stepwise consolidation that ultimately yields the native state. Major conformational changes go to completion within 0.1 s. The technique introduced here is capable of providing in-depth structural information on very short time scales that have thus far been dominated by low resolution (global) spectroscopic probes. By employing submillisecond mixing in conjunction with slower mixing techniques, it is possible to observe complete folding pathways, from fractions of a millisecond all the way to minutes.

Considerations in the analysis of hydrogen exchange mass spectrometry data

A major component of a hydrogen exchange mass spectrometry experiment is the analysis of protein and peptide mass spectra to yield information about deuterium incorporation. The processing of data that are produced includes the identification of each peptic peptide to create a master table/array of peptide sequence, retention time and retention time range, mass range, and undeuterated mass. The amount of deuterium incorporated into each of the peptides in this array must then be determined. Various software platforms have been developed in order to perform this specific type of data analysis. We describe the fundamental parameters to be considered at each step along the way and how data processing, either by an individual or by software, must approach the analysis.

Native ion mobility-mass spectrometry and related methods in structural biology

Mass spectrometry-based methods have become increasingly important in structural biology - in particular for large and dynamic, even heterogeneous assemblies of biomolecules. Native electrospray ionization coupled to ion mobility-mass spectrometry provides access to stoichiometry, size and architecture of noncovalent assemblies; while non-native approaches such as covalent labeling and H/D exchange can highlight dynamic details of protein structures and capture intermediate states. In this overview article we will describe these methods and highlight some recent applications for proteins and protein complexes, with particular emphasis on native MS analysis. This article is part of a Special Issue entitled: Mass spectrometry in structural biology.

Mapping pH-induced protein structural changes under equilibrium conditions by pulsed oxidative labeling and mass spectrometry

Mass spectrometry (MS)-based protein conformational studies are a rapidly growing field. The characterization of partially disordered conformers is of particular interest because these species are not amenable to classical high-resolution techniques. Such equilibrium intermediates can often be populated by exposure to mildly acidic pH. Hydroxyl radical (·OH) introduces oxidative modifications at solvent-accessible side chains, while buried sites are protected. ·OH can be generated by laser photolysis of H(2)O(2) (fast photochemical oxidation of proteins-FPOP). The resulting labeling pattern can be analyzed by MS. The characterization of partially disordered intermediates usually involves comparative measurements under different solvent conditions. It can be challenging to separate structurally induced labeling changes from pH-mediated "secondary" effects. The issue of secondary effects in FPOP has received little prior attention. We demonstrate that with a proper choice of conditions (e.g., in the absence of pH-dependent ·OH scavengers) such undesired phenomena can be almost completely eliminated. Using apomyoglobin as a model system, we map the structure of an intermediate that is formed at pH 4. This species retains a highly protected helix G that is surrounded by partially protected helices A, B, and H. Our results demonstrate the utility of FPOP for the structural characterization of equilibrium intermediates. The near absence of an intrinsic pH dependence represents an advantage compared to hydrogen/deuterium exchange MS.

Early hydrophobic collapse of α₁-antitrypsin facilitates formation of a metastable state: insights from oxidative labeling and mass spectrometry

The biologically active conformation of α₁-antitrypsin (α₁AT) and other serine protease inhibitors represents a metastable state, characterized by an exposed reactive center loop (RCL) that acts as bait for the target enzyme. The protein can also adopt an inactive "latent" conformation that has the RCL inserted as a central strand in β-sheet A. This latent form is thermodynamically more stable than the active conformation. Nonetheless, folding of α₁AT consistently yields the active state. The reasons that the metastable form is kinetically preferred remain controversial. The current work demonstrates that a carefully orchestrated folding mechanism prevents RCL insertion into sheet A. Temporal changes in solvent accessibility during folding are monitored using pulsed oxidative labeling and mass spectrometry. The data obtained in this way complement recent hydrogen/deuterium exchange results. Those hydrogen/deuterium exchange measurements revealed that securing of the RCL by hydrogen bonding of the first β-strand in sheet C is one factor that favors formation of the active conformation. The oxidative labeling data presented here reveal that this anchoring is preceded by the formation of hydrophobic contacts in a confined region of the protein. This partial collapse sequesters the RCL insertion site early on and is therefore instrumental in steering α₁AT towards its active conformation. RCL anchoring by hydrogen bonding starts to contribute at a later stage. Together, these two factors ensure that formation of the active conformation is kinetically favored. This work demonstrates how the use of complementary labeling techniques can provide insights into the mechanisms of protracted folding reactions.

