Supercritical solvent impregnation of ophthalmic drugs on chitosan derivatives

Morphological 3D Analysis of PLGA/Chitosan Blend Polymer Scaffolds and Their Impregnation with Olive Pruning Residues via Supercritical CO2

Natural extracts, such as those from the residues of the Olea europaea industry, offer an opportunity for use due to their richness in antioxidant compounds. These compounds can be incorporated into porous polymeric devices with huge potential for tissue engineering such as bone, cardiovascular, osteogenesis, or neural applications using supercritical CO2. For this purpose, polymeric scaffolds of biodegradable poly(lactic-co-glycolic acid) (PLGA) and chitosan, generated in situ by foaming, were employed for the supercritical impregnation of ethanolic olive leaf extract (OLE). The influence of the presence of chitosan on porosity and interconnectivity in the scaffolds, both with and without impregnated extract, was studied. The scaffolds have been characterized by X-ray computed microtomography, scanning electron microscope, measurements of impregnated load, and antioxidant capacity. The expansion factor decreased as the chitosan content rose, which also occurred when OLE was used. Pore diameters varied, reducing from 0.19 mm in pure PLGA to 0.11 mm in the two experiments with the highest chitosan levels. The connectivity was analyzed, showing that in most instances, adding chitosan doubled the average number of connections, increasing it by a factor of 2.5. An experiment was also conducted to investigate the influence of key factors in the impregnation of the extract, such as pressure (10-30 MPa), temperature (308-328 K), and polymer ratio (1:1-9:1 PLGA/chitosan). Increased pressure facilitated increased OLE loading. The scaffolds were evaluated for antioxidant activity and demonstrated substantial oxidation inhibition (up to 82.5% under optimal conditions) and remarkable potential to combat oxidative stress-induced pathologies.

A Review of Natural Polysaccharides: Sources, Characteristics, Properties, Food, and Pharmaceutical Applications

Natural polysaccharides, which are described in this study, are some of the most extensively used biopolymers in food, pharmaceutical, and medical applications, because they are renewable and have a high level of biocompatibility and biodegradability. The fundamental understanding required to properly exploit polysaccharides potential in the biocomposite, nanoconjugate, and pharmaceutical industries depends on detailed research of these molecules. Polysaccharides are preferred over other polymers because of their biocompatibility, bioactivity, homogeneity, and bioadhesive properties. Natural polysaccharides have also been discovered to have excellent rheological and biomucoadhesive properties, which may be used to design and create a variety of useful and cost-effective drug delivery systems. Polysaccharide-based composites derived from natural sources have been widely exploited due to their multifunctional properties, particularly in drug delivery systems and biomedical applications. These materials have achieved global attention and are in great demand because to their biochemical properties, which mimic both human and animal cells. Although synthetic polymers account for a substantial amount of organic chemistry, natural polymers play a vital role in a range of industries, including biomedical, pharmaceutical, and construction. As a consequence, the current study will provide information on natural polymers, their biological uses, and food and pharmaceutical applications.

The In Vitro, In Vivo, and PBPK Evaluation of a Novel Lung-Targeted Cardiac-Safe Hydroxychloroquine Inhalation Aerogel

Hydroxychloroquine (HCQ) was repurposed for COVID-19 treatment. Subtherapeutic HCQ lung levels and cardiac toxicity of oral HCQ were overcome by intratracheal (IT) administration of lower HCQ doses. The crosslinker-free supercritical fluid technology (SFT) produces aerogels and impregnates them with drugs in their amorphous form with efficient controlled release. Mechanistic physiologically based pharmacokinetic (PBPK) modeling can predict the lung's epithelial lining fluid (ELF) drug levels. This study aimed to develop a novel HCQ SFT formulation for IT administration to achieve maximal ELF levels and minimal cardiac toxicity. HCQ SFT formulation was prepared and evaluated for physicochemical, in vitro release, pharmacokinetics, and cardiac toxicity. Finally, the rat HCQ ELF concentrations were predicted using PBPK modeling. HCQ was amorphous after loading into the chitosan-alginate nanoporous microparticles (22.7±7.6 μm). The formulation showed a zero-order release, with only 40% released over 30 min compared to 94% for raw HCQ. The formulation had a tapped density of 0.28 g/cm3 and a loading efficiency of 35.3±1.3%. The IT administration of SFT HCQ at 1 mg/kg resulted in 23.7-fold higher bioavailability, fourfold longer MRT, and eightfold faster absorption but lower CK-MB and LDH levels than oral raw HCQ at 4 mg/kg. The PBPK model predicted 6 h of therapeutic ELF levels for IT SFT HCQ and a 100-fold higher ELF-to-heart concentration ratio than oral HCQ. Our findings support the feasibility of lung-targeted and more effective SFT HCQ IT administration for COVID-19 compared to oral HCQ with less cardiac toxicity. Graphical abstract.