Probing serpin conformational change using mass spectrometry and related methods

The folding, misfolding, and inhibitory mechanisms of serpins are linked to both thermodynamic metastability and conformational flexibility. Characterizing the structural distribution of stability and flexibility in serpins in solution is challenging due to their large size and propensity for aggregation. Structural mass spectrometry techniques offer powerful tools for probing the mechanisms of serpin function and disfunction. In this chapter, we review the principles of the two most commonly employed structural mass spectrometry techniques--hydrogen/deuterium exchange and chemical footprinting--and describe their application to studying serpin flexibility, stability, and conformational change in solution. We also review the application of both hydrogen/deuterium exchange and ion mobility mass spectrometry to probe the mechanism of serpin polymerization and the structure of serpin polymers.

Conformational dynamics of a membrane transport protein probed by H/D exchange and covalent labeling: the glycerol facilitator

Glycerol facilitator (GF) is a tetrameric membrane protein responsible for the selective permeation of glycerol and water. Each of the four GF subunits forms a transmembrane channel. Every subunit consists of six helices that completely span the lipid bilayer, as well as two half-helices (TM7 and TM3). X-ray crystallography has revealed that the selectivity of GF is due to its unique amphipathic channel interior. To explore the structural dynamics of GF, we employ hydrogen/deuterium exchange (HDX) and oxidative labeling with mass spectrometry (MS). HDX-MS reveals that transmembrane helices are generally more protected than extramembrane segments, consistent with data previously obtained for other membrane proteins. Interestingly, TM7 does not follow this trend. Instead, this half-helix undergoes rapid deuteration, indicative of a highly dynamic local structure. The oxidative labeling behavior of most GF residues is consistent with the static crystal structure. However, the side chains of C134 and M237 undergo labeling although they should be inaccessible according to the X-ray structure. In agreement with our HDX-MS data, this observation attests to the fact that TM7 is only marginally stable. We propose that the highly mobile nature of TM7 aids in the efficient diffusion of guest molecules through the channel ("molecular lubrication"). In the absence of such dynamics, host-guest molecular recognition would favor semipermanent binding of molecules inside the channel, thereby impeding transport. The current work highlights the complementary nature of HDX, covalent labeling, and X-ray crystallography for the characterization of membrane proteins.

Structural mass spectrometry of proteins using hydroxyl radical based protein footprinting

Structural MS is a rapidly growing field with many applications in basic research and pharmaceutical drug development. In this feature article the overall technology is described and several examples of how hydroxyl radical based footprinting MS can be used to map interfaces, evaluate protein structure, and identify ligand dependent conformational changes in proteins are described.

Protein folding mechanisms studied by pulsed oxidative labeling and mass spectrometry

Deciphering the mechanisms of protein folding remains a considerable challenge. In this review we discuss the application of pulsed oxidative labeling for tracking protein structural changes in a time-resolved fashion. Exposure to a microsecond OH pulse at selected time points during folding induces the oxidation of solvent-accessible side chains, whereas buried residues are protected. Oxidative modifications can be detected by mass spectrometry. Folding is associated with dramatic accessibility changes, and therefore this method can provide detailed mechanistic insights. Solvent accessibility patterns are complementary to H/D exchange investigations, which report on the extent of hydrogen bonding. This review highlights the application of pulsed OH labeling to soluble proteins as well as membrane proteins.

Modeling of the DNA-binding site of yeast Pms1 by mass spectrometry

Mismatch repair (MMR) corrects replication errors that would otherwise lead to mutations and, potentially, various forms of cancer. Among several proteins required for eukaryotic MMR, MutLα is a heterodimer comprised of Mlh1 and Pms1. The two proteins dimerize along their C-terminal domains (CTDs), and the CTD of Pms1 houses a latent endonuclease that is required for MMR. The highly conserved N-terminal domains (NTDs) independently bind DNA and possess ATPase active sites. Here we use two protein footprinting techniques, limited proteolysis and oxidative surface mapping, coupled with mass spectrometry to identify amino acids involved along the DNA-binding surface of the Pms1-NTD. Limited proteolysis experiments elucidated several basic residues that were protected in the presence of DNA, while oxidative surface mapping revealed one residue that is uniquely protected from oxidation. Furthermore, additional amino acids distributed throughout the Pms1-NTD were protected from oxidation either in the presence of a non-hydrolyzable analog of ATP or DNA, indicating that each ligand stabilizes the protein in a similar conformation. Based on the recently published X-ray crystal structure of yeast Pms1-NTD, a model of the Pms1-NTD/DNA complex was generated using the mass spectrometric data as constraints. The proposed model defines the DNA-binding interface along a positively charged groove of the Pms1-NTD and complements prior mutagenesis studies of Escherichia coli and eukaryotic MutL.

Carboxyl-group footprinting maps the dimerization interface and phosphorylation-induced conformational changes of a membrane-associated tyrosine kinase

Her4 is a transmembrane receptor tyrosine kinase belonging to the ErbB-EGFR family. It plays a vital role in the cardiovascular and nervous systems, and mutations in Her4 have been found in melanoma and lung cancer. The kinase domain of Her4 forms a dimer complex, called the asymmetric dimer, which results in kinase activation. Although a crystal structure of the Her4 asymmetric dimer is known, the dimer affinity and the effect of the subsequent phosphorylation steps on kinase domain conformation are unknown. We report here the use of carboxyl-group footprinting MS on a recombinant expressed, Her4 kinase-domain construct to address these questions. Carboxyl-group footprinting uses a water-soluble carbodiimide, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide, in the presence of glycine ethyl ester, to modify accessible carboxyl groups on glutamate and aspartate residues. Comparisons of Her4 kinase-domain monomers versus dimers and of unphosphorylated versus phosphorylated dimers were made to map the dimerization interface and to determine phosphorylation induced-conformational changes. We detected 37 glutamate and aspartate residues that were modified, and we quantified their extents of modification by liquid chromatography MS. Five residues showed changes in carboxyl-group modification. Three of these residues are at the predicted dimer interface, as shown by the crystal structure, and the remaining two residues are on loops that likely have altered conformation in the kinase dimer. Incubating the Her4 kinase dimers with ATP resulted in dramatic increase in Tyr-850 phosphorylation, located on the activation loop, and this resulted in a conformational change in this loop, as evidenced by reduction in carboxyl-group modification. The kinase monomer-dimer equilibrium was measured using a titration format in which the extent of carboxyl-group footprinting was mathematically modeled to give the dimer association constant (1.5-6.8 × 10(12) dm(2)/mol). This suggests that the kinase-domain makes a significant contribution to the overall dimerization affinity of the full-length Her4 protein.

Computational methods for studying serpin conformational change and structural plasticity

Currently, over a hundred high-resolution structures of serpins are available, exhibiting a wide range of conformations. However, our understanding of serpin dynamics and conformational change is still limited, mainly due to challenges of monitoring structural changes and characterizing transient conformations using experimental methods. Insight can be provided, however, by employing theoretical and computational approaches. In this chapter, we present an overview of such methods, focusing on molecular dynamics and simulation. As serpin conformational dynamics span a wide range of timescales, we discuss the relative merits of each method and suggest which method is suited to specific conformational phenomena.