Recent Advances in Chitosan-Based Applications-A Review

Chitosan derived from chitin gas gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.

A Bioengineered Quercetin-Loaded 3D Bio-Polymeric Graft for Tissue Regeneration and Repair

Phytochemicals extracted from plant sources have potential remedial effects to cure a broad range of acute to severe illnesses and ailments. Quercetin is a flavonoid isolated from different dietary sources such as vegetables and fruits, exhibiting strong anti-inflammatory, anti-oxidative and non-toxic effects on the biological system. However, the direct uptake or administration of quercetin results in loss of functionality, poor activity, and reduced shelf-life of the bioactive component. In this regard, to improve the uptake, potential, and efficiency of natural components with prolonged storage in the host's body after administration, numerous polymer drug delivery systems have been created. In the current study, three-dimensional (3D) porous (porosity: 92%; pore size: 81 µm) bio-polymeric foaming gelatin-alginate (GA) beads were fabricated for the entrapment of quercetin as therapeutic drug molecules-gelatin-alginate-quercetin (GAQ). The GAQ beads showed a significant uptake of quercetin molecules resulting in a reduction of reduced porosity up to 64% and pore size 63 µm with a controlled release profile in the PBS medium, showing ~80% release within 24 h. Subsequently, the GAQ beads showed remarkable antioxidant effects, and 95% anti-inflammatory activities along with remarkable in vitro cell culture growth and the observed proliferation of seeded fibroblast cells. Thus, we can conclude that the consistent release of quercetin showed non-toxic effects on normal cell lines and the bioactive surface of the GAQ beads enhances cell adhesion, proliferation, and differentiation more effectively than control GA polymeric beads and tissue culture plates (TCP). In summary, these findings show that these GAQ beads act as a biocompatible 3D construct with enormous potential in medicinal administration and tissue regeneration for accelerated healing.

Supercritical Impregnation of Ketoprofen into Polylactic Acid for Biomedical Application: Analysis and Modeling of the Release Kinetic

Ketoprofen (KET) is an anti-inflammatory drug often used in medicine due to its analgesic and antipyretic effects. If it is administered in a controlled form by means of different dosing devices, it acts throughout the patient’s recovery period improving its efficacy. This study intends to support the use of supercritical solvent impregnation (SSI) as an efficient technique to develop polylactic acid (PLA) functionalized with ketoprofen, for use as controlled drug release devices. For this purpose, firstly, the influence of different SSI variables on the desirable swelling of the polymer structure, while avoiding their foaming, were evaluated. Then, the resulting ketoprofen loading was evaluated under different pressure/temperature conditions. It was generally found that as pressure and temperature are higher, the drug impregnation loads also increase. The maximum impregnation loads (at about 9% KET/PLA) were obtained at 200 bar and 75 °C. In vitro drug release tests of the impregnated compound were also carried out, and it was found that drug release profiles were also dependent on the specific pressure and temperature conditions used for the impregnation of each polymer filament.

Intraocular lenses as drug delivery devices

Cataract surgery is one of the most common and safe surgical procedures nowadays. However, it is not free of risks as endophthalmitis, ocular inflammation and posterior capsule opacification (PCO) can appear as post-surgery complications. The usual eye drop therapy used as prophylaxis for the former two complications has limited bioavailability. In turn, the prevention of PCO involves an adequate surgical technique and a careful choice of intraocular lens (IOL) design and material. Also, different drugs have been tested to reduce incidence of PCO, but no prophylaxis demonstrated to be completely effective. In the past few years, IOLs have been proposed as drug delivery devices to replace or/assist the usual eye drop therapy in the post-operatory period. The great advantage of drug loaded IOLs would be to ensure a continuous drug delivery, independent of patient's compliance without requiring any further action besides IOL implantation. The biggest challenge of drug loaded IOLs production is to achieve a controlled and extended release that meet therapeutic needs without inducing toxicity to the surrounding ocular tissues or affecting the physical properties of the lens. This review starts by addressing the possible complications after cataract surgery, as well as the most commonly adopted prophylaxis for each of them. The various types of IOLs are described and their main advantages/disadvantages are discussed. The different strategies pursued to incorporate drugs into the IOLs and control their release, which include soaking the IOL in the drugs solution, supercritical impregnation, surface modifications, and attachment of drug reservoirs to the IOL, among others, are reported. For each strategy, a summary of the publications is presented, which includes the target complication, the types and amounts of released drugs and the IOL materials. A brief description of each individual study is given afterwards. Optimization of drug loaded IOLs through mathematical modelling and possible issues raised by their sterilization are also tackled. At the end, the future commercialization of drug loaded IOLs is commented.