Serpin-glycosaminoglycan interactions

Serpins (serine protease inhibitors) have traditionally been grouped together based on structural homology. They share common structural features of primary sequence, but not all serpins require binding to cofactors in order to achieve maximal protease inhibition. In order to obtain physiologically relevant rates of inhibition of target proteases, some serpins utilize the unbranched sulfated polysaccharide chains known as glycosaminoglycans (GAGs) to enhance inhibition. These GAG-binding serpins include antithrombin (AT), heparin cofactor II (HCII), and protein C inhibitor (PCI). The GAGs heparin and heparan sulfate have been shown to bind AT, HCII, and PCI, while HCII is also able to utilize dermatan sulfate as a cofactor. Other serpins such as PAI-1, kallistatin, and α(1)-antitrypsin also interact with GAGs with different endpoints, some accelerating protease inhibition while others inhibit it. There are many serpins that bind or carry ligands that are unrelated to GAGs, which are described elsewhere in this work. For most GAG-binding serpins, binding of the GAG occurs in a conserved region of the serpin near or involving helix D, with the exception of PCI, which utilizes helix H. The binding of GAG to serpin can lead to a conformational change within the serpin, which can lead to increased or tighter binding to the protease, and can accelerate the rates of inhibition up to 10,000-fold compared to the unbound native serpin. In this chapter, we will discuss three major GAG-binding serpins with known physiological roles in modulating coagulation: AT (SERPINC1), HCII (SERPIND1), and PCI (SERPINA5). We will review methodologies implemented to study the structure of these serpins and those used to study their interactions with GAG's. We discuss novel techniques to examine the serpin-GAG interaction and finally we review the biological roles of these serpins by describing the mouse models used to study them.

Fast photochemical oxidation of proteins for comparing structures of protein-ligand complexes: the calmodulin-peptide model system

Fast photochemical oxidation of proteins (FPOP) is a mass spectrometry-based protein footprinting method that modifies proteins on the microsecond time scale. Highly reactive (•)OH, produced by laser photolysis of hydrogen peroxide, oxidatively modifies the side chains of approximately one-half the common amino acids on this time scale. Because of the short labeling exposure, only solvent-accessible residues are sampled. Quantification of the modification extent for the apo and holo states of a protein-ligand complex provides structurally sensitive information at the amino-acid level to compare the structures of unknown protein complexes with known ones. We report here the use of FPOP to monitor the structural changes of calmodulin in its established binding to M13 of the skeletal muscle myosin light chain kinase. We use the outcome to establish the unknown structures resulting from binding with melittin and mastoparan. The structural comparison follows a comprehensive examination of the extent of FPOP modifications as measured by proteolysis and LC-MS/MS for each protein-ligand equilibrium. The results not only show that the three calmodulin-peptide complexes have similar structures but also reveal those regions of the protein that became more or less solvent-accessible upon binding. This approach has the potential for relatively high throughput, information-dense characterization of a series of protein-ligand complexes in biochemistry and drug discovery when the structure of one reference complex is known, as is the case for calmodulin and M13 of the skeletal muscle myosin light chain kinase, and the structures of related complexes are not.

Hydrogen exchange mass spectrometry for studying protein structure and dynamics

Hydrogen/deuterium exchange (HDX) mass spectrometry (MS) has become a key technique for monitoring structural and dynamic aspects of proteins in solution. This approach relies on the fact that exposure of a protein to D(2)O induces rapid amide H → D exchange in disordered regions that lack stable hydrogen-bonding. Tightly folded elements are much more protected from HDX, resulting in slow isotope exchange that is mediated by the structural dynamics ("breathing motions") of the protein. MS-based peptide mapping is a well established technique for measuring the mass shifts of individual protein segments. This tutorial review briefly discusses basic fundamentals of HDX/MS, before highlighting a number of recent developments and applications. Gas phase fragmentation strategies represent a promising alternative to the traditional proteolysis-based approach, but experimentalists have to be aware of scrambling phenomena that can be encountered under certain conditions. Electron-based dissociation methods provide a solution to this problem. We also discuss recent advances that facilitate the applicability of HDX/MS to membrane proteins, and to the characterization of short-lived protein folding intermediates. It is hoped that this review will provide a starting point for novices, as well as a useful reference for practitioners, who require an overview of some recent trends in HDX/MS.

Structural analysis of a highly glycosylated and unliganded gp120-based antigen using mass spectrometry

Structural characterization of the HIV-1 envelope protein gp120 is very important for providing an understanding of the protein's immunogenicity and its binding to cell receptors. So far, the crystallographic structure of gp120 with an intact V3 loop (in the absence of a CD4 coreceptor or antibody) has not been determined. The third variable region (V3) of the gp120 is immunodominant and contains glycosylation signatures that are essential for coreceptor binding and entry of the virus into T-cells. In this study, we characterized the structure of the outer domain of gp120 with an intact V3 loop (gp120-OD8) purified from Drosophila S2 cells utilizing mass spectrometry-based approaches. We mapped the glycosylation sites and calculated the glycosylation occupancy of gp120-OD8; 11 sites from 15 glycosylation motifs were determined as having high-mannose or hybrid glycosylation structures. The specific glycan moieties of nine glycosylation sites from eight unique glycopeptides were determined by a combination of ECD and CID MS approaches. Hydroxyl radical-mediated protein footprinting coupled with mass spectrometry analysis was employed to provide detailed information about protein structure of gp120-OD8 by directly identifying accessible and hydroxyl radical-reactive side chain residues. Comparison of gp120-OD8 experimental footprinting data with a homology model derived from the ligated CD4-gp120-OD8 crystal structure revealed a flexible V3 loop structure in which the V3 tip may provide contacts with the rest of the protein while residues in the V3 base remain solvent accessible. In addition, the data illustrate interactions between specific sugar moieties and amino acid side chains potentially important to the gp120-OD8 structure.

Local and global effects of a cavity filling mutation in a metastable serpin

The serpins are an unusual class of protease inhibitors which fold to a metastable form and subsequently undergo a massive conformational change to a stable form when they inhibit their target proteases. The driving force for this conformational change has been extensively investigated by site directed mutagenesis, and it has been found that mutations which stabilize the metastable form frequently result in activity deficiency. Here, we employ hydrogen/deuterium exchange to probe the effects of a cavity filling mutant of alpha(1)AT. The Gly117 --> Phe substitution fills a cavity between the F-helix and the face of beta-sheet A, stabilizes the metastable form of alpha(1)AT by approximately 4 kcal/mol and results in a 60% reduction in inhibitory activity against elastase. Globally, the G117F substitution alters the unfolding mechanism by eliminating the molten globule intermediate that is seen in wild type unfolding. Remarkably, this is accomplished primarily by destabilizing the molten globule rather than stabilizing the metastable native state. Locally, conformational flexibility in the native state is reduced in specific regions: the top of the F-helix, beta-strands 5A, 1C, and 4C, and helix D. Except for strand 4C, all of these regions mediate or propagate conformational changes. The F-helix and strand 5A must be displaced during protease inhibition, displacement of strand 1C is required for polymer formation, and helix D is a site (in antithrombin) of allosteric regulation. Our results indicate that these functionally important regions form a delocalized network of residues that are dynamically coupled and that both local and global stability mediate inhibitory activity.

Pharmacologic intervention targeting glycolytic-related pathways protects against retinal injury due to ischemia and reperfusion

Retinal ischemia contributes to multiple ocular diseases while aminoguanidine (AMG) treatment significantly inhibits the neuronal and vascular degeneration due to acute retinal ischemia and reperfusion (I/R) injury. In the present study, 2-D DIGE was applied to profile global protein expression changes due to retinal I/R injury, and the protection effects mediated by AMG. Retinal ischemia was induced by elevated intraocular pressure to 80-90 mmHg for 2 h, and reperfusion was established afterward. Retinal tissues were collected 2 days after I/R injury. After 2-D DIGE analysis, a total of 96 proteins were identified. Among them, 28 proteins were identified within gel spots whose intensities were normalized by AMG pretreatment, pathway analysis indicated that most were involved in glycolysis and carbohydrate metabolism. Selected enzymes identified by MS/MS within these pathways, including transketolase, triosephosphate isomerase 1, aldolase C, total enolase, and pyruvate kinase were validated by quantitative Western blots. Glycolytic enzymes and other differentially regulated proteins likely play previously unrecognized roles in retinal degeneration after I/R injury, and inhibition of the resulting metabolic changes, using pharmacologically agents such as AMG, serve to inhibit the changes in metabolism and mitigate retinal degeneration. Select glycolytic enzymes may provide novel therapeutic targets for inhibiting the neuronal and vascular degeneration after retinal I/R injury.