Application of Fluids in Supercritical Conditions in the Polymer Industry

This article reviews the use of fluids under supercritical conditions in processes related to the modern and innovative polymer industry. The most important processes using supercritical fluids are: extraction, particle formation, micronization, encapsulation, impregnation, polymerization and foaming. This review article briefly describes and characterizes the individual processes, with a focus on extraction, micronization, particle formation and encapsulation. The methods mentioned focus on modifications in the scope of conducting processes in a more ecological manner and showing higher quality efficiency. Nowadays, due to the growing trend of ecological solutions in the chemical industry, we see more and more advanced technological solutions. Less toxic fluids under supercritical conditions can be used as an ecological alternative to organic solvents widely used in the polymer industry. The use of supercritical conditions to conduct these processes creates new opportunities for obtaining materials and products with specialized applications, in particular in the medical, pharmacological, cosmetic and food industries, based on substances of natural sources. The considerations contained in this article are intended to increase the awareness of the need to change the existing techniques. In particular, the importance of using supercritical fluids in more industrial methods and for the development of already known processes, as well as creating new solutions with their use, should be emphasized.

An overview of polymeric nano-biocomposites as targeted and controlled-release devices

In recent years, controlled drug delivery has become an important area of research. Nano-biocomposites can fulfil the necessary requirements of a targeted drug delivery device. This review describes use of polymeric nano-biocomposites in controlled drug delivery devices. Selection of suitable biopolymer and methods of preparation are discussed.

Bioactive compounds of Copaifera sp. impregnated into three-dimensional gelatin dressings

This study investigates the immersion impregnation process of the copaiba oleoresin and leaf extract into Spongostan^TM gelatin dressings to be used in wound healing treatment. Copaiba oleoresin and leaf extract were characterized by spectroscopic analyses in order to confirm the identity of bioactive compounds and their compatibility with dressing material. Their antibacterial properties were evaluated and oleoresin activity against Escherichia coli and Staphylococcus aureus bacteria was confirmed while the leaf extract showed activity against S. aureus. Solubility assays in organic solvents revealed that copaiba oleoresin is miscible into dichloromethane, while leaf extract showed a 20 g/ml solubility coefficient at 35 °C in the same solvent. These miscibility and solubility conditions were selected for the impregnation process. Using the organic solvent immersion method, 11 mg of copaiba oleoresin and 19 mg of leaf extract were impregnated into 1 cm³ of 3D matrix. The main bioactives from copaiba products, such as β-caryophyllene and lupeol, were tracked in the gelatin dressing. DSC and TGA assays showed no thermal changes in the samples after impregnation. Furthermore, the spatial organization of foam structure of the dressings was preserved after superficial distribution of oleoresin, as well as amorphous-like particulate deposition of leaf extract. The main compound of copaiba oleoresin, β-caryophyllene, which exhibits well-known anti-inflammatory activities, and the main compound of copaiba leaf extract, lupeol, also an anti-inflammatory agent, were successfully impregnated using organic solvent in wound dressings and are promising for further application on tissue wound healing. Graphical Abstract.

Supercritical fluid technology for the development of innovative ophthalmic medical devices: Drug loaded intraocular lenses to mitigate posterior capsule opacification

Supercritical impregnation technology was applied to load acrylic intraocular lenses (IOLs) with methotrexate to produce a sustained drug delivery device to mitigate posterior capsule opacification. Drug release kinetics were studied in vitro and used to determine the drug loading. Loaded IOLs and control IOLs treated under the same operating conditions, but without drug, were implanted ex vivo in human donor capsular bags. The typical cell growth was observed and immunofluorescence staining of three common fibrosis markers, fibronectin, F-actin and α-smooth muscle actin was carried out. Transparent IOLs presenting a sustained release of methotrexate for more than 80 days were produced. Drug loading varying between 0.43 and 0.75 ± 0.03 µg_drug·mg^-1_IOL were obtained when varying the supercritical impregnation pressure (8 and 25 MPa) and duration (30 and 240 min) at 308 K. The use of ethanol (5 mol%) as a co-solvent did not influence the impregnation efficiency and was even unfavorable at certain conditions. Even if the implantation of methotrexate loaded IOLs did not lead to a statistically significant variation in the duration required for a full cell coverage of the posterior capsule in the human capsular bag model, it was shown to reduce fibrosis by inhibiting epithelial-mesenchymal transformation. The innovative application presented has the potential to gain clinical relevance.