Pulsed electron beam water radiolysis for submicrosecond hydroxyl radical protein footprinting

Hydroxyl radical footprinting is a valuable technique for studying protein structure, but care must be taken to ensure that the protein does not unfold during the labeling process due to oxidative damage. Footprinting methods based on submicrosecond laser photolysis of peroxide that complete the labeling process faster than the protein can unfold have been recently described; however, the mere presence of large amounts of hydrogen peroxide can also cause uncontrolled oxidation and minor conformational changes. We have developed a novel method for submicrosecond hydroxyl radical protein footprinting using a pulsed electron beam from a 2 MeV Van de Graaff electron accelerator to generate a high concentration of hydroxyl radicals by radiolysis of water. The amount of oxidation can be controlled by buffer composition, pulsewidth, dose, and dissolved nitrous oxide gas in the sample. Our results with ubiquitin and beta-lactoglobulin A demonstrate that one submicrosecond electron beam pulse produces extensive protein surface modifications. Highly reactive residues that are buried within the protein structure are not oxidized, indicating that the protein retains its folded structure during the labeling process. Time-resolved spectroscopy indicates that the major part of protein oxidation is complete in a time scale shorter than that of large scale protein motions.

Quantifying protein interface footprinting by hydroxyl radical oxidation and molecular dynamics simulation: application to galectin-1

Biomolecular surface mapping methods offer an important alternative method for characterizing protein-protein and protein-ligand interactions in cases in which it is not possible to determine high-resolution three-dimensional (3D) structures of complexes. Hydroxyl radical footprinting offers a significant advance in footprint resolution compared with traditional chemical derivatization. Here we present results of footprinting performed with hydroxyl radicals generated on the nanosecond time scale by laser-induced photodissociation of hydrogen peroxide. We applied this emerging method to a carbohydrate-binding protein, galectin-1. Since galectin-1 occurs as a homodimer, footprinting was employed to characterize the interface of the monomeric subunits. Efficient analysis of the mass spectrometry data for the oxidized protein was achieved with the recently developed ByOnic (Palo Alto, CA) software that was altered to handle the large number of modifications arising from side-chain oxidation. Quantification of the level of oxidation has been achieved by employing spectral intensities for all of the observed oxidation states on a per-residue basis. The level of accuracy achievable from spectral intensities was determined by examination of mixtures of synthetic peptides related to those present after oxidation and tryptic digestion of galectin-1. A direct relationship between side-chain solvent accessibility and level of oxidation emerged, which enabled the prediction of the level of oxidation given the 3D structure of the protein. The precision of this relationship was enhanced through the use of average solvent accessibilities computed from 10 ns molecular dynamics simulations of the protein.

Synchrotron protein footprinting supports substrate translocation by ClpA via ATP-induced movements of the D2 loop

Synchrotron X-ray protein footprinting is used to study structural changes upon formation of the ClpA hexamer. Comparative solvent accessibilities between ClpA monomer and ClpA hexamer samples are in agreement throughout most of the sequence, with calculations based on two previously proposed hexameric models. The data differ substantially from the proposed models in two parts of the structure: the D1 sensor 1 domain and the D2 loop region. The results suggest that these two regions can access alternate conformations in which their solvent protection is greater than that in the structural models based on crystallographic data. In combination with previously reported structural data, the footprinting data provide support for a revised model in which the D2 loop contacts the D1 sensor 1 domain in the ATP-bound form of the complex. These data provide the first direct experimental support for the nucleotide-dependent D2 loop conformational change previously proposed to mediate substrate translocation.

Installation and testing of a focusing mirror at beamline X28C for high flux x-ray radiolysis of biological macromolecules

The NSLS X28C white-light beamline has been upgraded with a focusing mirror in order to provide increased x-ray density and a wide selection of beam shapes at the sample position. The cylindrical single crystal silicon mirror uses an Indalloy 51 liquid support bath as both a mechanism for heat transfer and a buoyant support to counter the effects of gravity and correct for minor parabolic slope errors. Calorimetric measurements were performed to verify that the calculated more than 200-fold increase in flux density is delivered by the mirror at the smallest beam spot. The properties of the focused beam relevant to radiolytic footprinting, namely, the physical dimensions of the beam, the effective hydroxyl radical dose delivered to the sample, and sample heating upon irradiation, have been studied at several mirror angles.