Preparation and in vitro release kinetics of nitrendipine-loaded PLLA-PEG-PLLA microparticles by supercritical solution impregnation process

In this work, drug-loaded polymer microparticles were prepared by a supercritical solution impregnation (SSI) process with nitrendipine as the model drug and PLLA-PEG-PLLA as the drug carrier. The morphology, size, distribution and functional groups of the drug-loaded microparticles were characterized by scanning electron microscopy (SEM), laser particle size analyzer and fourier transform infrared analysis (FTIR). The effects of pressure, temperature and cosolvent concentration on the drug loading and release property of the microparticles prepared with and without cosolvent were investigated. The in vitro drug release kinetics of drug-loaded microparticles was studied with five models. The results indicated that the morphology of the drug-loaded polymer microparticles was not influenced by the SSI process. And the addition of ethanol cosolvent could significantly improve the drug loading of the microparticles. The most satisfied drug loading and the release properties of the microparticles were achieved under 55 °C, 13 MPa and cosolvent ethanol concentration of 3%. The drug could be released for more than 140 h. The analysis of the drug release kinetics showed that the experimental data fitted with Ritger-Peppas model were optimal. According to the release exponent value, the in vitro release process of the nitrendipine-loaded microparticles was controlled by Fickian diffusion, which can provides a theoretical basis for drug release of this type of experiment.

Supercritical Fluid Technology: An Emphasis on Drug Delivery and Related Biomedical Applications

During the past few decades, supercritical fluid (SCF) has emerged as an effective alternative for many traditional pharmaceutical manufacturing processes. Operating active pharmaceutical ingredients (APIs) alone or in combination with various biodegradable polymeric carriers in high-pressure conditions provides enhanced features with respect to their physical properties such as bioavailability enhancement, is of relevance to the application of SCF in the pharmaceutical industry. Herein, recent advances in drug delivery systems manufactured using the SCF technology are reviewed. We provide a brief description of the history, principle, and various preparation methods involved in the SCF technology. Next, we aim to give a brief overview, which provides an emphasis and discussion of recent reports using supercritical carbon dioxide (SC-CO2 ) for fabrication of polymeric carriers, for applications in areas related to drug delivery, tissue engineering, bio-imaging, and other biomedical applications. We finally summarize with perspectives.

Improving the dissolution rate of hydrophobic drugs through encapsulation in porous lactose as a new biocompatible porous carrier

T he dissolution rates of indomethacin (IMC) and nifedipine (NIF) as poorly water-soluble model drugs have been significantly improved by encapsulating their molecules in the porous structure of engineered-particles of lactose as a new biocompatible porous carrier. The formulation method used in this study utilized a template-based spray-drying technique for in-situ production of porous lactose followed by two solvent-based drug-loading methods: (i) adsorption from organic solution, and (ii) incipient wetness impregnation to incorporate the drugs inside the porous lactose. In both cases, the results of DSC and XRD have revealed the deposition of nano-sized crystals of drugs inside the nanopores due to the nanoconfinement phenomenon. Greater extents of drug loadings have been achieved during the indomethacin adsorption due to the hydrogen-bonding interaction with the surface of lactose, as determined by FTIR spectroscopy. The in vitro release studies in simulated gastric fluid (SGF) have shown faster release rates for the impregnated particles compared with drug-loaded particles via the adsorption method.

Osteogenic poly(ε-caprolactone)/poloxamine homogeneous blends prepared by supercritical foaming

Homogeneous poly(ε-caprolactone) (PCL) and poloxamines (PLXs) porous blends were prepared using a supercritical carbon dioxide-assisted foaming/mixing (SFM) approach aiming to obtain cytocompatible implantable materials presenting tunable morphologies, bioerosion rates, bioactive molecules release and osteogenic features. Pure PCL, pure PLXs (T908 and T1107 varieties) and three distinct PCL:PLX 75:25, 50:50, 25:75% w/w blends, with and without the osteogenic and angiogenic bioactive molecule simvastatin were processed at constant pressure of 20 MPa and temperature of 40 °C or 43 °C, for T1107 and T908, respectively. Obtained porous blends were characterized applying a wide range of techniques and in vitro methods. Calorimetric analysis showed that hydrophilic T908 and T1107 PLXs are miscible with PCL for all tested compositions. Prepared PCL:PLX porous blends rapidly lost mass when immersed into phosphate buffer pH 7.4 due to PLXs dissolution and then went through slow and almost constant erosion rates for the subsequent weeks due to PCL slow hydrolytic degradation, which explains the rapid initial release of simvastatin and its subsequent sustained release for longer periods of time. PCL and PCL:PLX 75:25% w/w porous blends, containing or not simvastatin, showed a high cytocompatibility with SAOS-2 cells. In addition, prepared biomaterials promoted mesenchymal stem cells proliferation and their differentiation into osteoblasts. Overall, obtained results showed novel possibilities of addressing local treatment of small bone defects/fractures using highly porous PCL:PLX homogeneous blends.